978 resultados para Refinery effluents


Relevância:

10.00% 10.00%

Publicador:

Resumo:

China's water pollution control law stipulates the Water Pollution Discharge Permit (WPDP) institution and authorizes the State Council to draft the regulations for its implementation and enforcement. However, until today, national regulations have not been established and the permitting system has been operating according to provincial regulations. in contrast to USA, the effluents permit system has been operated for more than 40 years and received relatively successful results. The CWA/NPDES experience offers a valuable reference for China’s water permit system.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Aquaculture generates a large load of effluents richin organic matter and nutrients that may be intro-duced into the environment. This study aimed toassess in a microcosm experiment, the effect ofshrimp pond water mixed with Patos Lagoon estuarywater on phytoplankton chlorophyll a and primaryproduction, simulating two salinities. Chlorophyll a,dissolved inorganic nutrients and primary produc-tion were measured in two experiments. In Harvest I,salinity of shrimp pond and environment water wassimilar, and chlorophyll a showed different trendsover time, according to the amount of nitrogen avail-able. In Harvest II, with different salinities and highnutrient concentrations in environment water, chlo-rophyll a levels showed a similar increasing trendover time in all mixtures. Net primary productionshowed differences among treatments in the firstsampling in Harvest I, but not in the second, whereasno differences were observed among treatments inHarvest II. We conclude that shrimp pond effluentcan lead to short-term variations in chlorophyll aand primary production levels, with similar salinities.Salinity differences result in lower chlorophyll a andprimary production values than expected accordingto the nutrient input. Differences in salinity can bean important management strategy to choose thebest harvest period.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This report describes the contribution made by IFREMER in the various stages of installation of a new salmon culture in barge's tanks moored in Morlaix Bay. Tacking into account the opposition to this project, including direct criticism of the role of IFREMER, a considerable effort is made to provide detailed environmental impact data to the appropriate Government office

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Microalgae have a wide range of application fields, from food to fuels, to pharmaceuticals & fine chemicals, aquaculture and environmental bioremediation, among others. Spirulina and Chlorella have been used as food sources since ancient times, due to their high and balanced nutritional value. Our research group in Lisbon has developed a range of food products (emulsions, gelled desserts, biscuits and pastas) enriched with freshwater and marine microalgae (Spirulina, Chlorella, Haematococcus, Isochrysis and Diacronema). The developed products presented attractive and stable colours, high resistance to oxidation and enhanced rheological properties. Some of these products will be prepared at the Post-Congress Course “Functional Foods Development” at the University of Antofagasta. More recently, a great interest has arisen on using microalgae for biofuel production. The same group has also been exploring several marine and freshwater species for biofuel production (e.g., biodiesel, bioethanol, biohydrogen and biomethane) within a biorefinery approach, in order to obtain high and low-value co-products using integral biomass maximizing the energy revenue. Namely, supercritical fluid extraction of Nannochloropsis sp. allowed the recovery of valuable carotenoids and lipids, prior to bioH2 production through dark fermentation of the residual biomass. Also, Scenedesmus obliquus residues after sugars (for bioethanol) and lipids (for biodiesel) extraction has been anaerobically digested attaining high biomethane yields. Regarding sustainability issues, the current trend of our group is now focused on using liquid effluents and high CO2 levels for low cost microalgae growth, contributing to a lower water demand, primary energy consumption and global warming potential by reducing the need for potable water and fertilizers (P, N) and increasing CO2 mitigation. Microalgae biomass has been successfully used for urban wastewater treatment with subsequent bioH2 production, in a biorefinery approach. Presently, ammonium-rich raw effluents from piggeries and poultry industry are being effectively used for microalgae growth avoiding any pre-treatment step.