Conversion of Soybean oil to Biodiesel Fuel with Immobilized Candida Lipase on Textile Cloth

The characteristic of biodiesel fuel production from transesterification of soybean oil is studied. The reactant solution is the mixture of soybean oil, methanol, and solvent. A new lipase immobilization method, textile cloth immobilization, was developed in this study. Immobilized Candida lipase sp. 99-125 was applied as the enzyme catalyst. The effect of flow rate of reaction liquid, solvents, reaction time, and water content on the biodiesel yield is investigated. Products analysis shows that the main components in biodiesel are methyl sterate, methyl hexadecanoate, methyl oleate, methyl linoleate, and methyl linolenate. The test results indicate that the maximum yield of biodiesel of 92% was obtained at the conditions of hexane being the solvent, water content being 20 wt%, and reaction time being 24 h.

Establishment and characterization of dual-species biofilms formed between a 3,5-dinitrobenzoic-degrading strain and bacteria with high biofilm-forming capabilities

In this study, the possibility of establishing a dual-species biofilm from a bacterium with a high biofilm-forming capability and a 3,5-dinitrobenzoic acid (3,5-DNBA)-degrading bacterium, Comamonas testosteroni A3, was investigated. Our results showed that the combinations of strain A3 with each of five strains with a high biofilm-forming capability (Pseudomonas sp. M8, Pseudomonas putida M9, Bacillus cereus M19, Pseudomonas plecoglossicida M21 and Aeromonas hydrophila M22) presented different levels of enhancement regarding biofilm-forming capability. Among these culture combinations, the 24-h dual-species biofilms established by C. testosteroni A3 with P. putida M9 and A. hydrophila M22 showed the strongest resistance to 3,5-DNBA shock loading, as demonstrated by six successive replacements with DMM2 synthetic wastewater. The degradation rates of 3,5-DNBA by these two culture combinations reached 63.3-91.6% and 70.7-89.4%, respectively, within 6 h of every replacement. Using the gfp-tagged strain M22 and confocal laser scanning microscopy, the immobilization of A3 cells in the dual-species biofilm was confirmed. We thus demonstrated that, during wastewater treatment processes, it is possible to immobilize degrader bacteria with bacteria with a high biofilm-forming capability and to enable them to develop into the mixed microbial flora. This may be a simple and economical method that represents a novel strategy for effective bioaugmentation.

Low potential detection of glutamate based on the electrocatalytic oxidation of NADH at thionine/single-walled carbon nanotubes composite modified electrode

A glutamate biosensor based on the electrocatalytic oxidation of reduced nicotinamide adenine dinucleotide (NADH), which was generated by the enzymatic reaction, was developed via employing a single-walled carbon nanotubes/thionine (Th-SWNTs) nanocomposite as a mediator and an enzyme immobilization matrix. The biosensor, which was fabricated by immobilizing glutamate dehydrogenase (GIDH) on the surface of Th-SWNTs, exhibited a rapid response (ca. 5 s), a low detection limit (0.1 mu M), a wide and useful linear range (0.5-400 mu M), high sensitivity (137.3 +/- 15.7) mu A mM(-1) cm(-2), higher biological affinity, as well as good stability and repeatability. In addition, the common interfering species, such as ascorbic acid, uric acid, and 4-acetamidophenol, did not cause any interference due to the use of a low operating potential (190 mV vs. NHE). The biosensor can be used to quantify the concentration of glutamate in the physiological level. The Th-SWNTs system represents a simple and effective approach to the integration of dehydrogenase and electrodes, which can provide analytical access to a large group of enzymes for wide range of bioelectrochemical applications including biosensors and biofuel cells.

