Between Bacchus and Dionysus: European Union policies on rural development: the cases of Nemea and Basto wine regions

A actividade vitivinícola possui um conjunto diverso de características presentes no solo, território e comunidade que fazem parte do património cultural de uma determinada região. Quando a tradição se traduz num conceito como terroir que é formado por características territoriais, sociais e culturais de uma região rural, o vinho apresenta uma “assinatura” que se escreve “naturalmente” no paladar regionalmente identificado. Os vinhos da Região de Nemea, na Grécia e de Basto (Região dos Vinhos Verdes) em Portugal, estão ambos sob a proteção dos regulamentos das Denominações de Origem. No entanto, apesar de ambos serem regulados por sistemas institucionais de certificação e controlo de qualidade, afigura-se a necessidade de questionar se o património cultural e a identidade territorial específica, “impressa” em ambos os terroirs, pode ser protegida num sentido mais abrangente do que apenas origem e qualidade. Em Nemea, a discussão entre os produtores diz respeito ao estabelecimento de sub-zonas, isto é incluir na regulação PDO uma diferente categorização territorial com base no terroir. Ou seja, para além de estar presente no rótulo a designação PDO, as garrafas incluirão ainda informação certificada sobre a área específica (dentro do mesmo terroir) onde o vinho foi produzido. A acontecer resultaria em diferentes status de qualidade de acordo com as diferentes aldeias de Nemea onde as vinhas estão localizadas. O que teria possíveis impactos no valor das propriedades e no uso dos solos. Para além disso, a não participação da Cooperativa de Nemea na SON (a associação local de produtores de vinho) e como tal na discussão principal sobre as mudanças e os desafios sobre o terroir de Nemea constitui um problema no sector vitivinícola de Nemea. Em primeiro lugar estabelece uma relação de não-comunicação entre os dois mais importantes agentes desse sector – as companhias vinícolas e a Cooperativa. Em segundo lugar porque constituiu uma possibilidade real, não só para os viticultores ficarem arredados dessa discussão, como também (porque não representados pela cooperativa) ficar impossibilitado um consenso sobre as mudanças discutidas. Isto poderá criar um ‘clima’ de desconfiança levando a discussão para ‘arenas’ deslocalizadas e como tal para decisões ‘desterritorializadas’ Em Basto, há vários produtores que começaram a vender a sua produção para distribuidoras localizadas externamente à sub-região de Basto, mas dentro da Região dos Vinhos Verdes, uma vez que essas companhias tem um melhor estatuto nacional e internacional e uma melhor rede de exportações. Isto está ainda relacionado com uma competição por uma melhor rede de contactos e status mais forte, tornando as discussões sobre estratégias comuns para o desenvolvimento rural e regional de Basto mais difícil de acontecer (sobre isto a palavra impossível foi constantemente usada durante as entrevistas com os produtores de vinho). A relação predominante entre produtores é caracterizada por relações individualistas. Contudo foi observado que essas posições são ainda caracterizadas por uma desconfiança no interior da rede interprofissional local: conflitos para conseguir os mesmos potenciais clientes; comprar uvas a viticultores com melhor rácio qualidade/preço; estratégias individuais para conseguir um melhor status político na relação com a Comissão dos Vinhos Verdes. Para além disso a inexistência de uma activa intermediação institucional (autoridades municipais e a Comissão de Vinho Verde), a inexistência entre os produtores de Basto de uma associação ou mesmo a inexistência de uma cooperativa local tem levado a região de Basto a uma posição de subpromoção nas estratégias de promoção do Vinho Verde em comparação com outras sub-regiões. É também evidente pelos resultados que as mudanças no sector vitivinícolas na região de Basto têm sido estimuladas de fora da região (em resposta também às necessidades dos mercados internacionais) e raramente de dentro – mais uma vez, ‘arenas’ não localizadas e como tal decisões desterritorializadas. Nesse sentido, toda essa discussão e planeamento estratégico, terão um papel vital na preservação da identidade localizada do terroir perante os riscos de descaracterização e desterritorialização. Em suma, para ambos os casos, um dos maiores desafios parece ser como preservar o terroir vitivinícola e como tal o seu carácter e identidade local, quando a rede interprofissional em ambas as regiões se caracteriza, tanto por relações não-consensuais em Nemea como pelo modus operandi de isolamento sem comunicação em Basto. Como tal há uma necessidade de envolvimento entre os diversos agentes e as autoridades locais no sentido de uma rede localizada de governança. Assim sendo, em ambas as regiões, a existência dessa rede é essencial para prevenir os efeitos negativos na identidade do produto e na sua produção. Uma estratégia de planeamento integrado para o sector será vital para preservar essa identidade, prevenindo a sua desterritorialização através de uma restruturação do conhecimento tradicional em simultâneo com a democratização do acesso ao conhecimento das técnicas modernas de produção vitivinícola.

