961 resultados para MEXICAN LIME
Resumo:
A reciclagem de resíduos apresenta-se como uma alternativa adequada com relação à preservação dos recursos naturais e do meio ambiente. As escórias de aciaria são resíduos siderúrgicos originados na fabricação do aço, e são geradas em grandes quantidades. Estes resíduos são estocados nos pátios siderúrgicos, onde permanecem, na sua maioria, sem qualquer destino. Normalmente, as escórias de aciaria são volumetricamente instáveis, apresentando características expansivas, e por esta razão, a aplicação das mesmas em materiais de construção torna-se restrita. Esta pesquisa tem como objetivo estudar a viabilidade técnica do uso das escórias de aciaria LD como adição em cimentos, propondo um método de estabilização por meio de granulação por resfriamento brusco destas escórias, buscando, desta forma, a eliminação do fenômeno da expansão, e visando a melhoria das características destes resíduos. No processo de estabilização, a escória líquida foi granulada em uma usina siderúrgica. Estudos complementares de granulação foram realizados nos laboratórios da UFRGS, empregando-se escórias refundidas. A granulação por resfriamento brusco favoreceu a redução do CaOlivre, a eliminação do MgO na forma de periclásio, e a eliminação do bC2S das escórias, considerados agentes causadores da expansão. No entanto, a elevada basicidade da escória LD dificulta a formação da estrutura vítrea e a separação da fração metálica após o resfriamento brusco. Foram realizados ensaios de expansão das escórias, atividade pozolânica, e resistência mecânica de argamassas com escórias granuladas. O resfriamento brusco proporcionou a eliminação da expansão e o desenvolvimento das propriedades pozolânicas/cimentícias da escória granulada. Como adição em cimentos, do ponto de vista da resistência mecânica, as argamassas compostas com escórias granuladas e clínquer apresentaram níveis de resistência à compressão axial compatíveis com as especificações referentes ao cimento Portland composto, apesar destes resultados serem inferiores aos obtidos para as argamassas de referência.
Resumo:
Neste trabalho foi estudado o comportamento de fundações superficiais apoiadas em sistema de dupla camada, quando a superior é cimentada. O estudo consistiu-se de três etapas, chamadas de Etapa de Laboratório, Etapa Numérica e Etapa de Campo. Na Etapa de Laboratório foi verificada a viabilidade técnica de utilizar os resíduos industriais cinza pesada e cal de carbureto na estabilização de um solo residual de arenito botucatu. Estudou-se a reatividade da cinza pesada com a cal de carbureto, a influência da temperatura e do tempo de cura no desenvolvimento das reações pozolânicas, a influência de diferentes teores de resíduos na resistência à compressão simples, compressão diametral e durabilidade, objetivando definir uma mistura ótima e, ainda, o impacto ambiental da utilização da mistura ótima, através de ensaios de lixiviação e solubilização. Na Etapa Numérica foi estudado, através do Método dos Elementos Finitos, o comportamento de fundações superficiais apoiadas em dupla camada. O modelo utilizado para representar o comportamento do material cimentado e não-cimentado foi o elástico-plástico com critério de ruptura de Drucker-Prager e fluxo não-associado. Verificou-se, através de análise paramétrica, a influência da espessura da camada cimentada e do diâmetro da fundação, bem como a influência dos parâmetros dos materiais cimentado e não-cimentado na resposta carga x recalque de fundações superficiais. Na Etapa de Campo foram construídos aterros experimentais utilizando a mistura ótima determinada na Etapa de Laboratório e, sobre estes aterros, foram executados provas de carga de placas. A análise dos resultados obtidos nas três etapas levou às seguintes conclusões: é possível utilizar cinza pesada e cal de carbureto para estabilizar o solo residual de botucatu; o comportamento de fundações superficiais sobre solos cimentados é controlado pela relação espessura da camada cimentada diâmetro da fundação; os parâmetros ângulo de atrito e módulo de elasticidade da camada cimentada não influenciam os resultados de prova de carga; a ruptura da fundação é função de dois mecanismos progressivos, os quais são função das tensões de tração geradas na parte inferior da camada cimentada e das tensões cisalhantes existentes logo abaixo das bordas da fundação.
