As coisas da casa: cultura material, migrações e memórias familiares

Este livro corresponde, no essencial, à investigação que realizei no âmbito do doutoramento em Antropologia Social e Cultural da Universidade Nova de Lisboa e que terminei em 2007. Publicar um trabalho desta natureza quase dez anos após a sua conclusão foi uma tarefa simultaneamente complexa e entusiasmante. Por um lado, obrigou a revisões intensas e cortes substanciais, bem como à leitura de materiais que não tinham sido usados aquando da primeira redação e à consulta de trabalhos que entretanto foram sendo publicados sobre temas afins. Por outro, permitiu descobrir aspetos originais e olhar para detalhes que tinham passado despercebidos na primeira versão do trabalho e reforçaram a argumentação desenvolvida.

Interrupting the courtroom organism: screaming bodies, material affects and the theatre of cruelty

This article offers a method of reading the courtroom which produces an alternative mapping of the space. My method combines a reading of Antonin Artaud’s Theatre of Cruelty with a Deleuzian theoretical analysis. I suggest that this is a useful method since it allows examination of the spatial praxes of the courtroom which pulsate with a power to organize, terrorize and to judge. This method is also able to conceptualize the presence of ‘‘screaming’’ bodies and living matter which are appropriated to build, as well as feed the presence and functioning of the courtroom space, or organism. By using a method that articulates the cry of these bodies in the shadow of the organism, it becomes clear that this cry is both unwelcome and suppressed by the courtroom. The howl of anxious bodies enduring the process and space of the law can be materialized through interruptions to the courtroom, such as when bodies stand when they should not and when they speak when they should be silent. These vociferous actualizations of the scream serve only to feed the organism they seek to disturb, yet if the scream is listened to before it disrupts, the interruption becomes-imperceptible to the courtroom. Through my Artaudian/Deleuzian reading, I give a voice to the corporeal gasp that lingers before the cry, which is embedded within the embodied multiplicity from which it is possible to draw a creative line of flight. The creative momentum of this line of flight produces a sustainable interruption to the courtroom process, which instead of being consumed by the system, has the potential to produce new courtroom alignments. My text therefore offers an alternative reading of the courtroom, and in doing so also offers a refined understanding of how to productively ‘‘interrupt’’ the courtroom process.

Flesh of the Law: Material Metaphors

Existing legal metaphors, even the predominantly spatial and corporeal ones, paradoxically perpetuate a dematerialized impression of the law. This is because they depict the law as universal, adversarial, and court-based, thus ignoring alternative legalities. Instead, there is a need to employ more radically material metaphors, in line with the material turn in law and other disciplines, in order to allow law's materiality to come forth. I explore the connection between language and matter (the ‘flesh’ of the law) through legal, linguistic, and art theory, and conclude by suggesting four characteristics of material legal metaphors.

Introduction: The ‘material turn’ in migration studies

This introduction firstly discusses the ongoing paradigm shift in the study of transnational migration, in particular the emergent interest in the convergence of migration and material culture as the starting point of our investigation. Then it highlights three aspects that this Special Issue could further in the current study of migration and materialities: namely, historical consciousness in materialising migration experiences and the notion of generational transmission; the everyday experience of body as the site for mutual constitution between subject and object; and the unique value of a language-based, interdisciplinary-oriented approach for migration studies. In the final part, it summarizes the four articles that follow, highlighting the contribution that each makes to our overall objective of making a ‘material turn’ in migration studies, and discusses some ways it could be further developed.

Localism as restorative politics; social capital and anti-politics in the London Borough of Burgundia

