Construction and validation of a scoring system for the selection of high-quality data in a Spanish population primary care database (SIDIAP)

Background Computerised databases of primary care clinical records are widely used for epidemiological research. In Catalonia, the InformationSystem for the Development of Research in Primary Care (SIDIAP) aims to promote the development of research based on high-quality validated data from primary care electronic medical records. Objective The purpose of this study is to create and validate a scoring system (Registry Quality Score, RQS) that will enable all primary care practices (PCPs) to be selected as providers of researchusable data based on the completeness of their registers. Methods Diseases that were likely to be representative of common diagnoses seen in primary care were selected for RQS calculations. The observed/ expected cases ratio was calculated for each disease. Once we had obtained an estimated value for this ratio for each of the selected conditions we added up the ratios calculated for each condition to obtain a final RQS. Rate comparisons between observed and published prevalences of diseases not included in the RQS calculations (atrial fibrillation, diabetes, obesity, schizophrenia, stroke, urinary incontinenceand Crohn’s disease) were used to set the RQS cutoff which will enable researchers to select PCPs with research-usable data. Results Apart from Crohn’s disease, all prevalences were the same as those published from the RQS fourth quintile (60th percentile) onwards. This RQS cut-off provided a total population of 1 936 443 (39.6% of the total SIDIAP population). Conclusions SIDIAP is highly representative of the population of Catalonia in terms of geographical, age and sex distributions. We report the usefulness of rate comparison as a valid method to establish research-usable data within primary care electronic medical records

Integration of Real-Time Simulator, Motion Platform and Haptics

This thesis describes the process of the integration of a real-time simulator environment with a motion platform and a haptic device as a part of the Kvalive project. Several programs running on two computers were made to control the different devices of the environment. User tests were made to obtain information of needed improvements to make the simulator more realistic. Also new ideas for improving the simulator and directions of further research were obtained with the help of this research.

Integrating distributed generation and Smart Grids into single-family house

This study examines Smart Grids and distributed generation, which is connected to a single-family house. The distributed generation comprises small wind power plant and solar panels. The study is done from the consumer point of view and it is divided into two parts. The first part presents the theoretical part and the second part presents the research part. The theoretical part consists of the definition of distributed generation, wind power, solar energy and Smart Grids. The study examines what the Smart Grids will enable. New technology concerning Smart Grids is also examined. The research part introduces wind and sun conditions from two countries. The countries are Finland and Germany. According to the wind and sun conditions of these two countries, the annual electricity production from wind power plant and solar panels will be calculated. The costs of generating electricity from wind and solar energy are calculated from the results of annual electricity productions. The study will also deal with feed-in tariffs, which are supporting systems for renewable energy resources. It is examined in the study, if it is cost-effective for the consumers to use the produced electricity by themselves or sell it to the grid. Finally, figures for both countries are formed. The figures include the calculated cost of generating electricity from wind power plant and solar panels, retail and wholesale prices and feed-in tariffs. In Finland, it is not cost-effective to sell the produced electricity to the grid, before there are support systems. In Germany, it is cost-effective to sell the produced electricity from solar panels to the grid because of feed-in tariffs. On the other hand, in Germany it is cost-effective to produce electricity from wind to own use because the retail price is higher than the produced electricity from wind.

Point sampling with uniformly distributed lines

In this paper we address the problem of extracting representative point samples from polygonal models. The goal of such a sampling algorithm is to find points that are evenly distributed. We propose star-discrepancy as a measure for sampling quality and propose new sampling methods based on global line distributions. We investigate several line generation algorithms including an efficient hardware-based sampling method. Our method contributes to the area of point-based graphics by extracting points that are more evenly distributed than by sampling with current algorithms

Implementation and Integration of New Baggage Logistic Centre at HelsinkiVantaa Airport

This thesis deals with improving international airport baggage supply chain management (SCM) by means of information technology and new baggage handling system. This study aims to focus on supply chain visibility in practice and to suggest different ways to improve the supply chain performance through information sharing. The objective is also to define how radio frequency identification (RFID) and enterprise resource planning (ERP) can make processes more transparent. In order to get full benefits from processes, effective business process management and monitoring as well as the key performance indicators must be defined, implemented and visualized through e.g. dashboard views for different roles. As an outcome of the research the need for the use of information technology systems and more advanced technologies, e.g. RFID in the supply chain management is evident. Sophisticated ERP is crucial in boosting SCM business processes and profitability. This would be beneficial for dynamic decision making as well in the airport and airline supply chain management. In the long term, economic aspects support the actions I have suggested in order to make production more flexible in reacting to quick changes.

