Understanding aerospace composite components' supply chain carbon emissions

This paper examines a large structural component and its supply chain. The component is representative of that used in the production of civil transport aircraft and is manufactured from carbon fibre epoxy resin prepreg, using traditional hand layup and autoclave cure. Life cycle assessment (LCA) is used to predict the component’s production carbon emissions. The results determine the distribution of carbon emissions within the supply chain, identifying the dominant production processes as carbon fibre manufacture and composite part manufacture. The elevated temperature processes of material and part creation, and the associated electricity usage, have a significant impact on the overall production emissions footprint. The paper also demonstrates the calculation of emissions footprint sensitivity to the geographic location and associated energy sources of the supply chain. The results verify that the proposed methodology is capable of quantitatively linking component and supply chain specifics to manufacturing processes and thus identifying the design drivers for carbon emissions in the manufacturing life of the component.

SN2014J gamma rays from the 56Ni decay chain

Context. The detection and measurement of gamma-ray lines from the decaychain of 56Ni provides unique information about the explosionin supernovae. SN2014J at 3.3 Mpc is a sufficiently-nearby supernova oftype Ia so that such measurements have been feasible with the gamma-rayspectrometer SPI on ESA's INTEGRAL gamma-ray observatory.

Aims:The 56Ni freshly produced in the supernova is understood topower the optical light curve, because it emits gamma rays upon itsradioactive decay first to 56Co and then to 56Fe.Gamma-ray lines from 56Co decay are expected to becomedirectly visible through the white dwarf material several weeks afterthe explosion, as they progressively penetrate the overlying material ofthe supernova envelope, which is diluted as it expands. The lines areexpected to be Doppler-shifted or broadened from the kinematics of the56Ni ejecta. We aim to exploit high-resolution gamma-rayspectroscopy with the SPI spectrometer on INTEGRAL toward constrainingthe 56Ni distribution and kinematics in this supernova.

Methods: We use the observations with the SPI spectrometer onINTEGRAL, together with an improved instrumental background method.

Results: We detect the two main lines from 56Co decay at847 and 1238 keV, which are significantly Doppler-broadened, and atintensities (3.65 ± 1.21) × 10-4 and (2.27± 0.69) × 10-4 ph cm-2s-1, respectively, at their brightness maximum. We measuretheir rise toward a maximum after about 60-100 days and a declinethereafter. The intensity ratio of the two lines is found to beconsistent with expectations from 56Co decay (0.62 ±0.28 at brightness maximum, the expected ratio is 0.68). We find thatthe broad lines seen in the late, gamma-ray transparent phase are notrepresentative of the early gamma-ray emission, and notice instead thatthe emission spectrum is complex and irregular until the supernova isfully transparent to gamma rays, with progressive uncovering of the bulkof 56Ni. We infer that the explosion morphology is notspherically symmetric, both in the distribution of 56Ni andin the unburnt material which occults the 56Co emission.After we compare light curves from different plausible models, theresulting 56Ni mass is determined to be 0.49 ± 0.09M⊙.

Extraordinary mechanical properties of monatomic C3N2 chain

One-dimensional monatomic chains are promising candidates for technical applications in the field of nanoelectronics due to their unique mechanical, electrical and optical properties. In particular, we investigate the mechanical properties including Young's modulus, ultimate strength and ultimate strain, which are necessities for the stability of the materials by the Car-Parrinello molecular dynamics in this work. The comparative studies for the alternating carbon-nitrogen (C<sub>3sub>N<sub>2sub>) chain and carbon chains (carbyne) of different lengths show that the carbon-nitrogen (C-N) chain is obviously stronger and stiffer than carbynes. Thus the C-N chain, which has been found in decomposition products of the nitromethane explosive simulations, could be a superior nano-mechanical material than the carbyne chain. Furthermore, it is found that the bond order of weakest bond in monatomic chains is positively correlated with Young's modulus and ultimate strength of materials.