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Several important biomolecules are available into anaerobically digested effluents that were obtained from the biodiesel production process using heterotrophically grown microalga Chlorella protothecoides. Defatted microalgae residues and crude glycerol may undergo anaerobic digestion, separately and in admixture, providing methane/hydrogen and a digestate exploitable for agriculture applications. Furthermore, industrial interesting bioactive compounds such as polyphenols provided with antioxidant activity can be obtained. Anaerobic process offers a promising chance and can be advantageously combined with algae lipid-extraction techniques in order to make it more sustainable.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The main aim of this study was to evaluate the impact of the urban pollution plume from the city of Manaus by emissions from mobile and stationary sources in the atmospheric pollutants concentrations of the Amazon region, by using The Weather Research and Forecasting with Chemistry (WRF-Chem) model. The air pollutants analyzed were CO, NOx, SO2, O3, PM2.5, PM10 and VOCs. The model simulations have been configured with a grid spacing of 3 km, with 190 x and 136 y grid points in horizontal spacing, centered in the city of Manaus during the period of 17 and 18 of March 2014. The anthropogenic emissions inventories have gathered from mobile sources that were estimated the emissions of light and heavy-duty vehicles classes. In addition, the stationary sources have considered the thermal power plants by the type of energy sources used in the region as well as the emissions from the refinery located in Manaus. Various scenarios have been defined with numerical experiments that considered only emissions by biogenic, mobile and stationary sources, and replacement fuel from thermal power plant, along with a future scenario consisting with twice as much anthropogenic emissions. A qualitative assessment of simulation with base scenario has also been carried out, which represents the conditions of the region in its current state, where several statistical methods were used in order to compare the results of air pollutants and meteorological fields with observed ground-based data located in various points in the study grid. The qualitative analysis showed that the model represents satisfactorily the variables analyzed from the point of view of the adopted parameters. Regarding the simulations, defined from the base scenarios, the numerical experiments indicate relevant results such as: it was found that the stationary sources scenario, where the thermal power plants are predominant, resulted in the highest concentrations, for all air pollutants evaluated, except for carbon monoxide when compared to the vehicle emissions scenario; The replacement of the energy matrix of current thermal power plants for natural gas have showed significant reductions in pollutants analyzed, for instance, 63% reductions of NOx in the contribution of average concentration in the study grid; A significant increase in the concentrations of chemical species was observed in a futuristic scenario, reaching up to a 81% increase in peak concentrations of SO2 in the study area. The spatial distributions of the scenarios have showed that the air pollution plume from Manaus is predominantly west and southwest, where it can reach hundreds of kilometers to areas dominated by original soil covering.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dissertação submetida à Universidade de Lisboa, Faculdade de Ciências para a obtenção do Grau de Mestre em Microbiologia Aplicada.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The main issues related to water conservation in urban centers are the increase in water supply cost, demand growth, pollution and differences in the distribution of water resources. Water conservation, the controlled and efficient use of water, includes both measures as reasonable means of water reuse. Thus, conservation practices are an effective way to meet demand and supply water to new activities and users without jeopardizing the supplying water bodies and preserving the natural environment. This study aims to examine the water management of a shopping mall and the use of rainwater harvesting combined with greywater reuse. For buildings in general, water loss is common due to leaks in the hydraulic and restroom equipment. These losses, which are caused by a high volume of water used and wasted in the system, are often the result of design errors, incorrect maintenance procedures and users' bad habits In southern Brazil, where there is rainfall almost all year long, water shortages occasionally occur, particularly in some winter mouths. One difficulty that appears on rainwater studies is the proper determination of rainwater volume that can be used to address water supply systems. In this work, the simulation method was used to determine this volume. Thus, simulations with the following variables: rainfall, catchment area and water consumption were performed. For mall's hydraulic systems, segmented alternatives are adopted. That is, focusing on the use of rainwater or greywater reuse. Other alternatives