The effect of earlier mating and improving fertility on greenhouse gas emissions intensity of beef production in northern Australian herds

Approximately 5% of Australian national greenhouse gas (GHG) emissions are derived from the northern beef industry. Improving the reproductive performance of cows has been identified as a key target for increasing profitability, and this higher efficiency is also likely to reduce the GHG emissions intensity of beef production. The effects of strategies to increase the fertility of breeding herds and earlier joining of heifers as yearlings were studied on two properties at Longreach and Boulia in western Queensland. The beef production, GHG emissions, emissions intensity and profitability were investigated and compared with typical management in the two regions. Overall weaning rates achieved on the two properties were 79% and 74% compared with typical herd weaning rates of 58% in both regions. Herds with high reproductive performance had GHG emissions intensities (t CO2-e t–1 liveweight sold) 28% and 22% lower than the typical herds at Longreach and Boulia, with most of the benefit from higher weaning rates. Farm gross margin analysis showed that it was more profitable, by $62 000 at Longreach and $38 000 at Boulia, to utilise higher reproductive performance to increase the amount of liveweight sold with the same number of adult equivalents compared with reducing the number of adult equivalents to maintain the same level of liveweight sold and claiming a carbon credit for lower farm emissions. These gains achieved at two case study properties which had different rainfall, country types, and property sizes suggest similar improvements can be made on-farm across the Mitchell Grass Downs bioregion of northern Australia.

Scheduling of track inspection and maintenance activities in railroad networks

The U.S. railroad companies spend billions of dollars every year on railroad track maintenance in order to ensure safety and operational efficiency of their railroad networks. Besides maintenance costs, other costs such as train accident costs, train and shipment delay costs and rolling stock maintenance costs are also closely related to track maintenance activities. Optimizing the track maintenance process on the extensive railroad networks is a very complex problem with major cost implications. Currently, the decision making process for track maintenance planning is largely manual and primarily relies on the knowledge and judgment of experts. There is considerable potential to improve the process by using operations research techniques to develop solutions to the optimization problems on track maintenance. In this dissertation study, we propose a range of mathematical models and solution algorithms for three network-level scheduling problems on track maintenance: track inspection scheduling problem (TISP), production team scheduling problem (PTSP) and job-to-project clustering problem (JTPCP). TISP involves a set of inspection teams which travel over the railroad network to identify track defects. It is a large-scale routing and scheduling problem where thousands of tasks are to be scheduled subject to many difficult side constraints such as periodicity constraints and discrete working time constraints. A vehicle routing problem formulation was proposed for TISP, and a customized heuristic algorithm was developed to solve the model. The algorithm iteratively applies a constructive heuristic and a local search algorithm in an incremental scheduling horizon framework. The proposed model and algorithm have been adopted by a Class I railroad in its decision making process. Real-world case studies show the proposed approach outperforms the manual approach in short-term scheduling and can be used to conduct long-term what-if analyses to yield managerial insights. PTSP schedules capital track maintenance projects, which are the largest track maintenance activities and account for the majority of railroad capital spending. A time-space network model was proposed to formulate PTSP. More than ten types of side constraints were considered in the model, including very complex constraints such as mutual exclusion constraints and consecution constraints. A multiple neighborhood search algorithm, including a decomposition and restriction search and a block-interchange search, was developed to solve the model. Various performance enhancement techniques, such as data reduction, augmented cost function and subproblem prioritization, were developed to improve the algorithm. The proposed approach has been adopted by a Class I railroad for two years. Our numerical results show the model solutions are able to satisfy all hard constraints and most soft constraints. Compared with the existing manual procedure, the proposed approach is able to bring significant cost savings and operational efficiency improvement. JTPCP is an intermediate problem between TISP and PTSP. It focuses on clustering thousands of capital track maintenance jobs (based on the defects identified in track inspection) into projects so that the projects can be scheduled in PTSP. A vehicle routing problem based model and a multiple-step heuristic algorithm were developed to solve this problem. Various side constraints such as mutual exclusion constraints and rounding constraints were considered. The proposed approach has been applied in practice and has shown good performance in both solution quality and efficiency.

