Biocompósitos poliméricos obtidos a partir da fração lignocelulósica e amilácea do caroço de manga (mangifera indica), Tommy atkins

This employment has the function the utilization of mango seeds Tommy Atkins, like starch source to obtain biopolymers and fibers source and nanowhiskers cellulose also, that will be use like reinforcing fillers in micro and nanobiocomposites polymeric. The fibers in natura removed from tegument mango seed were characterized, as weel as the treated fibers and nanowhiskers of cellulose extracted from them. The starch extracted from seed s almond showed a good performance (32%) and a high purity. The chemicals analyzes, of crystallinity and morphological of the fibers in natura, treated fibers and nanowhiskers of cellulose confirmed the efficacy of the chemical treatement performed to remove amorphous constituents (hemicellulose and lignina). The thermoplastic starch (TPS) obtained from two sources, corn starch and starchy material mango, was produced in a twin screw extruder with compositon mass of 62,5% of starch, 9,4% of water and 28,1% of glycerol. The starch material mango was the main objective of this work for the production of biodegradable materials, and the starch corn was utilized during the production stage to evaluate the processability of the starch and use as parameter for comparison, according of being a conventional source for obtaining conventional comercial starch. The incorporation of fibers (6% in mass) and nanowhiskers cellulose (1% in mass) in matrix of TPS to obtain composite and nanocomposite, respectively, it was performed in single screw extruder. The biocomposites and bionanocomposites polymeric were obtained and the TPS from starchy material mango presented better results of thermal and mechanicals properties when compared to TPS corn starch. Concludes that the sediment generated of the agroindustrial processing mango used presents potencial to producing of biodegradables materials

Reconfiguração dinâmica de estratégias distribuídas em dispositivos foundation fieldbus para a otimização de processos na indústria do petróleo

The petrochemical industry has as objective obtain, from crude oil, some products with a higher commercial value and a bigger industrial utility for energy purposes. These industrial processes are complex, commonly operating with large production volume and in restricted operation conditions. The operation control in optimized and stable conditions is important to keep obtained products quality and the industrial plant safety. Currently, industrial network has been attained evidence when there is a need to make the process control in a distributed way. The Foundation Fieldbus protocol for industrial network, for its interoperability feature and its user interface organized in simple configuration blocks, has great notoriety among industrial automation network group. This present work puts together some benefits brought by industrial network technology to petrochemical industrial processes inherent complexity. For this, a dynamic reconfiguration system for intelligent strategies (artificial neural networks, for example) based on the protocol user application layer is proposed which might allow different applications use in a particular process, without operators intervention and with necessary guarantees for the proper plant functioning

Desenvolvimento de sistemas de aditivos químicos para aplicação em cimentações de poços de petróleo

The primary cementing is an important step in the oilwell drilling process, ensuring the mechanical stability of the well and the hydraulic isolation between casing and formation. For slurries to meet the requirements for application in a certain well, some care in the project should be taken into account to obtain a cement paste with the proper composition. In most cases, it is necessary to add chemicals to the cement to modify its properties, according to the operation conditions and thus obtain slurries that can move inside the jacket providing a good displacement to the interest area. New technologies of preparation and use of chemicals and modernization of technological standards in the construction industry have resulted in the development of new chemical additives for optimizing the properties of building materials. Products such as polycarboxylate superplasticizers provide improved fluidity and cohesion of the cement grains, in addition to improving the dispersion with respect to slurries without additives. This study aimed at adapting chemical additives used in civil construction to be used use in oilwell cement slurries systems, using Portland cement CPP-Special Class as the hydraulic binder. The chemical additives classified as defoamer, dispersant, fluid loss controller and retarder were characterized by infrared absorption spectroscopy, thermogravimetric analyses and technological tests set by the API (American Petroleum Institute). These additives showed satisfactory results for its application in cement slurries systems for oil wells. The silicone-based defoamer promoted the reduction of air bubbles incorporated during the stirring of the slurries. The dispersant significantly reduced the rheological parameters of the systems studied. The tests performed with the fluid loss controller and the retarder also resulted in suitable properties for application as chemical additives in cement slurries

Estudo do comportamento de pastas compósitas cimento/sílica/poliuretana para poços de petróleo HPHT

