Comparative cost-effectiveness analyses of cardiovascular magnetic resonance and coronary angiography combined with fractional flow reserve for the diagnosis of coronary artery disease.

BACKGROUND: According to recent guidelines, patients with coronary artery disease (CAD) should undergo revascularization if significant myocardial ischemia is present. Both, cardiovascular magnetic resonance (CMR) and fractional flow reserve (FFR) allow for a reliable ischemia assessment and in combination with anatomical information provided by invasive coronary angiography (CXA), such a work-up sets the basis for a decision to revascularize or not. The cost-effectiveness ratio of these two strategies is compared. METHODS: Strategy 1) CMR to assess ischemia followed by CXA in ischemia-positive patients (CMR + CXA), Strategy 2) CXA followed by FFR in angiographically positive stenoses (CXA + FFR). The costs, evaluated from the third party payer perspective in Switzerland, Germany, the United Kingdom (UK), and the United States (US), included public prices of the different outpatient procedures and costs induced by procedural complications and by diagnostic errors. The effectiveness criterion was the correct identification of hemodynamically significant coronary lesion(s) (= significant CAD) complemented by full anatomical information. Test performances were derived from the published literature. Cost-effectiveness ratios for both strategies were compared for hypothetical cohorts with different pretest likelihood of significant CAD. RESULTS: CMR + CXA and CXA + FFR were equally cost-effective at a pretest likelihood of CAD of 62% in Switzerland, 65% in Germany, 83% in the UK, and 82% in the US with costs of CHF 5'794, euro 1'517, £ 2'680, and $ 2'179 per patient correctly diagnosed. Below these thresholds, CMR + CXA showed lower costs per patient correctly diagnosed than CXA + FFR. CONCLUSIONS: The CMR + CXA strategy is more cost-effective than CXA + FFR below a CAD prevalence of 62%, 65%, 83%, and 82% for the Swiss, the German, the UK, and the US health care systems, respectively. These findings may help to optimize resource utilization in the diagnosis of CAD.

Online estimation of respiratory mechanics in non-invasive pressure support ventilation: a bench model study.

An online algorithm for determining respiratory mechanics in patients using non-invasive ventilation (NIV) in pressure support mode was developed and embedded in a ventilator system. Based on multiple linear regression (MLR) of respiratory data, the algorithm was tested on a patient bench model under conditions with and without leak and simulating a variety of mechanics. Bland-Altman analysis indicates reliable measures of compliance across the clinical range of interest (± 11-18% limits of agreement). Resistance measures showed large quantitative errors (30-50%), however, it was still possible to qualitatively distinguish between normal and obstructive resistances. This outcome provides clinically significant information for ventilator titration and patient management.

Estimation of dynamic latent variable models using simulated nonparametric moments

Abstract. Given a model that can be simulated, conditional moments at a trial parameter value can be calculated with high accuracy by applying kernel smoothing methods to a long simulation. With such conditional moments in hand, standard method of moments techniques can be used to estimate the parameter. Because conditional moments are calculated using kernel smoothing rather than simple averaging, it is not necessary that the model be simulable subject to the conditioning information that is used to define the moment conditions. For this reason, the proposed estimator is applicable to general dynamic latent variable models. It is shown that as the number of simulations diverges, the estimator is consistent and a higher-order expansion reveals the stochastic difference between the infeasible GMM estimator based on the same moment conditions and the simulated version. In particular, we show how to adjust standard errors to account for the simulations. Monte Carlo results show how the estimator may be applied to a range of dynamic latent variable (DLV) models, and that it performs well in comparison to several other estimators that have been proposed for DLV models.

Evaluating the influence of spatial uncertainty in locality points for species distributional modeling

1. Species distribution modelling is used increasingly in both applied and theoretical research to predict how species are distributed and to understand attributes of species' environmental requirements. In species distribution modelling, various statistical methods are used that combine species occurrence data with environmental spatial data layers to predict the suitability of any site for that species. While the number of data sharing initiatives involving species' occurrences in the scientific community has increased dramatically over the past few years, various data quality and methodological concerns related to using these data for species distribution modelling have not been addressed adequately. 2. We evaluated how uncertainty in georeferences and associated locational error in occurrences influence species distribution modelling using two treatments: (1) a control treatment where models were calibrated with original, accurate data and (2) an error treatment where data were first degraded spatially to simulate locational error. To incorporate error into the coordinates, we moved each coordinate with a random number drawn from the normal distribution with a mean of zero and a standard deviation of 5 km. We evaluated the influence of error on the performance of 10 commonly used distributional modelling techniques applied to 40 species in four distinct geographical regions. 3. Locational error in occurrences reduced model performance in three of these regions; relatively accurate predictions of species distributions were possible for most species, even with degraded occurrences. Two species distribution modelling techniques, boosted regression trees and maximum entropy, were the best performing models in the face of locational errors. The results obtained with boosted regression trees were only slightly degraded by errors in location, and the results obtained with the maximum entropy approach were not affected by such errors. 4. Synthesis and applications. To use the vast array of occurrence data that exists currently for research and management relating to the geographical ranges of species, modellers need to know the influence of locational error on model quality and whether some modelling techniques are particularly robust to error. We show that certain modelling techniques are particularly robust to a moderate level of locational error and that useful predictions of species distributions can be made even when occurrence data include some error.

