Integration of the Food Waste Disposer Unit to the Existing Sewage System

Among the numerous approaches to food waste treatment, the food waste disposers method (FWDs), as a newcomer, has become slowly accepted by the general public owing to the worries about its impact on the existing sewage system. This paper aims to justify the role of FWDs in the process of urbanization in order to better prepare a city to take good care of the construction of its infrastructure and the solid waste treatment. Both the literatures and the case study help to confirm that FWDs has no negative effects on the wastewater treatment plant and it is also environmental friendly by reducing the greenhouse gas emissions. In the case study, the Lappeenranta waste water treatment plant has been selected in order to figure out the possible changes to a WWTP following the integration of FWDs: the observation shows only minor changes take place in a WWTP, in case of 25% application, like BOD up 7%, TSS up 6% and wastewater flowrate up 6%, an additional sludge production of 200 tons per year and the extra yield of methane up to 10000m3 per year; however, when the utilization rate of FWD is over 75%, BOD, TSS, and wastewater flowrate will experience more significant changes, thus exerting much pressure on the existing WWTP. FWDs can only be used in residential areas or cities equipped with consummate drainage network within the service sphere of WWTP, therefore, the relevant authority or government department should regulate the installation frequency of FWDs, while promoting the accessory application of FWDs. In the meanwhile, WWTP should improve their treatment process in order to expand their capacity for sludge treatment so as to stay in line with the future development of urban waste management.

Quasi-objects and actors in the web of belief. Formation of a national nuclear waste management system: the case of Finland

Paper presented in ISA RC23 meeting, Gothenburg July 16th 2010

Hiilijalanjäljen laskeminen purku- ja korjausrakentamiskohteille

Tämä opinnäytetyö on tehty yhteistyössä Lappeenrannan teknillisen yliopiston ja Enviroc Oy:n kanssa. Työn tarkoituksena on ollut kehittää suomalaisiin olosuhteisiin soveltuva laskentamalli purku- ja korjausrakentamiskohteiden hiilijalanjäljelle. Kehitettyä mallia voi käyttää yrityksessä lainsäädännön vaatimusten noudattamisen todentamiseen sekä purku- ja korjausrakentamiskohteiden toimintatapojen vertailuun. Työssä käsitellään purku- ja korjausrakentamiskohteiden hiilijalanjälkeen vaikuttavia asioita, joita ovat työmaan energiankulutus sekä syntyvien jätteiden lajittelu, kuljetukset, käsittely ja hyödyntäminen tai loppusijoitus. Laskentamalli on kehitetty laskemalla esimerkkikohteille hiilijalanjäljet elinkaarimallintamisen avulla. Työssä on tarkasteltu myös vaihtoehtoisia jäteskenaarioita sekä laskentamallin luotettavuutta. Työn lopputuloksena on saatu kolmen eri kokoluokan esimerkkikohteen hiilijalanjäljet ja laskentamallin periaatekaaviot. Jätteiden toimituspisteiden ja jätejakeiden kulkureittien vaihtelevuuden sekä eri kohteista muodostuvien erityyppisten jätejakeiden johdosta yhden kokonaisvaltaisen laskentamallin kehittäminen on haasteellista. Myös tietojen hankinta kohteista ja jatkokäsittelyistä ja etenkin primääritietojen saaminen on ongelmallista. Tämänhetkinen laskentamalli perustuu enimmäkseen sekundääritietoihin ja arvioihin, joten mallin luotettavuuden lisäämiseksi olisi panostettava primääritiedon määrän lisäämiseen. Laskennan perusteella jäteskenaariovaihtoehdoista lajitteleva toimintamalli osoittautui hiilijalanjäljen kannalta suotuisimmaksi pienemmissä kohteissa ja käsittelylaitospainotteinen malli suuressa kohteessa. Merkittäviä tekijöitä kohteiden hiilijalanjälkien muodostumiselle olivat metallien käsittely, jätteiden poltto sekä neitsytraaka-aineista valmistetun teräksen ja fossiilisten polttoaineiden vältetyt päästöt. Merkittävimmiksi kasvihuonekaasuiksi purku- ja korjausrakentamiskohteiden laskennassa osoittautuivat hiilidioksidin lisäksi halogenoidut hiilivedyt ja metaani.