Os poços HPHT atravessam zonas anormalmente pressurizadas e com altos gradientes de temperatura. Esses poços apresentam elevadas concentrações de tensões produzidas pelas operações de perfuração e fraturamento hidráulico, flutuações da pressão e temperatura, forças dinâmicas geradas durante a perfuração, formações inconsolidadas, entre outros aspectos, podendo resultar em falhas mecânicas na bainha de cimento. Tais falhas comprometem a estabilidade mecânica do poço e o isolamento das zonas produtoras de óleos e/ou gás. Para que operações corretivas não se façam necessárias, é preciso adequar as pastas às condições de cada poço. Sistemas de pastas de cimento para poços HPHT requerem um bom controle de suas propriedades termo-mecânicas. Visto que a temperaturas superiores a 110 oC (230 oF) o cimento, após alcançar um valor máximo de resistência, inicia um processo de perda de resistência (retrogressão). Para prevenir esse efeito substitui-se parcialmente o cimento Portland por sílica com objetivo de incrementar a reação pozolânica. Esta reação modifica a trajetória do processo natural de hidratação do cimento, o gel de silicato de cálcio hidratado (C-S-H) se converte em várias outras fases com maior resistência. Polímeros também são adicionados para proporcionar maior flexibilidade e agir como barreira à propagação de trincas desenvolvidas sob tensão. O presente trabalho teve como objetivo estudar o comportamento do sistema cimento/sílica/polímero quando submetido às condições de alta temperatura e alta pressão. Foram formuladas pastas de cimento puro, pastas contendo 40 % BWOC de sílica flour e pastas com diferentes concentrações de poliuretana (5 % a 25 %) e 40 % BWOC de sílica flour. O peso específico das pastas foi fixado em 1,87 g/cm3 (15,6 lb/gal). Os resultados demonstram que as resistências da pasta contendo 40% de sílica e das com adição de polímero foram muito superiores a da pasta de cimento puro, não ocorrendo o efeito da retrogressão. As pastas com polímero apresentaram um crescente aumento da tenacidade com o aumento da concentração da mesma, sendo assim capaz de suportar as tensões. Além de se manterem estáveis termicamente acima de 180 ºC. O sistema também apresentou excelentes resultados de filtrado, reologia, água livre, estabilidade e permeabilidade. Sendo assim, o mesmo mostrou ser aplicável a poços HPHT

Modelagem e previsão da perda de injetividade em poços canhoneados

Waterflooding is a technique largely applied in the oil industry. The injected water displaces oil to the producer wells and avoid reservoir pressure decline. However, suspended particles in the injected water may cause plugging of pore throats causing formation damage (permeability reduction) and injectivity decline during waterflooding. When injectivity decline occurs it is necessary to increase the injection pressure in order to maintain water flow injection. Therefore, a reliable prediction of injectivity decline is essential in waterflooding projects. In this dissertation, a simulator based on the traditional porous medium filtration model (including deep bed filtration and external filter cake formation) was developed and applied to predict injectivity decline in perforated wells (this prediction was made from history data). Experimental modeling and injectivity decline in open-hole wells is also discussed. The injectivity of modeling showed good agreement with field data, which can be used to support plan stimulation injection wells

Ambiente para avaliação de controladores fuzzy aplicados ao método de elevação artificial por bombeio centrífugo submerso

From their early days, Electrical Submergible Pumping (ESP) units have excelled in lifting much greater liquid rates than most of the other types of artificial lift and developed by good performance in wells with high BSW, in onshore and offshore environments. For all artificial lift system, the lifetime and frequency of interventions are of paramount importance, given the high costs of rigs and equipment, plus the losses coming from a halt in production. In search of a better life of the system comes the need to work with the same efficiency and security within the limits of their equipment, this implies the need for periodic adjustments, monitoring and control. How is increasing the prospect of minimizing direct human actions, these adjustments should be made increasingly via automation. The automated system not only provides a longer life, but also greater control over the production of the well. The controller is the brain of most automation systems, it is inserted the logic and strategies in the work process in order to get you to work efficiently. So great is the importance of controlling for any automation system is expected that, with better understanding of ESP system and the development of research, many controllers will be proposed for this method of artificial lift. Once a controller is proposed, it must be tested and validated before they take it as efficient and functional. The use of a producing well or a test well could favor the completion of testing, but with the serious risk that flaws in the design of the controller were to cause damage to oil well equipment, many of them expensive. Given this reality, the main objective of the present work is to present an environment for evaluation of fuzzy controllers for wells equipped with ESP system, using a computer simulator representing a virtual oil well, a software design fuzzy controllers and a PLC. The use of the proposed environment will enable a reduction in time required for testing and adjustments to the controller and evaluated a rapid diagnosis of their efficiency and effectiveness. The control algorithms are implemented in both high-level language, through the controller design software, such as specific language for programming PLCs, Ladder Diagram language.