Fish product mislabelling: failings of traceability in the production chain and implications for illegal, unreported and unregulated (IUU) fishing

Increasing consumer demand for seafood, combined with concern over the health of our oceans, has led to many initiatives aimed at tackling destructive fishing practices and promoting the sustainability of fisheries. An important global threat to sustainable fisheries is Illegal, Unreported and Unregulated (IUU) fishing, and there is now an increased emphasis on the use of trade measures to prevent IUU-sourced fish and fish products from entering the international market. Initiatives encompass new legislation in the European Union requiring the inclusion of species names on catch labels throughout the distribution chain. Such certification measures do not, however, guarantee accuracy of species designation. Using two DNA-based methods to compare species descriptions with molecular ID, we examined 386 samples of white fish, or products labelled as primarily containing white fish, from major UK supermarket chains. Species specific real-time PCR probes were used for cod (Gadus morhua) and haddock (Melanogrammus aeglefinus) to provide a highly sensitive and species-specific test for the major species of white fish sold in the UK. Additionally, fish-specific primers were used to sequence the forensically validated barcoding gene, mitochondrial cytochrome oxidase I (COI). Overall levels of congruence between product label and genetic species identification were high, with 94.34% of samples correctly labelled, though a significant proportion in terms of potential volume, were mislabelled. Substitution was usually for a cheaper alternative and, in one case, extended to a tropical species. To our knowledge, this is the first published study encompassing a large-scale assessment of UK retailers, and if representative, indicates a potentially significant incidence of incorrect product designation.

Abundance and diversity of sedimentary bacterial communities in a coastal productive setting in the Western Irish Sea

The bacterial community composition and biomass abundance from a depositional mud belt in the western Irish Sea and regional sands were investigated by phospholipid ester-linked fatty acid profiling, denaturing gradient gel electrophoresis and barcoded pyrosequencing of 16S rRNA genes. The study area varied by water depth (12-111 m), organic carbon content (0.09-1.57% TOC), grain size, hydrographic regime (well-mixed vs. stratified), and water column phytodetrital input (represented by algal polyunsaturated PLFA). The relative abundance of bacterial-derived PLFA (sum of methyl-branched, cyclopropyl and odd-carbon number PLFA) was positively correlated with fine-grained sediment, and was highest in the depositional mud belt. A strong association between bacterial biomass and eukaryote primary production was suggested based on observed positive correlations with total nitrogen and algal polyunsaturated fatty acids. In addition, 16S rRNA genes affiliated to the classes Clostridia and Flavobacteria represented a major proportion of total 16S rRNA gene sequences. This suggests that benthic bacterial communities are also important degraders of phytodetrital organic matter and closely coupled to water column productivity in the western Irish Sea.

Productive Knowledge of English Binomials by Japanese Learners of English

The purpose of this research is to reveal (1) which English binomials Japanese learners of English have productive knowledge of and (2) what strategies they use to produce English binomials when they do not know the binomials. One hundred and three Japanese learners of English with intermediate proficiency level completed an online survey of 44 binomials. The participants were given the first word of a binomial and asked to type a word following “and”. The target word was provided by more than 75% of participants for 19 of the 44 binomials, meaning that learners have productive knowledge for certain binomials. An analysis of errors suggested that the participants relied heavily on semantic relationships between items in binomials.However, the use of a semantic strategy for producing the second words often leads to non-binomial expressions. From these results we suggest that giving more input to learners, as well as teaching the “Me first” principle (Cooper & Ross, 1975) explicitly would help the learners to develop more accurate and effective strategies for uncertain or unfamiliar binomials.

An Ultrasonic Relaxation Study of 1-Alkyl-3-Methylmidazolium-Based Room Temperature Ionic Liquids: Probing the Role of Alkyl Chain Length in the Cation

Ultrasound absorption spectra of four 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide were determined as a function of the alkyl chain length on the cation from 1-propyl- to 1-hexyl- from 293.15 to 323.15 K at ambient pressure. Herein, the ultrasound absorption measurements were carried out using a standard pulse technique within a frequency range from 10 to 300 MHz. Additionally the speed of sound, density and viscosity have been measured. The presence of strong dissipative processes during the ultrasound wave propagation was found experimentally, i.e. relaxation processes in the megahertz range were observed for all compounds over the whole temperature range. The relaxation spectra (both relaxation amplitude and relaxation frequency) were shown to be dependent on the alkyl side chain length of the 1-alkyl-3-methylimidazolium ring. In most cases, a single Debye model described the absorption spectra very well. However, a comparison of the determined spectra with the spectra of a few other imidazolium-based ionic liquids reported in the literature (in part recalculated in this work) shows that the complexity of the spectra increases rapidly with the elongation of the alkyl chain length on the cation. This complexity indicates that both the volume viscosity and the shear viscosity are involved in relaxation processes even in relatively low frequency ranges. As a consequence, the sound velocity dispersion is present at relatively low megahertz frequencies.