猕猴多潜能成体肝前体细胞及猕猴ES 定向分化为胆管上皮细胞的研究

为解决供体器官的不足，以细胞移植为基础的替代疗法已成为治疗不可逆肝 脏疾病新的希望。 肝前体（干）细胞（Hepatic progenitor cellS，HPCs）和 胚胎干细胞（embryoic stem cells, ES）由于其特殊的细胞特性已成为细胞替 代治疗理想的种源细胞。 然而一方面包括人在内的灵长类动物的正常成体肝来 源的HPCs 的分离依然是很困难的；另一方面，ES 细胞来源的肝细胞和胆管细胞 的生成效率依旧很低。因此有必要建立稳定的高效的灵长类动物HPCs 细胞分离 培养体系及ES 细胞的肝细胞或胆管细胞分化体系以满足供体细胞的不足；这种 体系的建立还有利于研究肝细胞生物学如分化机制、自我更新机制等方面的重要 基础问题。 本研究以猕猴为实验模型，研究了正常成体肝来源的猕猴HPCs 分离、纯化 的条件，系统地鉴定了猕猴HPCs 的细胞特性和体内、外分化潜能，并评价了体 内移植效果。 同时以rES 为材料，建立了rES 高效分化为限定性内胚层 （definitive endoderm cells, DE）和胆管上皮细胞的分化体系。主要实验结 果包括：1）： FBS、EGF、HGF 及rat tail collagen (鼠尾胶原)是分离培养正 常成体猕猴来源的肝上皮前体细胞(rhesus monkey liver epithelial progenitor cells, mLEPCs)所必需的，mLEPCs 在此培养体系中至少可以扩增20 代或5 个月以上，并仍然保持原有的细胞特性；mLEPCs 呈现典型的上皮细胞形 态，并表达HPCs 细胞特有的表达模式即同时表达肝细胞和胆管细胞相关基因 （ALB，APOH，CX43，IB4）或蛋白（CK7，CK8，CK18）；在适宜的分化体系下， mLEPCs 可分化为功能性的肝细胞，形成具有胆管上皮细胞的胆管样结构，并能 转分化形成肌肉样细胞、肌样成纤维细胞及少突样细胞；移植入肝损伤的免疫抑 制的小鼠体内后，mLEPCs 能参与受体肝组织的再生，并能分化成ALB 阳性的肝 细胞；体内定位发现mLEPCs 与胆管区的细胞有相似的免疫原性，提示mLEPCs 可能来源于胆管区。2）：rES 在高浓度的acitvin A（100ng/ml）和低浓度的血 清(1%)单层诱导体系下可定向分化得到高比率的限定性内胚层细胞（definitive endoderm cells，DE 细胞）(约80%)； 高比率的DE 细胞的得到还与rES 细胞的接种密度相关；BMP4 和FGF1 可诱导DE 细胞高效向胆管上皮细胞分化（约90%）， 但并不能得到肝细胞；而Notch 信号通路可维持DE 细胞的存活，并决定着DE 细胞向胆管细胞分化，在Notch 信号通路失活的情形下，即使存在BMP4 和FGF1 都不能促使DE 细胞向胆管细胞分化。 本实验首次成功建立了正常猕猴成体肝HPCs 分离培养体系，证实了分离得 到的猕猴肝上皮前体细胞不但具有正常HPCs 的增殖活力和参与受体肝组织的再 生能力，而且还具有三个胚层的分化潜能，这一结果将为以HPCs 为基础的细胞 替代治疗人类肝脏疾病的实现提供了可能，并首次证明了HPCs 也可以像某些少 数成体干细胞一样具有三个胚层得分化潜能。 此外，本研究建立了rES 高效定 向分化为DE 细胞和胆管细胞的分化体系，这一方法的建立将促进灵长类动物的 DE 细胞的发育机制研究，同时也可为高比率的内胚层功能细胞（如胰岛细胞、 肝细胞、肺细胞）的获得提供丰富的种源细胞和平台。

Surface Initiated Polymerization from Substrates of Low Initiator Density and Its Applications in Biosensors

Surface initiated polymerization (SIP) has become an attractive method for tailoring physical and chemical properties of surfaces for a broad range of applications. Most of those application relied on the merit of a high density coating. In this study we explored a long overlooked field of SIP. SIP from substrates of low initiator density. We combined ellipsometry with AFM to investigate the effect of initiatior density and polymerization time on the morphology of polymer coatings. In addition, we carefully adjusted the nanoscale separation of polymer chains to achieve a balance between nonfouling and immobilization capacities. We further tested the performance of those coating on various biosensors, such as quartz crystal microbalance, surface plasmon resonance, and protein microarrays. The optimized matrices enhanced the performance of those biosensors. This report shall encourage researches to explore new frontiers in SIP that go beyond polymer brushes.