Estudo térmico dos resíduos gerados da destilação atmosférica das misturas diesel/biodiesel de dendê

The growing world demand for energy supplied by fossil fuels, a major contributor to the emission of pollutants into the atmosphere and causing environmental problems, has been encouraging governments and international organizations to reflect and encourage the use of alternative renewable sources. Among these new possibilities deserves attention biodiesel, fuel cleaner and easy to reproduce. The study of new technologies involving that source is necessary. From this context, the paper aims at analyzing the thermal stability by thermogravimetric analysis, of the waste generated from atmospheric distillation of mixtures with ratios of 5, 10, 15 and 20% palm biodiesel in diesel with and without addition of BHT antioxidant. It was synthesized biodiesel through palm oil, via homogeneous catalysis in the presence of KOH, with and without the use of BHT and subsequently added to the diesel common indoor type (S1800) from a gas station BR. The diesel was already added with 5% biodiesel, and thus the proportions used for these blends were subtracted from the existing ratio in diesel fuel, resulting in the following proportions palm oil biodiesel: 0% (B5), 5% (B10), 10 % (B15) and 15% (B20). From atmospheric distillation analysis, performed in mixtures with and without BHT were collected residue generated by each sample and performed a thermal study from the thermogravimetric analysis at a heating rate of 10 °C.min-1, nitrogen atmosphere and heating to 600 ° C. According to the specifications of Resolution No. 7/2008 for biodiesel, it was found that the material was synthesized in accordance with the specifications. For mixtures, it was noted that the samples were in accordance with the ANP Resolution No. 42/2009. Given the TG / DTG curves of the samples of waste mixtures with and without BHT antioxidant was able to observe that they showed a single stage of thermal decomposition attributed to decomposition of heavy hydrocarbons and esters and other heavier constituents of the waste sample weighed. The thermal behavior of residues from atmospheric distillation of mixtures of diesel / biodiesel is very important to understand how this affects the proper functioning of the engine. A large amount of waste can generate a high content of particulate material, coke formation and carbonaceous deposits in engine valves, compromising their performance

Síntese e caracterização do líquido iônico tetrafluoroborato de 1-metil-3-(2,6-(S)-dimetiloct-2-eno)-imidazol como eletrólito para produção de hidrogênio via eletrólise da água

Ionic liquids (ILs) are organic compounds liquid at room temperature, good electrical conductors, with the potential to form as a means for electrolyte on electrolysis of water, in which the electrodes would not be subjected to such extreme conditions demanding chemistry [1]. This paper describes the synthesis, characterization and study of the feasibility of ionic liquid ionic liquid 1-methyl-3(2,6-(S)-dimethyloct-2-ene)-imidazole tetrafluoroborate (MDI-BF4) as electrolyte to produce hydrogen through electrolysis of water. The MDI-BF4 synthesized was characterized by thermal methods of analysis (Thermogravimetric Analysis - TG and Differential Scanning Calorimetry - DSC), mid-infrared spectroscopy with Fourier transform by method of attenuated total reflectance (FTIR-ATR), nuclear magnetic resonance spectroscopy of hydrogen (NMR 1H) and cyclic voltammetry (CV). Where thermal methods were used to calculate the yield of the synthesis of MDI-BF4 which was 88.84%, characterized infrared spectroscopy functional groups of the compound and the binding B-F 1053 cm-1; the NMR 1H analyzed and compared with literature data defines the structure of MDI-BF4 and the current density achieved by MDI-BF4 in the voltammogram shows that the LI can conduct electrical current indicating that the MDI-BF4 is a good electrolyte, and that their behavior does not change with the increasing concentration of water