of effluent reuse have been slightly discussed due to sanitary issues, those are effluents from toilets and kitchen sinks. The adoption of greywater may be feasible if there is a significant flow of greywater to comply water demand for toilet flushing. The inspections made in this study found that the quantity of sinks was insufficient to supply an adequate amount of water to toilets and urinals. The greywater reuse system was found to be infeasible in terms of demand and supply of water. Conversely, the rainwater harvesting system was entirely feasible and easily supplied water to all restrooms and contributed to the cooling of the air conditioning system with a short payback period. One of the challenges of this work was the need to compare the actual water consumption with a water consumption parameter used in buildings. Thus, a method that addresses the generation of specific consumption indexes for specific activity (like a mall) was used. The water consumption indices showed that this mall has a satisfactory water management program.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Nesta dissertação foi demostrada a potencialidade da cianobactéria Aphanothece microscopica Nägeli em cultivo heterotrófico para remover fósforo do efluente de laticínio, bem como o efeito da temperatura no bioprocesso. Para tanto o trabalho é composto por dois artigos. O primeiro intitula-se “Influência da temperatura na remoção de fósforo por Aphanothece microscopica Nägeli em biorreatores heterotróficos”, e teve por objetivo avaliar a eficiência da cianobactéria em remover heterotroficamente fósforo total dissolvido do efluente de processamento de laticínios. A análise dos resultados mostrou que a remoção de fósforo é independente de sua concentração no sistema, porém depende fortemente da temperatura. Ficou demostrado, que a remoção é altamente sensível a temperatura principalmente no intervalo de 10ºC – 20ºC e nessas condições a operacionalidade do biorreator deverá ser ajustada para manutenção da eficiência do processo. O segundo artigo tem como título “Dinâmica de remoção de fósforo por Aphanothece microscopica Nägeli em biorreatores heterotróficos” e avaliou a remoção das formas de fósforo reativo, fósforo hidrolisável, fósforo total e fósforo orgânico, total e dissolvida, bem como de DQO e NNTK nas temperaturas de 10ºC, 20ºC e 30ºC em 24 h, a fim de investigar a dinâmica de remoção de diferentes formas de fósforo do efluente de laticínio em biorreatores heterotróficos. Foi possível concluir que a fração de fósforo predominante no efluente de laticínio foi a orgânica dissolvida, seguida de fósforo reativo dissolvido. A cianobactéria foi capaz de remover formas simples de fósforo, como reativo e complexas, fósforo hidrolisável e orgânico, bem como DQO e N-NTK. No que se refere ao fósforo suspenso, foi verificado que as frações de fósforo orgânico suspenso e fósforo suspenso total apresentaram baixa remoção. Foi observado que no intervalo de 20ºC a 30ºC foi registrado o maior desempenho quanto à remoção de fósforo para um tempo de detenção hidráulica de 16 h. Nos experimentos realizados à temperatura de 20ºC foram registrados os melhores valores cinéticos resultando em uma máxima concentração celular de 0,84 g.L-1, velocidade máxima de crescimento de 8,64 dias-1 e produtividade de 3,85 g.L-1. dia-1. Assim, a análise dos resultados permite concluir que a remoção de fósforo, DQO e N-NTK em condições heterotróficas por Aphanothece microscopica Nägeli é rota em potencial para o tratamento de efluente de laticínio.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The release of nitrogen compounds in water bodies can result in many environmental problems, so treat wastewater, such as sewage in order to remove not only organic matter but also nitrogen has been studied a few decades. From the above, the objective of this study was to evaluate the performance of a structured bed reactor, continuous flow, with recirculation, in removing organic matter and nitrogen present in wastewater under different cycles of intermittent aeration (AI) and to evaluate the influence of these cycles in the development of nitrifying bacteria (Oxidizing Bacteria Ammonia - BOA and Bacteria Oxidizing Nitrite - BON) and denitrifying (DESN) adhered (Support Material - MS) and suspension (Effluent - EF and sludge - LD). The reactor used has usable volume of 9.4 L. As support materials (MS) polyurethane foam was used, cut and fixed in PVC rods. 3 were worked aeration phases (AE) and non-aeration (AN) at different stage: Stage 1 (4 h EA / AN 2H); Stage 2 (2H EA / AN 1 h) and Phase 3 (2H EA / AN 2 h). During all hydraulic detention time phases was kept at 16 h and the effluent recirculated at a rate of 3 times the inflow. Were analyzed: pH, total alkalinity, temperature, chemical oxygen demand (COD), Biochemical Oxygen Demand (BOD), nitrogen Kjeldhl Total (NKT), ammonia-N-N-NH4+, nitrito-N-NO2+andnitrato-NO3-. The