Reforma a vapor catalítica do metano: Otimização da produção e seletividade em hidrogênio por absorção in situ do CO2 produzido

Topics of research related to energy and environment have significantly grown in recent years, with the need of its own energy as hydrogen. More particularly, numerous researches have been focused on hydrogen as energy vector. The main portion of hydrogen is presently obtained by reforming of methane or light hydrocarbons (steam, oxy, dry or auto reforming). During the methane steam reforming process the formation of CO2 undesirable (the main contributor to the greenhouse effect) is observed. Thus, an oxide material (sorbent) can be used to capture the CO2 generated during the process and simultaneously shifting the equilibrium of water gas shift towards thermodynamically more favorable production of pure hydrogen. The aim of this study is to develop a material with dual function (catalyst/sorbent) in the reaction of steam reforming of methane. CaO is well known as CO2 sorbent due to its high efficiency in reactions of carbonation and easy regeneration through calcination. However the kinetic of carbonation decreases quickly with time and carbonation/calcination cycles. A calcium aluminate (Ca12Al14O33) should be used to avoid sintering and increase the stability of CaO sorbents for several cycles. Nickel, the industrial catalyst choice for steam reforming has been added to the support from different manners. These bi-functional materials (sorbent/catalyst) in different molar ratios CaO.Ca12Al14O33 (48:52, 65:35, 75:25, 90:10) were prepared by different synthesis methodologies, among them, especially the method of microwave assisted self-combustion. Synthesis, structure and catalytic performances of Ni- CaO.Ca12Al14O33 synthesized by the novel method (microwave assisted selfcombustion) proposed in this work has not being reported yet in literature. The results indicate that CO2 capture time depends both on the CaO excess and on operating conditions (eg., temperature and H2O/CH4 ratio). To be efficient for CO2 sorption, temperature of steam reforming needs to be lower than 700 °C. An optimized percentage corresponding to 75% of CaO and a ratio H2O/CH4 = 1 provides the most promising results since a smaller amount of water avoids competition between water and CO2 to form carbonate and hydroxide. If this competition is most effective (H2O/CH4 = 3) and would have a smaller amount of CaO available for absorption possibly due to the formation of Ca(OH)2. Therefore, the capture time was higher (16h) for the ratio H2O/CH4 = 1 than H2O/CH4 = 3 (7h) using as catalyst one prepared by impregnating the support obtained by microwave assisted self-combustion. Therefore, it was demonstrated that, with these catalysts, the CO2 sorption on CaO modifies the balance of the water gas-shift reaction. Consequently, steam reforming of CH4 is optimized, producing pure H2, complete conversion of methane and negligible concentration of CO2 and CO during the time of capture even at low temperature (650 °C). This validates the concept of the sorption of CO2 together with methane steam reforming

Degradação eletroquímica de benzeno, tolueno e xileno via oxidação eletroquímica utilizando eletrodo Ti/Pt

This work is directed to the treatment of organic compounds present in produced water from oil using electrochemical technology. The water produced is a residue of the petroleum industry are difficult to treat , since this corresponds to 98 % effluent from the effluent generated in the exploration of oil and contains various compounds such as volatile hydrocarbons (benzene, toluene, ethylbenzene and xylene), polycyclic aromatic hydrocarbons (PAHs), phenols, carboxylic acids and inorganic compounds. There are several types of treatment methodologies that residue being studied, among which are the biological processes, advanced oxidation processes (AOPs), such as electrochemical treatments electrooxidation, electrocoagulation, electrocoagulation and eletroredution. The electrochemical method is a method of little environmental impact because instead of chemical reagents uses electron through reactions of oxide-reducing transforms toxic substances into substances with less environmental impact. Thus, this paper aims to study the electrochemical behavior and elimination of the BTX (benzene, toluene and xylene) using electrode of Ti/Pt. For the experiment an electrochemical batch system consists of a continuous source, anode Ti/Pt was used, applying three densities of current (1 mA/cm2, 2,5 mA/cm2 and 5 mA/cm2). The synthetic wastewater was prepared by a solution of benzene, toluene and xylene with a concentration of 5 ppm, to evaluate the electrochemical behavior by cyclic voltammetry and polarization curves, even before assessing the removal of these compounds in solution by electrochemical oxidation. The behavior of each of the compounds was evaluated by the use of electrochemical techniques indicate that each of the compounds when evaluated by cyclic voltammetry showed partial oxidation behavior via adsorption to the surface of the Ti/Pt electrode. The adsorption of each of the present compounds depends on the solution concentration but there is the strong adsorption of xylene. However, the removal was confirmed by UV-Vis, and analysis of total organic carbon (TOC), which showed a percentage of partial oxidation (19,8 % - 99,1 % TOC removed), confirming the electrochemical behavior already observed in voltammetry and cyclic polarization curves

