Fate of nitrogen in bioreactor landfills: lab-scale in situ aeration in well decomposed MSW

Dissertação para obtenção do Grau de Mestre em Engenharia do ambiente, perfil de engenharia sanitária

NHL 3.5 mortars with scrap tire rubber

The use of wastes and industrial by-products as building materials is an important issue in order to decrease costs with waste management and the embodied energy of building products. Scrap tire rubber has been studied as aggregate for cementitious materials. Natural hydraulic limes are natural binders with particular characteristics of both air and hydraulic binders. Their specifications became stricter with the last version of EN 459-1:2010. In this study scrap tire rubber was used as additional aggregate of mortars, based on NHL3.5 and natural sand. Different particle size fractions and proportions of scrap tire rubber were used: a mix obtained almost directly from industry (only after sieving for preparation of particle sizes similar to mortar aggregate) and separated fine, medium and coarse fractions; 0%, 18%, 36% and 54% weight of binder, corresponding to 2.5%, 5% and 7.5% weight of sand. The influence of the rubbers´ additions on the mortars´ fresh state, mechanical and physical performance is presented, namely by flow table consistency, water retention, fresh bulk density, dynamic elasticity modulus, flexural and compressive strength, open porosity and bulk density, capillary absorption, drying and thermal conductivity. The use of the rubber mix coming from the waste tire industry seems advantageous and may open possibilities for use as raw material by the mortars industry.

Analysis of chromium behaviour and speciation during the electrodialytic process

The interest in chromium (Cr) arises from the widespread use of this heavy metal in various industrial processes that cause its release as liquid, solid and gaseous waste into the environment. The impact of Cr on the environment and living organisms primarily depends on its chemical form, since Cr(III) is an essential micronutrient for humans, other animals and plants, and Cr(VI) is highly toxic and a known human carcinogen. This study aimed to evaluate if the electrodialytic process (ED) is an appropriate treatment for Cr removal, through a critical overview of Cr speciation, before and after the ED experiments, to assess possible Cr(III)-Cr(VI) interconversions during the treatment. ED was the treatment technique applied to two types of matrices containing Cr: chromate copper arsenate (CCA) contaminated soil and municipal solid waste incineration (MSWI) fly ash. In order to study Cr remediation, three EDR set-ups were used: a new set-up, the combined cell (2/3C or 3/2C), with three compartments, alternating current between two anodes and different initial experimental conditions, one set-up with three compartments (3C cell) and the other set-up with two compartments (2C cell). The Cr removal rates obtained in this study were between 10-36% for the soil, and 1-13% for the fly ash. The highest Cr removal rates were achieved in the 26 days experiments: 36% for the soil, 13% for the fly ash. Regarding the 13 days experiments, the highest Cr removal rates were attained with the 2/3C set-up: 24% for the soil, 5% for the fly ash. The analysis of Cr(VI) was performed before and after ED experiments to evaluate eventual changes in Cr speciation during the treatment. This analysis was conducted by two methods: USEPA Method 3060A, for the extraction of Cr(VI); and Hach Company Method 8023, for the detection of Cr(VI). Despite the differences in Cr total concentration, both matrices presented a similar speciation, with Cr(III) being the main species found and Cr(VI) less than 3% of Cr total, before and after the treatment. For fly ash, Cr(VI) was initially below the detection limit of the method and remained that way after the treatment. For soil, Cr(VI) decreased after the treatment. Oxidation of Cr(III) to Cr(VI) did not occur during the ED process since there was no increase in Cr(VI) in the matrices after the treatment. Hence, the results of this study indicate that ED is an appropriate technique to remediate matrices containing Cr because it contributes to Cr removal, without causing Cr(III)-Cr(VI) interconversions.

Natural hydraulic lime (nhl3.5) mortars with scrap tire rubber

The use of wastes and industrial by-products as building materials is an important issue in order to decrease costs with waste management and the embodied energy of building products. In this study scrap tire rubber was used as additional aggregate of mortars based on natural hydraulic lime NHL 3.5 and natural sand. Different particle size fractions and proportions of scrap tire rubber were used: a mix obtained directly from industry and separated fine, medium and coarse fractions; 0 %, 18 %, 36 % and 54 % of the weight of binder, corresponding to 2.5 %, 5 % and 7.5 % of the weight of sand. As mortars based on NHL specifications became stricter with the current version of EN 459–1:2015, the influence of the rubber’s additions on the mortars’ fresh state, mechanical and physical performance is presented in this work: flow table consistency, water retention, dynamic elasticity modulus, flexural and compressive strength, open porosity and bulk density, capillary absorption, drying and thermal conductivity are studied. The use of the rubber mix coming from the waste tire industry seems advantageous and may open possibilities for use as raw material by the mortars industry.

