Effect of salt on the level of histamine in preserved fish (Herring, Clupea harengus)

Histamine levels in batches of heavily salted (fish:salt ratio 4:1) herring (Clupea harengus) were monitored during ripening at 4°C and 25°C. The batches studied were prepared from both pre-spawning and post-spawning (spent) fish using new and used salt. Salt levels in the flesh, which reached 11 to 14% (wet weight basis) during the ripening period, were found to retard histamine formation. During normal spoilage of ice chilled fish, histamine levels had been reported to exceed 50mg/100g flesh as it approached the limit of edibility whilst, in the heavily salted fish, levels remained below 20mg/100g flesh throughout the ripening periods of 18 months for the 4°C batches and 3 months for the 25°C batches. This was the case when the samples were set up and the salt allowed penetrating the flesh at 4°C. When, however, the samples were set up and initially stored at ambient (10-15°C) temperature the histamine levels in the flesh rose above 20mg/100g before enough salt had penetrated to inhibit its generation. The gradual rise in levels which, nevertheless, occurred over the ripening periods followed significantly (5% level of significance) different trends, being greater in the batches prepared from pre-spawning than those from spent fish.

Food preference and intake pattern of Penaeus monodon (Fab.) in semi-intensive culture system

P. monodon juveniles prefer natural food than artificial feed in their initial stage of rearing. However, the percentage preference towards artificial feed increases as the days of culture/average body weight increases. Consumption of artificial feed was high during evening meal (1700h) and low during night meal (2200h). The index of intestine fullness was high (8.4±0.7) during initial stage of rearing, compared to that of final stage of rearing (4.9±0.4), probably due to low nutritional value of intake material and low water depth at initial stage. At all stage of rearing omnivorous feeding habit was established and no evidence of diet periodicity in feeding activity was observed.

Correlation between density of states distributions and the fermi level position in interfacial regions of amorphous silicon thin film transistors

This paper investigates the variation of the integrated density of states with conduction activation energy in hydrogenated amorphous silicon thin film transistors. Results are given for two different gate insulator layers, PECVD silicon oxide and thermally grown silicon dioxide. The different gate insulators produce transistors with very different initial transfer characteristics, but the variation of integrated density of states with conduction activation energy is shown to be similar.

Phone-level pronunciation scoring and assessment for interactive language learning

This paper investigates a method of automatic pronunciation scoring for use in computer-assisted language learning (CALL) systems. The method utilizes a likelihood-based `Goodness of Pronunciation' (GOP) measure which is extended to include individual thresholds for each phone based on both averaged native confidence scores and on rejection statistics provided by human judges. Further improvements are obtained by incorporating models of the subject's native language and by augmenting the recognition networks to include expected pronunciation errors. The various GOP measures are assessed using a specially recorded database of non-native speakers which has been annotated to mark phone-level pronunciation errors. Since pronunciation assessment is highly subjective, a set of four performance measures has been designed, each of them measuring different aspects of how well computer-derived phone-level scores agree with human scores. These performance measures are used to cross-validate the reference annotations and to assess the basic GOP algorithm and its refinements. The experimental results suggest that a likelihood-based pronunciation scoring metric can achieve usable performance, especially after applying the various enhancements.

A new Lagrangian-Eulerian shell-fluid coupling algorithm based on level sets

We propose a computational method for the coupled simulation of a compressible flow interacting with a thin-shell structure undergoing large deformations. An Eulerian finite volume formulation is adopted for the fluid and a Lagrangian formulation based on subdivision finite elements is adopted for the shell response. The coupling between the fluid and the solid response is achieved via a novel approach based on level sets. The basic approach furnishes a general algorithm for coupling Lagrangian shell solvers with Cartesian grid based Eulerian fluid solvers. The efficiency and robustness of the proposed approach is demonstrated with a airbag deployment simulation. It bears emphasis that in the proposed approach the solid and the fluid components as well as their coupled interaction are considered in full detail and modeled with an equivalent level of fidelity without any oversimplifying assumptions or bias towards a particular physical aspect of the problem.

Demersal fishery resources of Sri Lanka and its present level of exploitation with special reference to off-shore and deep-sea waters

Following a brief review of development of demersal fishing off Sri Lanka, the author reviews the fishing grounds of the Wadge Bank, the Pedro Bank, and the Mannar Bank. He reviews the deepwater trawling fisheries particularly in relation to the 1972 survey conducted by the 'Optimist' and also small boat trawling in coastal waters. Lastly he considers handlining for groundfish, which is principally conducted by fishermen operating traditional craft.

