Análise de componentes principais para características de crescimento em bovinos de corte

The objetive of this research was to study the relation among body weight and average daily gain in different ages, using principal components analysis. Data on 1663 birth weight (BW), weaning weight adjusted to 230 days (WW), yearling weight adjusted to 365 days (YW), long yearling weight adjusted to 550 days (LYW), average daily gain from birth to weaning (AGW), average daily gain from weaning to 365 days (AGY) and average daily gain from 365 days weight to 550 day weight (AGL) from crossbred animals, and data on 320 observations of the same traits from straightbreed Nellore animals were analysed. The model included the fixed effects of breed (only crossbred data), contemporary group, and linear and quadratic effects of age at calving. For body weight in different ages, the first principal component contrasted heavier and light animals after birth and explained about 79,0% and 78,0% of the variation for data on crossbred and Nellore animals, respectively. The second principal component compared heavier animals at weaning and yearling weight those at long yearling weight. It explained around 13,5% and 15,5% of the total variation, respectively, for data on F1 and Nellore breed. The major source of variation among animals on the two data set for body weight was due to differences in weight followed by differences in the ages they got those weight. For the traits expressed as average daily gain, the variation among animals was due to differences in birth season, the first principal component explaining about 52,0% of the variation on crossbred animals. This component compared animal with higher AGY with those with higher AGW and AGL. For data on Nellore breed, the first component explain about 56,0% of the total variation and also compared animals with higher AGY with those with higher AGW and AGL.

Influência da geometria de corte no torneamento do eucalipto sp

In contrast to what happened in the past where it was possible to select which species had a lower degree of variation, it is now necessary to use fast-growing species with efficient processing. For that we use the wood of Eucalyptus sp and studies related to the machining processes and their parameters such as wear of cutting tools and roughness. The present work aims to analyze the influence of geometry of cutting tools of high speed steel and the influence of the diameter of the final pieces in the process of turning wood of Eucalyptus sp in relation to power consumption, roughness, temperature machining, chip formed and wear of cutting tools. It was observed that the smaller the diameter of the end parts and greater wear of the tools, the worse quality of the machined surfaces and the greater the power consumed in the process of machining

Valor de corte para teste respiratório com isótopos estáveis (Carbono 13) no diagnóstico do Helicobacter pylori utilizando IRMS para análise do sopro

After the isolation of Helicobacter pylori from an injury at the stomach mucosa by Marshall and Wareen, work that was recognized with the Nobel Prize of Medicine or Physiology in 2005, many other works showed the relationship between the presence of H. pylori and diseases at the digestive system, such as gastritis, gastric, duodenal and peptic ulcer, and stomach cancer. The 13C-Urea Breath Test - 13C-UBT is a non-invasive diagnostic method that utilizes the breath of a patient to determine the presence of H. pylori through stable isotopes. This work aimed to find an ideal 13C-UBT Isotopic Ratio Mass Spectroscopy cut-off value (a threshold between positive and negative) to diagnose H. pylori infection at Brazilian population. Patients were selected at the UNESP-Botucatu Clinical Hospital Endoscopy Section. With these results it was possible to indicate that the best cut-off value is between 2.5 to 6 ‰ of Delta Over Baseline (DOB)

Efeito da aplicação do fluido de corte na usinagem da superliga Nimonic 80A

The nickel alloys have a chemical composition with high tenor of alloy elements which are responsible for the material's mechanical and thermal properties, but also are the main causative of problems during the machining, making the process difficult. The objective of this work is the study of the machining by external cylindrical turning of the nickel based alloy Nimonic 80A, seeking the machining optimization of this alloy, seeking the best condition of lubricant fluid use, providing real increases of productivity without the need of investments in new production means. Besides, the results of this work should offer more detailed information regarding the behavior of this alloy in relation to machining by turning. The machining experiences were accomplished in a specimen of the nickel alloy, considering the machining parameters: cutting speed (75 and 90 m/min), cutting depth (0,8 mm) and feed rate (0,15 and 0,18 mm/v). The valuations were accomplished in a CNC lathe and tools with of hard metal inserts. After each stage of the turning the measures of the cutting length were accomplished, of the waste of the tools through a magnifying glass (8x) and the roughness of the specimen evaluated in each phase of the process, with the aid of a portable roughness meter. Through light optical microscopy it was possible to observe the wear of the cutting tools for each appraised condition. The roughness values, Ra and Ry, for the appraised conditions were always superiors to the theoretical values. After analysis of the results it was possible to end that, the best acting for this work strip tested it was obtained for ap=0,8mm: f=0,15mm/rev and VC=75m/min, what resulted in a larger cutting length (1811 m)

Influência de software de otimização de corte no rendimento de serraria da região sudoeste paulista

This study aimed to analyze the increase of yield provided by a software optimization cutting in a pine sawmill, located at southwest region of São Paulo, city of Itapeva. First were measured 10 logs that were processed by conventional sawing system by measuring the volume of products in the process output. Then using a cutting optimization software, that generated cuts diagrams, 10 logs, from 25 to 26 cm diametrical class, were processed by sawing system optimized. For the conventional sawing, the value found to yield was 41.80%, whereas for the unfolding optimized showed the value of 61.79%, resulting in a difference of 19.99%. This study shows that there is room for significant improvement of performance in sawmills sawing with the use of optimization software as the employee at work