中药蜘蛛香的化学成分研究及以羧甲基魔芋葡苷聚糖-壳聚糖为细胞膜的天冬酰胺酶人工细胞研究

本论文由三章组成。第一章介绍了中药蜘蛛香的化学成分的研究成果，第二章为羧甲基魔芋葡苷聚糖-壳聚糖为细胞膜的天冬酰胺酶人工细胞的研究，第三章综述了人工细胞在生物医学领域的应用。 第一章报道了中药蜘蛛香（Valeriana wallichii）根部乙醇提取物的化学成分，采用正、反相硅胶层析等分离方法和MS、NMR等多种波谱手段，从中共分离鉴定出17个化合物，分别为缬草素(valtrate，1)，valechlorine（2），homobadrinal（3），baldrinal（4），乙酰缬草素(acevaltrate 5)，valeriotetrate C（6），valeriotetrate B（7），对羟基苯乙酮(4'-hydroxy-acetophenone 8)，7-hydroxy valtrate（9），8-methylvalepotriate（10），1,5-dihydroxy-3,8-epoxyvalechlorine A（11），二氢缬草素(didrovaltrate 12)，胡萝卜苷（13），橙皮苷 (hesperidin 14)，prinsepiol-4-O-β-D-glucopyranoside（15），longiflorone（16），乙基糖苷（17）。其中化合物6、7、10、和11为新化合物，化合物9、15、16为首次从该植物中得到。新化合物11为含有氯原子的刚性骨架环烯醚萜，并且确定了其绝对构型。 第二章报道了以羧甲基魔芋葡苷聚糖（CKGM）和壳聚糖（CS）为膜的固定化L-天冬酰胺酶人工细胞研究成果。利用羧甲基魔芋葡苷聚糖和壳聚糖两种生物相容性很好的天然多糖之间的静电吸引力，在非常温和的条件下制备成具有半透过性膜的人工细胞，将治疗儿童急性成淋巴细胞性白血病(ALL)的药物L-天冬酰胺酶包裹在内。通过考察温度和pH对人工细胞的影响,结果表明以CKGM- CS为膜的L-天冬酰胺酶人工细胞对温度和pH的稳定性和耐受性均高于自由酶，说明CKGM-CS对酶具有保护作用，而且小分子底物和产物可以自由进出膜内外，而包裹在膜内的生物大分子则不能泄露出来。 第三章综述了微囊化人工细胞的研究进展。 This dissertation consists of three parts. In the first part, the chemical constituents from the root of Valeriana wallichii were reported. In the second part, preparation and characteristics of L-Asparaginase Artificial cell were reported. The third part is a review on progress of microcapsule artificial cell. The first chapter is about the isolation and identification of the chemical constituents from the root of V. wallichii. Seventeen compounds were isolated from the ethanol extract of roots of V. wallichii through repeated column chromatography on normal and reversed phase silica gel. By the spectroscopic and chemical evidence, their structures were elucidated as valtrate (1), valechlorine (2), homobadrinal (3), baldrinal (4), acevaltrate (5), valeriotetrate C (6), valeriotetrate B (7), 4'-hydroxy-acetophenone (8), 7-hydroxy valtrate (9), 8-methylvalepotriate (10), 1,5-dihydroxy-3,8-epoxyvalechlorine A (11), didrovaltrate (12), daucosterol (13), hesperidin (14), prinsepiol-4-O-β-D-glucopyranoside (15), longiflorone (16), and ethyl glucoside (17). Among them, 6, 7, 10, and 11 are new compounds. 15, 16 and 9 were isolated from this plant for the first time. The absolute configuration of compound 11, an unusual iridoid bearing a C-10 chlor-group and an oxo-bridge connecting C-3 and C-8 resulting in a rigid skeleton, was confirmed. The second chapter is about the semi-permeable microcapsule of carboxymethyl konjac glucomannan-chitosan for L-asparaginase immobilization. Carboxymethyl konjac glucomannan-chitosan (CKGM-CS) microcapsules, which have good biocompatibility, prepared under very mild conditions via polyelectrostatic complexation, were used for immobilize L-asparaginase-a kind of drug for acute lymphoblastic leukemia (ALL). The activity and stability under different temperature and pH of the enzyme loaded-microcapsules were studied. The results indicated the immobilized enzyme has better stability and activity contrasting to the native enzyme. The study illustrates that the L-asparaginase could be protected in CKGM-CS microcapsules, the substrate and product could pass through the system freely.