Supplier relationship management capability in the firm's global integration

Organizing is a general problem for global firms. Firms are seeking a balance between responsiveness at the local level and efficiency through worldwide integration. In this, supply management is the focal point where external commercial supply market relations are connected with the firm's internal functions. Here, effective supplier relationship management (SRM) is essential. Global supply integration processes create new challenges for supply management professionals and new capabilities are required. Previous research has developed several models and tools for managers to manage and categorize different supplier relationship types, but the role of the firm's internal capability of managing supplier relationships in their global integration has been a clearly neglected issue. Hence, the main objective of this dissertation is to clarify how the capability of SRM may influence the firm's global competitiveness. This objective is divided into four research questions aiming to identify the elements of SRM capability, the internal factors of integration, the effect of SRM capability on strategy and how SRM capability is linked with global integration. The dissertation has two parts. The first part presents the theoretical approaches and practical implications from previous research and draws a synthesis on them. The second part comprises four empirical research papers addressing the research questions. Both qualitative and quantitative methods are utilized in this dissertation. The main contribution of this dissertation is that it aggregates the theoretical and conceptual perspectives applied to SRM research. Furthermore, given the lack of valid scales to measure capability, this study aimed to provide a foundation for an SRM capability scale by showing that the construct of SRM capability is formed of five separate elements. Moreover, SRM capability was found to be the enabler in efforts toward value chain integration. Finally, it was found that the effect of capability on global competitiveness is twofold: it reduces conflicts between responsiveness and integration, and it creates efficiency. Thus, by identifying and developing the firm's capabilities it is possible to improve performance, and hence, global competitiveness.

Identification of acetates in elasmopalpulus lignosellus pheromone glands using a newly created mass spectral database and kóvats retention indices

Based on a specially created mass spectral database utilizing 23 tetradecenyl and 22 hexadecenyl acetate standards along with Kóvats retention indices obtained on a very polar stationary phase [poly (biscyanopropyl siloxane)] (SP 2340), (Z)-9-hexadecenyl acetate, (Z)-11-hexadecenyl acetate and (E)-8-hexadecenyl acetate were identified in active pheromone extracts of Elasmopalpus lignosellus. This identification was more efficient than our previous study using gas chromatography/mass spectrometry with a dimethyl disulfide derivative where we could only identify the first two acetates. The acetate composition of the pheromone gland differed from region to region in Brazil and from that from the Tifton (GA, USA) population, suggesting polymorphism or a different sub-species.

Sistema per gestionar les incidències d'un servei d'informàtica amb una arquitectura J2EE distribuïda en tres nivells