Pelagic fishery resources of Sri Lanka and its present level of exploitation with special reference to off-shore and deep-sea waters

Pelagic resources around Sri Lanka may be categorized into three major groups: (1) the small pelagic varieties such as the sprats, halmessa, sardines (salaya, soodaya), and herrings (hurulla). (2) the medium size pelagic species such as the mackerel (kumbala and bolla), barracuda (jeela), seer Spanish mackerel (thora), frigate mackeral (alagoduwa), mackerel tuna (atawalla) and the skipjack (balaya). (3) the large size fishes such as yellow fin tuna (kelawalla), big eye tuna, marlins (koppora and gappara), sail fish (thalapath), sharks (mora) and rays (maduwa). Production levels of exploited resources are noted, and seasonal patterns and annual in their abundance are considered. On the basis of observations and estimations of the existing fisheries, and the results of experimental fishing, figures are presented of the potential yield of those species already exploited. The development of that potential depends on the development of modern techniques of pole and line fishing, application of tuna longline and shark longline, increasing the number of units of drift nets and the introduction of a bait fishery for the longline and pole line fishery. Some features upon which the successes of any venture to exploit such resources are noted, particularly those which relate to the nature of the fishing vessels used.

Viscous layer meshes from level sets on cartesian meshes

The long term goal of our work is to enable rapid prototyping design optimization to take place on geometries of arbitrary size in a spirit of a real time computer game. In recent papers we have reported the integration of a Level Set based geometry kernel with an octree-based cut-Cartesian mesh generator, RANS flow solver and post-processing all within a single piece of software - and all implemented in parallel with commodity PC clusters as the target. This work has shown that it is possible to eliminate all serial bottlenecks from the CED Process. This paper reports further progress towards our goal; in particular we report on the generation of viscous layer meshes to bridge the body to the flow across the cut-cells. The Level Set formulation, which underpins the geometry representation, is used as a natural mechanism to allow rapid construction of conformal layer meshes. The guiding principle is to construct the mesh which most closely approximates the body but remains solvable. This apparently novel approach is described and examples given.

Effect of feeding three different formulated feeds having different protein levels on the growth of angel fish (Pterophyllum scalare) juveniles

Experiment was conducted to study the effect of dietary protein level on growth and nutrient utilization by angel fish (Pterophyllum scalare) juveniles. Fifty-four juveniles (average wt. 2-2.5 g) were equally divided in three treatments with each of three replicates. Three formulated diets with graded protein levels, T1 (35% CP), T2 (40% CP) and T3 (45% CP) were fed to juveniles for 45 days. A trend of higher weight gain %, SGR, FER and PER was found with the increased CP level in the feed. Feed intake was similar in all the groups. T3 group fed with 45% CP registered highest weight gain % (43.26 ± 2.07), SGR (0.78 ± 0.04), FER (0.29 ± 0.01), which were significantly higher (P<0.05) than the T1 and T2 groups. Protein digestibility of T2 and T3 groups was significantly higher than the T1 group. Survival was similar in all the experimental groups. Diet with 45% CP with protein energy ratio of 112.62 mg protein/K cal. is ideal for juvenile angel fish for indoor rearing.

Arsenic level in the surface wastewaters of Kolkata and its implication on sewage-fed fisheries

Arsenic pollution is a major threat in eastern India and Bangladesh. In Kolkata, sewage-fed fishery is a very popular culture. Wastewater of Kolkata city is diluted with freshwater and used in sewage-fed fish ponds. In the present study the arsenic concentration in the surface wastewater from forty-four different places of southern, eastern, western and norther parts of Kolkata was estimated. In fifteen places, the arsenic level was higher than the allowed limit (0.20 mg/l). But the arsenic level in the waters, sediment of fish culture ponds and in fish flesh of sewage-fed fisheries of Kolkata was below the maximum limit. So, till date there is no threat from arsenic pollution to the sewage-fed fisheries of Kolkata.

Using Level Sets as the basis for a scalable, parallel geometry engine and mesh generation system

The background to this review paper is research we have performed over recent years aimed at developing a simulation system capable of handling large scale, real world applications implemented in an end-to-end parallel, scalable manner. The particular focus of this paper is the use of a Level Set solid modeling geometry kernel within this parallel framework to enable automated design optimization without topological restrictions and on geometries of arbitrary complexity. Also described is another interesting application of Level Sets: their use in guiding the export of a body-conformal mesh from our basic cut-Cartesian background octree - mesh - this permits third party flow solvers to be deployed. As a practical demonstrations meshes of guaranteed quality are generated and flow-solved for a B747 in full landing configuration and an automated optimization is performed on a cooled turbine tip geometry. Copyright © 2009 by W.N.Dawes.

The effect of boundary layer trips on intake separation in crosswinds

The flow typical of that occurring over the windward lip of an aero engine intake operating in a crosswind has been reproduced on a 2D lip. The uncontrolled boundary layer undergoes a laminar separation at the leading edge of the lip. It has been shown that a minimum size of boundary layer trip, positioned upstream of the separation location, is required to enable the flow to remain attached around the leading edge. A turbulent separation then occurs in the diffuser. Larger diameter trips promote earlier diffuser separation. Copyright © 2008 by the American Institute of Aeronautics and Astronautics, Inc.