微生物酶法拆分消旋芳香族氨基酸的研究

通过单因子和多因子摇瓶正交试验，确定了米曲霉液态发酵产氨基酰化酶的最佳发酵条件。优化发酵培养基组成（ρ/g L-1）： 葡萄糖40,蔗糖10,可溶性淀粉20,蛋白胨2.5,马铃薯液1 000mL, pH自然。培养基装量50mL/250mL三角瓶，接种量4%。培养温度30℃，转速100 rmin-1，发酵时间42h。每50mL培养物的总酶活由优化前的2627U提高到7338U，是优化前的2.79倍。 研究了米曲霉氨基酰化酶的部分酶学性质，该酶催化反应的最适pH为7.0，最适温度为40℃，低浓度的Co2+（5×10-4mol/L）对酶活激活作用显著，催化反应过程中，底物浓度大于0.2 mol/L时，存在高浓度底物抑制酶活力现象。 初步探索了包埋法固定化米曲霉氨基酰化酶的载体，在实验的五种载体中，以海藻酸钠为载体包埋固定化米曲霉氨基酰化酶酶活保留率高，且操作简单，成本低廉。对包埋法固定化米曲霉氨基酰化酶酶学性质进行了研究，较游离米曲霉氨基酰化酶，最适温度未发生改变，最适pH向碱性范围偏移至8.0，对酸碱和热的稳定性增强，最适底物浓度增大到0.4 mol/L。 根据氨基酰化酶能立体专一水解L-氨基酰化物的特点，利用米曲霉氨基酰化酶对消旋苯丙氨酸进行了拆分。在米曲霉氨基酰化酶选择性的作用于底物N-乙酰-L-苯丙氨酸，得到L-苯丙氨酸后，通过732阳离子树脂和结晶法分别将L-苯丙氨酸和N-乙酰-D-苯丙氨酸分离，N-乙酰-D-苯丙氨酸通过酸水解脱去乙酰基得到D-苯丙氨酸，拆分得到光学纯度为98%的L-苯丙氨酸（收率84.8%）和光学纯度为92.3%的D-苯丙氨酸（收率89.5%）。 separate factors tests and orthogonal experiments,the optimum fermentation conditions of aminoacylase –producing Aspergillus oryzae were determined, as follows（ρ/g L-1）,glucose 40,sucrose 10,soluble starch 20,peptone 2.5，potato juice 1000ml, inoculation volume 4%and fermentation temperature 30℃,rotation speed 100rmin-1.The highest total enzyme activity ,7338μ,was obtained after fermentation for 42 h, increased by 279% compared with the original value of 2627μbefore optimization. We dicussed partial characteristics of aminoacylase. The optimal pH and temperature of aminoacylase were 7.0 and 40℃ respectively. Low- concentration Co2+ (5×10-4mol/L）activated the aminoacylase remarkably while high-concentration substrate lowered the aminoacylase . Five vectors has been used for immobolizing the enzyme and calcium alginate showed to be the best one for it had the slightest influence on the enzyme activity, easy to operate ,and low in price, comparing with other fours. The enzymatic charateristic study showed that its optimum temperature didn’t change, but the optimum pH and substrat concentration were higher after immobilization. The stability of immobolized enzyme to acid, alkaline and heat rised as well. The aminoacylse from Aspergillus oryzae was used to resolute racemic phenylalanine to obtain D-phenylalanine. After catalyzing process, we took two methods to separate D-phenylalanine .In end,L-phenylalanine was obtained with 98% optical purity in 84.8% yield, D-phenylalanine was obtained with 92.3% optical purity in 89.5% yield.