Tant en la meva etapa d’estudiant com en la meva curta vida laboral, he participat en el desenvolupament de varies aplicacions de gestió, tant d’escriptori com web, que majoritàriament sempre estaven dividides en tres capes però en dos nivells: la base de dades i l’aplicació, que contenia tant la lògica de negoci com la vista. Des de fa temps he tingut la curiositat i la necessitat d’intentar desenvolupar una aplicació de gestió que estigui distribuïda en tres o més nivells, separant el model de dades i la lògica de negoci de la vista. Crec que el treball de fi de carrera és idoni per desenvolupar-la. L’aplicació a desenvolupar anirà destinada a la gestió d’un servei d’informàtica, que s’encarrega de resoldre les incidències, inventariar i realitzar el manteniment preventiu dels equips informàtics d’una o de varies empreses. Es crearà una aplicació que contindrà el model de dades i la lògica de negoci. També es crearan dues aplicacions clients: una aplicació d’escriptori que donarà accés a totes i cadascuna de les funcionalitats del sistema i una aplicació web que oferirà un accés lleuger i des de qualsevol ubicació a les funcionalitats d’explotació del sistema. Per últim, també es crearà una altre aplicació web que s’encarregarà de generar els llistats sol•licitats per les dues aplicacions clients. D’aquesta manera també es centralitzarà la gestió dels llistats de les aplicacions del sistema. Per desenvolupar el sistema, s’utilitzarà la plataforma J2EE de Java, i es comptarà amb l’ajuda de marcs de treball com, per exemple, Oracle ADF o JasperReports. Com a conclusió general, puc assegurar que si es distribueixen les tres capes d’un sistema en tres nivells s’obtenen beneficis en l’administració, en el manteniment, en l’escalabilitat, en la flexibilitat i en la reutilització de les aplicacions. El principal inconvenient és el possible augment de lentitud en les aplicacions clients.

Aplicatiu per gestionar la informació administrativa, tècnica i comptable per una empresa constructora

Les tendencies del mercat actual i futur obliguen a les empreses a ser cada vegada més competitives. Tota empresa que desitgi competir en el mercat actual ha de considerar la informació com un dels seus principals actius. Per aquesta raó, és necessari que l’empresa disposi dels sistemes d’informació adequats per ser gestionada. En les pimes ( petites i mitjanes empreses ), i en la majoria dels casos, la seva informació es troba repartida en diversos aplicatius informàtifcs. Això comporta principalment una duplicitat de dades, costos de manteniment i possibles errades en la informació. Dins del sector de les pimes, es troben empreses contructores d’un volum petit o mig, les quals enmagatzemen molta informació tècnica i de planificació per desemvolupar els seus projectes. Aquesta necessitat els hi suposa, tenir un aplicatiu eficient per la gestió i seguiment de la producció de les seves tasques i per altra banda l’aplicatiu necessari com qualsevol pime a nivell administratiu i comptable. L’objectiu principal d’aquest treball és generar un aplicatiu que integri la informació administrativa, comptable i tècnica per una empresa constructora. Amb l’assoliment d’aquest objectiu l’empresa constructora guanya temps en l’entrada i accés a les dades, evita la seva duplicitat i redueix el seu manteniment. En resum, redueix els costos de l’empresa i augmenta la seva seguretat en la informació. Un el mercat, existeixen aplicatius anomenats ERP ( Enterprise resource planning o sistemes de planificació de recursos ) els quals la seva gran virtud es la integració de les dades. Aprofitant aquests aplicatius i seleccionant-ne el més adequat, s’ha generat la part de gestió i planificació necessària per l’empresa constructora integrant-la i personalitzant-la en els processos existents de l’aplicació ( comptabilitat, ventes, compres, recursos humans, magatzems, etc… ) Entre les conclusions més rellevants obtingudes en aquest treball, voldriem destacar la millora i reducció d’entrada, accés i manteniment de la informació, l’històric que proporciona l’eina i per tan la millora de la gestío i planificació de l’empresa.

Introducing Continuous Integration for C and C++ Software Development Projects on Linux Platform

Software integration is a stage in a software development process to assemble separate components to produce a single product. It is important to manage the risks involved and being able to integrate smoothly, because software cannot be released without integrating it first. Furthermore, it has been shown that the integration and testing phase can make up 40 % of the overall project costs. These issues can be mitigated by using a software engineering practice called continuous integration. This thesis work presents how continuous integration is introduced to the author's employer organisation. This includes studying how the continuous integration process works and creating the technical basis to start using the process on future projects. The implemented system supports software written in C and C++ programming languages on Linux platform, but the general concepts can be applied to any programming language and platform by selecting the appropriate tools. The results demonstrate in detail what issues need to be solved when the process is acquired in a corporate environment. Additionally, they provide an implementation and process description suitable to the organisation. The results show that continuous integration can reduce the risks involved in a software process and increase the quality of the product as well.

