976 resultados para electronic communication


Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work, we investigate the intrinsic limits of subthreshold slope in a dual gated bilayer graphene transistor using a coupled self-consistent Poisson-bandstructure solver. We benchmark the solver by matching the bias dependent band gap results obtained from the solver against published experimental data. We show that the intrinsic bias dependence of the electronic structure and the self-consistent electrostatics limit the subthreshold slope obtained in such a transistor well above the Boltzmann limit of 60 mV/decade at room temperature, but much below the results experimentally shown till date, indicating room for technological improvement of bilayer graphene.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

We report the synthesis and characterisation of new examples of meso-hydroxynickel(II) porphyrins with 5,15-diphenyl and 10-phenyl-5,15-diphenyl/diaryl substitu- tion. The OH group was introduced by using carbonate or hydroxide as nucleophile by using palladium/phosphine cat- alysis. The NiPor OHs exist in solution in equilibrium with the corresponding oxy radicals NiPor OC. The 15-phenyl group stabilises the radicals, so that the 1H NMR spectra of {NiPor OH} are extremely broad due to chemical exchange with the paramagnetic species. The radical concentration for the diphenylporphyrin analogue is only 1%, and its NMR line-broadening was able to be studied by variable-tempera- ture NMR spectroscopy. The EPR signals of NiPor OC are con- sistent with somewhat delocalised porphyrinyloxy radicals, and the spin distributions calculated by using density func- tional theory match the EPR and NMR spectroscopic obser- vations. Nickel(II) meso-hydroxy-10,20-diphenylporphyrin was oxidatively coupled to a dioxo-terminated porphodimethene dyad, the strongly red-shifted electronic spectrum of which was successfully modelled by using time-dependent DFT calculations.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

We share our experience in planning, designing and deploying a wireless sensor network of one square kilometre area. Environmental data such as soil moisture, temperature, barometric pressure, and relative humidity are collected in this area situated in the semi-arid region of Karnataka, India. It is a hope that information derived from this data will benefit the marginal farmer towards improving his farming practices. Soon after establishing the need for such a project, we begin by showing the big picture of such a data gathering network, the software architecture we have used, the range measurements needed for determining the sensor density, and the packaging issues that seem to play a crucial role in field deployments. Our field deployment experiences include designing with intermittent grid power, enhancing software tools to aid quicker and effective deployment, and flash memory corruption. The first results on data gathering look encouraging.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This is a qualitative and multimethodological comparative study, which consists of two main parts: examining the development of new media and analysing and comparing the new media strategies of the three companies studied (Alma Media, Sanoma and the Finnish Broadcasting Company Yleisradio). The study includes the first large-scale review in Finnish of the development of new media, paying attention to the birth of the Internet as well as to mobile media, web TV and any other element of new media. It also concentrates on the function of electronic distribution channels before the age of the Internet, e.g. cable text and videotext. Answers about how the three traditional Finnish media houses began spreading their content to the Internet and wireless applications in 1994–2004 are also given. In researching the new media strategies the study pays special attention to the attitudes that the three media companies adopted towards the Internet and other forms of new media in their strategies during the years in question. By analysing and comparing, e.g., the companies’ strategies and their investments, the study ascertains whether the companies had a joint functional model in adopting new media or acted totally on their own without taking too much notice of the media field overall. The study makes extensive use of previously published material. The researcher has also interviewed almost twenty people who were involved in getting the companies’ new media functions under way. The methods for the interviews were dialogue and snowball sampling. The researcher has created a classification in which he divides the business strategies into four different categories: active strategy, careful strategy, permissive strategy, and passive strategy. In comparing and analysing the companies the researcher has used the classification devised by Allan Afuah & Christopher L. Tucci. The seven element classification consists of dominant managerial logic, competency trap, fear of cannibalisation and loss of revenue, channel conflict, political power, co-opetitor power and emotional attachment. In analysing the company strategies the researcher has also noted the classifications of convergence made by Everette E. Dennis and Graham Murdock as well as the aspects formulated by Sylvia Chan-Olmsted and Louisa Ha concerning the success of the companies in adopting the Internet into their functions. Based on all these classifications and by further developing them the researcher analyses and compares the success of the new media strategies of the three Finnish companies. The outcome of the study is a conclusion as to what kind of strategies the companies have carried out their new media functions and how they have succeeded in it.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Theoretical studies using density functional theory are carried out to understand the electronic structure and bonding and electronic properties of elemental beta-rhombohedral boron. The calculated band structure of ideal beta-rhombohedral boron (B-105) shows valence electron deficiency and depicts metallic behavior. This is in contrast to the experimental result that it is a semiconductor. To understand this ambiguity we discuss the electronic structure and bonding of this allotrope with cluster fragment approach using our recently proposed mno rule. This helps us to comprehend in greater detail the structure of B-105 and materials which are closely related to beta-rhombohedral boron. The molecular structures B12H12-2, B28H21+1, BeB27H21, LiB27H21-1, CB27H21+2, B57H36+3, Be3B54H36, and Li2CB54H36, and corresponding solids Li8Be3B102 and Li10CB102 are arrived at using these ideas and studied using first principles density functional theory calculations.