As geometrias urbana e isoperimétrica: uma alternativa de uso em sala de aula

The main goal of the present study is to propose a methodological approach to the teaching of Geometry and, in particular, to the construction of the concepts of circle (circumference) and ellipse by 7th and 8th grade students. In order to aid the students in the construction of these concepts, we developed a module based on mathematical modeling, and both Urban Geometry (Taxicab Geometry) and Isoperimetric Geometry. Our analysis was based on Jean Piaget's Equilibrium Theory. Emphasizing the use of intuition based on accumulated past experiences, the students were encouraged to come up with a hypothesis, try it out, discuss it with their peers, and derive conclusions. Although the graphs of circles and ellipses assume different shapes in Urban and Isoperimetric Geometry than they do in the standard Euclidian Geometry, their definitions are identical regardless of the metric used. Thus, by comparing the graphs produced in the different metrics, the students were able to consolidate their understanding of these concepts. The intervention took place in a series of small group activities. At the end of the study, the 53 seventh grade and the 55 eighth grade students had a better understanding of the concepts of circle and ellipse

Percepção do pai sobre sua presença no nascimento do filho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Concepções de policiais militares sobre cuidados com a saúde

A ausência de cuidados do homem com a saúde representa um fenômeno significativo, pois contribui para o aumento da morbidade e mortalidade masculina por causas evitáveis. Essa realidade torna-se mais relevante quando se trata do policial militar, devido às peculiaridades do seu processo de trabalho. Visto isso, considera-se que os cuidados de saúde adotados por policiais militares atrelam-se ao entendimento de que possuem sobre os agravos à saúde, o qual perpassa por concepções de gênero e da profissão. Isso levou ao seguinte questionamento: Como o policial militar concebe os cuidados com a saúde. Objetivou-se analisar concepções de policiais militares sobre cuidados com a saúde. Trata-se de um estudo exploratório e descritivo, com abordagem qualitativa, desenvolvido junto a um Batalhão Militar do Comando de Policiamento de Natal, Rio Grande do Norte, Brasil. A coleta de dados foi realizada no período de junho a julho de 2013. Essa etapa foi antecedida pela anuência do Comandante Geral da Polícia Militar do Rio Grande do Norte, sob a aprovação do Comitê de Ética em Pesquisa da Universidade Federal do Rio Grande do Norte, com o CAAE nº 15449713.7.0000.5537, e autorização formal dos entrevistados mediante a assinatura do Termo de Consentimento Livre e Esclarecido (TCLE), atendendo às exigências da Resolução 466/2012, do Conselho Nacional de Saúde, no que se refere à pesquisa com seres humanos. Participaram do estudo 21 policiais militares, do sexo masculino, que trabalhavam no policiamento ostensivo, não estavam de licença médica e apresentaram condições psicológicas e/ou físicas favoráveis para responder aos questionamentos. Os dados foram coletados por meio de entrevista semiestruturada mediante um roteiro constituído de duas partes: a primeira com questões sociodemográficas com vistas à caracterização dos participantes da pesquisa e a segunda com duas questões norteadoras relativas ao objeto de estudo. Os depoimentos foram tratados conforme o método de análise de conteúdo na modalidade de análise temática segundo Bardin. Desse processo, emergiram três categorias: hábitos de vida de policiais militares, repercussão do trabalho na saúde de policiais militares e atitudes de policiais militares em frente dos problemas de saúde. A análise dos dados foi subsidiada pelo referencial teórico do Modelo de Crenças em Saúde (Health Belief Model), de acordo com as variáveis vulnerabilidade e barreiras . Para respaldar a discussão dos resultados, buscou-se na literatura conhecimentos acerca da saúde do homem e do policial militar. Os resultados apontaram que os entrevistados procuram cuidar da saúde com práticas de exercícios físicos, alimentos saudáveis e preservação do sono. No entanto, vivenciam dores de coluna, ganho de peso, dificuldades para dormir, estresse e sofrimento psicológico. Diante disso, eles buscam apoio quando acometidos por agravos à saúde e reconhecem a necessidade de medidas de segurança durante o serviço. Portanto, notam a sua condição de vulnerabilidade em decorrência de seu ofício, porém enfrentam dificuldades na adoção de práticas preventivas de agravos a saúde. Mediante os resultados, faz-se necessário que o enfermeiro atuante junto a este público elabore, implemente e acompanhe estratégias de atenção a sua saúde

A construção da ponte metálica sobre o Rio Pontengi: aspectos históricos, construtivos e de durabilidade - Natal/RN, Brasil (1912-1916) - estudo de caso