Degradação térmica e catalítica do resíduo atmosférico de petróleo (RAT), utilizando materiais nanoestruturados do tipo SBA-15

In this work were synthesized and characterized the materials mesoporous SBA-15 and Al- SBA-15, Si / Al = 25, 50 and 75, discovered by researchers at the University of California- Santa Barbara, USA, with pore diameters ranging from 2 to 30 nm and wall thickness from 3.1 to 6.4 nm, making these promising materials in the field of catalysis, particularly for petroleum refining (catalytic cracking), as their mesopores facilitate access of the molecules constituting the oil to active sites, thereby increasing the production of hydrocarbons in the range of light and medium. To verify that the materials used as catalysts were successfully synthesized, they were characterized using techniques of X-ray diffraction (XRD), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). Aiming to check the catalytic activity thereof, a sample of atmospheric residue oil (ATR) from the pole Guamaré-RN was performed the process by means of thermogravimetry and thermal degradation of catalytic residue. Upon the curves, it was observed a reduction in the onset temperature of the decomposition process of catalytic ATR. For the kinetic model proposed by Flynn-Wall yielded some parameters to determine the apparent activation energy of decomposition, being shown the efficiency of mesoporous materials, since there was a decrease in the activation energy for the reactions using catalysts. The ATR was also subjected to pyrolysis process using a pyrolyzer with gas chromatography coupled to a mass spectrometer. Through the chromatograms obtained, there was an increase in the yield of the compounds in the range of gasoline and diesel from the catalytic pyrolysis, with emphasis on Al-SBA-15 (Si / Al = 25), which showed a percentage higher than the other catalysts. These results are due to the fact that the synthesized materials exhibit specific properties for application in the process of pyrolysis of complex molecules and high molecular weight as constituents of the ATR

Síntese e caracterização de zeólita beta hierarquizada e materiais híbridos micro-mesoporosos aplicados no craqueamento de PEAD

A catalyst of great interest to the scientific community tries to unite the structure of ordered pore diameter from mesoporous materials with the properties of stability and acid activity to microporous zeolites. Thus a large number of materials was developed in the past decades, which although being reported as zeolites intrinsically they fail to comply with some relevant characteristics to zeolites, and recently were named zeolitic materials of high accessibility. Among the various synthesis strategies employed, the present research approaches the synthesis methods of crystallization of silanized protozeolitic units and the method of protozeolitic units molded around surfactant micelles, in order for get materials defined as hierarchical zeolites and micro-mesoporous hybrid materials, respectively. As goal BEA/MCM-41 hybrid catalysts with bimodal pore structure formed by nuclei of zeolite Beta and cationic surfactant cetyltrimethylammonium were developed. As also was successfully synthesized the hierarchical Beta zeolite having a secondary porosity, in addition to the typical and uniform zeolite micropores. Both catalysts were applied in reactions of catalytic cracking of high density polyethylene (HDPE), to evaluate its properties in catalytic activity, aiming at the recycling of waste plastics to obtain high value-added raw materials and fuels. The BEA/MCM-41 hybrid materials with 0 days of pre-crystallization did not show enough properties for use in catalytic cracking reactions, but they showed superior catalytic properties compared to those ordered mesoporous materials of Al-MCM-41 type. The structure of Beta zeolite with hierarchical porosity leads the accessibility of HDPE bulky molecules to active centers, due to high external area. And provides higher conversion to hydrocarbons in the gasoline range, especially olefins which have great interest in the petrochemical industry

Avaliação da remoção catalítica de compostos orgânicos monoaromáticos em água utilizando materiais nanoestruturados de sílica

