The effects of testing procedure on critical fall height determination for third-generation synthetic turf

Test procedures and their accuracy in determining critical fall height (CFH) on sporting grounds are paramount to player safety. The procedure currently adopted for synthetic turf in Australian football [1] consists of four consecutive drops at various drop heights at three test locations on the sample. The quantity and packing of the infill in third-generation turf and the pooling effect of the rubber particles with consecutive drops suggests that the current standard protocol may need re-assessment. Therefore, the purpose of this pilot study was to investigate whether current methods of testing for CFH are appropriate for third-generation synthetic turf or whether an alternative or adapted method needs to be developed. CFH was measured, using a HISUN Uniaxe-II Impact Tester, on 12 combinations of synthetic turf samples (four different products with three shock pad options). Three conditions were investigated on each sample; the existing protocol; an alternative 12 single-drop protocol and four single drops from the CFH determined from the existing protocol. A significant difference was found for both absolute and percentage difference between the existing and 12 single-drop protocol, with p = 0.001 and t = 4.33 and p < 0.001 and t = 6.03, respectively. There was also a significant difference between the CFH reached with and without a shock pad for both the existing protocol and the 12 single-drop protocol. The results of this pilot study demonstrate that differences do occur with alterations to the existing protocol and highlight the need for a more detailed characterisation of testing methods on third-generation synthetic turf and the response of surfaces to them. <br />