It is a case study that reports the construction of metal truss bridge in the river Potengi in Natal, Rio Grande do Norte, between the years 1912 and 1916. From testimonials on steel bridges in Brazil and worldwide including foundations. Documentary research from procurement of projects and contracts was performed. A chronology of construction, with a description of the equipment used and its original budget with the Brazilian government. Still, we used interviews and surveys with experimental sampling / testimonies, laboratory tests. This study aims to analyze historically and technically the Bridge over the River Potengi, emphasizing primarily the construction process, the qualities and characteristics of the materials used and the technological, chemical, mineralogical and microstructural properties of cement and concrete used in its construction. Taking as conclusions that cements pozolônicos ensured a good durability to the concrete in a hundred-year period and that the solution employed with the compressed air caissons was right

Genetic parameter estimates for buffalo milk yield, milk quality and mozzarella production and Bayesian inference analysis of their relationships

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estimation of genetic parameters for body weights, scrotal circumference, and testicular volume measured at different ages in Nellore cattle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Uso da internet em ambiente acadêmico :estudo com docentes em institruição de educação tecnológica no Brasi

The last decade, characterized by the vertiginous growth of the computers worldwide net, brought radical changes in the use of the information and communication. Internet s use at business world has been largely studied; however, few are the researches about the academic use of this technology, mainly if we take into consideration institutions of technologic education. In this context, this research made an analysis of internet s use in a technologic education institution in Brazil, analyzing, in particular, the Centro Federal de Educação Tecnológica do Rio Grande do Norte CEFET/RN for that standard use of this Information Technology (IT) tools and, at the same time, studying the determinant factors of this use. To reach the considered objectives, a survey research was effected, be given data collected daily through the research s questionnaire application to 150 teachers who answered a set of closed and scaled questions. The quantitative data were qualitatively analyzed, arriving a some significant results related to the standard use and the factors that influenced in the use of these Internet technologies, like: the age scale, the exposition s to the computer level, the area of academic graduation, the area of knowledge where acts and the title, exert significant influence in the academic use of Internet between the professors

Avaliação da potencialidade de argilas de queima clara como matérias-primas para o desenvolvimento de novos produtos cerâmicos

The industries of structural ceramics are among the most important production chains in the state of Rio Grande do Norte. The industry and other interest groups to target the replacement of firewood by natural gas. Studies accordingly concluded that simple change does not guarantee products of superior quality, and that the increase in spending on fuel can economically cripple the use of gas for burning the majority of products manufactured by that action. However some proposals of innovations in terms of process and product are being studied in an attempt to justify the use of natural gas in industry, structural ceramics. One of the aspects investigated is the development of ceramic products differentiated, with new designs and greater value added. Inserted in that context, this paper aims to investigate the potential use of clay-firing clear fabrication of the "bricks of apparent joins drought", a new ceramic product with an innovative way. The development of the work was done in three stages. In the initial stage was held the characterization of raw materials, sought information on physical, chemical, mineralogical and mechanical samples. In the second stage five bodies were made using two of the nine ceramic clay characterized the first step. The masses were analyzed and compared with respect to the size distribution, plasticity and technological properties. In the last part of this work was carried out tests on massive bricks manufactured on an industrial scale. The results show that the nine clays can be used in the manufacture of new ceramic products, is the only constituent of mass ceramic or by mixing with other(s) clay(s

Obtenção de placas cerâmico a partir de formulações de massas triaxiais de resíduos de caulim, chamote de telha e cinza vegetal

The production of red ceramic is an industrial activity that causes an intense impact. The manufacture of its products considerably increases the demand for natural resources, mainly with the extraction of raw material. The ceramic material produced generates waste, such as ash firewood and chamote. The residue from the beneficiation of kaolin is deposited in a poor, degrades the environment and contaminate water sources and soil, constituting in this manner, ecological disasters. The main objective of this work is to develop the formulation of a ceramic product consisting solely of industrial solid wastes, from ceramic tiles, (chamote) residue of kaolin and ash firewood. It is assumed that this product made in the laboratory can be used in coatings, wall and floor. The aim is to facilitate the replacement of the raw material of original composition of a ceramic body, for waste, while the process of production equal to the conventionally used, so that the properties of the product are reproduced. This work is characterized waste as its chemical composition, analysis of particle size, X-ray diffraction and thermal behavior. Several formulations were studied. The mass of waste was prepared by dry process, pressed to 25 MPa, and then burned in muffle type oven to 850, 950, 1050 and 1150 °C. The results showed that it is technically possible to produce porous tiles only with waste. It was found that the formulations of bodies play a key role in the properties of the final product, as well as the sintering temperature and heating rates. RN in the waste of kaolin is estimated at 15,000 t/month, about 3,000 gray t/month and chamote with 10 million pieces/month damaged. The presence of carbonates of calcium and magnesium at 1050 ° C results in an appropriate porosity and mechanical strength. The formulation M3JE, composed of 69% waste of kaolin, 7.7% and 23.3% of chamote of gray, became suitable for porous materials with the strength and absorption within the level of national and international standards