Recent educational changes at higher educational level in Pakistan: English language teachers' perceptions and practices

Higher Education Institutes (HEIs) of any country could be a source of providing professionals to the country in many fields. By doing so, HEIs could play a pivotal role in the economic growth of the country. In Pakistan, it seems that, in the wake of this realization, steps have been taken to reform Higher Education. Drawing on the Triple I model of educational change covering Initiation, Implementation and Institutionalization (Fullan, 2007) this study focuses on the planning and implementation of reforms in the Education system of Pakistan at higher education level that have been introduced by the Higher Education Commission (HEC) since its inception in 2002. Kennedy’s model of hierarchical subsystems affecting innovation and Chin and Benne’s (1985) description of strategies for implementing change also provided guidelines for analyzing the changes in education in the country to highlight the role that the authorities expect the language teacher to play in the process of implementing these changes. A qualitative method is followed in this study to gather data from English language teachers at three universities of the Khyber Pakhtunkhwa province of Pakistan. A questionnaire was developed to look into the perceptions of English language teachers regarding the impact of these reforms. This was followed up by interviews. Responses from 28 teachers were received through questionnaire out of which 9 teachers were interviewed for detailed analysis of their perceptions. Thematic Content analysis was used to analyze and interpret the data. Some of the most significant changes that the respondents reported knowledge of included the introduction of Semester System, extending the Bachelors degree to four years from two years, promotion of research culture, and increased teachers’ autonomy in classroom practices. Implications of these reforms for English teachers’ professional development were also explored. The data indicate that the teachers generally have a positive attitude towards the changes. However, the data also show concerns that teachers have about the practical effectiveness of these changes in improving English language teaching and learning in Pakistani Universities. Some of the areas of concern are worries regarding resources, the assessment system, the number of qualified teachers, and instability in the educational policy. They are concerned about the training facilities and quality of the professional training available to them. Moreover, they report that training opportunities for their professional development are not available to all the teachers equally. Despite the HEC claims of providing regular training opportunities, the majority of the teachers did not receive any formal training in the last three years, while some teachers were able to access these opportunities multiple times. Through the recent reforms HEC has empowered the teachers in conducting the learning/teacher processes but this extra power has reduced their accountability and they can exercise these powers without any check on them. This empowerment is limited to the classroom and there appears to be no or minimal involvement in decision making at the top level of policy making. Such lack of involvement in the policy decisions seems to be generating a lack of sense of ownership among the teachers (Fullan 2003a:6). Although Quality Enhancement Cells have been developed in the universities to assure the desired quality of education, they might need a more active role to contribute in achieving the level of enhancement in education expected from them. Based on the perceptions of the respondents of this study and the review of the relevant literature, it is argued that it is unlikely for the reforms to be institutionalized if teachers are not given the right kind of awareness at the initiation stage and are not prepared at the implementation stage to cope with the challenge of a complex process. The teachers participating in this study, in general, have positive and enthusiastic attitudes towards most of the changes, in spite of some reservations. It could also be interesting to see if the power centers of the Pakistani Higher Education appreciate this enthusiasm and channel it for a strong Higher Education system in the country.