Statistics of environmental protection agencies show that the soil has been contaminated with problems often resulting from leaks, spills and accidents during exploration, refining, transportation and storage oil operations and its derivatives. These, gasoline noteworthy, verified by releasing, to get in touch with the groundwater, the compounds BTEX (benzene, toluene, ethylbenzene and xylenes), substances which are central nervous system depressants and causing leukemia. Among the processes used in remediation of soil and groundwater contaminated with organic pollutants, we highlight those that use hydrogen peroxide because they are characterized by the rapid generation of chemical species of high oxidation power, especially the hydroxyl radical ( OH), superoxide (O2 -) and peridroxil (HO2 ), among other reactive species that are capable of transforming or decomposing organic chemicals. The pH has a strong effect on the chemistry of hydrogen peroxide because the formation of different radicals directly depends on the pH of the medium. In this work, the materials MCM-41 and Co-MCM-41 were synthesized and used in the reaction of BTEX removal in aqueous media using H2O2. These materials were synthesized by the hydrothermal method and the techniques used to characterize were: XRD, TG/DTG, adsorption/desorption N2, TEM and X-Ray Fluorescence. The catalytic tests were for 5 h of reaction were carried out in reactors of 20 mL, which was accompanied by the decomposition of hydrogen peroxide by molecular absorption spectrophotometry in the UV-Vis, in addition to removal of organic compounds BTEX was performed as gas chromatography with detection photoionization and flame ionization and by static headspace sampler. The characterizations proved that the materials were successfully synthesized. The catalytic tests showed satisfactory results, and the reactions containing BTEX + Co-MCM-41 + H2O2 at pH = 12.0 had the highest percentages of removal for the compounds studied

Estratégia anestesiológica para cesariana em paciente portadora de deficiência de fator XI: relato de caso

JUSTIFICATIVA E OBJETIVOS: A deficiência do fator XI é uma doença hematológica rara na população. A hemofilia C (deficiência do fator XI) ocorre em ambos os sexos e normalmente não apresenta qualquer sintomatologia, podendo manifestar-se apenas como hemorragia pós-cirúrgica. É uma doença autossômica recessiva, homozigótica ou heterozigótica, e sua gravidade depende dos níveis de fator XI. O objetivo desse relato foi apresentar a estratégia anestésica em paciente portadora de hemofilia C. RELATO do CASO: Paciente com 32 anos, gesta I/para 0, 39 semanas de gestação programada para cesariana eletiva. Paciente portadora de deficiência de fator XI. Exame clínico e laboratorial sem alterações. Conforme orientação do hematologista, no dia da cesárea a paciente usou prometazina 25 mg; hidrocortisona 500 mg, devido a reações transfusionais prévias, e plasma 10 mL-1.kg-1 num total de 700 mL. Após 2 horas foi submetida ao bloqueio subaracnóideo sob monitorização de rotina. Hidratação com RL 2000 mL. Procedimento anestésico-cirúrgico sem intercorrências. A paciente evoluiu no pós-operatório sem intercorrências, sendo que no 3º DPO fez uso de plasma fresco congelado (PFC) 10.mL-1.kg-1 com o objetivo de evitar sangramento pós cirúrgico tardio. CONCLUSÕES: O objetivo do caso foi apresentar o protocolo anestésico para pacientes portadores de hemofilia C e alertar para a necessidade de investigação em caso de antecedente de sangramento pós-operatório, quando um estudo da coagulação deve ser realizado antes de qualquer procedimento invasivo e, se um TTPA prolongado for encontrado, torna-se imperativo pesquisar a deficiência desse fator.

Avaliação de arquitetura de agentes emocionais : uma abordagem baseada em métrica de qualidade e na influência das emoções sobre usuários