Obtenção e caracterização de um compósito de poliuretano de mamona e pó de vidro para aplicações em insolantes térmicos

Thermal insulation is used to protect the heated or cooled surfaces by the low thermal conductivity materials. The rigid ricin polyurethane foams (PURM) are used for thermal insulation and depend on the type and concentration of blowing agent. Obtaining PURM occurs by the use of polyol, silicone, catalyst and blowing agent are pre -mixed, reacting with the isocyanate. The glass is reusable, returnable and recyclable heat insulating material, whose time of heat dissipation determines the degree of relaxation of its structure; and viscosity determines the conditions for fusion, operating temperatures, annealing, etc. The production of PURM composites with waste glass powder (PV) represents economical and renewable actions of manufacturing of thermal insulating materials. Based on these aspects, the study aimed to produce and characterize the PURM composites with PV, whose the mass percentages were 5, 10, 20, 30, 40 and 50 wt%. PURM was obtained commercially, while the PV was recycled from the tailings of the stoning process of a glassmaking; when the refining process was applied to obtain micrometer particles. The PURM + PV composites were studied taking into account the standard sample of pure PURM and the influence of the percentage of PV in this PURM matrix. The results of the chemical, physical and morphological characterization were discussed taking into account the difference in the microstructural morphology of the PURM+PV composites and the pure PURM, as well the results of the physicochemical, mechanical e thermophysical tests by values obtained of density, hardness, compressive strength, specific heat, thermal conductivity and diffusivity. In general, the structure of pure PURM showed large, elongated and regular pores, while PURM+PV composites showed irregular, small and rounded pores with shapeless cells. This may have contributed to reducing their mechanical strength, especially for PURM - PV50. The hardness and density were found to have a proportional relationship with the PV content on PURM matrix. The specific heat, thermal diffusivity and thermal conductivity showed proportional relationship to each other. So, this has been realized that the increasing the PV content on PURM matrix resulted in the rise of diffusivity and thermal conductivity and the decrease of the specific heat. However, the values obtained by the PURM composites were similar the values of pure PURM, mainly the PURM-PV5 and PURM-PV10. Therefore, these composites can be applied like thermal insulator; furthermore, their use could reduce the production costs and to preserve the environment

Construção e avaliação térmica de um fogão solar tipo caixa

The present work presents a contribution in the study of modelings of transference of heat for foods submitted to the experimental tests in the considered solar oven, where the best modeling for the beefburger of chicken in study was evaluated, comparing the results, considering this food as a half-infinite(1er object considered model) and,after that, considered the chicken beefburger as a plain plate in transient regimen in two distinct conditions: not considering and another model considering the contribution of the generation term, through the Criterion of Pomerantsev. The Sun, beyond life source, is the origin of all the energy forms that the man comes using during its history and can be the reply for the question of the energy supplying in the future, a time that learns to use to advantage in rational way the light that this star constantly special tax on our planet. Shining more than the 5 billion years, it is calculated that the Sun still in them will privilege for others 6 billion years, or either, it is only in the half of its existence and will launch on the Earth, only in this year, 4000 times more energy that we will consume. Front to this reality, would be irrational not to search, by all means technical possible, to use to advantage this clean, ecological and gratuitous power plant. In this dissertation evaluate the performance of solar cooker of the type box. Laboratory of Solar Energy of the Federal University of the Great River of North - UFRN was constructed by the group (LES) a model of solar stove of the type box and was tested its viability technique, considering modeling foods submitted when baking in the solar oven, the cooker has main characteristic the easiness of manufacture and assembly, the low cost (was used material accessible composition to the low income communities) and simplicity in the mechanism of movement of the archetype for incidence of the direct solar light. They had been proposals modeling for calculations of food the minimum baking time, considering the following models of transference of heat in the transient state: object the halfinfinite, plain plate and the model of the sphere to study the necessary temperature for the it bakes of bread (considering spherical geometry). After evaluate the models of transmission of heat will be foods submitted you the processes of to it bakes of, the times gotten for the modeling with the experimental times of it bakes in the solar oven had been compared, demonstrating the modeling that more good that it portraies the accuracies of the results of the model