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The stability of scheduled multiaccess communication with random coding and independent decoding of messages is investigated. The number of messages that may be scheduled for simultaneous transmission is limited to a given maximum value, and the channels from transmitters to receiver are quasistatic, flat, and have independent fades. Requests for message transmissions are assumed to arrive according to an i.i.d. arrival process. Then, we show the following: (1) in the limit of large message alphabet size, the stability region has an interference limited information-theoretic capacity interpretation, (2) state-independent scheduling policies achieve this asymptotic stability region, and (3) in the asymptotic limit corresponding to immediate access, the stability region for non-idling scheduling policies is shown to be identical irrespective of received signal powers.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The problem of admission control of packets in communication networks is studied in the continuous time queueing framework under different classes of service and delayed information feedback. We develop and use a variant of a simulation based two timescale simultaneous perturbation stochastic approximation (SPSA) algorithm for finding an optimal feedback policy within the class of threshold type policies. Even though SPSA has originally been designed for continuous parameter optimization, its variant for the discrete parameter case is seen to work well. We give a proof of the hypothesis needed to show convergence of the algorithm on our setting along with a sketch of the convergence analysis. Extensive numerical experiments with the algorithm are illustrated for different parameter specifications. In particular, we study the effect of feedback delays on the system performance.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The flow of a liquid on single-walled carbon nanotube bundles induces an electrical signal (voltage/current) in the sample along the direction of the flow. The electrical response is found to be logarithmic in the flow speed over a wide range. The magnitude of the flow induced electrical signal generated depends sensitively on the ionic conductivity and the polar nature of the liquid, and electrical biasing of the nanotubes can control its direction. Our measurements suggest that the dominant mechanism responsible for this highly sub-linear response should involve a direct forcing of the free charge carriers in the nanotubes by the fluctuating Coulombic field of the liquid flowing past it.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A large part of today's multi-core chips is interconnect. Increasing communication complexity has made essential new strategies for interconnects, such as Network on Chip. Power dissipation in interconnects has become a substantial part of the total power dissipation. Techniques to reduce interconnect power have thus become a necessity. In this paper, we present a design methodology that gives values of bus width for interconnect links, frequency of operation for routers, in Network on Chip scenario that satisfy required throughput and dissipate minimal switching power. We develop closed form analytical expressions for the power dissipation, with bus width and frequency as variables and then use Lagrange multiplier method to arrive at the optimal values. We present a 4 port router in 90 nm technology library as case study. The results obtained from analysis are discussed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This report derives from the EU funded research project “Key Factors Influencing Economic Relationships and Communication in European Food Chains” (FOODCOMM). The research consortium consisted of the following organisations: University of Bonn (UNI BONN), Department of Agricultural and Food Marketing Research (overall project co-ordination); Institute of Agricultural Development in Central and Eastern Europe (IAMO), Department for Agricultural Markets, Marketing and World Agricultural Trade, Halle (Saale), Germany; University of Helsinki, Ruralia Institute Seinäjoki Unit, Finland; Scottish Agricultural College (SAC), Food Marketing Research Team - Land Economy Research Group, Edinburgh and Aberdeen; Ashtown Food Research Centre (AFRC), Teagasc, Food Marketing Unit, Dublin; Institute of Agricultural & Food Economics (IAFE), Department of Market Analysis and Food Processing, Warsaw and Government of Aragon, Center for Agro-Food Research and Technology (CITA), Zaragoza, Spain. The aim of the FOODCOMM project was to examine the role (prevalence, necessity and significance) of economic relationships in selected European food chains and to identify the economic, social and cultural factors which influence co-ordination within these chains. The research project considered meat and cereal commodities in six different European countries (Finland, Germany, Ireland, Poland, Spain, UK/Scotland) and was commissioned against a background of changing European food markets. The research project as a whole consisted of seven different work packages. This report presents the results of qualitative research conducted for work package 5 (WP5) in the pig meat and rye bread chains in Finland. Ruralia Institute would like to give special thanks for all the individuals and companies that kindly gave up their time to take part in the study. Their input has been invaluable to the project. The contribution of research assistant Sanna-Helena Rantala was significant in the data gathering. FOODCOMM project was coordinated by the University of Bonn, Department of Agricultural and Food Market Research. Special thanks especially to Professor Monika Hartmann for acting as the project leader of FOODCOMM.