Type I hyperprolinemia: genotype/phenotype correlations.

Type I hyperprolinemia (HPI) is an autosomal recessive disorder associated with cognitive and psychiatric troubles, caused by alterations of the Proline Dehydrogenase gene (PRODH) at 22q11. HPI results from PRODH deletion and/or missense mutations reducing proline oxidase (POX) activity. The goals of this study were first to measure in controls the frequency of PRODH variations described in HPI patients, second to assess the functional effect of PRODH mutations on POX activity, and finally to establish genotype/enzymatic activity correlations in a new series of HPI patients. Eight of 14 variants occurred at polymorphic frequency in 114 controls. POX activity was determined for six novel mutations and two haplotypes. The c.1331G>A, p.G444D allele has a drastic effect, whereas the c.23C>T, p.P8L allele and the c.[56C>A; 172G>A], p.[Q19P; A58T] haplotype result in a moderate decrease in activity. Among the 19 HPI patients, 10 had a predicted residual activity <50%. Eight out of nine subjects with a predicted residual activity > or = 50% bore at least one c.824C>A, p.T275N allele, which has no detrimental effect on activity but whose frequency in controls is only 3%. Our results suggest that PRODH mutations lead to a decreased POX activity or affect other biological parameters causing hyperprolinemia.

Soporte geoespacial para modelos de distribución de especies (I): generalización del mapa de vegetación del Montseny apoyada en información de imágenes de satélite

Los mapas de vegetación son a menudo utilizados como proxis de una estratificación de hábitats para generar distribuciones geográficas contínuas de organismos a partir de datos discretos mediante modelos multi-variantes. Sin embargo, los mapas de vegetación suelen ser poco apropiados para ser directamente aplicados a este fin, pues sus categorías no se concibieron con la intención de corresponder a tipos de hábitat. En este artículo presentamos y aplicamos el método de Agrupamiento por Doble Criterio para generalizar un mapa de vegetación extraordinariamente detallado (350 clases) del Parque Natural del Montseny (Cataluña) en categorías que mantienen la coherencia tanto desde el punto de vista estructural (a través de una matriz de disimilaridad espectral calculada mediante una imágen del satélite SPOT-5) como en términos de vegetación (gracias a una matriz de disimilaridad calculada mediante propiedades de vegetación deducidas de la leyenda jerárquica del mapa). El método simplifica de 114 a 18 clases el 67% del área de estudio. Añadiendo otras agregaciones más triviales basadas exclusivamente en criterios de cubierta de suelo, el 73% del área de estudio pasa de 167 a 25 categorías. Como valor añadido, el método identifica el 10% de los polígonos originales como anómalos (a partir de comparar las propiedades espectrales de cada polígono con el resto de los de su clases), lo que implica cambios en la cubierta entre las fechas del soporte utilizado para generar el mapa original y la imagen de satélite, o errores en la producción de éste.

Timing of Palaeozoic magmatism in the Maggia and Sambuco nappes and paleogeographic implications (Central Lepontine Alps)