Modelagem matemática para o transporte de partículas sujeitas a múltiplos mecanismos de retenção

Discrepancies between classical model predictions and experimental data for deep bed filtration have been reported by various authors. In order to understand these discrepancies, an analytic continuum model for deep bed filtration is proposed. In this model, a filter coefficient is attributed to each distinct retention mechanism (straining, diffusion, gravity interception, etc.). It was shown that these coefficients generally cannot be merged into an effective filter coefficient, as considered in the classical model. Furthermore, the derived analytic solutions for the proposed model were applied for fitting experimental data, and a very good agreement between experimental data and proposed model predictions were obtained. Comparison of the obtained results with empirical correlations allowed identifying the dominant retention mechanisms. In addition, it was shown that the larger the ratio of particle to pore sizes, the more intensive the straining mechanism and the larger the discrepancies between experimental data and classical model predictions. The classical model and proposed model were compared via statistical analysis. The obtained p values allow concluding that the proposed model should be preferred especially when straining plays an important role. In addition, deep bed filtration with finite retention capacity was studied. This work also involves the study of filtration of particles through porous media with a finite capacity of filtration. It was observed, in this case, that is necessary to consider changes in the boundary conditions through time evolution. It was obtained a solution for such a model using different functions of filtration coefficients. Besides that, it was shown how to build a solution for any filtration coefficient. It was seen that, even considering the same filtration coefficient, the classic model and the one here propposed, show different predictions for the concentration of particles retained in the porous media and for the suspended particles at the exit of the media

Influência na qualidade final de metais retificados através da variação da velocidade de mergulho

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A saúde psíquica de quem faz saúde: uma análise crítica sobre a humanização direcionada ao profissional de saúde

It is noticeable that pressure, tension and overwork are frequent in health professionals routine. The work related to the ward area demands deep attention and surveillance. Because of that, it is essential to have a specific look at the humanization directed at health professionals, considering that taking care of other human beings is the essence of their job. This study has analyzed the psychic health levels, as well as the stress health professionals are submitted to, providing a debate about the humanization in 06 public hospitals (03 of them awarded by actions of humanization, and 03 not awarded) in Rio Grande do Norte state, Brazil. A study with 126 active health professionals (doctors, nurses, psychologists, nutritionists and social workers) in ward areas in their respective institutions was carried out. The thesis presented, with multi-disciplinary characteristic, counted on the support of statisticians (to calculate samples and data analysis), psychologists, social workers and administrators (linked to the human resources sector in each hospital). A cross-sectional study was performed, taking into consideration both quantitative and qualitative factors. The tools used for that were a semistructured questionnaire with socio-demographic characteristics, work and humanization; Lipp's Stress Symptoms Inventory for Adults (ISSL), and the Goldberg s General Health Questionnaire (QSG). The workers are predominantly women (84,9%), married (54,8%), between 46 and 55 years old (40,5%), working in the same institution for more than 20 years (22,2%), and between 16 and 20 years (20,6%), respectively. They work 40 hours a week (71,4%) and have multiple jobs (61,9%). Although most of these individuals global psychic health is in a good level, there are a significant number of people that is gradually getting worse concerning psychic stress (F1) showed by QSG (54,7%), and stress showed by ISSL(42,1%). Observing the categories, nurses (41,5%). Nutritionists (20,8%), doctors and social workers (18,9%), were among the most affected. About general health (F6), 63% of the awarded hospitals and 70% of the not awarded ones, presented good health levels (ranging from 5 to 50%). It was also noticed that, in the groups mentioned above, 25 and 20% respectively, were inserted in scores between 55 to 90%, what means that they are in worsening phase. The fact that the hospital is awarded or well recognized doesn t interfere in health professionals stress level and in their psychic health. Through what was heard from these individuals, it was possible to verify that they know little about humanization, once few of them identify or know that the service they offer is in an adoption process by Ministerial Policies. It was also detected the necessity of developing actions aimed at worker s health. Such results showed the importance of have more investments in programs that are directed to workers well-being, because they deal with other people s health and it is known that it is difficult for them to offer high-quality assistance if there are not suitable physical, psychological and material conditions to help them develop their jobs. As a warning, it is fair to say that investments in actions that provide humanized care to health professionals, mainly concerning preventive care for their health and life quality in their work

