(1)H NMR spectroscopy as a tool to determine accurate photoisomerization quantum yields of stilbene-like ligands coordinated to rhenium(I) polypyridyl complexes

In this work, the use of proton nuclear magnetic resonance, (1)H NMR, was fully described as a powerful tool to follow a photoreaction and to determine accurate quantum yields, so called true quantum yields (Phi(true)), when a reactant and photoproduct absorption overlap. For this, Phi(true) for the trans-cis photoisomerization process were determined for rhenium(I) polypyridyl complexes, fac-[Re(CO)(3)(NN)(trans-L)](+) (NN = 1,10-phenanthroline, phen, or 4,7-diphenyl-1,10-phenanthroline, ph(2)phen, and L = 1,2-bis(4-pyridyl) ethylene, bpe, or 4-styrylpyridine, stpy). The true values determined at 365 nm irradiation (e. g. Phi(NMR) = 0.80 for fac-[Re(CO)(3)(phen)(trans-bpe)](+)) were much higher than those determined by absorption spectral changes (Phi(UV-Vis) = 0.39 for fac-[Re(CO)(3)(phen)(trans-bpe)](+)). Phi(NMR) are more accurate in these cases due to the distinct proton signals of trans and cis-isomers, which allow the actual determination of each component concentration under given irradiation time. Nevertheless when the photoproduct or reactant contribution at the probe wavelength is negligible, one can determine Phi(true) by regular absorption spectral changes. For instance, Phi(313) nm for free ligand photoisomerization determined both by absorption and (1)H NMR variation are equal within the experimental error (bpe: Phi(UV-Vis) = 0.27, Phi(NMR) = 0.26; stpy: Phi(UV-Vis) = 0.49, Phi(NMR) = 0.49). Moreover, (1)H NMR data combined with electronic spectra allowed molar absorptivity determination of difficult to isolate cis-complexes. (C) 2009 Elsevier B. V. All rights reserved.

Atmospheric pressure photoionization mass spectrometry as a tool for the investigation of the hydrolysis reaction mechanisms of phosphite antioxidants

The hydrolysis reaction mechanism of phosphite antioxidants is investigated by liquid chromatography-mass spectrometry (LC/MS). The phosphites were chosen because they differed in chemical structure and phosphorus content. Dopant assisted-atmospheric pressure photoionization (DA-APPI) is chosen as the ion source for (lie ionization of the compounds. [it our previous work, DA-APPI was shown to offer an attractive alternative to atmospheric pressure chemical ionization (APCI) since it provided background-ion free mass spectra and higher sensitivity [M. Papanastasiou, et al., Polymer Degradation and Stability 91 (11) (2006) 2675-2682]. In positive ion mode, the molecules are generally detected in their protonated form. In negative ion mode, the phosphites are unstable and only fragment ions are observed: these however, are characteristic of each phosphite and may be used for the identification of the analytes in complex mixtures. The analytes under investigation are exposed to accelerated humid ageing conditions and their hydrolytic pathway and stability is investigated. Different substituents around the phosphorus atom are shown to have a significant effect on the stability of the phosphites, with phenol substituents producing very hydrolytically stable structures. Alkanox P24 and PEP-36 follow a similar hydrolytic pathway via the scission of the first and then the second P-O-phenol bonds, eventually leading to the formation of phenol, Phosphorous acid and pentaerythritol as end products. HP-10 exhibits a rather different Structure and the products detected suggest scission of either the P-O-hydrocarbon or one of the P-O-phenol bonds. A phenomenon similar to that of autocatalysis is observed for all phosphites and is attributed to the formation of dialkyl phosphites as intermediate products. (C) 2008 Elsevier B.V. All rights reserved.

Lithographic Technology Students in the Lab

Students are from the Lithography Department of the New York Trade School are shown working in a lab. Black and white photograph that has some writing along the outer edge.

Validering av Alberta Context Tool (ACT) för bruk inom svensk kommunal äldrevård : Ett verktyg för implementering av evidensbaserad vård

The aim of this study was to conduct an instrument test of the Canadian questionnaire Alberta Context Tool (ACT) version Long-Term care for Swedish conditions. ACT is designed in order to measure the context in the care environment and different behaviours related to the changes in clinical practice. In total, 159 Licensed Practical Nurses (LPNs) and Registered Nurses (RNs) within municipality care of the elderly were included in the survey. The test included the instrument's reliability and face validity.The reliability test was implemented through calculation of Cronbach´s Alpha, and showed internal consistency for five of the scales of the ACT-instrument with Cronbach´s Alpha values ranging between 0,728 and 0,873. However, three dimensions got lower values (0,558 - 0,683).The analysis was carried out with content analysis and carried out for LPNs and RNs in separate groups. The majority of LPNs expressed that it was easy to respond to the questions (56%), while nine percent considered it as difficult. Eleven comments were given about questions that were perceived to be unclear, complicated or contained difficult words. In the RN group only 30 percent considered that the questions were easy to respond to. One third of the RNs considered that part of the questions were unclear, and six RNs expressed also which questions they experienced as unclear. In general, the questions in the ACT were perceived as relevant. The instrument's relevance as a tool to measure contextual factors that influence the implementation of evidence based nursing can also be considered to be determined. By modifying the content in the questionnaire in accordance with what appeared in this survey and to implement yet another test, the instrument should be considered to be relevant for use within Swedish municipality care of the elderly. ACT can be used both as a tool in the work on improvement of clinical practice and as a tool for further research about implementation of evidence based nursing.