Pohjakuonan käsittelyn ja hyötykäytön toimintamallin muodostaminen Kotkan Energia Oy:n jätteenpolttolaitokselle

Tavoitteena tässä diplomityössä oli selvittää Kotkan Energia Oy:n jätteenpolttolaitoksen toiminnassa syntyvän pohjakuonan hyötykäyttömahdollisuuksia ja kustannuksiltaan järkevin tapa käsitellä pohjakuona. Tarkasteltavia vaihtoehtoja hyötykäytön osalta olivat erilaiset maarakennustyöt sekä kaatopaikkojen peittäminen. Hyötykäyttövaihtoehdoille vaihtoehtoisena ratkaisuna tutkittiin kaatopaikkasijoituksen kannattavuutta. Pohjakuonan käyttöä maarakentamisessa, jätetäyttöjen peitemaina sekä pohjakuonan loppusijoitusta kaatopaikoille säätelee lainsäädäntö. Valtioneuvoston asetuksessa kaatopaikoista on määritelty loppusijoitettaville jakeille liukoisuus raja-arvot, joiden mukaisesti jätteet sijoitetaan joko pysyvän jätteen, tavanomaisen jätteen tai ongelmajätteen kaatopaikoille. Jätetäyttöjen peitemateriaalina käytettävän jakeen on myös täytettävä kyseisen kaatopaikkaluokan liukoisuusraja-arvot. Maarakennusasetus antaa puolestaan liukoisuus- ja pitoisuusraja-arvot maarakennuksessa hyödynnettäville jakeille. Pohjakuonan hyötykäyttö vaatii kuitenkin aina ympäristöluvan. Hyötyvoimalan pohjakuonasta tehtyjen analyysien perusteella voidaan todeta, että käsiteltyä pohjakuonaa olisi mahdollista käyttää esimerkiksi kenttien ja kaatopaikkojen pohjarakenteissa sekä kaatopaikoilla jätetäyttöjen peitemaina. Pohjakuonan hyödyntäminen kaukolämpötöiden maarakennuksessa vaatii vielä lisätutkimuksia putkien korroosioriskin osalta. Diplomityön tuloksena kehitettiin toimintamalli, jonka avulla Kotkan Energia Oy:n on mahdollista säästää kuonan käsittelyn ja hyötykäytön kustannuksissa. Kustannuksiltaan parhaaksi vaihtoehdoksi osoittautui kuonan käsittely omalla biopolttoaineiden välivarastolla sekä käsitellyn pohjakuonan hyödyntäminen välivaraston pohjarakenteissa. 

Industrial solid waste (whitewash mud) use in forest road pavements

The objective of the present study was to evaluate the effects of industrial solid waste (whitewash mud) on geotechnical properties considering the following engineering parameters: California Bearing Ratio (CBR), Atterberg limits and Permeability test. Seven soil samples derived from Alagoinhas, Bahia - Brazil, were classified by the Transportation Research Board (TRB) system. Two were selected as having a great geotecnical potential classified as A-3 (0) and A-2-4 (0), whitewash mud contents 10%, 15%, 20% and 25% dry weight and medium compaction effort were studied in the laboratory testing program. The results indicated the soil denominated good gravel as being the most promising one, when stabilized with whitewash mud, reaching the best results with the dosage of 20 and 25% of whitewash mud.

Waste Stream Investigation from Perspective of Changing Waste Legislation at Green Sand Foundries

The update of the Finnish legislation concerning waste was unavoidable, to comply with the European Union (EU) requirements defined in the EU-Directive on Waste. The new waste law updates were enacted into the Finnish legislation on the 11.03.2011 and targeted for applicability by the 11.03.2012. This thesis investigates the implications of the new amendments to the waste legislation from the perspective of green sand foundries. The investigations are conducted by comparing two of Componenta’s green sand foundries and evaluating their waste streams. Additionally, the impacts of legislation amendments are critiqued on their environmental and economic aspects. The study’s comparison of waste fractions at the two foundries reveals that sand is dominant in absolute tonnage and costs. The increments of waste taxes forces foundries to focus on waste management, recycling and disposing. The new legislation’s promotion of material efficiency, also guides foundries towards the prevention of waste. A potential preventive measure is to regenerate waste sand resulting to cost savings on both raw-materials and waste management. However, the lack of absolute targets for waste prevention or recycling rates discourages the interests towards creating or adopting new technologies and methods for the waste handling.

BIOMASS SUPPLY CHAIN ANALYSIS WITH DENSIFIED WASTE

ABSTRACT The possibility to vary the energy matrix, thus reducing the dependency on fossil fuels, has amplified the acceptance of biomass as an alternative fuel. Despite being a cheap and renewable option and the fact that Brazil is a major producer of waste from agriculture and forestry activities, the use of these materials has barriers due to its low density and low energetic efficiency, which can raise the costs of its utilization. Biomass densification has drawn attention due to its advantage in comparison to in natura biomass due to its better physical and combustion characteristics. The objective of this paper is to evaluate the impact of biomass densification in distribution and transport costs. To reach this objective, a mathematical model was used to represent decisions at a supply chain that coordinates the purchase and sale of forestry and wood waste. The model can evaluate the options to deliver biomass through the supply chain combining demand meeting and low cost. Results point to the possibility of an economy of 60% in transport cost and a reduction of 63% in the required quantity of trucks when densified waste is used. However, costs related to the densifying process lead to an increase of total supply costs of at least 37,8% in comparison to in natura waste. Summing up, the viability of biomass briquettes industry requires a cheaper densification process.