Hemiparesia congênita e adquirida na criança: interrelação entre presença de crises epilépticas, os achados eletrencefalográficos e de neuroimagem por ressonância nuclear magnética

The purpose of this paper was to study patients with congenital and acquired hemiparesis, their clinical aspects, the presence or not of epileptic seizures, and electroencephalographic (EEG) and Magnetic Resonance Imaging (MRI) findings. We analyzed the interrelation between etiology, the presence and seriousness of epileptic seizures (ES) and the possible causes of refractoriness. This is a prospective study using the clinical diagnosis of a child neurologist, who attested to the presence of unilateral motor lesions. We compared the electroencephalographic findings in patients with or without epileptic seizures, and investigated if among the former, these seizures were controlled or not, their likely etiology and risks of refractoriness. EEG background activity on the lesion and contralateral side was analyzed, in addition to the presence of concomitant epileptiform activity. Encephalon MRIs of all the patients were studied to correlate etiology and the control or not of epileptic seizures. The disorganization of bilateral EEG activity correlated with the difficult-to-control epileptic seizures. Suitably organized background activity contralateral to the lesion is a good prognosis in relation to epileptic seizures. Focal epileptogenic activity does not necessarily predispose to epileptic manifestation. The MRI is more important in determining etiology than in prognosing epileptic seizures. This study used a multidisciplinary approach involving child neurologists, a physical therapist and a neuroradiologist. This meets the criteria of multidisciplinarity of the Postgraduate Program in Health Sciences

Desmame em recém-nascidos de muito baixo peso ao nascer no primeiro retorno ambulatorial após a alta hospitalar

Investigate intrahospital and neonatal determinants associated to the weaning of very low birth weight (VLBW) infants. Methods: 119 VLBW (<1500g) infants 81 were monitored from July 2005 through August 2006, from birth to the first ambulatory visit after maternity discharge. This maternity unit uses the Kangaroo Method and the Baby Friendly Hospital Initiative. Results: Out of 119 VLBW infants monitored until discharge, 88 (75%) returned to the facility, 22 (25%) were on exclusive breastfeeding (EB) and 66 (75%) were weaned (partial breastfeeding or formula feeding). Univariate analysis found an association between weaning and lower birth weight, longer stays in the NICU and longer hospitalization times, in addition to more prolonged enteral feeding and birth weight recovery period. Logistic regression showed length of NICU stay as being the main determinant of weaning. Conclusion: The negative repercussion on EB of an extended stay in the NICU is a significant challenge for health professionals to provide more adequate nutrition to VLBW infants

Prescrição de exercício físico para mulheres com síndrome dos ovários policísticos: impacto sobre a aptidão cardiorrespiratória e resposta afetiva

analisar o efeito do treinamento aeróbio periodizado sobre a aptidão cardiorrespiratória e respostas afetivas em mulheres com síndrome dos ovários policísticos (SOP) e II) investigar se o exercício aeróbio realizado na zona de prazer para essa população atende a recomendação do American College of Sports Medicine (ACSM) no que se refere à intensidade para melhoria da saúde. Metodologia: foram incluídas mulheres na faixa etária entre 18 e 34 anos, com diagnóstico de SOP de acordo com o Consenso de Rotterdam. Para o subestudo I, oito pacientes sedentárias participaram de 16 semanas de treinamento aeróbio com incrementos mensais de intensidade: fase 1 = 60-70% da frequência cardíaca máxima (FCmax); fase 2 = 70-75% da FCmax; fase 3 = 75-80% da FCmax; fase 4 = 80-85% da FCmax. A intervenção foi realizada três vezes por semana, 40 minutos por sessão. Em todas as sessões foram registradas as respostas afetivas (Feeling Scale -5/+5) e a percepção subjetiva do esforço (escala de Borg CR 6-20). Antes e após a intervenção, as voluntárias realizaram teste ergoespirométrico. Para o subestudo II, 11 pacientes realizaram duas sessões de exercício aeróbio na zona de prazer, sendo registrados parâmetros relativos à demanda física através de receptor de GPS (Global Positioning System) de pulso com cardiofrequencímetro acoplado. As pacientes foram instruídas a realizar 40 minutos de exercício guiadas pelas âncoras verbais bom e muito bom (+3 e +5 na Feeling Scale). Resultados: no subestudo I, após 16 semanas de treinamento, houve aumento da aptidão cardiorrespiratória máxima (17,3%) e submáxima (21,5%). As respostas afetivas variaram entre bom (+3,1 ± 0,8) e razoavelmente bom xi (1,0 ± 0,9) e a percepção subjetiva do esforço entre muito leve a leve (10,2 ± 0,7) e um pouco difícil (12,7 ± 0,6) durante a intervenção. No subestudo II, as pacientes exercitaram-se a ~72,5 ± 6% da FC máxima, ~78,5 ± 6% da FC no limiar anaeróbio e passaram > 95% do tempo em intensidade moderada (~82%) e vigorosa (~16%) durante as sessões experimentais. Em média, as voluntárias reportaram as sessões como fácil (percepção subjetiva do esforço da sessão ~2,2 ± 0,7). Conclusões: o programa de treinamento aeróbio periodizado aumentou a aptidão cardiorrespiratória das pacientes analisadas e foi percebido como uma intervenção prazerosa. Adicionalmente, exercício aeróbio realizado de forma prazerosa atende a recomendação do ACSM no que se refere à intensidade para melhoria da saúde