Análise comparativa da designação, definição e classificação de resíduos hospitalares em legislações da União Europeia

RESUMO - O quadro legislativo de um país, no que concerne aos resíduos hospitalares (RH), contém a sua designação, definição e classificação. É essa a matriz de referência para a separação efectuada na origem e todo o circuito que, a partir desse momento, um determinado resíduo toma até ao seu tratamento. Assim, faz-se o estudo comparativo das definições e tipos de classificação de RH em quatro países da União Europeia: Alemanha, Reino Unido, Espanha (Região Autónoma da Catalunha) e Portugal. Reconhecem-se as diferentes designações deste tipo de resíduos e discute-se o seu significado e as suas implicações na percepção de risco por parte dos profissionais e do público. Identificam-se duas estratégias subjacentes à elaboração das definições: a contaminação de materiais com microrganismos patogénicos bem definidos, as suas fontes e as actividades que os produzem. Apresentam-se as classificações de RH propostas pelos organismos internacionais de referência e analisa-se comparativamente a evolução do enquadramento legal português e da Região Autónoma da Catalunha, evidenciando-se a variabilidade temporal e justificando-se a necessidade de se efectuar o estudo da variabilidade geográfica. Utilizam-se três critérios para a análise das classificações consideradas: a concordância definição-classificação, o número e tipo de grupos das classificações e os tipos de resíduos por grupos. Identificam-se os denominadores comuns às classificações analisadas, assim como as suas principais diferenças. Conclui-se que a definição de RH adoptada por cada país condiciona o tipo de classificação de RH nesse mesmo país. Verifica-se ainda que a inexistência de critérios claros de avaliação da contaminação pode dificultar a tarefa da triagem dos RH por parte dos profissionais de saúde.

Técnicas de análise laboratorial para solos, matéria vegetal e corretivos orgãnicos

Dissertação de mestrado em Técnicas de Caracterização e Análise Química

A review of the development of regional sludge treatment centres and a baseline characterisation of Irish sewage sludges

This Study assessed the development of sludge treatment and reuse policy since the original 1993 National Sludge Strategy Report (Weston-FTA, 1993). A review of the 48 sludge treatment centres, current wastewater treatment systems and current or planned sludge treatment and reuse systems was carried out Sludges from all Regional Sludge Treatment Centres (areas) were characterised through analysis of selected parameters. There have been many changes to the original policy, as a result of boundary reviews, delays in developing sludge management plans, development in technology and changes in tendering policy, most notably a move to design-build-operate (DBO) projects. As a result, there are now 35 designated Hub Centres. Only 5 of the Hub Centres are producing Class A Biosolids. These are Ringsend, Killamey, Carlow, Navan and Osberstown. Ringsend is the only Hub Centre that is fully operational, treating sludge from surrounding regions by Thermal Drying. Killamey is producing Class A Biosolids using Autothermal Thermophilic Aerobic Digestion (ATAD) but is not, as yet, treating imported sludge. The remaining three plants are producing Class A Biosolids using Alkaline Stabilisation. Anaerobic Digestion with post pasteurisation is the most common form of sludge treatment, with 11 Hub Centres proposing to use it. One plant is using ATAD, two intend to use Alkaline Stabilisation, seven have selected Thermal Drying and three have selected Composting. While the remaining plants have not decided which sludge treatment to select, this is because of incomplete Sludge Management Plans and on DBO contracts. Analysis of sludges from the Hub Centres showed that all Irish sewage sludge is safe for agricultural reuse as defined by the Waste Management Regulations {Use of Sewage Sludge in Agriculture) (S.I. 267/2001), providing that a nutrient management plan is taken into consideration and that the soil limits of the 1998 (S.I. 148/1998) Waste Management Regulations are not exceeded.

Avaluació ambiental de la recollida de residus municipals de Sant Boi de Llobregat

La gestió dels residus municipals ha d’avançar cap a la sostenibilitat per tal de poder fer front al gran volum de residus que es generen actualment i no malmetre el medi ambient. Aquest fet motiva a l’elaboració d’aquest projecte que es centra en l’anàlisi del procés de recollida dels residus municipals. L’estudi realitza en primer lloc una avaluació ambiental de la recollida global i una avaluació ambiental específica de la recollida de la fracció Resta mitjançant el programari SIMUR (desenvolupada per l’Agència d’Ecologia Urbana de Barcelona). Amb aquesta eina de simulació de models de gestió de residus municipal es calcula el balanç de massa, el balanç energètic, el balanç d’emissions i el balanç econòmic del procés de recollida. La metodologia per al desenvolupament de la segona fase del projecte es basa en la realització de treball de camp per al disseny de taules descriptives dels circuits de recollida de la fracció Resta, que permeten comparar-los entre sí i aconseguir l’objectiu d’avaluar l’eficiència dels sistemes de recollida de càrrega lateral i posterior de la fracció. L’assoliment dels objectius permet fer-se una idea de l’estat actual de la recollida dels residus de Sant Boi, identificant-ne els punts forts i febles i plantejant propostes de millora encarades a aconseguir una futura generació i recollida de residus més respectuosa amb l’entorn.