Utilização de gonadotropina coriônica equina em protocolos de inseminação artificial em tempo fixo em bovinos de corte

Current cattlemen must seek methods to maximum reproductive efficiency of their beef herds, making the business competitive and enhancing greater profitability. For the cow-calf producers, efficiency translates into more cows producing one calf every year. Fixed-time artificial insemination (TAI) is one of several technologies that producers utilize to reach this goal. Postpartum anestrus is one of the biggest obstacles to overcome in order to obtain suitable results at the end of the breeding season. The TAI protocols are efficient in re-establishing cyclicity in noncycling cows during the postpartum period, streamlining the use of labor on farms, allowing the use of artificial insemination (AI) on a large scale, and introducing superior genetics to the herd. The protocols that are most commonly used in Brazil are based on progesterone (P4) releasing devices that prevent premature estrus and ovulation; and estradiol (E2) to synchronize the initiation of a new follicular wave. In such protocols, administration of equine chorionic gonadotropin (eCG) helps the development of the follicle, increases ovulation rate, improves the endocrine and uterine environment during proestrus and diestrus, and improves fertility. The use of eCG in TAI protocols for suckled cows, non-lactating cows and heifers increases the pregnancy rate allowing more calves at the end of the breeding season and higher profitability to the cattlemen

Efeito da variação da velocidade de corte e de avanço no torneamento de Eucalipto

Due to the rapid development of some species such as pine and eucalyptus and a growing demand for raw materials, timber, there was a need for detailed studies to better use and higher quality in products derived from wood. In order to contribute to to better utilization of wood ,this study aims to analyze the quality of the wood surface after machining Corymbia citrodora around, with varying feed rates (40, 70, 100 mm/mim), shear rate (1.88, 2.19, 2.51 m/s) and with the use of inserts for turning new and used (cemented carbide). 18 were used bodies and each body was made three different assays for each test were a total of 54 tests three replicates. This study will also addres the analysis of power consumption for each of the tests. With the results obtained through experiments, including the surface roughness of parts and power consumption for each test, we try to evaluate the power consumption in machining with the variations in cutting speed and feed, with two tools carbide

Método de Taguchi aplicado a um processo de corte por fusão de um tecido sintético

A company must have full knowledge and control of its operations so as to meet the market requirements and meet their production goals. Thus this paper uses the Taguchi method to extend the operational control of a cutting process by fusion of a synthetic fabric in the longitudinal direction. For process analysis and tracking of possible causes of the problem techniques of Production Engineering as the cause and effect diagram, also known as Ishikawa diagram, and design of experiments were used, the last one was applied to the design techniques of Taguchi. Finally the preparation method of understanding and design of experiment was due to the use of the software MINITAB v15 ®, which showed that the speed of rolling the fabric after cutting is crucial for controlling the entire operation

Estudo da influência da aplicação do fluido de corte no torneamento da liga de alumínio AA7075

One of the ways to minimize the effects of unproductive time caused by tool wear can be achieved by introducing an efficient system of lubrication and cooling in the process. However, in the last decade the research had the goal to restrict the maximum use of refrigerants and / or lubricants in metal-mechanical production. The important factors that justify this procedure include the operational costs of production, ecological issues, and the legal requirements of environmental conservation and preservation of human health. The purpose of the proposed work is the study of machining by turning with the focus on the influence caused by the application of cutting fluid in several ways of application (abundant and MQF) and also by comparing the results obtained by machining without the presence of fluid . For this purpose, the turning tests are conducted using an aluminum alloy (AA 7075). The response variables to be analyzed were obtained from the roughness (Ra and Ry), the stresses presented (VB) and their progression in relation to the cutting length achieved, the type of chip formed, in addition to changes in the degree of finish (roughness) presented by the turned parts. The results of this study should provide more detailed information about the actual influence of cutting fluids in turning this alloy, which are characterized by high rates of deformation when the formation of damaging your chip machining and also the quality of surface generated. Therefore, it is expected to provide subsidies to promote the optimization of machining this alloy making the most of the role of cutting fluid

Práticas sanitárias e percepção de risco de produtores de bovinos de corte no Pantanal de Mato Grosso do Sul

Pós-graduação em Medicina Veterinária - FCAV

Fatores socioeconômicos e percepção de risco de produtores de gado de corte no uso de produtos veterinários

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ações judiciais de Plínio, o jovem, no Tribunal dos Centúnviros e na Corte Senatorial (séculos I-II d.C.)

Pós-graduação em História - FCHS

As relações entre as forças armadas e a sociedade uruguaia no governo de Tabaré Vásquez

Pós-graduação em História - FCHS

Acurácia e precisão na formulação não linear de ração para frangos de corte: avanço e otimização de resultados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Um problema de corte de estoque multiobjetivo

In this paper we deal with the one-dimensional integer cutting stock problem, which consists of cutting a set of available objects in stock in order to produce ordered smaller items in such a way as to optimize a given objective function, which in this paper is composed of three different objectives: minimization of the number of objects to be cut (raw material), minimization of the number of different cutting patterns (setup time), minimization of the number of saw cycles (optimization of the saw productivity). For solving this complex problem we adopt a multiobjective approach in which we adapt, for the problem studied, a symbiotic genetic algorithm proposed in the literature. Some theoretical and computational results are presented.