Magmatic rocks from the pre-Mesozoic basements of the Sambuco and Maggia nappes have been dated by U-Pb zircon ages with the LA-ICPMS technique. Several magmatic events have been identified in the Sambuco nappe. The mafic banded calc-alkaline suite of Scheggia is dated at 540 Ma, an age comparable to that of mafic rocks in the Austroalpine Silvretta nappe. The Sasso Nero peraluminous augengneiss has an age of 480-470 Ma, like many other ``older orthogneisses'' in Alpine basement units. It hosts a large proportion of inherited zircons, which were dated around 630 Ma, a Panafrican age indicating the Gondwanan affiliation of the Sambuco basement. The calc-alkaline Matorello pluton yielded ages around 300 Ma, similar to numerous Late Carboniferous intrusions in other basement units of the Lower Penninic (Monte Leone, Antigorio, Verampio) and Helvetic domains (Gotthard and other External Crystalline Massifs). Associated lamprophyric dykes are slightly younger (300-290 Ma), like similar dykes sampled in gneiss blocks included in the sedimentary cover of the underlying Antigorio nappe (290-285 Ma). The Cocco granodiorite and Ruscada leucogranite, both intruding the basement of the neighbouring Maggia nappe, yielded ages of ca. 300-310 Ma, identical within errors to the age of the Matorello pluton. They are significantly older than former age determinations. This age coincidence, coupled with remarkable petrologic similarities between the Cocco and Matorello granodiorites, strongly suggests paleogeographic proximity of the Sambuco and Maggia nappes in Late Carboniferous times. In recent publications these two nappes have been interpreted as belonging to distinct Mesozoic paleogeographic domains: ``European'' for Sambuco and ``Brian double dagger onnais'' for Maggia, separated by the ``Valais'' oceanic basin. In this case, the similarity of the Matorello and Cocco intrusions would demonstrate the absence of any significant transcurrent movement between these two continental domains. Alternatively, according to a more traditional view, Sambuco and Maggia might belong to a single large Alpine tectonic unit.

DETERMINATION OF CELL-SPECIFIC NEUROTOXICITY OF MALONATE, METHYLMALONATE AND PROPIONATE IN A 3D RAT BRAIN CELL AGGREGATE SYSTEM

Malonate, methylmalonate and propionate are potentially neurotoxic metabolites in branched-chain organic acidurias. Their effects were tested on cultured 3D rat brain cell aggregates, using dosages of 0.1, 1.0 and 10.0 mM with a short but intense (twice a day over 3 days) and a longer but less intense treatment (every 3 rdday over 9 days). CNS cell-specific immunohistochemical stainings allowed the follow-up of neurons (axons, phosphorylated medium-weight neurofilament), astrocytes (glial fibrillary acidic protein) and oligodendrocytes (myelin basic protein). Methylmalonate and malonate were quantified by tandem mass spectrometry. Tandem mass spectrometry analysis of harvested brain cell aggregates revealed clear intracellular accumulation of methylmalonate and malonate. In immunohistochemical stainings oligodendrocytes appeared the most affected brain cells. The MBP signal disappeared already at 0.1 mM treatment with each metabolite. Mature astrocytes were not affected by propionate, while immature astrocytes on intense treatment with propionate developed cell swelling. 1 mM methylmalonate induced cell swelling of both immature and mature astrocytes , while 1 mM malonate only affected mature astrocytes. Neurons were not affected by methylmalonate, but 10.0 mM malonate on less intense treatment and 0.1, 1.0 and 10.0 mM propionate on intense treatment affected axonal growth. Our study shows significant uptake and deleterious effects of these metabolites on brain cells, principally on astrocytes and oligodendrocytes. This may be explained by the absence of the pathway in glial cells, which thus are not able to degrade these metabolites. Further studies are ongoing to elucidate the underlying mechanisms of the observed neurotoxic effects.

Mejorando la robustez de aplicaciones frente a fallos transitorios

Computer chips implementation technologies evolving to obtain more performance are increasing the probability of transient faults. As this probability grows and on-chip solutions are expensive or tend to degrade processor performance, the efforts to deal with these transient faults in higher levels (such as the operating system or even at the application level) are increasing. Mostly, these efforts are trying to avoid silent data corruptions using hardware, software and hybrid based techniques to add redundancy to detect the errors generated by the transient faults. This work presents our proposal to improve the robustness of applications with source code based transformation adding redundancy. Also, our proposal takes account of the tradeoff between the improved robustness and the overhead generated by the added redundancy.

On problems of calculating energy expenditure and substrate utilization from respiratory exchange data.