Anàlisi i diagnosi ambiental dels refugis del PNAP

Els refugis de muntanya es troben situats en zones d’interès natural, sovint protegides, com és el cas dels deu refugis del Parc Natural de l’Alt Pirineu. En els darrers anys s’ha observat una diversificació en l’ús dels refugis de muntanya, originalment construïts per donar aixopluc als excursionistes, degut a l’augment del turisme i la popularització dels esports de neu i d’aventura. Els refugis estudiats es poden agrupar en tres tipologies diferents: refugis guardats, refugis alberg i refugis associats a pistes d’esquí, cadascuna de les quals presenta una realitat i unes problemàtiques diferents. Mitjançant una metodologia pròpia, es pretén fer una anàlisi i una diagnosi ambiental de cada cas d’estudi i de les diferents tipologies a partir dels vectors que poden generar un major impacte en l’entorn immediat dels refugis: aspectes socioeconòmics, arquitectura, paisatge i impacte visual, energia elèctrica i tèrmica, aigua potable i residual i residus sòlids. La diagnosi permet identificar els aspectes de cada refugi i tipologia que requereixen propostes de millora. Finalment es fa una proposta d’ecoetiqueta de serveis per a refugis guardats basada en el Distintiu de Garantia de Qualitat Ambiental de la Generalitat de Catalunya, ja aplicat amb èxit a altres establiments de serveis.

The efficiency of concentration methods used to detect enteric viruses in anaerobically digested sludge

The presence of enteric viruses in biosolids can be underestimated due to the inefficient methods (mainly molecular methods) used to recover the viruses from these matrices. Therefore, the goal of this study was to evaluate the different methods used to recover adenoviruses (AdV), rotavirus species A (RVA), norovirus genogroup II (NoV GII) and the hepatitis A virus (HAV) from biosolid samples at a large urban wastewater treatment plant in Brazil after they had been treated by mesophilic anaerobic digestion. Quantitative polymerase chain reaction (PCR) was used for spiking experiments to compare the detection limits of feasible methods, such as beef extract elution and ultracentrifugation. Tests were performed to detect the inhibition levels and the bacteriophage PP7 was used as an internal control. The results showed that the inhibitors affected the efficiency of the PCR reaction and that beef extract elution is a suitable method for detecting enteric viruses, mainly AdV from biosolid samples. All of the viral groups were detected in the biosolid samples: AdV (90%), RVA, NoV GII (45%) and HAV (18%), indicating the viruses' resistance to the anaerobic treatment process. This is the first study in Brazil to detect the presence of RVA, AdV, NoV GII and HAV in anaerobically digested sludge, highlighting the importance of adequate waste management.

Environmental Services - Recycling Technical Assistance,

Iowa is one of the more progressive recycling states in the U.S. due in large part to its environmental technical assistance programs for business. The Iowa Department of Economic Development (IDED), Iowa Department of Natural Resources (IDNR), the Recycle Reuse Technology Transfer Center (RRTTC) and the Iowa Waste Reduction Center (IWRC) work together to offer services that help businesses save money, increase operational efficiencies, enhance regulatory compliance and manage difficult waste management issues.

The policy relevance of wear emissions from road transport, now and in the future : an international workshop report and consensus statement

Road transport emissions are a major contributor to ambient particulate matter concentrations and have been associated with adverse health effects. Therefore, these emissions are targeted through increasingly stringent European emission standards. These policies succeed in reducing exhaust emissions, but do not address "nonexhaust" emissions from brake wear, tire wear, road wear, and suspension in air of road dust. Is this a problem? To what extent do nonexhaust emissions contribute to ambient concentrations of PM10 or PM2.5? In the near future, wear emissions may dominate the remaining traffic-related PM10 emissions in Europe, mostly due to the steep decrease in PM exhaust emissions. This underlines the need to determine the relevance of the wear emissions as a contribution to the existing ambient PM concentrations, and the need to assess the health risks related to wear particles, which has not yet received much attention. During a workshop in 2011, available knowledge was reported and evaluated so as to draw conclusions on the relevance of traffic-related wear emissions for air quality policy development. On the basis of available evidence, which is briefly presented in this paper, it was concluded that nonexhaust emissions and in particular suspension in air of road dust are major contributors to exceedances at street locations of the PM10 air quality standards in various European cities. Furthermore, wear-related PM emissions that contain high concentrations of metals may (despite their limited contribution to the mass of nonexhaust emissions) cause significant health risks for the population, especially those living near intensely trafficked locations. To quantify the existing health risks, targeted research is required on wear emissions, their dispersion in urban areas, population exposure, and its effects on health. Such information will be crucial for environmental policymakers as an input for discussions on the need to develop control strategies.

Environmental Services - Recycling Technical Assistance, 2010

Iowa is one of the more progressive recycling states in the U.S. due in large part to its environmental technical assistance programs for business. The Iowa Department of Economic Development (IDED), Iowa Department of Natural Resources (IDNR), the Recycle Reuse Technology Transfer Center (RRTTC) and the Iowa Waste Reduction Center (IWRC) work together to offer services that help businesses save money, increase operational efficiencies, enhance regulatory compliance and manage difficult waste management issues.