固定化红酵母细胞合成L-苯丙氨酸研究

In this paper, bioconversion of trans-cinnamic acid(t-Ca)to L-phenylalanine (L-phe) has been investigated by using immobilized yeast cells with induced L-phe Ammonia-lyase(PAL, EC.4.3.1.5) as biocatalysts. The contents are the following. (1) Thirty strains of yeasts, including two genera (Rhodotorula, Sporobolomyces), six species (R. glutinis R. minuta,R.rubra,R.sineses,R.roseus and S.salmonicolor)were screened for their ability to converse the substrates, t-Ca and ammonia, to the product, L-phe, by using yeast cells as biocatalyst, and primary evaluation for PAL activity of the selected strains was investigated. From the results of the screening experiments, it was found that 22 strains were able to produce L-phe from t-Ca with the range of conversion yield from 2% to 67%. Studies on PAL formation time course during cultivation show that the maximum PAL activity of several different strains ranges from 2.3 to 14.4×10-3U/mg cell dry weight. The biomass of tested strains at their maximum enzyme activity is also greatly varied. (2)One of the selected strains, R. rubra as 2.166, was used for immobilized cells as biocatalysts to produce L-phe. The optimum conversion conditions and effective stablization agents were investigated. The results shown that polyacrylamide gel was chosen as a suitable matrix for immobilization of the yeast cells, and it can retain 88% of the PAL activity in the reverse direction at the following reactive conditions: [t-Ca]: 34mM. [NH4OH]: 6.OM.PH10.00, temperature: 30℃. (3) The effects of various kinds of effectors on the production of L-phe were also examined. Membrane permeabilizing agents can stimulate L-phe synthesis, but make the stability of PAL decline greatly. Polyalchoholic agents and glutamic acid were very effective for the stabilization of PAL. At the presence of glutamic acid (5%), the half life of L-phe productivity with the immobilized cells was extended to 192 hours, which was much higher than most of that having been reproted, while the half life of resting cells was only about 15 hours. (4) Use of initial velocity studies on the kinetics of enzyme-catalized reaction indicated that the apparent Km value was 13.0mM for the immobilized cells, and 4.8mM for the resting cells. Thermostability of the immobilized cells was better than the resting cells. Fluid bed bioreactor is more effective than batch bioreator in prolonging the thermostability of the biocatalysts. (5) CGA- 688 resin column chromatographic procedure was employed in the isolation and purification of L-phe, t-Ca and other substances from the reactire mixture. (6) Preparative-scale production of L-phe on a level of gram amount by immobilized cells from the culture broth of R. rubra AS2.166 allowed for the conversion yield with 30%. The characteristic physico-chemical criteria (including melting point, optical activity, elements analysis, IR, NMR) are the same with the standard L-phe. 本文报告了利用诱导的苯丙氨酸解氨酶 (PAL.EC.4.3.1.5)催化反式肉桂酸(t-Ca)氨加 成制备L-苯丙氨酸(L-phe)的研究，主要内容为：(1) 我们搜集了三十株酵母菌株，利用全细胞转化t-Ca生成L-phe的能力进行了直 接筛选，并对其PAL活性水平进行了初步评估研究。研究结果表明，其中22株酵母具有转化t-Ca生产L-phe的能力，它们包括 Rhodotorula glutinis,R.rubra, R.sineses 和Sporobolomyces roseus 的菌株，转化率在2-67%。细胞生长和PAL形成过程的研究 表明，不同菌株PAL最大活力在2.3-14.4×10-3U/mg 细胞干重，达到最大PAL活性时各株酵母的生长情况也极不一致。(2) 利用筛 选出的一株深红酵母R.rubra AS2.166 作为供试菌株，研究了细胞固定化条件下生物转化的最适条件及PAL在固定化条件下的稳定 性。结果表明以聚丙烯酰胺凝胶包埋法较为理想，能使细胞合成L-phe活力保持88%，最适t-Ca浓度为34mM，最适NH4OH浓度为6M,最 适PH10.0，最适温度45℃。(3) 多种效应物对L-phe 合成的影响研究表明：表面活性剂能刺激L-phe的合成，但使PAL稳定性下降。 多羟基化合物及Glu对PAL的稳定十分有效在有Glu存在下，能使固定化细胞合成L-phe的半寿期达192小时左右，高于大部分现已报 导的固定化结果。(4) 用初速度法研究了深红酵母AS2.166中PAL的酶促反应特征，测得固定化细胞对t-Ca的表观米氏常数Km为 13.0mM，全细胞为4.8mM，细胞固定后热稳定性提高。(5) 建立了适合低浓度分离纯化产物与底物的聚苯乙烯大孔树脂柱层析技术 ，能使L-phe与t-Ca及产物混合物中其它成分有效分开。(6) 利用固定化的R.rubra AS2.166细胞所做的制备实验能够使L-phe的产 率达到30%左右，其主要的理化指标(包括熔点、比旋光度、元素分析、IR、NMR等)与标准L-phe一致。