Indirect calorimetry based on respiratory exchange measurement has been successfully used from the beginning of the century to obtain an estimate of heat production (energy expenditure) in human subjects and animals. The errors inherent to this classical technique can stem from various sources: 1) model of calculation and assumptions, 2) calorimetric factors used, 3) technical factors and 4) human factors. The physiological and biochemical factors influencing the interpretation of calorimetric data include a change in the size of the bicarbonate and urea pools and the accumulation or loss (via breath, urine or sweat) of intermediary metabolites (gluconeogenesis, ketogenesis). More recently, respiratory gas exchange data have been used to estimate substrate utilization rates in various physiological and metabolic situations (fasting, post-prandial state, etc.). It should be recalled that indirect calorimetry provides an index of overall substrate disappearance rates. This is incorrectly assumed to be equivalent to substrate "oxidation" rates. Unfortunately, there is no adequate golden standard to validate whole body substrate "oxidation" rates, and this contrasts to the "validation" of heat production by indirect calorimetry, through use of direct calorimetry under strict thermal equilibrium conditions. Tracer techniques using stable (or radioactive) isotopes, represent an independent way of assessing substrate utilization rates. When carbohydrate metabolism is measured with both techniques, indirect calorimetry generally provides consistent glucose "oxidation" rates as compared to isotopic tracers, but only when certain metabolic processes (such as gluconeogenesis and lipogenesis) are minimal or / and when the respiratory quotients are not at the extreme of the physiological range. However, it is believed that the tracer techniques underestimate true glucose "oxidation" rates due to the failure to account for glycogenolysis in the tissue storing glucose, since this escapes the systemic circulation. A major advantage of isotopic techniques is that they are able to estimate (given certain assumptions) various metabolic processes (such as gluconeogenesis) in a noninvasive way. Furthermore when, in addition to the 3 macronutrients, a fourth substrate is administered (such as ethanol), isotopic quantification of substrate "oxidation" allows one to eliminate the inherent assumptions made by indirect calorimetry. In conclusion, isotopic tracers techniques and indirect calorimetry should be considered as complementary techniques, in particular since the tracer techniques require the measurement of carbon dioxide production obtained by indirect calorimetry. However, it should be kept in mind that the assessment of substrate oxidation by indirect calorimetry may involve large errors in particular over a short period of time. By indirect calorimetry, energy expenditure (heat production) is calculated with substantially less error than substrate oxidation rates.

DIFFERENTIAL EXPRESSION OF GLUTARYL-CoA DEHYDROGENASE IN ADULT RAT CNS, PERIPHERAL TISSUES AND DURING EMBRYONIC DEVELOPMENT

Glutaryl-CoA dehydrogenase (GCDH, EC 1.3.99.7) deficiency, known as glutaric acidemia type I, is one of the more common organic acidurias. To investigate the role of this pathway in different organs we studied the tissue-specific expression pattern of rat Gcdh. The open reading frame cDNA of the rat Gcdh gene was cloned from rat brain mRNA by RT-PCR, allowing the synthesis of digoxigenin-labeled in situ hybridization (ISH) riboprobes. Gcdh mRNA expression was analyzed by ISH on cryosections of adult rat brain, kidney, liver, spleen and heart muscle, as well as on E15 and E18 rat embryos. Gcdh was found expressed in the whole rat brain, almost exclusively in neurons. Gcdh was absent from astrocytes but expressed in rare oligodendrocytes. Strong Gcdh expression was found in liver and spleen, where expression appears predominant to lymphatic nodules. In kidney, the highest Gcdh expression is found in the juxtamedullar cortex (but not in glomerula), and at lower levels in medulla. Heart muscle was negative. During embryonic development, Gcdh was found well expressed in liver, intestinal mucosa and skin, as well as at lower levels in CNS. Further studies are ongoing to provide evidence on the presence of the entire pathway in CNS in order to understand the mechanisms leading to neurotoxicity in glutaric aciduria. The high expression of Gcdh in kidney may explain why certain patients with residual enzyme activity are low excretors at the urine metabolite level.

lntroducció de tècniques d'aprenentatge col·laboratiu en I'àmbit de bases de dades amb el suport de les tecnologies de la informació

Els canvi recents en els plans d’estudis de la UPC i la UOC tenen en compte el nou espai europeu d’educació superior (EEES). Una de les conseqüències directes a aquests canvis es la necessitat d'aprofitar i optimitzar el temps dedicat a les activitats d'aprenentatge que requereixen la participació activa de l’estudiant i que es realitzen de manera continuada durant el semestre. A més, I'EEES destaca la importància de les pràctiques, les relacions interpersonals i la capacitat per treballar en equip, suggerint la reducció de classes magistrals i l’augment d’activitats que fomentin tant el treball personal de l’estudiant com el cooperatiu. En l’àmbit de la docència informàtica d’assignatures de bases de dades el problema és especialment complex degut a que els enunciats de les proves no acostumen a tenir una solució única. Nosaltres hem desenvolupat una eina anomenada LEARN-SQL, l’objectiu de la qual és corregir automàticament qualsevol tipus de sentència SQL (consultes, actualitzacions, procediments emmagatzemats, disparadors, etc.) i discernir si la resposta aportada per l’estudiant és o no és correcta amb independència de la solució concreta que aquest proposi. D’aquesta manera potenciem l’autoaprenentatge i l’autoavaluació, fent possible la semi-presencialitat supervisada i facilitant l’aprenentatge individualitzat segons les necessitats de cada estudiant. Addicionalment, aquesta eina ajuda als professors a dissenyar les proves d’avaluació, permetent també la opció de revisar qualitativament les solucions aportades pels estudiants. Per últim, el sistema proporciona ajuda als estudiants per a que aprenguin dels seus propis errors, proporcionant retroalimentació de qualitat.