ABSTRACT The purpose of this paper is to explore the political implications of policies and measures designed to promote “localism”. That is to say, the devolution of power down to a neighbourhood level, as enacted under the 2011 Localism Act. The implementation of localism in London boroughs will be examined. The context is the current concern over disengagement in an era of “anti-politics”, so it is intended to gain an understanding of how localism is interpreted and implemented on the ground. A tentative thesis, of a “restorative politics”, is proposed, such that localism is dynamic and is generating healthy political activity which counters anti-politics in the local community. This could have profound implications for the political parties locally and at Westminster. The extant theories about localism include constructivist interpretations suggesting that a neo-liberal localism is anti-political. This is contested. An emerging narrative heralding a new dawn of empowerment, and related themes concerning social capital, subsidiarity and anti-politics are reviewed. A necessarily empirical approach is adopted in an essentially functionalist frame of reference. There is a review of both academic and policy literature, combined with interviews of professionals involved in localism. This paper is designed to scope a future more substantial piece of research. The conference brief asks; “what scales or levels are appropriate for organising politics in this century”. In a century so far characterised by disillusionment, democratic deficits and abstention, the answer may be; local. The Good Life is lived locally in shared experience and familiar surroundings, hitherto not much amenable to local change. Burgundia is a reference to the film “Passport to Pimlico” (1949), when ABSTRACT The purpose of this paper is to explore the political implications of policies and measures designed to promote “localism”. That is to say, the devolution of power down to a neighbourhood level, as enacted under the 2011 Localism Act. The implementation of localism in London boroughs will be examined. The context is the current concern over disengagement in an era of “anti-politics”, so it is intended to gain an understanding of how localism is interpreted and implemented on the ground. A tentative thesis, of a “restorative politics”, is proposed, such that localism is dynamic and is generating healthy political activity which counters anti-politics in the local community. This could have profound implications for the political parties locally and at Westminster. The extant theories about localism include constructivist interpretations suggesting that a neo-liberal localism is anti-political. This is contested. An emerging narrative heralding a new dawn of empowerment, and related themes concerning social capital, subsidiarity and anti-politics are reviewed. A necessarily empirical approach is adopted in an essentially functionalist frame of reference. There is a review of both academic and policy literature, combined with interviews of professionals involved in localism. This paper is designed to scope a future more substantial piece of research. The conference brief asks; “what scales or levels are appropriate for organising politics in this century”. In a century so far characterised by disillusionment, democratic deficits and abstention, the answer may be; local. The Good Life is lived locally in shared experience and familiar surroundings, hitherto not much amenable to local change. Burgundia is a reference to the film “Passport to Pimlico” (1949), when a London neighbourhood declared independence and its citizens temporarily created the Good Life for themselves. Is the 21st century localism generating a restorative politics?

Contribuição para o conhecimento sobre o efeito da utilização de material pozolânico no fabrico de betão

O presente trabalho, realizado no âmbito da Tese de Mestrado, tem como principal objectivo estudar as características pozolânicas dos materiais da zona de Arganil para substituição parcial do cimento Portland com o objectivo de intensificar certas qualidades devido à diminuição da porosidade do betão. Estas qualidades são interessantes quando se procura maior durabilidade. Para tal, foram realizados diversos ensaios para a caracterização física, química e mineralógica dos produtos. Os metacaulinos utilizados foram obtidos de amostras de argila submetidas a calcinação (750oC, durante uma hora), processo que permitiu a desidroxilação quase total da matéria-prima, transformando esta numa fase amorfa e irreversível, com propriedades pozolânicas. São apresentados os resultados dos ensaios de caracterização da matéria-prima, das condições de calcinação e do produto resultante da desidroxilação, nomeadamente a determinação da pozolanicidade e superfície específica e das características fundamentais para a aplicabilidade do produto. Descreve ainda o emprego do metacaulino em betões de resistência convencional. Estudou-se a influência do emprego do metacaulino (15% de substituição de cimento, em massa) na resistência à flexão e à compressão (aos 28 dias) em argamassas e o emprego de metacaulino (10%, 15% e 20% de substituição de cimento, em massa) na resistência à compressão (3, 7 e 28 dias) no betão.

Aço em varão para betão armado: caracterização do material e enquadramento atual

Dissertação para obtenção do grau de Mestre em Engenharia Civil

Role of abrasive material on micro-abrasion wear tests

Micro-abrasion wear tests with ball-cratering configuration are widely used. Sources of variability are already studied by different authors and conditions for testing are parameterized by BS EN 1071-6: 2007 standard which refers silicon carbide as abrasive. However, the use of other abrasives is possible and allowed. In this work, ball-cratering wear tests were performed using four different abrasive particles of three dissimilar materials: diamond, alumina and silicon carbide. Tests were carried out under the same conditions on a steel plate provided with TiB2 hard coating. For each abrasive, five different test durations were used allowing understanding the initial wear phenomena. Composition and shape of abrasive particles were investigated by SEM and EDS. Scar areas were observed by optical and electronic microscopy in order to understand the wear effects caused by each of them. Scar geometry and grooves were analyzed and compared. Wear coefficient was calculated for each situation. It was observed that diamond particles produce well-defined and circular wear scars. Different silicon carbide particles presented dissimilar results as consequence of distinct particle shape and size distribution.