Intelligent pipeline control - a simulation study in the automotive sector

Automotive producers are aiming to make their order fulfilment processes more flexible. Opening the pipeline of planned products for dynamic allocation to dealers/ customers is a significant step to be more flexible but the behaviour of such Virtual-Build-To-Order systems are complex to predict and their performance varies significantly as product variety levels change. This study investigates the potential for intelligent control of the pipeline feed, taking into account the current status of inventory (level and mix) and of the volume and mix of unsold products in the planning pipeline, as well as the demand profile. Five ‘intelligent’ methods for selecting the next product to be planned into the production pipeline are analysed using a discrete event simulation model and compared to the unintelligent random feed. The methods are tested under two conditions, firstly when customers must be fulfilled with the exact product they request, and secondly when customers trade-off a shorter waiting time for compromise in specification. The two forms of customer behaviour have a substantial impact on the performance of the methods and there are also significant differences between the methods themselves. When the producer has an accurate model of customer demand, methods that attempt to harmonise the mix in the system to the demand distribution are superior.

Kwantyfikacja wybranych świadczeń ekosystemów na poziomie lokalnym. Przykład gminy Krajenka

Wydział Nauk Geograficznych i Geologicznych

Diseño de un modelo de nivelación de la producción en la empresa Lácteos San Antonio C. A. bajo metodología de manufactura esbelta

El presente trabajo de titulación tiene como propósito diseñar para la empresa Lácteos San Antonio C.A., un modelo que le permita eliminar los desniveles en la carga de trabajo u operaciones irregulares en el proceso de producción (Heijunka-Pull). El primer capítulo describe la situación actual de la empresa en relación a sus procesos de planificación de la producción. Además establece los problemas y objetivos a alcanzar, para finalmente exponer las herramientas que se utilizarán en la consecución de los mismos. En el segundo capítulo se detalla no sólo los principales conceptos y principios teóricos en los que se ha basado el modelo propuesto sino también se presenta el proceso que ha servido de guía para su elaboración. En el capítulo 3 se desarrolla el modelo de nivelación de la producción bajo la metodología de Manufactura esbelta (“Lean Manufacturing”), el cual le permitirá a la organización una mejor planificación de inventarios. Para ello se ha elaborado un presupuesto de ventas ajustado, cuyos datos han sido corregidos para una mejor aproximación a la demanda real mediante el cálculo del valor de los productos faltantes. Adicionalmente, se ha aplicado dos métodos de planificación para nivelar las órdenes de producción, los cuales buscan incrementar el nivel de disponibilidad mediante la reducción del tamaño de los lotes de producción y a través del incremento de la cantidad de productos por carga de trabajo.

Motion Planning and Controls with Safety and Temporal Constraints

Motion planning, or trajectory planning, commonly refers to a process of converting high-level task specifications into low-level control commands that can be executed on the system of interest. For different applications, the system will be different. It can be an autonomous vehicle, an Unmanned Aerial Vehicle(UAV), a humanoid robot, or an industrial robotic arm. As human machine interaction is essential in many of these systems, safety is fundamental and crucial. Many of the applications also involve performing a task in an optimal manner within a given time constraint. Therefore, in this thesis, we focus on two aspects of the motion planning problem. One is the verification and synthesis of the safe controls for autonomous ground and air vehicles in collision avoidance scenarios. The other part focuses on the high-level planning for the autonomous vehicles with the timed temporal constraints. In the first aspect of our work, we first propose a verification method to prove the safety and robustness of a path planner and the path following controls based on reachable sets. We demonstrate the method on quadrotor and automobile applications. Secondly, we propose a reachable set based collision avoidance algorithm for UAVs. Instead of the traditional approaches of collision avoidance between trajectories, we propose a collision avoidance scheme based on reachable sets and tubes. We then formulate the problem as a convex optimization problem seeking control set design for the aircraft to avoid collision. We apply our approach to collision avoidance scenarios of quadrotors and fixed-wing aircraft. In the second aspect of our work, we address the high level planning problems with timed temporal logic constraints. Firstly, we present an optimization based method for path planning of a mobile robot subject to timed temporal constraints, in a dynamic environment. Temporal logic (TL) can address very complex task specifications such as safety, coverage, motion sequencing etc. We use metric temporal logic (MTL) to encode the task specifications with timing constraints. We then translate the MTL formulae into mixed integer linear constraints and solve the associated optimization problem using a mixed integer linear program solver. We have applied our approach on several case studies in complex dynamical environments subjected to timed temporal specifications. Secondly, we also present a timed automaton based method for planning under the given timed temporal logic specifications. We use metric interval temporal logic (MITL), a member of the MTL family, to represent the task specification, and provide a constructive way to generate a timed automaton and methods to look for accepting runs on the automaton to find an optimal motion (or path) sequence for the robot to complete the task.