Sustainable Waste-to-Energy Production: Performance Evaluation of Distributed Generation fuelled by Landfill Gas

The environmental impact of landfill is a growing concern in waste management practices. Thus, assessing the effectiveness of the solutions implemented to alter the issue is of importance. The objectives of the study were to provide an insight of landfill advantages, and to consolidate landfill gas importance among others alternative fuels. Finally, a case study examining the performances of energy production from a land disposal at Ylivieska was carried out to ascertain the viability of waste to energy project. Both qualitative and quantitative methods were applied. The study was conducted in two parts; the first was the review of literatures focused on landfill gas developments. Specific considerations were the conception of mechanism governing the variability of gas production and the investigation of mathematical models often used in landfill gas modeling. Furthermore, the analysis of two main distributed generation technologies used to generate energy from landfill was carried out. The review of literature revealed a high influence of waste segregation and high level of moisture content for waste stabilization process. It was found that the enhancement in accuracy for forecasting gas rate generation can be done with both mathematical modeling and field test measurements. The result of the case study mainly indicated the close dependence of the power output with the landfill gas quality and the fuel inlet pressure.

The Detector Control Systems for the CMS Resistive Plate Chamber at LHC

The RPC Detector Control System (RCS) is the main subject of this PhD work. The project, involving the Lappeenranta University of Technology, the Warsaw University and INFN of Naples, is aimed to integrate the different subsystems for the RPC detector and its trigger chain in order to develop a common framework to control and monitoring the different parts. In this project, I have been strongly involved during the last three years on the hardware and software development, construction and commissioning as main responsible and coordinator. The CMS Resistive Plate Chambers (RPC) system consists of 912 double-gap chambers at its start-up in middle of 2008. A continuous control and monitoring of the detector, the trigger and all the ancillary sub-systems (high voltages, low voltages, environmental, gas, and cooling), is required to achieve the operational stability and reliability of a so large and complex detector and trigger system. Role of the RPC Detector Control System is to monitor the detector conditions and performance, control and monitor all subsystems related to RPC and their electronics and store all the information in a dedicated database, called Condition DB. Therefore the RPC DCS system has to assure the safe and correct operation of the sub-detectors during all CMS life time (more than 10 year), detect abnormal and harmful situations and take protective and automatic actions to minimize consequential damages. The analysis of the requirements and project challenges, the architecture design and its development as well as the calibration and commissioning phases represent themain tasks of the work developed for this PhD thesis. Different technologies, middleware and solutions has been studied and adopted in the design and development of the different components and a big challenging consisted in the integration of these different parts each other and in the general CMS control system and data acquisition framework. Therefore, the RCS installation and commissioning phase as well as its performance and the first results, obtained during the last three years CMS cosmic runs, will be

Financial integration and TARGET2-Securities – A stakeholder approach

The purpose of this study was to analyze how different stakeholders, such as the European Central Bank, the European Commission, the European Central Securities Depositories Association, the Bank of International Settlements and the International Monetary Fund, have influenced the European financial integration in the area of securities clearing and settlement since the introduction of the single currency. The results show that the contribution differs from stakeholder to another and can take the form of standards and recommendations, legislation, research and publications, risk analysis etc. The Eurosystem has been particularly active in this area by proving and planning central bank services, such as TARGET2, CCMB2 and T2S. Along the way the development has and continues to face challenges that need to be solved by European authorities. Coordination is a key factor for the future as we have seen during the recent financial turmoil.

Database of the Amazon aromatic plants and their essential oils

The aromatic flora of the Amazon has been inventoried for 30 years. In this sense, were made over 500 field trips to collect over 2500 plants and to obtain more than 2000 essential oils and aroma concentrates, all of them submitted to GC and GC-MS. This work led to the creation of a database for the aromatic plants of the Amazon, which catalogs general information about 1250 specimens. The database has allowed the publication of the chemical composition of the oils and aromas of more than 350 species, associated with a larger number of chemical types. The essential oils of many species offer optimum conditions for economic exploitation and use in national and international market of fragrances, cosmetics, agricultural and household pesticides.