A class of efficient short-chain fluorinated catanionic surfactants

There have been many attempts to find suitable replacements for fluorinated surfactants due to problems related to their bioaccumulation and resistance to biodegradation. Meeting the exceptional performances of these compounds, however, remains largely an unaccomplished challenge. Currently, a solution might be found through the synthesis of new classes of fluorinated compounds that possess reduced environmental impact by following the recommended strategies for their greener and safer design. In this article we report a novel approach by designing a family of catanionic fluorinated surfactants that shows potential for improved degradation, good water solubility, and low Krafft points. Furthermore, these surfactants exhibit excellent fluorine efficiency and effectiveness of surface tension reduction.

Progressing from internal to supply chain level environmental strategies: The influence of internal support processes

The need for companies to consider the environmental impact of their operations and supply chains has been highlighted in the literature. However, few studies appear to consider how companies’ progress from proactive environmental strategies implemented at the internal, operations level to proactive environmental strategies implemented at the supply chain level. This study assesses the implementation process through the lens of the natural resource-based view and dynamic capabilities perspective. First, the link between the internal strategy ‘pollution prevention’ and the supply chain strategy ‘process stewardship’ is assessed. Second, the mediating influence of the internal support processes ‘integration’ and ‘learning’ on the implementation process is considered. Data collected from a sample of 1200 UK-based food manufacturing companies is analysed using multiple regression analysis. The findings suggest that the progression to environmental efforts at the supply chain level begins with internally-based environmental efforts and that the integration of these efforts and experience gained from them are important supporting factors in this progression.

POPULATION DYNAMICS OF PLANT PARASITIC NEMATODES AND THEIR RELATIONSHIPS WITH SOIL PHYSICO-CHEMICAL PARAMETERS DURING THE FALLOW PERIOD AFTER SUGARBEET AND LEADING INTO TOMATO CULTIVATION

The main objective of this research was the study of the soil nematode community, and in particular plant parasitic nematodes (PPN), from a field located in Portugal’s southern region, used for sugarbeet production. The study was performed from February to July 2003, covering part of the fallow period previous to tomato cultivation, the alternative crop in the rotation. The end of the fallow period in March and the soil preparation period in May were marked by a significant reduction in the numbers of PPN, whereas their numbers increased on the following tomato crop. The genus Helicotylenchus stood out as the most representative group, forming 90% of all PPN counted each month. The genus Heterodera was relatively abundant in the months following the previous sugarbeet crop, and numbers of the genus Meloidogyne increased during the tomato crop. The correlations between these group and environmental parameters show that, apart from the direct influence of the host, pH, organic matter, temperature and soil moisture significantly influenced nematode abundance and community composition.