Avaliação da incorporação combinada dos resíduos de cascalho de perfuração de poço de petróleo e de polimento do porcelanato em cerâmica vermelha

Among the industries, those that produce ceramic porcelain for use in construction industry and oil, during the exploration and production period, play an important role in the production of waste. Much research has been carried out both by academia and the productive sector, sometimes reintroducing them in the same production line that generated them, sometimes in areas unrelated to their generation, as in the production of concrete and mortar for the construction, for example, but each one in an isolated way. In this research, the aim is to study the combined incorporation of the waste drill cuttings of oil well and the residue of the polishing of porcelain, generated in the final stage of finishing of this product in a clay matrix, for the production of red pottery, specifically bricks, ceramic blocks and tiles. The clay comes from the municipality of São Gonçalo, RN, the drilling waste is from the Natal basin, in Rio Grande do Norte, and the residue of the polishing proceeds from a ceramic porcelain of the State of Paraíba. For this purpose, we used a mixture of a plastic clay with a non-plastic, in a ratio of 50% each, settling formulations with the addition of these two residues in this clay matrix. In the formulations, both residues were incorporated with a minimum percentage of 2.5% and maximum of 12.5%, varying from 2.5% each, in each formulation, which the sum of the waste be no more than 15%. It should be noted that the residue of the polishing of ceramic porcelain is a IIa class (not inert). The materials were characterized by XRF, XRD, TG, DTA, laser granulometry and the plasticity index. The technological properties of water absorption, apparent porosity, linear shrinkage of burning, flexural tensile strength and bulk density were evaluated after the sintering of the pieces to 850 °C, 950 °C and 1050 °C, with a burning time of 3 hr, 3 hr and 30 minutes, and 3 hr and 50 minutes, respectively, with a heating rate of 10 °C/minute, for all formulations and landing of 30 minutes. To better understand the influence of each residue and temperature on the evaluated properties, we used the factorial planning and its surfaces of response for the interpretation of the results. It was found that the temperature has no statistical significance at a 95% of reliability level in flexural tensile strength and that it decreases the water absorption and the porosity, but increases the shrinkage and the bulk density. The results showed the feasibility of the desired incorporation, but adjusting the temperature to each product and formulation, and that the temperatures of 850 °C and 950 °C were the one that responded to the largest number of formulations

Typologies and spatialization of agricultural production systems in Rondônia, Brazil: linking land use, socioeconomics and territorial configuration.

The current Amazon landscape consists of heterogeneous mosaics formed by interactions between the original forest and productive activities. Recognizing and quantifying the characteristics of these landscapes is essential for understanding agricultural production chains, assessing the impact of policies, and in planning future actions. Our main objective was to construct the regionalization of agricultural production for Rondônia State (Brazilian Amazon) at the municipal level. We adopted a decision tree approach, using land use maps derived from remote sensing data (PRODES and TerraClass) combined with socioeconomic data. The decision trees allowed us to allocate municipalities to one of five agricultural production systems: (i) coexistence of livestock production and intensive agriculture; (ii) semi-intensive beef and milk production; (iii) semi-intensive beef production; (iv) intensive beef and milk production, and; (v) intensive beef production. These production systems are, respectively, linked to mechanized agriculture (i), traditional cattle farming with low management, with (ii) or without (iii) a significant presence of dairy farming, and to more intensive livestock farming with (iv) or without (v) a significant presence of dairy farming. The municipalities and associated production systems were then characterized using a wide variety of quantitative metrics grouped into four dimensions: (i) agricultural production; (ii) economics; (iii) territorial configuration, and; (iv) social characteristics. We found that production systems linked to mechanized agriculture predominate in the south of the state, while intensive farming is mainly found in the center of the state. Semi-intensive livestock farming is mainly located close to the southwest frontier and in the north of the state, where human occupation of the territory is not fully consolidated. This distributional pattern reflects the origins of the agricultural production system of Rondônia. Moreover, the characterization of the production systems provides insights into the pattern of occupation of the Amazon and the socioeconomic consequences of continuing agricultural expansion.

