Prediction of chlorine and THMs concentration profile in bulk drinking water distribution systems from laboratory data

Nearly all drinking water distribution systems experience a "natural" reduction of disinfection residuals. The most frequently used disinfectant is chlorine, which can decay due to reactions with organic and inorganic compounds in the water and by liquid/solids reaction with the biofilm, pipe walls and sediments. Usually levels of 0.2-0.5 mg/L of free chlorine are required at the point of consumption to maintain bacteriological safety. Higher concentrations are not desirable as they present the problems of taste and odour and increase formation of disinfection by-products. It is usually a considerable concern for the operators of drinking water distribution systems to manage chlorine residuals at the "optimum level", considering all these issues. This paper describes how the chlorine profile in a drinking water distribution system can be modelled and optimised on the basis of readily and inexpensively available laboratory data. Methods are presented for deriving the laboratory data, fitting a chlorine decay model of bulk water to the data and applying the model, in conjunction with a simplified hydraulic model, to obtain the chlorine profile in a distribution system at steady flow conditions. Two case studies are used to demonstrate the utility of the technique. Melbourne's Greenvale-Sydenham distribution system is unfiltered and uses chlorination as its only treatment. The chlorine model developed from laboratory data was applied to the whole system and the chlorine profile was shown to be accurately simulated. Biofilm was not found to critically affect chlorine decay. In the other case study, Sydney Water's Nepean system was modelled from limited hydraulic data. Chlorine decay and trihalomethane (THM) formation in raw and treated water were measured in a laboratory, and a chlorine decay and THM model was derived on the basis of these data. Simulated chlorine and THM profiles agree well with the measured values available. Various applications of this modelling approach are also briefly discussed.

Prediction of chlorine and trihalomethanes concentration profile in bulk drinking water distribution systems from laboratory data

Nearly all drinking water distribution systems experience a "natural" reduction of disinfection residuals. The most frequently used disinfectant is chlorine, which can decay due to reactions with organic and inorganic compounds in the water and by liquid/solids reaction with the biofilm, pipe walls and sediments. Usually levels of 0.2-0.5 mg/L of free chlorine are required at the point of consumption to maintain bacteriological safety. Higher concentrations are not desirable as they present the problems of taste and odour and increase formation of disinfection by-products. It is usually a considerable concern for the operators of drinking water distribution systems to manage chlorine residuals at the "optimum level", considering all these issues. This paper describes how the chlorine profile in a drinking water distribution system can be modelled and optimised on the basis of readily and inexpensively available laboratory data. Methods are presented for deriving the laboratory data, fitting a chlorine decay model of bulk water to the data and applying the model, in conjunction with a simplified hydraulic model, to obtain the chlorine profile in a distribution system at steady flow conditions. Two case studies are used to demonstrate the utility of the technique. Melbourne's Greenvale-Sydenham distribution system is unfiltered and uses chlorination as its only treatment. The chlorine model developed from laboratory data was applied to the whole system and the chlorine profile was shown to be accurately simulated. Biofilm was not found to critically affect chlorine decay. In the other case study, Sydney Water's Nepean system was modelled from limited hydraulic data. Chlorine decay and trihalomethane (THM) formation in raw and treated water were measured in a laboratory, and a chlorine decay and THM model was derived on the basis of these data. Simulated chlorine and THM profiles agree well with the measured values available. Various applications of this modelling approach are also briefly discussed.

The effects of testing procedure on critical fall height determination for third-generation synthetic turf

Test procedures and their accuracy in determining critical fall height (CFH) on sporting grounds are paramount to player safety. The procedure currently adopted for synthetic turf in Australian football [1] consists of four consecutive drops at various drop heights at three test locations on the sample. The quantity and packing of the infill in third-generation turf and the pooling effect of the rubber particles with consecutive drops suggests that the current standard protocol may need re-assessment. Therefore, the purpose of this pilot study was to investigate whether current methods of testing for CFH are appropriate for third-generation synthetic turf or whether an alternative or adapted method needs to be developed. CFH was measured, using a HISUN Uniaxe-II Impact Tester, on 12 combinations of synthetic turf samples (four different products with three shock pad options). Three conditions were investigated on each sample; the existing protocol; an alternative 12 single-drop protocol and four single drops from the CFH determined from the existing protocol. A significant difference was found for both absolute and percentage difference between the existing and 12 single-drop protocol, with p = 0.001 and t = 4.33 and p < 0.001 and t = 6.03, respectively. There was also a significant difference between the CFH reached with and without a shock pad for both the existing protocol and the 12 single-drop protocol. The results of this pilot study demonstrate that differences do occur with alterations to the existing protocol and highlight the need for a more detailed characterisation of testing methods on third-generation synthetic turf and the response of surfaces to them.

Profile of position movement demands in elite junior Australian rules footballers

This study investigated the positional movement patterns in elite junior Australian Football (AF). Thirty players (17.1 ± 0.9 years) participating in this study were tracked over seven home games of the regular 2006 Victorian junior (Under 18) league season. Using lapsed-time video analysis, each position for an entire match was videotaped on three separate occasions over the course of the season. Data analysed included the number of individual efforts, duration and frequency of efforts; distance and percentage time for the classifications of standing, walking jogging, running and sprinting. Results showed that the midfield position travelled the greatest distance (4173 ± 238 m per quarter; p < 0.05; ES = .94) whilst the full forward/full back travelled the least (2605 ± 348 m per quarter, p < 0.05, ES = 1.21). For all positions, walking or jogging accounted for the greatest number of efforts (45-55%), conversely running and sprinting accounted for 5-13% of match efforts. The majority of efforts across all classifications were between 0-3.99 s. The data from this study provides further evidence that AF is an intermittent sport characterised by high intensity movements separated by low intensity movements at a ratio of one high intensity effort every 12-40 s. However, careful interpretation of the data is required when training junior AF players for specific positions, given the specific group studied.

