Ergonomia aplicada em posto de trabalho do operador de tratores: sistema para aquisição de coordenadas tridimensionais

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Rest stops during road transport: Impacts on performance and acute-phase protein responses of feeder cattle

Angus x Hereford steers (n = 42) and heifers (n = 21) were ranked by gender and BW on d 0 of the experiment and randomly assigned to 1 of 3 treatments: 1) no transport and full access to feed and water (CON); 2) continuous road transport for 1,290 km (TRANS), or 3) road transport for 1,290 km, with rest stops every 430 km (STOP; total of 2 rest stops). Treatments were applied from d 0 to 1 of the experiment. Cattle from TRANS and STOP treatments were transported in separate commercial livestock trailers, within a single 2.1 x 7.2 m compartment, but through the exact same route. During each rest stop, STOP cattle were unloaded and offered mixed alfalfa-grass hay and water for ad libitum consumption for 2 h. Upon arrival of STOP and TRANS on d 1, cattle were ranked by sex and BW within each treatment and assigned to 21 feedlot pens (7 pens/treatment; 2 steers and 1 heifer/pen). Full BW was recorded before (d -1 and 0) treatment application and at the end of experiment (d 28 and 29). Total DMI was evaluated daily from d 1 to 28. Blood samples were collected on d 0 (before loading of TRANS and STOP cattle), 1 (immediately after unloading of TRANS and STOP cattle), 4, 7, 10, 14, 21, and 28. Body weight shrink from d 0 to d 1 was reduced (P < 0.01) in CON compared to TRANS and STOP, and reduced in STOP compared to TRANS. Mean ADG was greater (P < 0.05) in CON compared to TRANS and STOP, but similar (P = 0.68) between TRANS and STOP. No treatment effects were detected (P >= 0.18) on hay, concentrate, and total DMI. Mean G: F was greater (P = 0.05) in CON compared to STOP, tended to be greater (P = 0.08) in CON compared to TRANS, and similar (P = 0.85) between TRANS and STOP. Plasma cortisol concentrations were greater (P <= 0.04) in TRANS compared to CON and STOP on d 1, and greater (P = 0.04) in TRANS compared to CON on d 4. Serum NEFA concentrations were greater (P < 0.01) in TRANS compared to CON and STOP on d 1, and greater (P <= 0.05) in TRANS compared to CON on d 4 and 7. Mean plasma ceruloplasmin concentrations were similar (P = 0.19) among treatments. Plasma haptoglobin concentrations were greater (P <= 0.04) in TRANS compared to CON and STOP on d 1, and in STOP compared to CON on d 1. In conclusion, inclusion of rest stops during a 1,290-km transport prevented the increase in circulating cortisol and alleviated the NEFA and haptoglobin response elicited by transport, but did not improve feedlot receiving performance of transported cattle.

eIF5A and EF-P: two unique translation factors are now traveling the same road

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Implant-retained finger prosthesis with modified retention system

Background: Amputations affect both the physical and the psychological aspects of an individual, causing significant impact on self-esteem. The main causes of finger amputations are work-related accidents with dangerous machinery, road traffic accidents, and animal bites, as well as systemic diseases such as diabetes. This report aims to describe a simple technique for fabrication of implant-retained finger prosthesis with a modified base of the retention system.Case Description and Methods: The O-Ring retention system was used with a modified hexagon-shaped base and a metallic capsule adapted to the acrylic resin to attach the prosthesis to the implant.Findings and Outcomes: The prosthesis was made with silicone, and after osseointegration, it was installed without complications, leading to a patient satisfied with the end result and encouraged to return to social life.

Vibration and tipping of agricultural machinery: A reality to be adjusted

The present study aimed to develop a methodology for the collection, transfer, storage and processing of vibration levels emitted in jobs occupied in agricultural machinery. The reason of this work is the study the vibration dose applied to operators of heavy vehicles and its relation to occupational health, linking the still high number of accidents involving farm machinery in relation to overturning (tipping). There is a need for the development and improvement of efficient tools in measuring vibration and tilt machine work, which minimize damage to health and accident risks for operators.

Road wanderers in Brazil: a study on modern psychosocial human mobility

Human mobility patterns are quite diverse nowadays and a very singular, extreme pattern is seen in the Brazilian scene: road wandering. Road wanderers are individuals who leave their home, family, work and other territories of a settled life and throw themselves into a life of solitary wandering along Brazilian highways. This study aimed to describe the lifestyle of road wanderers, investigate the reasons that led them choose this way of living and understand it against a background of modern human mobility patterns. A total of 63 interviews were conducted with individuals wandering on road shoulders. We found road wandering is associated with the following determinants: poverty; unemployment; marital conflicts; emotional suffering following the loss of loved ones; desires for adventure and freedom; and cultural symbols related to journey, migration, exodus and other modes of displacement. Despite its particularities, road wandering can be understood as a way of human mobility in the modern world.

Romances rebeldes - a tradição de rebeldia na literatura norte-americana: de Moby Dick a On the Road

Pós-graduação em Estudos Literários - FCLAR

B chromosome of the African cichlid fish Astatotilapia latifasciata: methylation patterns and transcriptional levels of DNA methylation machinery genes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Semiautomatic object-space road extraction combining a stereoscopic image pair and a TIN-Based DTM

In this letter, a semiautomatic method for road extraction in object space is proposed that combines a stereoscopic pair of low-resolution aerial images with a digital terrain model (DTM) structured as a triangulated irregular network (TIN). First, we formulate an objective function in the object space to allow the modeling of roads in 3-D. In this model, the TIN-based DTM allows the search for the optimal polyline to be restricted along a narrow band that is overlaid upon it. Finally, the optimal polyline for each road is obtained by optimizing the objective function using the dynamic programming optimization algorithm. A few seed points need to be supplied by an operator. To evaluate the performance of the proposed method, a set of experiments was designed using two stereoscopic pairs of low-resolution aerial images and a TIN-based DTM with an average resolution of 1 m. The experimental results showed that the proposed method worked properly, even when faced with anomalies along roads, such as obstructions caused by shadows and trees.