Acúmulo e distribuição de boro em cultivares de algodão

O algodoeiro é responsivo à adubação boratada, porém há poucas e controversas observações a respeito da mobilidade do nutriente dentro da planta. Este trabalho teve por objetivo avaliar a translocação e o acúmulo de boro (B) em cultivares de algodão. Quatro cultivares de algodão (FM 993, FM 910, FMT 701 e FMT 523) foram cultivadas em duas concentrações de B (0 e 4,5 mmol L-1) na solução nutritiva, em vasos com capacidade de 8 L preenchidos com areia lavada, por seis semanas. Os vasos receberam solução nutritiva uma vez por semana. em seguida, as plantas foram amostradas durante quatro semanas consecutivas, determinando-se a matéria seca e acúmulo total de B nas raízes e na parte aérea, a distribuição e acúmulo de B nos tecidos da planta e o teor e acúmulo de B nas folhas em diferentes nós da haste principal. O delineamento experimental foi em blocos ao acaso, em esquema fatorial 4 x 2, com parcelas subdivididas no tempo (semanas de amostragem), com quatro repetições. As cultivares FM 993 e FMT 523 alcançaram maior produção de matéria seca e acúmulo de B na raiz. Plantas cultivadas sem deficiência de B acumulam mais de 50 % do B nas folhas, ao passo que, em plantas sem aplicação do micronutriente, o B se encontra em maior proporção nas raízes e no caule. Não há evidência de translocação de B em diferentes cultivares de algodão, mesmo quando cultivadas em deficiência desse nutriente.

Número de ramos na produção de figos verdes 'Roxo de Valinhos' no oeste do Paraná

O presente trabalho teve por objetivo verificar o efeito do número de ramos produtivos sobre o desenvolvimento e a produção de figos verdes 'Roxo de Valinhos'. O experimento foi conduzido com plantas de quatro anos de idade, em sistema de produção orgânica, espaçamento 2 x 3 m, de julho de 2007 a fevereiro de 2008, em Quatro Pontes-PR. Os tratamentos consistiram em plantas conduzidas com 6; 9; 12; 15; 18 e 21 ramos produtivos. Utilizou-se o delineamento experimental de blocos ao acaso, com quatro blocos e três plantas úteis por parcela. No sistema de produção orgânica, as maiores estimativas de produção e produtividade de figos verdes foram obtidas em plantas conduzidas com 21 ramos.

Sistema desponte na produção de figos verdes 'Roxo de Valinhos'

O objetivo deste trabalho foi estudar o efeito do sistema desponte sobre o desenvolvimento e a produção de figos verdes 'Roxo de Valinhos'. O experimento utilizando plantas de quatro anos de idade, com espaçamento 3 x 2m, foi conduzido de julho de 2007 a março de 2008, em Quatro Pontes, Paraná (PR). O delineamento utilizado foi em blocos ao acaso, com quatro blocos, e os tratamentos foram arranjados em fatorial 2 x 5, tomando por fatores o número de ramos produtivos (plantas conduzidas com seis ou 12 ramos) e o número de despontes (um, dois, três ou quatro, além do controle sem desponte). No sistema desponte, após a emissão da 16a folha, o ramo foi despontado (gema apical removida), selecionando-se duas brotações por ramo produtivo. Novos despontes foram realizados posteriormente, sempre após a emissão da sexta folha. em cada parcela, constituída de três plantas úteis, foram coletados dados no ciclo de produção 2007/08. A maior produção (2.208,87g planta-1) e produtividade estimada (3.681,19kg ha-1) observada de figos verdes foram obtidas quando as plantas foram conduzidas com 12 ramos produtivos, efetuando-se três despontes.

Interferência do hipoclorito de sódio na absorção de macro e micronutrientes nas culturas da soja e do feijão

The objective of this work was to evaluate the effect of the sodium hypochlorite application in different levels in the fresh and dry biomass and in the uptake of macronutrients and micronutrients in plants of soybean and bean. The experiments were carried at the greenhouse of the "Departamento de Recursos Naturais/Ciência do Solo, FCA/UNESP, Botucatu/SP", in columns of rigid PVC with capacity to 1.0 liter of soil. The experimental design used in each experiment was entirely randomized, with 4 replications. The treatments in each experiment were constituted of 5 doses of sodium hypochlorite (0.0, 0.5, 1.0, 2.0 and 4.0 L ha(-1)). The following parameters were evaluated: fresh and dry biomass, macro and micronutrients contents in the plants leaves. The levels of sodium hypochlorite did not reflect significantly on the fresh and dry biomass of soybean and bean. The soybean dry biomass presented significant difference among the level of sodium hypochlorite. Average contents of macro and micronutrients obtained in bean leaves were not affected by the levels of sodium hypochlorite. The sulphur contents in soybean leaves presented significant difference. The sodium hypochlorite did not affect negatively the macro and micronutrients contents in leaves of soybean and bean.