Effects of Ionizing Radiation on Three-Dimensional Human Vessel Models: Differential Effects According to Radiation Quality and Cellular Development

Little is known about the effects of space radiation on the human body. There are a number of potential chronic and acute effects, and one major target for noncarcinogenic effects is the human vasculature. Cellular stress, inflammatory response, and other radiation effects on endothelial cells may affect vascular function. This study was aimed at understanding the effects of space ionizing radiation on the formation and maintenance of capillary-like blood vessels. We used a 3D human vessel model created with human endothelial cells in a gel matrix to assess the effects of low-LET protons and high-LET iron ions. Iron ions were more damaging and caused significant reduction in the length of intact vessels in both developing and mature vessels at a dose of 80 cGy. Protons had no effect on mature vessels up to a dose of 3.2 Gy but did inhibit vessel formation at 80 cGy. Comparison with gamma radiation showed that photons had even less effect, although, as with protons, developing vessels were more sensitive. Apoptosis assays showed that inhibition of vessel development or deterioration of mature vessels was not due to cell death by apoptosis even in the case of iron ions. These are the first data to show the effects of radiation with varying linear energy transfer on a human vessel model. (C) 2011 In Radiation Research Society

Integrated lectin affinity microfluidic chip for glycoform separation

Lectin affinity chromatography was miniaturized into a microfluidic format, which results in improvement of performance, as compared to the conventional method. A lectin affinity monolith column was prepared in the microchannel of a microfluidic chip. The porous monolith was fabricated by UV-initiated polymerization of ethylene dimethacrylate (EDMA) and glycidyl methacrylate (GMA) in the presence of porogeneities, followed by immobilization of pisum sativum agglutinin (PSA) on the monolith matrix. Using electroosmosis as the driven force, lectin affinity chromatographies of three kinds of glycoprotein, turkey ovalbumin (TO), chicken ovalbumin (CO), and ovomucoid (OM), were carried out on the microfluidic system. All the glycoproteins were successfully separated into several fractions with different affinities toward the immobilized PSA. The integrated system reduces the time required for the lectin affinity chromatography reaction to similar to3%, thus, the overall analysis time from 4 h to 400 s. Only 300 pg of glycoprotein is required for the whole separation process. Moreover, troublesome operations for lectin affinity chromatography are simplified.

Synthesis of chiral stationary phases with radical polymerization reaction of cellulose phenylcarbamate derivatives and vinylized silica gel

Cellulose phenylcarbamate derivatives having methacrylate groups were synthesized with regioselective and non-regioselective procedures. These derivatives were chemically immobilized onto a vinylized silica gel, respectively, via a radical co-polymerization reaction. The immobilization was efficiently attained using a small amount of AIBN. The chiral recognition abilities of the prepared chiral stationary phases (CSPs) were evaluated by HPLC resolution of test enantiomers. It was observed that most of the enantiomers were completely resolved with markedly high column efficiency of 30,000-40,000 plates per metre for the eluted peaks. The effect of the amount of methacrylolyl chloride used for preparation on resolution was investigated. A direct comparison of the chiral recognition ability was made on the regioselectively and non-regioselectively prepared CSPs. In addition, the chemically bonded-type of CSPs were found to be relatively stable with addition of solvents such as tetrahydrofuran (THF) and chloroform into the mobile phase, which can lead to the dissolution of cellulose derivatives on the coated CSPs. Thus the choice of solvents used as the mobile phase is greatly extended and better resolution of several test enantiomers was observed on the prepared CSPs with THF and chloroform as a composition in the mobile phase. The batch-to-batch and run-to-run reproducibility was also discussed on the newly prepared CSPs. (C) 2004 Elsevier B.V. All rights reserved.