Microspheres for Liver Radiomicrospheres Therapy and Planning

Liver cancer accounts for nearly 10% of all cancers in the US. Intrahepatic Arterial Radiomicrosphere Therapy (RMT), also known as Selective Internal Radiation Treatment (SIRT), is one of the evolving treatment modalities. Successful patient clinical outcomes require suitable treatment planning followed by delivery of the microspheres for therapy. The production and in vitro evaluation of various polymers (PGCD, CHS and CHSg) microspheres for a RMT and RMT planning are described. Microparticles with a 30±10 µm size distribution were prepared by emulsion method. The in vitro half-life of the particles was determined in PBS buffer and porcine plasma and their potential application (treatment or treatment planning) established. Further, the fast degrading microspheres (≤ 48 hours in vitro half-life) were labeled with 68Ga and/or 99mTc as they are suitable for the imaging component of treatment planning, which is the primary emphasis of this dissertation. Labeling kinetics demonstrated that 68Ga-PGCD, 68Ga-CHSg and 68Ga-NOTA-CHSg can be labeled with more than 95% yield in 15 minutes; 99mTc-PGCD and 99mTc-CHSg can also be labeled with high yield within 15-30 minutes. In vitro stability after four hours was more than 90% in saline and PBS buffer for all of them. Experiments in reconstituted hemoglobin lysate were also performed. Two successful imaging (RMT planning) agents were found: 99mTc-CHSg and 68Ga-NOTA-CHSg. For the 99mTc-PGCD a successful perfusion image was obtained after 10 minutes, however the in vivo degradation was very fast (half-life), releasing the 99mTc from the lungs. Slow degrading CHS microparticles (> 21 days half-life) were modified with p-SCN-b-DOTA and labeled with 90Y for production of 90Y-DOTA-CHS. Radiochemical purity was evaluated in vitro and in vivo showing more than 90% stability after 72 and 24 hours respectively. All agents were compared to their respective gold standards (99mTc-MAA for 68Ga-NOTA-CHSg and 99mTc-CHSg; 90Y-SirTEX for 90Y-DOTA-CHS) showing superior in vivo stability. RMT and RMT planning agents (Therapy, PET and SPECT imaging) were designed and successfully evaluated in vitro and in vivo.

Rapamycin reverses age-related increases in mitochondrial ROS production at complex I, oxidative stress, accumulation of mtDNA fragments inside nuclear DNA, and lipofuscin level, and increases autophagy, in the liver of middle-aged mice

Rapamycin consistently increases longevity in mice although the mechanism of action of this drug is unknown. In the present investigation we studied the effect of rapamycin on mitochondrial oxidative stress at the same dose that is known to increase longevity in mice (14 mg of rapamycin/kg of diet). Middle aged mice (16 months old) showed significant age-related increases in mitochondrial ROS production at complex I, accumulation of mtDNA fragments inside nuclear DNA, mitochondrial protein lipoxidation, and lipofuscin accumulation compared to young animals (4 months old) in the liver. After 7 weeks of dietary treatment all those increases were totally or partially (lipofuscin) abolished by rapamycin, middle aged rapamycin-treated animals showing similar levels in those parameters to young animals. The decrease in mitochondrial ROS production was due to qualitative instead of quantitative changes in complex I. The decrease in mitochondrial protein lipoxidation was not due to decreases in the amount of highly oxidizable unsaturated fatty acids. Rapamycin also decreased the amount of RAPTOR (of mTOR complex) and increased the amounts of the PGC1-α and ATG13 proteins. The results are consistent with the possibility that rapamycin increases longevity in mice at least in part by lowering mitochondrial ROS production and increasing autophagy, decreasing the derived final forms of damage accumulated with age which are responsible for increased longevity. The decrease in lipofuscin accumulation induced by rapamycin adds to previous information suggesting that the increase in longevity induced by this drug can be due to a decrease in the rate of aging. © 2016 Elsevier Inc.