Recycling of nutrients with application of organic waste in degraded pasture

The utilization of organic wastes represents an alternative to recover degraded pasture. The experiment aimed to assess the changes caused by the provision of different organic waste (poultry litter, turkey litter and pig manure) in a medium-textured Oxisol in Brazilian Savanna under degraded pasture. It was applied different doses of waste compared to the use of mineral fertilizers and organic mineral and evaluated the effect on soil parameters (pH, organic matter, phosphorus and potassium) and leaf of Brachiariadecumbens (crude protein, phosphorus and dry mass production). It was observed that application of organic waste did not increase the level of soil organic matter and pH in the surface layer, and the application of turkey litter caused acidification at depths of 0.20-0.40 m and 0.40-0.60 m. There was an increase in P and K in the soil with the application of poultry litter and swine manure. All organic wastes increased the productivity of dry matter and crude protein and phosphorus. The recycling of nutrients via the application of organic waste allows efficiency of most parameters similar to those observed with the use of mineral sources, contributing to improving the nutritional status of soil-plantsystem.

Removal of nitrogen, phosphorus, copper and zinc from swine breeding waste water by bermudagrass and cattail in constructed wetland systems

This work aimed to study the agronomic performance and capacity of nutrient removal by bermudagrass (Cynodon spp.) and cattail (Typha sp.) when grown in constructed wetlands systems (CWSs) of vertical and horizontal flow, respectively, used in the post-treatment of swine breeding wastewater (ARS). The average yield of dry matter (DM) of bermudagrass in sections of 60-day interval ranged from 14 to 43 t ha-1, while the cultivated cattail produced in a single cut after 200 days of cultivation between 45 and 67 t ha-1 of DM. Bermudagrass extracted up to 17.65 kg ha-1 d-1 of nitrogen, 1.76 kg ha-1 d-1 of phosphorus, 6.67 g ha-1 d-1 of copper and 54.75 g ha-1 d-1 of zinc. Cattail extracted up to 5.10 kg ha-1 d-1 of nitrogen, 1.07 kg ha-1 d-1 of phosphorus, 1.41 g ha-1 d-1 of copper and 16.04 g ha-1 d-1 of zinc. Cattail and bermudagrass were able to remove, respectively, 5.0 and 4.6% of the nitrogen and 11.2 and 5.4% of the phosphorus applied via ARS, being less efficient in extracting N and P when the initial intake of these nutrients is evaluated.

Potential of biogas production from swine manure supplemented with glycerine waste

In this study, was studied the biogas generation from swine manure, using residual glycerine supplementation. The biogas production by digestion occurred in the anaerobic batch system under mesophilic conditions (35°C), with a hydraulic retention time of 48 days. The experiment was performed with 48 samples divided into four groups, from these, one was kept as a control (without glycerin) and the other three groups were respectively supplemented with residual glycerine in the percentage of 3%, 6% and 9% of the total volume of the samples. The volume of biogas was controlled by an automated system for reading in laboratory scale and the quality of the biogas (CH4) measured from a specific sensor. The results showed that the residual glycerine has high potential for biogas production, with increases of 124.95%, 156.98% and 197.83% in the groups 3%, 6% and 9%, respectively, relative to the sample control. However, very high organic loads can compromise the process of digestion affecting the quality of the biogas generated in relation to methane.

Technology for sugarcane agroindustry waste reuse as granulated organomineral fertilizer

Aiming to evaluate the use of sugarcane industry waste such as byproducts from vinasse concentration process, it was assessed the organomineral fertilizer BIOFOM (concentrated vinasse, filter cake, boiler ash, soot from chimneys and supplemented with mineral fertilizers). The study included characterization and agronomic potential analysis of a test plant (corn), by noting the differences between mineral fertilizers and BIOFOM fertilization until 45 days after sowing. The technology traditionally used to produce BIOFOM was based on vinasse evaporation with high heat transfer coefficients. It was observed that the technology, which can be formulated according to the needs of any crop, could be used in many cases as mineral fertilizer. Therefore, the use of this organomineral fertilizer reduces waste generation of sugarcane industry.