Problemática associada à utilização de diferentes tipos de mochila para transporte de material escolar

O transporte de cargas é uma tarefa comum para crianças, adolescentes e adultos, pela necessidade de transferência diária de objetos pessoais, livros e artigos de papelaria para os locais de trabalho ou escolas. Diversos autores apontam que o peso carregado durante transporte de material é o principal responsável pelo aparecimento de dor lombar. Deste modo é importante o constante estudo da temática para a definição recomendações e limites. O presente estudo teve como principais objetivos a caraterização da problemática associada à utilização de mochilas e a determinação do Peso Máximo Aceitável (PMA) e do Índice de Esforço Percebido (IEP) para a tarefa de transporte de mochilas, através da abordagem psicofísica. O estudo foi desenvolvido com estudantes do 7º, 8º e 9º ano de escolaridade e, foi dividido em duas fases. Na 1ª fase foram aplicados questionários para a análise da problemática associada à utilização de diferentes tipos de mochilas escolares. Nesta fase, foram incluídos aspetos associados à identificação do tipo de mochila mais utilizada, as rotinas e hábitos dos estudantes e as características da mochila utilizada. Verificou-se que os estudantes utilizam, maioritariamente, a mochila de duas alças para transporte de material escolar. Posteriormente foram efetuadas medições de peso da mochila, altura e peso aos 131 estudantes que constituíram a amostra da 1º fase. O principal objetivo deste ponto foi identificar o tipo de mochila habitualmente utilizada pelos estudantes assim como, o peso transportado nas mochilas. Na 2ª fase foi efetuado um estudo para a determinação do PMA e do IEP, através da abordagem psicofísica, para a tarefa de transporte de mochila, considerando-se uma amostra constituída por 10 estudantes. Para este estudo, apenas foi considerada a mochila mais frequentemente utilizada, identificada na 1º fase. A tarefa consistiu no transporte da mochila nos dois ombros e com as alças devidamente ajustadas ao corpo, num percurso pré-definido, de acordo com o procedimento experimental. Os resultados indicaram que nem todos os estudantes transportam mochilas com pesos dentro das recomendações da Organização Mundial de Saúde. O PMA determinado pelos estudantes foi de 6.8 kg para a mochila de duas alças e a região dos ombros foi identificada durante todo o estudo como sendo a que apresentava maior intensidade de dor durante o transporte da mochila.

GFRP waste reinforced polymer mortars: a new waste management solution for GFRP scrap material

To date, glass fibre reinforced polymer (GFRP) waste recycling is very limited and restricted by thermoset nature of binder matrix and lack of economically viable enduse applications for the recyclates. In this study, efforts were made in order to recycle grinded GFRP waste proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, a mix of powdered and fibrous materials, were incorporated into polyester based mortars as fine aggregate and filler replacements, at different load contents (between 4% up to 12% of total mass) and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Test results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse in concrete-polymer composites.

An experimental study on recycling and reuse of pultruded composite material wastes

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behavior over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials.

Via algaliada versus mudança de bitola dos eixos do material circulante

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil

Oriented Tailoring of Plastic Antibodies for Prostate Specific Antigen and Application of the Imprinted Material as Ionophore in Potentiometric Detection

Prostate Specific Antigen (PSA) is the biomarker of choice for screening prostate cancer throughout the population, with PSA values above 10 ng/mL pointing out a high probability of associated cancer1. According to the most recent World Health Organization (WHO) data, prostate cancer is the commonest form of cancer in men in Europe2. Early detection of prostate cancer is thus very important and is currently made by screening PSA in men over 45 years old, combined with other alterations in serum and urine parameters. PSA is a glycoprotein with a molecular mass of approximately 32 kDa consisting of one polypeptide chain, which is produced by the secretory epithelium of human prostate. Currently, the standard methods available for PSA screening are immunoassays like Enzyme-Linked Immunoabsorbent Assay (ELISA). These methods are highly sensitive and specific for the detection of PSA, but they require expensive laboratory facilities and high qualify personal resources. Other highly sensitive and specific methods for the detection of PSA have also become available and are in its majority immunobiosensors1,3-5, relying on antibodies. Less expensive methods producing quicker responses are thus needed, which may be achieved by synthesizing artificial antibodies by means of molecular imprinting techniques. These should also be coupled to simple and low cost devices, such as those of the potentiometric kind, one approach that has been proven successful6. Potentiometric sensors offer the advantage of selectivity and portability for use in point-of-care and have been widely recognized as potential analytical tools in this field. The inherent method is simple, precise, accurate and inexpensive regarding reagent consumption and equipment involved. Thus, this work proposes a new plastic antibody for PSA, designed over the surface of graphene layers extracted from graphite. Charged monomers were used to enable an oriented tailoring of the PSA rebinding sites. Uncharged monomers were used as control. These materials were used as ionophores in conventional solid-contact graphite electrodes. The obtained results showed that the imprinted materials displayed a selective response to PSA. The electrodes with charged monomers showed a more stable and sensitive response, with an average slope of -44.2 mV/decade and a detection limit of 5.8X10-11 mol/L (2 ng/mL). The corresponding non-imprinted sensors showed smaller sensitivity, with average slopes of -24.8 mV/decade. The best sensors were successfully applied to the analysis of serum samples, with percentage recoveries of 106.5% and relatives errors of 6.5%.