Integration of process planning and scheduling using mobile-agent based approach in a networked manufacturing environment

Effective and efficient implementation of intelligent and/or recently emerged networked manufacturing systems require an enterprise level integration. The networked manufacturing offers several advantages in the current competitive atmosphere by way to reduce, by shortening manufacturing cycle time and maintaining the production flexibility thereby achieving several feasible process plans. The first step in this direction is to integrate manufacturing functions such as process planning and scheduling for multi-jobs in a network based manufacturing system. It is difficult to determine a proper plan that meets conflicting objectives simultaneously. This paper describes a mobile-agent based negotiation approach to integrate manufacturing functions in a distributed manner; and its fundamental framework and functions are presented. Moreover, ontology has been constructed by using the Protégé software which possesses the flexibility to convert knowledge into Extensible Markup Language (XML) schema of Web Ontology Language (OWL) documents. The generated XML schemas have been used to transfer information throughout the manufacturing network for the intelligent interoperable integration of product data models and manufacturing resources. To validate the feasibility of the proposed approach, an illustrative example along with varied production environments that includes production demand fluctuations is presented and compared the proposed approach performance and its effectiveness with evolutionary algorithm based Hybrid Dynamic-DNA (HD-DNA) algorithm. The results show that the proposed scheme is very effective and reasonably acceptable for integration of manufacturing functions.

De la lecture à la production verbale écrite, et réciproquement

L’objectif du chapitre consiste à dresser un bilan des acquis concernant les relations entre lecture-compréhension et écriture-rédaction. Deux approches sont envisagées. La première s’appuie sur des évaluations globales des dimensions relatives dites au bas niveau (au code : écriture et décodage) et des dimensions de haut niveau (compréhension et production textuelle). Elle met en évidence des relations fortes entre les premières, mais plutôt faibles entre les secondes. La seconde approche procède à la mise en relation entre composantes des deux activités : lexique (en lecture et en production), syntaxe, structure des textes, etc. Elle fait apparaître une plus grande complexité des relations et une relative indépendance des composantes. Elle conduit à reposer la question des impacts respectifs et réciproques de la lecture-compréhension sur l’écriture-rédaction. Elle amène à s’interroger sur ce que seraient les effets d’une pratique accordant une priorité à la production plutôt qu’à la lecture-compréhension et à rechercher les modalités d’intervention visant à améliorer l’une à partir de l’autre, et réciproquement.