CHARACTERIZATION AND EVALUATION OF THE POTENTIAL USE OF SLUDGE FROM STP AND WTP IN PAVING

ABSTRACT Water and sewage treatment plants (STP and WTP) generate as byproduct a significant amount of sludge with environment harmful elements. Sending to landfills or depositing on the ground or rivers are respectively expensive and dangerous alternatives. In this scenario, the use of this waste in paving processes is a promising alternative for disposal thereof. In this study, we focused on characterizing sludge and evaluating its use in paving, which showed satisfactory results for use in base and sub-base floors.

KNOWLEDGE ON ADJUVANT PROPERTIES, DISPOSAL OF PESTICIDERESIDUES AND SPRAY DRIFT OCCURRENCE IN THE STATE OF MATO GROSSO

ABSTRACT This paper aimed at investigating the knowledge level of people working on pesticide spraying activities concerning spray adjuvant properties, as well as collecting information on disposal locations for residues from internal spray tank cleaning, and finally the understanding of pesticide spray drift occurrence in the state of Mato Grosso, Brazil. The information was gathered through a questionnaire answered by participants of a rural extension program in application technology located in nineteen grain and fiber producing regions of Mato Grosso state. Among the mentioned adjuvants, 49.0% belonged to the mineral oil class and 17.9% of participants did not know the functions performed by such products. In addition, 58.5% of the participants discarded residues into the field. Among the participants who answered the question about spray drift occurrence causes, 54.1% indicated problems relating to inadequate weather conditions. In conclusion, there is a lack of knowledge on adjuvant functions, besides of inappropriate residue disposal in the state of Mato Grosso. Spray drift was referred as a problem; however, most of participants were not able to discuss the causes of these losses.

Detection of illegal estrogen administration through immunohistochemical markers in the bovine prostate

The immunodetection of diverse cell markers was evaluated in prostatic samples from bullocks, and bullocks showing epithelial hyperplasia-metaplasia, with oestrogen-induced changes, and in experimental samples from bullocks inoculated with dietylstilbestrol (DES). Antigen-retrieval procedures allowed the use of tissues that had been fixed in formalin for long periods. Three tissue markers were chosen for the study: cytokeratins 13 and 16, vimentin and desmin. Monoclonal antibody K8.12 (specific for cytokeratins 13 and 16) stained basal cells and hyperplastic-metaplastic epithelium; monoclonal antivimentin, and desmin, allowed the definition of fibromuscular changes.

Current status of the waste-to-energy chain in the County of North Savo, Finland

The aim of this report is to describe the current status of the waste-to-energy chain in the province of Northern Savonia in Finland. This work is part of the Baltic Sea Region Programme project Remowe-Regional Mobilizing of Sustainable Waste-to-Energy Production (2009-2012). Partnering regions across Baltic Sea countries have parallelly investigated the current status, bottle-necks and needs for development in their regions. Information about the current status is crucial for the further work within the Remowe project, e.g. in investigating the possible future status in target regions. Ultimate result from the Northern Savonia point of view will be a regional model which utilizes all available information and facilitates decision-making concerning energy utilization of waste. The report contains information on among others: - waste management system (sources, amounts, infrastructure) - energy system (use, supply, infrastructure) - administrative structure and legislation - actors and stakeholders in the waste-to-energy field, including interest and development ideas The current status of the regions will be compared in a separate Remowe report, with the focus on finding best practices that could be transferred among the regions. In this report, the current status has been defined as 2006-2009. In 2009, the municipal waste amount per capita was 479 kg/inhabitant in Finland. Industrial waste amounted 3550 kg/inhabitant, respectively. The potential bioenergy from biodegradable waste amounts 1 MWh/inhabitant in Northern Savonia. This figure includes animal manure, crops that would be suitable for energy use, sludge from municipal sewage treatment plants and separately collected biowaste. A key strategy influencing also to Remowe work is the waste plan for Eastern Finland. Currently there operate two digestion plants in Northern Savonia: Lehtoniemi municipal sewage treatment sludge digestion plant of Kuopion Vesi and the farm-scale research biogas plant of Agrifood Research Finland in Maaninka. Moreover, landfill gas is collected to energy use from Heinälamminrinne waste management centre and Silmäsuo closed landfill site, both belonging to Jätekukko Oy. Currently there is no thermal utilization of waste in Northern Savonia region. However, Jätekukko Oy is pretreating mixed waste and delivering refuse derived fuel (RDF) to Southern Finland to combustion. There is a strong willingness among seven regional waste management companies in Eastern Finland to build a waste incineration plant to Riikinneva waste management centre near city of Varkaus. The plant would use circulating fluidized bed (CFB) boiler. This would been a clear boost in waste-to-energy utilization in Northern Savonia and in many surrounding regions.