There is a need for multi-agent system designers in determining the quality of systems in the earliest phases of the development process. The architectures of the agents are also part of the design of these systems, and therefore also need to have their quality evaluated. Motivated by the important role that emotions play in our daily lives, embodied agents researchers have aimed to create agents capable of producing affective and natural interaction with users that produces a beneficial or desirable result. For this, several studies proposing architectures of agents with emotions arose without the accompaniment of appropriate methods for the assessment of these architectures. The objective of this study is to propose a methodology for evaluating architectures emotional agents, which evaluates the quality attributes of the design of architectures, in addition to evaluation of human-computer interaction, the effects on the subjective experience of users of applications that implement it. The methodology is based on a model of well-defined metrics. In assessing the quality of architectural design, the attributes assessed are: extensibility, modularity and complexity. In assessing the effects on users' subjective experience, which involves the implementation of the architecture in an application and we suggest to be the domain of computer games, the metrics are: enjoyment, felt support, warm, caring, trust, cooperation, intelligence, interestingness, naturalness of emotional reactions, believabiliy, reducing of frustration and likeability, and the average time and average attempts. We experimented with this approach and evaluate five architectures emotional agents: BDIE, DETT, Camurra-Coglio, EBDI, Emotional-BDI. Two of the architectures, BDIE and EBDI, were implemented in a version of the game Minesweeper and evaluated for human-computer interaction. In the results, DETT stood out with the best architectural design. Users who have played the version of the game with emotional agents performed better than those who played without agents. In assessing the subjective experience of users, the differences between the architectures were insignificant

Topical (S)-ketamine for pain management of postherpetic neuralgia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

End-to-end arterial anastomosis with fibrin glue in larger arteries: histology, hydroxyproline concentration and tensile strength study in carotids of rabbits

A anastomose arterial término-terminal é demorada, requer tempo prolongado de oclusão vascular e esta associada a necrose focal, infiltração leucocitária e, conseqüentemente, à fibrose e calcificação da parede arterial. A cola de fibrina é uma alternativa para a anastomose microvascular e pode evitar estas alterações com menor aderência aos tecidos vizinhos e melhor coaptação das bordas arteriais. OBJETIVO: Comparar o processo cicatricial de anastomoses convencionais com anastomoses feitas com cola de fibrina em artérias maiores. MÉTODOS: em 22 coelhos, ambas carótidas foram seccionadas transversalmente e reconstruídas por meio de anastomose término-terminal com 4 pontos simples de reparo e cola de fibrina de um lado (G1), e com 8 pontos separados do outro lado (G2). Após 3 e 15 dias, os animais foram destinados aleatoriamente para estudo de força tênsil concentração de hidroxiprolina (8 animais) e avaliação histológica das anastomoses (3 animais). As lâminas histológicas foram coradas pelo HE Masson e Picrossirius polarização (PSP). RESULTADOS: Após 3 e 15 dias a força tênsil aumenta em ambos os grupos, de 280,0± 32,6g para 432,2± 131,2g no Grupo 1 e de 221,4± 72,4g para 452,2± 132,0g no Grupo 2; sem diferença estatística entre os grupos em cada período. A concentração de hidroxiprolina expressa como razão hidroxiprolina/proteína, variou de 0,0816± 0,0651 para 0,0622± 0,0184 no Grupo 1 e de 0,0734± 0,0577 para 0,0460± 0,0271 no Grupo 2; sem diferença estatística entre os períodos e grupos. Os estudos histológicos mostraram discreto aumento das reações de inflamação e reparação no Grupo 2. A técnica PSP mostrou predomínio do colágeno tipo I em relação do colágeno tipo II nas anastomoses de ambos os grupos, sem diferença expressiva entre esses grupos. CONCLUSÃO: A anastomose com a cola de fibrina foi menos lesiva para a parede arterial do que a anastomose convencional. Mesmo usando menos pontos, as características de força tênsil e de cicatrização da anastomose com cola de fibrina foram similares em ambos os grupos. Os tempos de realização das anastomoses foram significativamente maiores do que na anastomose convencional.

Piomiosite tropical: apresentações atípicas

A piomiosite tropical é uma infecção primária dos músculos, que ocorre principalmente em países tropicais. Inicialmente, suas manifestações são leves e inespecíficas, o que dificulta o diagnóstico. A história natural dessa doença costuma ser benigna, com raras complicações. Essa apresentação descreve quatro casos de piomiosite, com manifestações e complicações peculiares.