Aptidão física relacionada à saúde de escolares Norte- Rio-Grandenses

O sedentarismo é cada vez mais acentuado entre os adolescentes em todo o mundo. Objetivou-se neste estudo analisar o estado nutricional e a aptidão física de escolares norte-rio-grandenses. Participaram 2065 sujeitos, selecionados aleatoriamente (Masc = 1066, Fem = 999) (Natal n=1158; Mossoró n= 312; Lajes n= 231), divididos em três grupos etários pelos estágios maturacionais: 10 a 12 anos, 13 a 14 anos e _ 15 anos. Foi avaliada a composição corporal (IMC, dobras cutâneas tríceps e subescapular); o hábito alimentar (questionário de prevalência do consumo por grupo alimentar); o índice de atividade física (questionário Baeck) e o nível de aptidão física (testes do salto em distância, flexibilidade, resistência abdominal e cardiovascular). Utilizando-se a estatística descritiva, testes de médias pela análise dos intervalos de confiança, o teste de Kruskall-Wallis, teste t, o Qui2 e o coeficiente de contingência. Encontraram-se diferenças significativas com p < 0001 na distribuição do índice de massa corporal (n = 1701); Região Leste Potiguar (RLP) com excesso de peso e obesidade de 16,8 % e 15,2 %, a Região Oeste 16,3% e 9,6 % e a Região Central 10,4 % e 3,9 %, com as escolas privadas contribuindo significativamente na prevalência dessas variáveis nas RLP e ROP com p < 0,003 e p < 0,001 respectivamente. O hábito alimentar demonstrou que 98,3% dos sujeitos consomem alimentos do grupo das massas 98,3%; cereais 97,7%; laticínios 94,7%; frutas 92,3%; gorduras 88,3% e as hortaliças 61,6%, não havendo diferenças significativas no consumo alimentar entre o tipo de escolas e gênero (n = 300). No índice de atividade física habitual há diferenças entre esses respectivos extratos: 2,65±0,78 e 2,81±0,80 (p < 0,014) e 2,89±0,82 e 2,57±0,78 (p < 0,001), com as práticas de atividades esportivas, programas de exercícios físicos e lazer ativo mais significativo em escolas privadas 2,85 ± 1,06 e 3,37±1,26 (p < 0,001) em prol do sexo masculino com 3,47±1,24 e 2,75±1,03 (p <0,001). Resistência abdominal ( =19) e força de membros inferiores ( =128,5 cm) foram classificadas como muito fraco , a flexibilidade ( =26,9 cm) razoável e resistência geral ( =1439 m) como bom . Conclui-se que o hábito alimentar e o baixo índice de atividade física habitual influenciam negativamente os índices da aptidão física relacionada à saúde dos escolares, com menor incidência em instituições privadas em função das práticas esportivas. Este estudo apresenta relação de interface multidisciplinar, tendo o seu conteúdo uma aplicação nos campos da Medicina, Nutrição e Educação Física