MicroRNA modulation of aldosterone production in the adrenal gland

Hypertension is the major risk factor for coronary disease worldwide. Primary hypertension is idiopathic in origin but is thought to arise from multiple risk factors including genetic, lifestyle and environmental influences. Secondary hypertension has a more definite aetiology; its major single cause is primary aldosteronism (PA), the greatest proportion of which is caused by aldosteroneproducing adenoma (APA), where aldosterone is synthesized at high levels by an adenoma of the adrenal gland. There is strong evidence to show that high aldosterone levels cause adverse effects on cardiovascular, cerebrovascular, renal and other systems. Extensive studies have been conducted to analyse the role that regulation of CYP11B2, the gene encoding the aldosterone synthase enzyme plays in determining aldosterone production and the development of hypertension. One significant regulatory factor that has only recently emerged is microRNA (miRNA). miRNAs are small non-coding RNAs, synthesized by a series of enzymatic processes, that negatively regulate gene expression at the posttranscriptional level. Detection and manipulation of miRNA is now known to be a viable method in the treatment, prevention and prognosis of certain diseases. The aim of the present study was to identify miRNAs likely to have a role in the regulation of corticosteroid biosynthesis. To achieve this, the miRNA profile of APA and normal human adrenal tissue was compared, as was the H295R adrenocortical cell line model of adrenocortical function, under both basal conditions and following stimulation of aldosterone production. Key differentially-expressed miRNAs were then identified and bioinformatic tools used to identify likely mRNA targets and pathways for these miRNAs, several of which were investigated and validated using in vitro methods. The background to this study is set out in Chapter 1 of this thesis, followed by a description of the major technical methods employed in Chapter 2. Chapter 3 presents the first of the study results, analysing differences in miRNA profile between APA and normal human adrenal tissue. Microarray was implemented to detect the expression of miRNAs in these two tissue types and several miRNAs were found to vary significantly and consistently between them. Furthermore, members of several miRNA clusters exhibited similar changes in expression pattern between the two tissues e.g. members of cluster miR-29b-1 (miR-29a-3p and miR-29b-3p) and of cluster miR-29b-2 (miR-29b-3p and miR-29c- 3p) are downregulated in APA, while members of cluster let-7a-1 (let-7a-5p and let-7d-5p), cluster let-7a-3 (let-7a-5p and let-7b-5p) and cluster miR-134 (miR- 134 and miR-382) are upregulated. Further bioinformatic analysis explored the possible biological function of these miRNAs using Ingenuity® Systems Pathway Analysis software. This led to the identification of validated mRNAs already known to be targeted by these miRNAs, as well as the prediction of other mRNAs that are likely targets and which are involved in processes relevant to APA pathology including cholesterol synthesis (HMGCR) and corticosteroidogenesis (CYP11B2). It was therefore hypothesised that increases in miR-125a-5p or miR- 335-5p would reduce HMGCR and CYP11B2 expression. Chapter 4 describes the characterisation of H295R cells of different strains and sources (H295R Strain 1, 2, 3 and HAC 15). Expression of CYP11B2 was assessed following application of 3 different stimulants: Angio II, dbcAMP and KCl. The most responsive strain to stimulation was Strain 1 at lower passage numbers. Furthermore, H295R proliferation increased following Angio II stimulation. In Chapter 5, the hypothesis that increases in miR-125a-5p or miR-335-5p reduces HMGCR and CYP11B2 expression was tested using realtime quantitative RT-PCR and transfection of miRNA mimics and inhibitors into the H295R cell line model of adrenocortical function. In this way, miR-125a-5p and miR-335-5p were shown to downregulate CYP11B2 and HMGCR expression, thereby validating certain of the bioinformatic predictions generated in Chapter 3. The study of miRNA profile in the H295R cell lines was conducted in Chapter 6, analysing how it changes under conditions that increase aldosterone secretion, including stimulation Angiotensin II, potassium chloride or dibutyryl cAMP (as a substitute for adrenocorticotropic hormone). miRNA profiling identified 7 miRNAs that are consistently downregulated by all three stimuli relative to basal cells: miR-106a-5p, miR-154-3p, miR-17-5p, miR-196b-5p, miR-19a-3p, miR-20b- 5p and miR-766-3p. These miRNAs include those derived from cluster miR-106a- 5p/miR-20b-5p and cluster miR-17-5p/miR-19a-3p, each producing a single polycistronic transcript. IPA bioinformatic analysis was again applied to identify experimentally validated and predicted mRNA targets of these miRNAs and the key biological pathways likely to be affected. This predicted several interactions between miRNAs derived from cluster miR-17-5p/miR-19a-3p and important mRNAs involved in cholesterol biosynthesis: LDLR and ABCA1. These predictions were investigated by in vitro experiment. miR-17-5p/miR-106a-p and miR-20b-5p were found to be consistently downregulated by stimulation of aldosterone biosynthesis. Moreover, miR-766-3p was upregulation throughout. Furthermore, I was able to validate the downregulation of LDLR by miR-17 transfection, as predicted by IPA. In summary, this study identified key miRNAs that are differentially-expressed in vivo in cases of APA or in vitro following stimulation of aldosterone biosynthesis. The many possible biological actions these miRNAs could have were filtered by bioinformatic analysis and selected interactions validated in vitro. While direct actions of these miRNAs on steroidogenic enzymes were identified, cholesterol handling also emerged as an important target and may represent a useful point of intervention in future therapies designed to modulate aldosterone biosynthesis and reduce its harmful effects.