concentration of BOA, BON and DESN was determined using the number More Provável.gSSV-1 (NMP.gSSV-1). In phase 1 the percentage removal NTK N-NH4+ and NT was 76±10%, 70±21% and 67±10% respectively. In Phase 2 80±15% of removel NKT, 86±15% of N-NH4+ e 68±9% of removel NT e na Fase 3 de 58±20%, 72±28% and 41±6% of NKT, N-NH4+ of NT, respectively. The denitrification efficiency in stage 3 was over 70%, indicating that occurred in the reactor the process of simultaneous nitrification and denitrification (NDS). DQOT the removal percentages were 88 ± 4% in Phase 1, 94 ± 7 in Phase 2 and 90± 11% in Phase 3. The multivariate ANOVA applied to NMP.gSSV-1, it indicated that there was significant (F: 20,2, p <0,01) between the analyzed concentration of organisms AI in different cycles, but the differences between NMP.gSSV-1 depends not only isolated factors but of which means, and phase groups being analysis. From the results it is concluded that the working system is efficient in terms of nitrogen removal and organic matter, and that the stage with the highest availability of Dissolved Oxygen (DO) and C/N ratio (Step 2), was the one obtained the lower concentrations of organic matter effluents and N-NH4+. Hinted that there was a significant difference between the concentration (NMP.100mL-1) of the analyzed organizations (BOA, BON and DESN), but this difference does not depend on factors alone but of which means (MS, EF or LD), stages (1, 2 or 3) and groups (BOA, BON and DESN) is being considered.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Os estudos de adsorção de corantes alimentícios de soluções aquosas geralmente estão voltados para a remoção de um corante específico, porém, as misturas binárias são mais realistas para simular efluentes industriais. A adsorção de corantes com quitosana é considerada uma tecnologia alternativa eco amigável, e quando a estrutura da quitosana é modificada quimicamente, resulta em um adsorvente mais adequado. A reticulação da quitosana com cianoguanidina apresenta vantagens, como melhoria na estabilidade em soluções ácidas e diminuição do custo do adsorvente. Nesta pesquisa, o objetivo do trabalho foi modificar a quitosana com cianoguanidina para remoção de corantes alimentícios em sistema aquoso binário. A fim de verificar o comportamento dos adsorventes na operação de adsorção, foram preparadas amostras de quitosana com diferentes graus de desacetilação (75%, 85% e 95%), e após, foram realizadas modificações destas amostras com cianoguanidina. Os adsorventes foram caracterizados e aplicados para a adsorção de azul indigotina e amarelo tatrazina em sistema aquoso binário e em sistema simples. O efeito do pH e do grau de desacetilação foram verificados para a remoção dos corantes por quitosana com e sem modificação em sistema simples e binário. Curvas de equilíbrio foram obtidas em diferentes temperaturas e o modelo estendido de Langmuir foi ajustado aos dados experimentais. O comportamento cinético foi avaliado através dos modelos pseudo-primeira ordem, pseudo-segunda ordem e Avrami. Os parâmetros termodinâmicos foram determinados e estudos de dessorção do adsorvente foram realizados. O pH mais adequado foi 3, e o melhor grau de desacetilação foi 95% para ambos os sistemas aquosos e adsorbatos. As capacidades de adsorção da quitosana sem e com modificação não apresentaram diferença significativa. O modelo de Langmuir estendido apresentou ajuste adequado às curvas de equilíbrio e as máximas capacidades de adsorção foram 595,3 e 680,0 mg g-1, obtidas à 25ºC, para o os corantes azul indigotina e amarelo tatrazina, respectivamente. O modelo de Avrami foi o que melhor se ajustou aos dados cinéticos de adsorção. A dessorção do adsorvente foi possível por dois ciclos, mantendo sua capacidade de adsorção em 209,7 mg g-1 no primeiro ciclo e 200,2 mg g-1 no segundo ciclo. A quitosana modificada com cianoguanidina apresentou-se como um adsorvente promissor para a remoção de corantes alimentícios em sistema binário.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The integrated culture of seaweed and aquatic animals is an ancient practice in Asian countries. The expansion of this practice to western countries is consequence of the recognition of this system as a sustainable alternative that allows economical diversification and mitigation of environmental impacts generated by effluents of aquaculture. This study evaluated the growth of the seaweed Gracilaria caudata and of the shrimp Litopenaeus vannamei in monoculture (shrimps) and integrated culture (shrimps and algae) systems, and accessed the effect of the seaweed in the water quality. There were two treatments in the experiment: monoculture (shrimps) and integrated culture (shrimps/ algae). The organisms were cultured in 6 aquaria (10L) filled with seawater (35.0±0.0 PSU and 28.1±0.4°C) for 28 days. The nutrients of water (PO43-, NH4+, NO2-, NO3- and DIN), the biomass and the relative growth rate (RGR, % day-1) of