Projecte pilot d'innovació docent de l'assignatura Estructura de Computadors I

L'objectiu del projecte ha estat la millora de la qualitat docent de l'assignatura Estructura de Computadors I, impartida a la Facultat d'Informàtica de Barcelona (UPC) dins els estudis d'Enginyeria Informàtica, Enginyeria Tècnica en Informàtica de Sistemes i Enginyeria Tècnica en Informàtica de Gestió. S'ha treballat en quatre línies d'actuació: (i) aplicació de tècniques d'aprenentatge actiu a les classes; (ii) aplicació de tècniques d'aprenentage cooperatiu no presencials; (iii) implantació de noves TIC i adaptació de les ja emprades per tal d'habilitar mecanismes d'autoavaluació i de realimentació de la informació referent a l'avaluació; i (iv) difusió de les experiències derivades de les diferents actuacions. Referent a les dues primeres mesures s'avalua l'impacte de metodologies docents que afavoreixen l'aprenentatge actiu tant de forma presencial com no presencial, obtenint-se clares millores en el rendiment respecte a altres metodologies utilitzades anteriorment enfocades a la realització de classes del tipus magistral, en què únicament es posa a l'abast dels alumnes la documentació de l'assignatura per a què puguin treballar de forma responsable. Les noves metodologies fan especial èmfasi en el treball en grup a classe i la compartició de les experiències fora de classe a través de fòrums de participació. La mesura que ha requerit més esforç en aquest projecte és la tercera, amb el desenvolupament d'un entorn d'interfície web orientat a la correcció automàtica de programes escrits en llenguatge assemblador. Aquest entorn permet l'autoavaluació per part dels alumnes dels exercicis realitzats a l'assignatura, amb obtenció d'informació detallada sobre les errades comeses. El treball realitzat dins d'aquest projecte s'ha publicat en congressos rellevants en l'àrea docent tant a nivell estatal com internacional. El codi font de l'entorn esmentat anteriorment es posa a disposició pública a través d'un enllaç a la web.

DNA degradation in avian faecal samples and feasibility of non-invasive genetic studies applied to threatened capercaillie populations

We evaluated the feasibility of using faeces as a non-invasively collected DNA source for the genetic study of an endangered bird population (capercaillie; Tetrao urogallus). We used a multitube approach, and for our panel of 11 microsatellites genotyping reliability was estimated at 98% with five repetitions. Experiments showed that free DNases in faecal material were the major cause of DNA degradation. Our results demonstrate that using avian faeces as a source of DNA, reliable microsatellite genotyping can be obtained with a reasonable number of PCR replicates.

Desarrollo de un sistema integrado de navegación inercial: interfície IMU + FPGA

Els sistemes automatitzats que requereixen d’un control d’estabilitat o moviment es poden trobar cada cop en més àmbits. Aplicacions UAV o de posicionament global són les més comunes per aquest tipus de sistemes, degut a que necessiten d’un control de moviment molt precís. Per a dur a terme aquest procés s’utilitzen unitats de mesura inercial, que mitjançant acceleròmetres i giroscopis degudament posicionats, a més a més d’una correcció del possible error que puguin introduir aquests últims, proporcionen una acceleració i una velocitat angular de les quals es pot extreure el camí efectuat per aquestes unitats. La IMU, combinada amb un GPS i mitjançant un filtre de Kalman, proporcionen una major exactitud , a més d’un punt de partida (proporcionat per el GPS), un recorregut representable en un mapa y, en el cas de perdre la senyal GPS, poder seguir adquirint dades de la IMU. Aquestes dades poden ser recollides i processades per una FPGA, que a la vegada podem sincronitzar amb una PDA per a que l’usuari pugui veure representat el moviment del sistema. Aquest treball es centra en el funcionament de la IMU i l’adquisició de dades amb la FPGA. També introdueix el filtre de Kalman per a la correcció de l’error dels sensors.