Personalized Communications : A Cross Media tool for the future

Personalized communication is when the marketing message is adapted to each individual by using information from a databaseand utilizing it in the various, different media channels available today. That gives the marketer the possibility to create a campaign that cuts through today’s clutter of marketing messages and gets the recipients attention. PODi is a non-profit organization that was started with the aim of contributing knowledge in the field of digital printingtechnologies. They have created a database of case studies showing companies that have successfully implemented personalizedcommunication in their marketing campaigns. The purpose of the project was therefore to analyze PODi case studies with the main objective of finding out if/how successfully the PODi-cases have been and what made them so successful. To collect the data found in the PODi cases the authors did a content analysis with a sample size of 140 PODi cases from the year 2008 to 2010. The study was carried out by analyzing the cases' measurable ways of success: response rate, conversion rate, visited PURL (personalized URL:s) and ROI (Return On Investment). In order to find out if there were any relationships to be found between the measurable result and what type of industry, campaign objective and media vehicle that was used in the campaign, the authors put up different research uestions to explore that. After clustering and merging the collected data the results were found to be quite spread but shows that the averages of response rates, visited PURL and conversion rates were consistently very high. In the study the authors also collected and summarized what the companies themselves claim to be the reasons for success with their marketing campaigns. The resultshows that the creation of a personalized campaign is complex and dependent on many different variables. It is for instance ofgreat importance to have a well thought-out plan with the campaign and to have good data and insights about the customer in order to perform creative personalization. It is also important to make it easy for the recipient to reply, to use several media vehicles for multiple touch points and to have an attractive and clever design.

Är organisationen mogen för evidensbaserad vård? : översättning och validering av Alberta Context Tool och beskrivning av sjuksköterskors skattning av kontextuella faktorer inom ortopedisk vård

Syftet med denna studie var att reliabilitetstesta Alberta Context Tool (ACT) i svensk hälso- och sjukvård och beskriva ortopedsjuksköterskors skattning av kontextuella faktorer såsom ledarskap, arbetskultur, återkoppling, utvecklingsmöjligheter och forskningsanvändning, som kan påverka möjligheten att omsätta forskningsresultat i vårdarbetet. Urvalet bestod av 119 sjuksköterskor som arbetade på ortopediska vårdavdelningar på sex olika sjukhus i mellersta Sverige. ACT är ett frågeformulär framtaget utifrån de senaste årens forskning om vilka faktorer i kontexten som har betydelse för sjuksköterskors forskningsanvändning. Reliabilitetstest gjordes enligt analys med Chronbach`s Alpa och innehållsvaliditet. Resultatet visade att ACT var relevant att användas för sjuksköterskor som arbetar på ortopedisk vårdavdelning i Sverige. Reliabilitetstesten med Chronbach´s Alpa gav värden nära 0,7 för de åtta frågeområden som behandlar kontexten.Sjuksköterskorna rapporterade att det fanns brister i många av de delar av kontexten som enligt forskning visat sig ha betydelse för möjligheten att implementera evidensbaserad vård. Sjuksköterskorna trivdes med sitt arbete och kände att deras kunskaper värderades högt i vårdteamet. Resultatet visade dock att det inte fanns tillräckligt stöd från ledningen för att utveckla vården. De rapporterade att de nästan inte alls fick återkoppling i vårdarbetet. Det saknades stödfunktioner och strategier för att implementering av forskningsresultat skulle vara möjligt att implementera i vårdarbetet. Majoriteten av sjuksköterskorna såg positivt på forskningsanvändning.

Evaluation of galling resistance for some selected combinations of tool steels/stainless steel sheet materials/lubricants using pin-on-disc testing

Stainless steels are well known to be prone to cold welding and material transfer in sliding contacts and therefore difficult to cold form unless certain precautions as discussed in this paper are taken. In the present study different combinations of tool steels/stainless steels/lubricants has been evaluated with respect to their galling resistance using pin-on-disc testing. The results show that a high galling resistance is favored by a high stainless steel sheet hardness and a blasted stainless steel sheet surface topography. The effect of type of lubricant was found to be more complex. For example, the chlorinated lubricants failed to prevent metal-to-metal contact on a brushed sheet surface but succeeded on a blasted sheet surface of the same stainless steel material. This is believed to be due to a protective tribofilm which is able to form on the blasted surface, but not on the brushed surface.