Chiral synthesis on catalysts immobilized in microporous and mesoporous materials

This paper reviews the recent progress made in the asymmetric synthesis on chiral catalysts in porous materials and discusses the effects of surface and pores on enantio-selectivity (confinement effect). This paper also summarizes various approaches of immobilization of the chiral catalysts onto surfaces and into pores of solid inorganic supports such as microporous and mesoporous materials. The most important reactions surveyed for the chiral synthesis in porous materials include epoxidation. hydrogenation, hydroformylation, Aldol and Diels-Alder reactions, etc. The confinement effect originated from the surfaces and the pores turns out to be a general phenomenon. which may make the enantioselectivity increase (positive effect) or decrease (negative effect). The confinement effect becomes more pronounced particularly when the bonding between the catalyst and the surface is more rigid and the pore size is tuned to a suitable range. It is proposed that the confinement in chiral synthesis is essentially a consequence of subtle change in transition states induced by weak-interaction in pores or on surfaces. It is also anticipated that the enantioselectivity could be improved by tuning the confinement effect based on the molecular designing of the pore/surface and the immobilized catalysts according to the requirements of chiral reactions.

固定化微生物降解土壤中菲和芘的研究

Immobilized with PVA,sodium alginate and activated carbon,both Zoogloea sp. and Fusarium sp.strains could degrade phenanthrene and pyrene efficiently.The optimal carrier was made of 100ρ·g -1 L PVA,5 sodium alginateρ·g -1 L and 50 activated carbon ρ·g -1 L.The degradation rates of phenanthrene and pyrene in 10 days were 87.48% and 75.34% by the immobilized bacterium,37.04% and 20.85% higher than those by the free bacterium,and the rates in 15 days were 84.36% and 74.87% by the immobilized fungus,5.35% and 11.23% higher than those by the free fungus.

Immobilized metal-ion chelating capillary microreactor for peptide mapping analysis of proteins by matrix assisted laser desorption/ionization-time of flight-mass spectrometry

Peptide mass mapping analysis, utilizing a regenerable enzyme microreactor with metal-ion chelated adsorption of enzyme, combined with matrix assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS) was developed. Different procedures from the conventional approaches were adopted to immobilize the chelator onto the silica supports, that is, the metal chelating agent of iminodiacetic acid (IDA) was reacted with glycidoxypropyltrimethoxysilane (GLYMO) before its immobilization onto the inner wall of the fused-silica capillary pretreated with NH4HF2. The metal ion of copper and subsequently enzyme was specifically adsorbed onto the surface to form the immobilized enzyme capillary microreactor, which was combined with MALDI-TOF-MS to apply for the mass mapping analysis of nL amounts of protein samples. The results revealed that the peptide mapping could routinely be generated from 0.5 pmol protein sample in 15 min at 50degreesC, even 20 fmol cytochrome c could be well digested and detected.

Flow-through room temperature phosphorescence optosensing for the determination of lead in sea water

The chelates formed between the heavy metal ion Pb(II) and the reagents 8-hydroxy-5-quinolinesulphonic acid, 8-hydroxy-7-quinolinesulphonic acid and 8-hydroxy-7-iodo-5-quinolinesulphonic acid exhibit strong room temperature phosphorescence (RTP) if retained on the surface of anion exchange resin beads. Based on the on-line formation, in a flow-injection system, of such RTP lead chelates and their transient immobilization on an anion exchange resin, three flow-through optosensing systems are investigated for lead in sea water. Optimum experimental conditions and the analytical performance characteristics of the three optosensors are discussed. Relative standard deviations (RSDs) of the order of 3% are typical at 100 ng ml−1 Pb(II) and the active sensing phases can easily be regenerated by passing 500 μl of 6 M hydrochloric acid. A lead(II) detection limit of 0.1 ng ml−1 (3×background SD, for 2 ml sample injection volumes) was achieved for the optosensor based on 8-hydroxy-7-quinolinesulphonic acid. Possible interferences present in sea water, including cations and anions which could affect the sensor response, are discussed in detail. Finally, the selected RTP flow-through optical sensor has been successfully tested for the determination of lead in sea water at a few ng ml−1.