Influence of the blink interval on tear meniscus height in soft contact lens and nonlens wearers

Purpose: Tear meniscus height (TMH) is an indirect measurement of tear film volume. This study investigated the temporal changes in the TMH during the blink interval in the morning (8–9 am) and at the end of the day (5–6 pm) in both soft contact lens (CL) and nonlens wearers (NLW).

Methods: Fifty participants (25 CL; 25 NLW) were evaluated for their subjective symptoms, TMH, noninvasive break up time, and bulbar hyperemia at the am and pm visits on the same day. The TMH was measured at set intervals between 2 and 15 sec during the blink interval, using an optical coherence tomographer.

Results: The NLW group revealed no changes in a variety of symptoms during the day, whereas the CL group reported an increase in dryness (P=0.03) and grittiness (P=0.02) over the day. For both groups, the TMH and calculated tear meniscus volume revealed lower values immediately after the blink and increased progressively afterwards, mainly due to reflex tearing. The am tear meniscus volume values tended to be higher than the pm values for both groups, but this was not significant (NLW P=0.13; CL P=0.82). Noninvasive break up time deteriorated during the day for both groups but was only significant for the CL group (P=0.002), whereas bulbar hyperemia revealed no statistically significant change for either group.

Conclusions: Reflex tearing may play a substantial role in the TMH differences observed over the blink interval. Standardization of the time when a TMH measurement is performed will be valuable in comparing tear film clinical studies.

Sesamin modulation of lipid class and fatty acid profile in early juvenile teleost, Lates calcarifer, fed different dietary oils

Sesamin, a major sesame seed lignan, has diverse biological functions including the modulation of molecular actions in lipid metabolic pathways and reducing cholesterol levels. Vertebrates have different capacities to biosynthesize long-chain PUFA from dietary precursors and sesamin can enhance the biosynthesis of ALA to EPA and DHA in marine teleost. Early juvenile barramundi, Lates calcarifer, were fed for two weeks on diets rich in ALA or SDA derived from linseed or Echium plantagineum, respectively. Both diets contained phytosterols and less cholesterol compared with a standard fish oil-based diet. The growth rates were reduced in the animals receiving sesamin regardless of the dietary oil. However, the relative levels of n-3 LC-PUFA in total lipid, but not the phospholipid, increased in the whole body by up to 25% in animals fed on sesamin with ALA or SDA. Sesamin reduced the relative levels of triacylglycerols and increased polar lipid, and did not affect the relative composition of phospholipid subclasses or sterols. Sesamin is a potent modulator for LC-PUFA biosynthesis in animals, but probably will have more effective impact at advanced ages. By modulating certain lipid metabolic pathways, sesamin has probably disrupted the body growth and development of organs and tissues in early juvenile barramundi.

Cohort profile : The resilience for eating and activity despite inequality (READI) study

The Resilience for Eating and Activity Despite Inequality (READI) cohort was established to address the following two key aims: to investigate the pathways (personal, social and structural) by which socio-economic disadvantage influences lifestyle choices associated with obesity risk (physical inactivity, poor dietary choices) and to explore mechanisms underlying ‘resilience’ to obesity risk in socio-economically disadvantaged women and children. A total of 4349 women aged 18–46 years and 685 children aged 5–12 years were recruited from 80 socio-economically disadvantaged urban and rural neighbourhoods of Victoria, Australia, and provided baseline (T1: 2007–08) measures of adiposity, physical activity, sedentary and dietary behaviours; socio-economic and demographic factors; and psychological, social and perceived environmental factors that might impact on obesity risk. Audits of the 80 neighbourhoods were undertaken at baseline to provide objective neighbourhood environmental data. Three-year follow-up data (2010–11) have recently been collected from 1912 women and 382 children. Investigators welcome enquiries regarding data access and collaboration.

Profile information and business outcomes of providers in electronic service marketplaces : an empirical investigation

Electronic service marketplaces (ESMs) have become major exchange platforms for the online outsourcing of different services – especially software development – to providers. Provider profiles on ESMs encompass extensive information regarding the activities and transactions of providers and they are a main source of information for customers. Such profile information significantly facilitates the relationship development between customers and providers. The existing literature has focused on the impact of the ratings of providers, but so far has not investigated the impact of the other available profile information. Building on the integrated information response model, this study investigates how information presented by providers as well as information provided by the ESM influences the business outcomes of the providers. Based on data collected from one of the major ESMs, we found that profile information indeed has a significant impact on the business outcomes of providers.

Passing the banner : the Australian media’s coverage of high profile court cases about women

An examination of the historical narrative patterns of gendered justice in Australian media representations of high profile court cases. Includes discussion of the Chamberlain Case, the Dianne Brimble cruise ship death case, and the Jill Meagher rape and murder