Desenvolvimento de sistema magnético polimérico contendo antimicrobianos para tratamento de infecções por Helicobacter pylori

Helicobacter pylori is the main cause of gastritis, gastroduodenal ulcer disease and gastric cancer. The most recommended treatment for eradication of this bacteria often leads to side effects and patient poor compliance, which induce treatment failure. Magnetic drug targeting is a very efficient method that overcomes these drawbacks through association of the drug with a magnetic compound. Such approach may allow such systems to be placed slowed down to a specific target area by an external magnetic field. This work reports a study of the synthesis and characterization of polymeric magnetic particles loaded with the currently used antimicrobial agents for the treatment of Helicobacter pylori infections, aiming the production of magnetic drug delivery system by oral route. Optical microscopy, scanning electron microscopy, transmission electron microscopy, x-ray powder diffraction, nitrogen adsorption/desorption isotherms and vibrating sample magnetometry revealed that the magnetite particles, produced by the co-precipitation method, consisted of a large number of aggregated nanometer-size crystallites (about 6 nm), creating superparamagnetic micrometer with high magnetic susceptibility particles with an average diameter of 6.8 ± 0.2 μm. Also, the polymeric magnetic particles produced by spray drying had a core-shell structure based on magnetite microparticles, amoxicillin and clarithromycin and coated with Eudragit® S100. The system presented an average diameter of 14.2 ± 0.2 μm. The amount of magnetite present in the system may be tailored by suitably controlling the suspension used to feed the spray dryer. In the present work it was 2.9% (w/w). The magnetic system produced may prove to be very promising for eradication of Helicobacter pylori infections

Avaliação do Tratamento da Paracoccidioidomicose Com O Ketoconazol

Foram, tratados 12 doentes atendidos na Disciplina de Moléstias Infecciosas e Parasitárias da Faculdade de Medicina de Botucatu com diagnóstico etiológico de paracoccidioidomicose que apresentavam lesões orgânicas múltiplas e evolução prolongada. O tratamento foi realizado por 18 meses, com o ketoconazol, pela via oral, nas doses diárias de 400 mg no primeiro mês e de 200 mg nos meses seguintes. Todos os doentes foram acompanhados durante o tratamento e, em média 4 meses e meio após o mesmo, clínica, radiológica e sorologicamente pelas reações de imunofluorescência indireta, precipitinas e imunodifusão em gel. A competência imunitária foi avaliada em todos os doentes antes do tratamento e repetida em quatro, no final do mesmo. Os resultados mostraram que houve recaída em 5 doentes. A droga foi bem tolerada e a imunodifusão em gel e a hemossedimentação foram as provas que mostraram maior paralelismo com a evolução clínica.

Análise espectroscópica da estrela HD 150050: uma nova estrela gigante rica em lítio

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Estudo do fluxo de neutrino solar com o código evolutivo de Toulouse - Geneva

The study of solar neutrinos is very important to a better comprehension of the set of nuclear reactions that occurs inside the Sun and in solar type stars. The ux of neutrinos provides a better comprehension of the stellar structure as a whole. In this dissertation we study the ux of neutrinos in a solar model, addressing the neutrino oscillation, analyzing with the intention of determining and verify the distribution from a statistical point of view, since this ux depends on the particles intrinsic velocity distributions in stellar plasma. The main tool for this analysis was the Toulouse-Geneva Stellar Evolution Code, or TGEC, which allow us to obtain the neutrino ux values per reaction and per layer inside the Sun, allowing us to compare the observational results for the neutrino ux detected on experiments based on Cl37 (Homestake), Ga71 (SAGE, Gallex/GNO) and water (SNO). Our results show the nal distribution for neutrino ux as a function of the depth using the coordinates of mass and radius. The dissertation also shows that the equations for this ux are present in TGEC.

Skin reactions to drugs

OBJECTIVE - To assess drug reactions and report the drugs involved and the most frequent types of skin reactions.METHODS - A retrospective and descriptive study. Data of inpatients at the Dermatology Ward with initial diagnosis of adverse drug reactions were evaluated from January 1999 to June 2004. Patients with confirmed diagnosis were included in the study based on clinical and histopathological criteria, after analysis of medical charts.RESULTS - Initial diagnosis of adverse drug reactions was confirmed in 121 patients. Forty-three patients were included in the study; 51.2% were females and 86% were caucasians. A total of 48,8% were on one drug only. Antibiotics were the most commonly used drug (20%) and accounted for 33% of the drug eruptions. The second group comprised anti-inflammatory drugs (16 7%), followed by anticonvulsants (13%), analgesic/antipyretic (13%.) agents. Skin eruption manifested as maculopapular exanthema in 41.9% patients, erythrodermia in 25.6%, and urticaria in 23.3%.CONCLUSION - Maculopapular exanthema was the main type of skin reaction triggered by use of drugs, and these reactions were most frequently caused by antibiotics.