Resumo:
o objetivo deste estudo é desenvolver um modelo avaliação fundamentado na teoria das opções reais, que permita avaliar a garantia de recomr~::. de franquias oferecida por alguns franqueadores. A metodologia das opções reais procura entender os métodos de avaliação de ativos financeiros a ativos não-financeiros, utilizando-~·;. principalmente, de metodologias amplamente conhecidas para o cálculo de opções financeiras, como a fórmula desenvolvida por Black-Scholes-Merton e o modelo de precificação 'Jinomial desenvolvido por Cox-Ross-Rubinstein. Nos processos de avaliação tradicionalmente realizados no contexto das finanças corporativas. as avaliações financeiras costurr:~lramente não incorporam variáveis econômico-financeiras com características de opções. bem como não valorizam a possibilidade de se pagar um prêmio para ter o direito de decidir. posteriormente, se a empresa deve ou não desenvolver um projeto ou realizar um investimento. O~tra situação, normalmente nào considerada pelas técnicas tradicionais de avaliação de negócios e de projetos, é o direito de abandonar um projeto; este direito de abandono é denominado opção de abandono. na temlinologia das opções reais. A metodologia das opções reais visa complementar os métodos tradicionais de avaliação de empresas e/ou de projetos, buscando identificar e precificar a obtençào de direitos de decidir ex poslJelclo. A metodologia das opções reais pode também ser aplicada à valorização do patrimônio líquido das empresas, aplicando o conceito de que o investidor se beneficia do fato de seu prejuízo limitar-se ao investimento já realizado, em caso de liquidação da empresa. podendo, por outro lado, beneficiar-se de uma possível valorização (lei infinitum do patrimônio líquido da empresa. A opção de abandono é tecnicamente uma opção de venda. podendo-se aplicar a metodologia das opções reais para situações em que o investidor poderá decidir. em algum tempo futuro. se lhe é mais conveniente continuar no seu negócio ou abandoná-lo conforme condições previamente estabelecidas. Esta assimetria de direitos, típica das oI': :.:s financeiras, é assim incorporada ao processo de valorização de empresas e de proJetos. ~;:-egando variáveis econômico-financeiras não consideradas pelos métodos tradicic:1ais .:.: avaliação que se haseiam, primordialmente, no cálculo do valor presente líquido dos :·.JXOS de caixa descontados. Este trabalho está estruturado em quatro capítulos: O Primeiro Capítulo trata da Introdução aos temas em estudo. cc:"'.tendo uma explicação da importância da Teoria das Opções Reais e de sua inserção no un:·,erso de metodologias de avaliação de projetos e de investimentos. A Teoria das Opções R~ais é associada ao contexto das relações existentes entre franqueadores e franqueados. mais especificamente, em relação à garantia de recompra que alguns franqueadores ofer~cem aos seus fi'anqueados; O Segundo Capítulo explica a Metodologia utilizada no desen\"oivimento deste estudo; O Terceiro Capítulo trata do Referencial Teórico, que explica. aIos princípios básicos da Teoria das Opções. mostrando as principais técnicas já desen\"ohtdas para o cálculo do valor justo de opções; b) os conceitos de avaliação de empresas C) a Teoria das Opções Reais; d) a interaçào entre estes conceitos; e e) os conceitos de franquia. O Quarto Capítulo desenvolve um Modelo de Garantia de Recompra, estabelecendo um referencial teórico-prático que identifica como esta situação comercial pode ser analisada sob a ótica da Teoria das Opções Reais. É descrito um caso prático. com sua solução específica através de diversas técnicas diferentes, mostrando as abordagens disponíveis na Teoria das Opções Reais; e, Ao final, apresentamos nossas conclusões.
Resumo:
No início de 2005, uma nova Lei de Falências foi aprovada pelo Congresso Nacional, entrando em meados de junho do mesmo ano. A nova legislação ampliou o grau de proteção ao credor em muitos aspectos. Este artigo busca investigar algumas das consequências empíricas dessa nova lei sobre o mercado de crédito, utilizado dados de firmas argentinas, brasileiras, chilenas e mexicanas para estimar dois modelos para dados em painel: o primeiro com tendências específicas para cada firma e o outro com tendência macro comum às firmas de um mesmo país. A estimação dos dois modelos produziu resultados similares. Foram encontrados impactos significativos sobre a oferta de crédito, o custo da dívida e a oferta de crédito segurado, não-segurado e de longo prazo. Não foram encontrados impactos sobre o total de dívida de curto prazo.