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this report is to discuss the role of the relationship type and communication in two Finnish food chains, namely the pig meat-to-sausage (pig meat chain) and the cereal-to-rye bread (rye chain) chains. Furthermore, the objective is to examine those factors influencing the choice of a relationship type and the sustainability of a business relationship. Altogether 1808 questionnaires were sent to producers, processors and retailers operating in these two chains of which 224 usable questionnaires were returned (the response rate being 12.4%). The great majority of the respondents (98.7%) were small businesses employing less than 50 people. Almost 70 per cent of the respondents were farmers. In both chains, formal contracts were stated to be the most important relationship type used with business partners. Although for many businesses written contracts are a common business practice, the essential role of the contracts was the security they provide regarding the demand/supply and quality issues. Relative to the choice of the relationship types, the main difference between the two chains emerged especially with the prevalence of spot markets and financial participation arrangements. The usage of spot markets was significantly more common in the rye chain when compared to the pig meat chain, while, on the other hand, financial participation arrangements were much more common among the businesses in the pig meat chain than in the rye chain. Furthermore, the analysis showed that most of the businesses in the pig meat chain claimed not to be free to choose the relationship type they use. Especially membership in a co-operative and practices of a business partner were mentioned as the reasons limiting this freedom of choice. The main business relations in both chains were described as having a long-term orientation and being based on formal written contracts. Typical for the main business relationships was also that they are not based on the existence of the key persons only; the relationship would remain even if the key people left the business. The quality of these relationships was satisfactory in both chains and across all the stakeholder groups, though the downstream processors and the retailers had a slightly more positive view on their main business partners than the farmers and the upstream processors. The businesses operating in the pig meat chain seemed also to be more dependent on their main business relations when compared to the businesses in the rye chain. Although the communication means were rather similar in both chains (the phone being the most important), there was some variation between the chains concerning the communication frequency necessary to maintain the relationship with the main business partner. In short, the businesses in the pig meat chain seemed to appreciate more frequent communication with their main business partners when compared to the businesses in the rye chain. Personal meetings with the main business partners were quite rare in both chains. All the respondent groups were, however, fairly satisfied with the communication frequency and information quality between them and the main business partner. The business cultures could be argued to be rather hegemonic among the businesses both in the pig meat and rye chains. Avoidance of uncertainty, appreciation of long-term orientation and independence were considered important factors in the business cultures. Furthermore, trust, commitment and satisfaction in business partners were thought to be essential elements of business operations in all the respondent groups. In order to investigate which factors have an effect on the choice of a relationship type, several hypotheses were tested by using binary and multinomial logit analyses. According to these analyses it could be argued that avoidance of uncertainty and risk has a certain effect on the relationship type chosen, i.e. the willingness to avoid uncertainty increases the probability to choose stable relationships, like repeated market transactions and formal written contracts, but not necessary those, which require high financial commitment (like financial participation arrangements). The probability of engaging in financial participation arrangements seemed to increase with long-term orientation. The hypotheses concerning the sustainability of the economic relations were tested by using structural equation model (SEM). In the model, five variables were found to have a positive and statistically significant impact on the sustainable economic relationship construct. Ordered relative to their importance, those factors are: (i) communication quality, (ii) personal bonds, (iii) equal power distribution, (iv) local embeddedness and (v) competition.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Spectrophotometric and potentiometric investigations have been carried out on copper-diethanolamine system. Job plots at 900, 900 and 580 mμ have indicated the formation of CuD++, CuD2++ and CuD3++. The n- pA curves obtained indicate the formation of CuD++, CuD2++, CuD3++, CuDOH+, CuD2OH+ and CuD3OH+. The n- pA curves have been analyzed to obtain the stability constants of these complexes. Absorption curves of pure complexes have been computed by a graphical method. Gaussian analysis of the absorption curves of pure and hydroxy complexes show the presence of a second band, indicating that the structure is that of a distorted octahedron.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Electronic document management (EDM) technology has the potential to enhance the information management in construction projects considerably, without radical changes to current practice. Over the past fifteen years this topic has been overshadowed by building product modelling in the construction IT research world, but at present EDM is quickly being introduced in practice, in particular in bigger projects. Often this is done in the form of third party services available over the World Wide Web. In the paper, a typology of research questions and methods is presented, which can be used to position the individual research efforts which are surveyed in the paper. Questions dealt with include: What features should EMD systems have? How much are they used? Are there benefits from use and how should these be measured? What are the barriers to wide-spread adoption? Which technical questions need to be solved? Is there scope for standardisation? How will the market for such systems evolve?