seaweed and shrimps were measured weekly. The parameters pH, temperature, salinity and dissolved oxygen were measured daily. The concentration of NH4+ in integrated culture (62.8±25.2µM) was lower (Mann-Whitney p<0.001) than in monoculture (85.6±24.3µM). The mean of PO4- in monoculture (10.4±4.6µM) was markedly higher (Mann-Whitney; p=0.024) than that in integrated culture (8.7±4.1µM). The level of dissolved oxygen in integrated culture (6.0±0.6mg/L) was higher (t-Student; P=0.014) than that in shrimp monoculture (5.8±0.6mg/L). The mean values of the parameters pH, NO2-, NO3- and DIN were 7.5±0.2, 10.1±12.2µM, 24.5±3.2µM and 120.17±30.76µM in monoculture, and 7.5±0.2, 10.5±13.2µM, 27.4±3.5µM and 100.76±49.59µM in integrated culture. There were not differences in these parameters between treatments. The biomass and RGR of seaweed reached 15.0±1.9g and 7.4±2.8% day-1 at the end of the experiment. The performance of shrimp was favorable in monoculture (1.5±0.8g; 5.7±1.6% dia-1) and in integrated culture (1.5±0.7g; 5.2±1.2% dia-1), and the rate of survival was 100% in both treatments. The tolerance and favorable performance of Gracilaria caudata suggest that this seaweed might be integrated into shrimp (Litopenaeus vannamei) culture systems

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Spent hydroprocessing catalysts (HPCs) are solid wastes generated in refinery industries and typically contain various hazardous metals, such as Co, Ni, and Mo. These wastes cannot be discharged into the environment due to strict regulations and require proper treatment to remove the hazardous substances. Various options have been proposed and developed for spent catalysts treatment; however, hydrometallurgical processes are considered efficient, cost-effective and environmentally-friendly methods of metal extraction, and have been widely employed for different metal uptake from aqueous leachates of secondary materials. Although there are a large number of studies on hazardous metal extraction from aqueous solutions of various spent catalysts, little information is available on Co, Ni, and Mo removal from spent NiMo hydroprocessing catalysts. In the current study, a solvent extraction process was applied to the spent HPC to specifically remove Co, Ni, and Mo. The spent HPC is dissolved in an acid solution and then the metals are extracted using three different extractants, two of which were aminebased and one which was a quaternary ammonium salt. The main aim of this study was to develop a hydrometallurgical method to remove, and ultimately be able to recover, Co, Ni, and Mo from the spent HPCs produced at the petrochemical plant in Come By Chance, Newfoundland and Labrador. The specific objectives of the study were: (1) characterization of the spent catalyst and the acidic leachate, (2) identifying the most efficient leaching agent to dissolve the metals from the spent catalyst; (3) development of a solvent extraction procedure using the amine-based extractants Alamine308, Alamine336 and the quaternary ammonium salt, Aliquat336 in toluene to remove Co, Ni, and Mo from the spent catalyst; (4) selection of the best reagent for Co, Ni, and Mo extraction based on the required contact time, required extractant concentration, as well as organic:aqueous ratio; and (5) evaluation of the extraction conditions and optimization of the metal extraction process using the Design Expert® software. For the present study, a Central Composite Design (CCD) method was applied as the main method to design the experiments, evaluate the effect of each parameter, provide a statistical model, and optimize the extraction process. Three parameters were considered as the most significant factors affecting the process efficiency: (i) extractant concentration, (ii) the organic:aqueous ratio, and (iii) contact time. Metal extraction efficiencies were calculated based on ICP analysis of the pre- and post–leachates, and the process optimization was conducted with the aid of the Design Expert® software. The obtained results showed that Alamine308 can be considered to be the most effective and suitable extractant for spent HPC examined in the study. Alamine308 is capable of removing all three metals to the maximum amounts. Aliquat336 was found to be not as effective, especially for Ni extraction; however, it is able to separate all of these metals within the first 10 min, unlike Alamine336, which required more than 35 min to do so. Based on the results of this study, a cost-effective and environmentally-friendly solventextraction process was achieved to remove Co, Ni, and Mo from the spent HPCs in a short amount of time and with the low extractant concentration required. This method can be tested and implemented for other hazardous metals from other secondary materials as well. Further investigation may be required; however, the results of this study can be a guide for future research on similar metal extraction processes.