Resumo:
O presente trabalho tem por objetivo levantar quais as dificuldades que os executivos brasileiros, caracterizados por um estilo gerencial brasileiro, enfrentam ao fazer negócios e trabalhar no México. Escolhemos Brasil e México por dois motivos: o primeiro é que atualmente estes dois países representam as duas maiores economias da América Latina, sendo responsáveis por mais de 60% do PIB da região. O segundo é nosso interesse pessoal, devido nossa própria experiência de trabalho, iniciada em 2002 (e que continua acontecendo até o presente momento) quando começamos a interagir com o México no nosso trabalho cotidiano dentro de uma empresa privada. Para alcançar o nosso objetivo primeiramente definimos o que é cultura, cultura nacional, e como ela afeta o estilo gerencial. Estudamos na bibliografia os estilos gerenciais brasileiro e mexicano, e utilizamos o modelo de comparação de estilos gerenciais de Hofstede para identificar as diferenças entre eles, pois acreditamos que as dificuldades se relacionam com as diferenças entre os dois estilos. Posteriormente, fizemos uma pesquisa de campo, entrevistando de forma semi-estruturada sete executivos brasileiros que trabalharam no México para confirmar as diferenças nos estilos gerenciais e levantar quais foram as dificuldades que eles tiveram por conta das mesmas. Finalmente, apresentamos essas diferenças e concluímos que, ainda que os estilos gerenciais de ambos os países sejam próximos – e isso se reflete nos rankings que ambos ocupam nas quatro dimensões de Hofstede – as diferenças trazem sim dificuldades que precisam ser levadas em conta para facilitar a adaptação e o sucesso nos desafios profissionais que os executivos brasileiros venham a empreender no México.
Resumo:
Este estudo teve como objetivo levantar a visão de futuro da Criminalistiea brasileira conforme as pereepçõcs autonómieas de peritos oficiais empregando como parad igma os efeitos da Lei 12.03012009, que atribuiu a autonomia técnica, científica ti funcional " estes profissionais. Para isso, rea lizou-se uma pesquisa bibliográfica c de campo. O univcrso da pesquisa foi os Peritos Oficiai , . /\ amo,tra foi fommda por 39 peritos Criminais, um grupo principal COl1lpo~to por 31 peritos de carreira incluindo gestores locais de Instituições Federais (Polícia FctJeral, Polícia do Distrito Federal) e c.s tadoaiS (Polícia Civil e Secretaria de Scgurança Pública) c um grupo complcnlenlar composto por Gestores (04) c Lideranças (04) Nacionai~ destes órgãos. Ao grupo principal foi aplicado um testc de evocação com as palavras "Autonomia" e "Pcricia". como fase preparatória às entrevistas semi cSlrutura
Resumo:
We study the effects of a conditional transfers program on school enrollment and performance in Mexico. We provide a theoretical framework for analyzing the dynamic educational decision and process inc1uding the endogeneity and uncertainty of performance (passing grades) and the effect of a conditional cash transfer program for children enrolled at school. Careful identification of the program impact on this model is studied. This framework is used to study the Mexican social program Progresa in which a randomized experiment has been implemented and allows us to identify the effect of the conditional cash transfer program on enrollment and performance at school. Using the mIes of the conditional program, we can explain the different incentive effects provided. We also derive the formal identifying assumptions needed to provide consistent estimates of the average treatment effects on enrollment and performance at school. We estimate empirically these effects and find that Progresa had always a positive impact on school continuation whereas for performance it had a positive impact at primary school but a negative one at secondary school, a possible consequence of disincentives due to the program termination after the third year of secondary school.
Resumo:
This research analyzes and compares the attractiveness of the Brazilian and Mexican credit card markets from a financial firm’s perspective. The market dynamics in Latin America’s two economic powerhouses are fleshed out with qualitative and quantitative data, using a strategic framework to structure the analysis. Since its adoption by both countries in 1956, credit card usage has experienced many years of double digit growth. However, penetration levels remain low compared with most developed countries. Brazil has a more developed credit card infrastructure, with more potential profit, and issuers might face fewer competitive challenges. Alternatively, Mexico, is witnessing a more favorable economy, a friendlier business and regulatory environment, combined with fewer financial products that compete with the credit card. Therefore, this paper concludes that Brazil and Mexico both offer market opportunities for credit card companies that can navigate the different technological, demographic, macroeconomic, and regulatory shifts in each country.
Resumo:
This doctoral dissertation provides a detailed analysis of the Brazilian cabinet according to the concepts of a multiparty presidential system. Appointing politicians as ministers is one of the most important coalition-building tools and has been widely used by minority presidents. This dissertation will therefore analyze the high-level Brazilian national bureaucracy between 1995 and 2014. It argues that the ministries – or departments – are not equal, and that allied parties therefore take into account the different characteristics of a ministry when demanding positions as a patronage strategy or for use as other kinds of political assets. After reviewing the literature on the theme, followed by a comparative analysis of the Brazilian, Chilean, Mexican, and Guatemalan cabinets, all the Brazilian ministries will be weighed and ranked on a scale that is able to measure their political importance and attractiveness. This rank takes into account variables such as the budgetary power, the ability to spend money according the ministers’ will, the ability to hire new employees, the ministries’ influence over other governmental agents such as companies, agencies, and so on, the ministers’ tenure in office. Finally, a proxy is provided that seeks to identify the normative power a department may hold. All of these characteristics will then be taken into account in considering the representatives’ opinion, thus helping to ascertain whether the cabinet appointment has been coalescent among the several parties that belong to the president’s coalition.