Essays on supply chain's flexibility: a real options approach

A presente tese investiga o processo de tomada de decisão na gestão de cadeias de abastecimento, utilizando um quadro de análise de opções reais. Especificamente, estudamos tópicos como o nível de inventário ideal para protecção contra a incerteza da procura, o momento para implementação de capacidade flexível em mercados onde existe complexidade no mix de produtos, o tempo para o reforço do factor trabalho visando requisitos de serviço ao mercado, e as decisões entre integração e outsourcing num ambiente de incerteza. Foram usadas metodologias de tempo discreto e contínuo para identificar o valor ideal e o calendário das opções a adoptar, quando a procura é estocástica. Além disso, foram considerados os efeitos dos requisitos dos mercados, como a complexidade na oferta de produtos e o nível de serviço. A procura é representada recorrendo a diferentes processos estocásticos, o impacto de saltos inesperados também é explorado, reforçando a generalização dos modelos a diferentes condições de negócio. A aplicabilidade dos modelos que apresentamos permite a diversificação e o enriquecimento da literatura sobre a abordagem de opções reais, no âmbito das cadeias de abastecimento. Níveis de inventário flexíveis e capacidades flexíveis são característicos das cadeias de abastecimento e podem ser usados como resposta à incerteza do mercado. Esta tese é constituída por ensaios que suportam a aplicação dos modelos, e consiste num capítulo introdutório (designado por ensaio I) e mais seis ensaios sobre factores que discutem o uso de medidas de flexibilidade nas cadeias de abastecimento, em ambientes de incerteza, e um último ensaio sobre a extensão do conceito de flexibilidade ao tratamento da avaliação de planos de negócio. O segundo ensaio que apresentamos é sobre o valor do inventário num único estádio, enquanto medida de flexibilidade, sujeita ao crescente condicionalismo dos custos com posse de activos. Introduzimos uma nova classificação de artigos para suportar o indicador designado por overstock. No terceiro e quarto ensaio ampliamos a exploração do conceito de overstock, promovendo a interacção e o balanceamento entre vários estádios de uma cadeia de abastecimento, como forma de melhorar o desempenho global. Para sustentar a aplicação prática das abordagens, adaptamos o ensaio número três à gestão do desempenho, para suportar o estabelecimento de metas coordenadas e alinhadas; e adaptamos o quarto ensaio à coordenação das cadeias de abastecimento, como auxiliar ao planeamento integrado e sequencial dos níveis de inventário. No ensaio cinco analisamos o factor de produção “tecnologia”, em relação directa com a oferta de produtos de uma empresa, explorando o conceito de investimento, como medida de flexibilidade nas componentes de volume da procura e gama de produtos. Dedicamos o ensaio número seis à análise do factor de produção “Mão-de-Obra”, explorando as condicionantes para aumento do número de turnos na perspectiva económica e determinando o ponto crítico para a tomada de decisão em ambientes de incerteza. No ensaio número sete exploramos o conceito de internalização de operações, demarcando a nossa análise das demais pela definição do momento crítico que suporta a tomada de decisão em ambientes dinâmicos. Complementamos a análise com a introdução de factores temporais de perturbação, nomeadamente, o estádio de preparação necessário e anterior a uma eventual alteração de estratégia. Finalmente, no último ensaio, estendemos a análise da flexibilidade em ambientes de incerteza ao conceito de planos de negócio. Em concreto, exploramos a influência do número de pontos de decisão na flexibilidade de um plano, como resposta à crescente incerteza dos mercados. A título de exemplo, usamos o mecanismo de gestão sequencial do orçamento para suportar o nosso modelo. A crescente incerteza da procura obrigou a um aumento da agilidade e da flexibilidade das cadeias de abastecimento, limitando o uso de muitas das técnicas tradicionais de suporte à gestão, pela incapacidade de incorporarem os efeitos da incerteza. A flexibilidade é claramente uma vantagem competitiva das empresas que deve, por isso, ser quantificada. Com os modelos apresentados e com base nos resultados analisados, pretendemos demonstrar a utilidade da consideração da incerteza nos instrumentos de gestão, usando exemplos numéricos para suportar a aplicação dos modelos, o que claramente promove a aproximação dos desenvolvimentos aqui apresentados às práticas de negócio.

Silver nanoparticles flow in an aquatic trophic chain

Silver nanoparticles (AgNP) have been produced and applied in a variety of products ranging from personal care products to food package containers, clothing and medicine utilities. The antimicrobial function of AgNP makes it very useful to be applied for such purposes. Silver (Ag) is a non-essential metal for organisms, and it has been historically present in the environment at low concentrations. Those concentrations of silver increased in the last century due to the use of Ag in the photographic industry and lately are expected to increase due to the use of AgNPs in consumer products. The presence of AgNP in the aquatic environment may pose a risk for aquatic species, and the effects can vary from lethal to sublethal effects. Moreover, the contact of aquatic organisms with AgNP may not cause immediately the death of individuals but it can be accumulated inside the animals and consequently transferred within the food chain. Considering this, the objective of this work was to study the transfer of silver nanoparticles in comparison to silver ions, which was used as silver nitrate, within an aquatic food chain model. To achieve this goal, this study was divided into four steps: the toxicity assessment of AgNP and AgNO3 to aquatic test-species, the bioaccumulation assessment of AgNP and AgNO3 by Pseudokirchneriella subcapitata and Daphnia magna under different exposure scenarios, and finally the evaluation of the trophic transfer of Ag through an experimental design that included the goldfish Carassius auratus in a model trophic chain in which all the species were exposed to the worse-case scenario. We observed that the bioconcentration of Ag by P. subcapitata is mainly driven by ionic silver, and that algae cannot internalize these AgNPs, but it does internalizes dissolved Ag. Daphnia magna was exposed to AgNP and AgNO3 through different exposure routes: water, food and both water and food. The worse-case scenario for Daphnia Ag bioaccumulation was by the joint exposure of contaminated water and food, showing that Ag body burdens were higher for AgNPs than for AgNO3. Finally, by exposing C. auratus for 10 days through contaminated water and food (supplied as D. magna), with another 7 days of depuration phase, it was concluded that the 10 days of exposure were not enough for fish to reach a plateau on Ag internal concentration, and neither the 7 days of elimination were sufficient to cause total depuration of the accumulated Ag. Moreover, a higher concentration of Ag was found in the intestine of fish when compared with other organs, and the elimination rate constant of AgNP in the intestine was very low. Although a potential for trophic transfer of AgNP cannot be suggested based in the data acquired in this study, there is still a potential environmental risk for aquatic species.