MxA interacts with and is modified by the SUMOylation machinery

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Road-kills of the giant anteater in south-eastern Brazil: 10 years monitoring spatial and temporal determinants

Context. The giant anteater, Myrmecophaga tridactyla, is a large insectivorous mammal from Cerrado which is classified as vulnerable by the IUCN's red list. In spite of frequent giant anteater casualties, there continues to be a lack of published data on how road and landscape attributes affect road-kill rates - information that could prove useful in guiding mitigation measures.Aims. We seek to determine whether road and landscape attributes influence the incidence of road-kills of the giant anteater.Methods. From February 2002 to December 2012 (except for 2004), five roads in two regions in south-eastern Brazil were surveyed twice each month by car. We recorded temporal road-kill data for the giant anteater and related spatial road variables. These variables were also recorded at regular control sites every 2 km. We also took traffic volume data on stretches of the two roads to correlate with road-kills.Key results. Of the 45 anteater casualties recorded, there was a predominance of adult males. On roads MG-428 and SP-334, we found anteater road-kills were more common in the dry season, negatively correlated with traffic volume and related to the presence of native vegetation. Accordingly, road-kill sites tended to occur near the cerrado and grasslands and also appeared more frequently on some straight stretches of roadways. Although it was not shown to influence road-kill rates, topography data does point to regular overpass/underpass locations allowing population connectivity. Termitaria or ant nests were present at all road-kill sites, with 86% having signs of feeding.Conclusions. Native vegetation along roadways, together with straight road design, increases the probability of anteater road-kills by 40.1%.Implications. For mitigation, mowing and removing insect nests on roadsides, as well as roadside wildlife fencing in cerrado and grassland areas is suggested. Warning signs and radar to reduce vehicle speed are recommended for both human safety and anteater conservation. With regard to population connectivity, the absence of aggregated anteater road-kill data in this study meant that there were no particular crossing locations identified. However, the collected topography data do show places that could be used for roadway crossings. The measures indicated may apply to similar species and types of topography on other continents.

Molecular detection of Leishmania spp. in road-killed wild mammals in the Central Western area of the State of São Paulo, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development of CAN-based distributed control system for variable rate technology in agricultural machinery

The number of electronic devices connected to agricultural machinery is increasing to support new agricultural practices tasks related to the Precision Agriculture such as spatial variability mapping and Variable Rate Technology (VRT). The Distributed Control System (DCS) is a suitable solution for decentralization of the data acquisition system and the Controller Area Network (CAN) is the major trend among the embedded communications protocols for agricultural machinery and vehicles. The application of soil correctives is a typical problem in Brazil. The efficiency of this correction process is highly dependent of the inputs way at soil and the occurrence of errors affects directly the agricultural yield. To handle this problem, this paper presents the development of a CAN-based distributed control system for a VRT system of soil corrective in agricultural machinery. The VRT system is composed by a tractor-implement that applies a desired rate of inputs according to the georeferenced prescription map of the farm field to support PA (Precision Agriculture). The performance evaluation of the CAN-based VRT system was done by experimental tests and analyzing the CAN messages transmitted in the operation of the entire system. The results of the control error according to the necessity of agricultural application allow conclude that the developed VRT system is suitable for the agricultural productions reaching an acceptable response time and application error. The CAN-Based DCS solution applied in the VRT system reduced the complexity of the control system, easing the installation and maintenance. The use of VRT system allowed applying only the required inputs, increasing the efficiency operation and minimizing the environmental impact.

Comparativo ergonômico de duas metododologias para aquisição de coordenadas tridimensionais do posto de trabalho do operador de trato

This research aimed to the comparison between two methods for obtaining three-dimensional coordinates of the controls of the upper limbs of the job of the tractor operator. The methods used were based on NBR / NM / ISO 5353 - Road machines, tractors and agricultural and forestry machinery – Reference point of the seat. The first method used follows the principles recommended by the standard NBR/NM/ISO/5353 The second method is an adaptation of this standard with the introduction of a laser measuring equipment developed by Silva (2009). The results were compared statistically to evaluate differences between the methodological processes involved. In this research, data was collected thought a brand new tractor Massey Ferguson model MF 292, awarded by the dealership from Londrina. The results have shown a considerable variation between the traditional measurement process and the laser measuring. It must be considered that this variation can be used to calibrate the tractor controls positioning, therefore the tractor is not in accordance to ABNT.

Road safety: implications for sustainable development in Latin America

Road accidents cause more deaths than homicides in Latin America, nevertheless it is not highlighted as a major concern by media and society. World Health Organization put this issue in high priority by releasing the Decade of Action in Road Safety that establishes five pillars to guide national road safety plans and activities. This paper addresses the drawbacks in the implementation of these actions in Latin American countries and its implications to achieve a sustainable development. The main concerns are: lack of empowerment of the road safety management organisations; lower vehicular standards; corruption related to the enforcement of traffic safety laws to and to the construction of safer roads; absence of safety vehicular inspections; vehicle fleet increase, decrease of public transportation demand; and the absence of a safety culture. Without facing these problems, sustainable development in Latin America will be impaired, once road safety is a fundamental link to achieve sustainability.