Resumo:
BEZERRA, Márcia Maria de Oliveira. Estrategias de desenvolvimento do turismo: em busca de uma tipologia. Economia e Sociedade, Campinas, v. 15, n. 2, p. 347-374, ago. 2006.
Resumo:
The dissertation intends to develop an investigation on the artistic existence in human beings with different bodies in society at different historical moments. In this regard and based on this scenario, the study develops a description of the stigmas production and how they are established, spread and interfere with the sociability among human beings regarded as normal and those with different bodies. Regarding the scenic arts, the text describes about the participation of artists with different bodies in the scene, specifically the freak show and postdramatic theater. The text also investigates aspects of the biography and the work of mexican artist Frida Kahlo, which underpin methodological proceedings and produce contribution to the creative process of performance Kahlo em mim Eu e(m) Kahlo , which is to investigate the practice of the scene in this dissertation
Resumo:
Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry
Resumo:
The use of binders in the soil for the production of solid bricks is an old construction technique that has been used by several civilizations over time. At the same time, the need for environmental preservation and the tendency of scarcity of natural resources make the construction invest in researching new concepts, methods and materials for building systems for the sustainability of their economic activities. Thus arises the need to obtain building materials with low power consumption, capable of reducing the growing housing shortage of rural and urban population. Currently, research has been conducted on this topic to better understand the cementitious and pozzolanic reactions that occur in the formation of the microstructure of the soil-cement when added to other materials such as, for example, lime, and the relationship between microstructure and formed interfaces with the physical, mechanical and chemical analysis in compounds made from these ternary compositions. In this context, this study aimed to analyze the results of the influence of the incorporation of lime to the soil-cement to form a ternary mixture to produce soil-cement bricks and mortar without structural purposes. From the inclusion of contents of 6 %, 8 %, 10% and 12% lime to the soil, and soil-cement mixes in amounts of 2 %, 3 %, 4 % and 5 % were shaped-bodies of -cylindrical specimens to determine the optimum moisture content and maximum dry apparent specific weight. Then they were cured, and subjected to the tests of compressive strength, absorption and durability modified. Compositions obtained the best results in the tests performed on the bodies-of-proof cylindrical served as a parameter for molding of solid bricks, which underwent the same experimental methodology previously cited. The raw materials used, as well as compositions in which the bricks were molded solid, were characterized by physical and chemical tests, X-ray diffraction and scanning electron microscopy. The results obtained in the study indicate that the compositions studied, that showed the best results in terms of compressive strength, water absorption and durability ternary composition was soil, 10 % cement and 2 % lime
Resumo:
The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings
Resumo:
Cementing operation is one of the most important stages in the oil well drilling processes and has main function to form hydraulic seal between the various permeable zones traversed by the well. However, several problems may occur with the cement sheath, either during primary cementing or during the well production period. Cements low resistance can cause fissures in the cement sheath and compromise the mechanical integrity of the annular, resulting in contamination of groundwater and producing zones. Several researches show that biomass ash, in particular, those generated by the sugarcane industry have pozzolanic activity and can be added in the composition of the cementing slurries in diverse applications, providing improvements in mechanical properties, revenue and cement durability. Due to the importance of a low cost additive that increases the mechanical properties in a well cementing operations, this study aimed to potentiate the use of sugarcane bagasse ash as pozzolanic material, evaluate the mechanisms of action of this one on cement pastes properties and apply this material in systems slurries aimed to cementing a well with 800 m depth and geothermal gradient of 1.7 °F/100 ft, as much primary cementing operations as squeeze. To do this, the ash beneficiation methods were realized through the processes of grinding, sifting and reburning (calcination) and then characterization by X-ray fluorescence, XRD, TG / DTG, specific surface area, particle size distribution by laser diffraction and mass specific. Moreover, the ash pozzolanic activity added to the cement at concentrations of 0%, 20% and 40% BWOC was evaluated by pozzolanic activity index with lime and with Portland cement. The evaluation of the pozzolanic activity by XRD, TG / DTG and compressive strength confirmed the ash reactivity and indicated that the addition of 20% in the composition of cement slurries produces improvement 34% in the mechanical properties of the slurry cured. Cement slurries properties evaluated by rheological measurements, fluid loss, free fluid, slurry sedimentation, thickening time and sonic strength (UCA) were satisfactory and showed the viability of using the sugarcane ash in cement slurries composition for well cementing