Origin of the hemoglobin S gene in a northern Brazilian population: the combined effects of slave trade and internal migrations

Com o objetivo de investigar a origem da mutação bS na população da região norte do Brasil, foram analisados polimorfismos de DNA no complexo de genes b da hemoglobina em 30 pacientes com anemia falciforme na população de Belém, a capital do Estado do Pará. Sessenta e sete por cento dos cromossomos bS analisados apresentaram o haplótipo Bantu, 30% o haplótipo Benin e 3% o haplótipo Senegal. A origem da mutação bS na população de Belém, estimada de acordo com a distribuição de haplótipos, não está de acordo com a esperada com base em dados históricos sobre o tráfico de escravos para a região norte, os quais indicam uma reduzida contribuição de escravos da região do Benin. Essas diferenças podem ser atribuídas ao tráfico interno de escravos, bem como ao posterior fluxo de populações imigrantes, particularmente de nordestinos. A distribuição de haplótipos em Belém não difere significativamente da observada em outras regiões brasileiras, muito embora os dados históricos sugiram que a maioria dos escravos procedentes da região do Atlântico-Oeste africano, onde predomina o haplótipo Senegal, foi trazida para o norte do Brasil, enquanto que o nordeste (Bahia, Pernambuco e Maranhão) recebeu o maior contingente de escravos oriundos da região centro-oeste africana, onde o haplótipo Benin é o mais comum. Nós sugerimos que as diferenças regionais quanto à procedência dos escravos africanos também foram modificadas pelo tráfico de escravos estabelecido entre as diferentes regiões brasileiras e posteriormente pelos movimentos migratórios.

Composition of functional ecological guilds of the fish fauna of the internal sector of the Amazon Estuary, Pará, Brazil

O presente estudo descreve a estrutura espacial e temporal da comunidade de peixes estuarinos da porção interna do estuário Amazônico. Amostras foram obtidas no canal principal e canais de maré das Baías do Guajará e Marajó e rio Guamá. Foram coletados um total de 41.516 espécimes, correspondendo 136 espécies, 38 famílias e 12 ordens. Na estação seca, a salinidade média no canal principal aumentou ao longo do gradiente limnico–marinho, entre o rio Guamá e a Baía do Marajó. A riqueza de espécies foi mais baixa na foz do rio Guamá e na margem direita da baía do Guajará. A composição das espécies e as guildas ambientais diferiram significativamente entre as áreas: Migrantes e Ocasionais de água doce foram dominantes no rio Guamá e na Baía do Guajará, enquanto Estuarinas, Marinhas Migrantes e Ocasionais dominaram na Baía do Marajó. Contudo, as guildas tróficas foram relativamente bem balanceadas, em termos funcionais. Piscívoros e Zoobentívoros foram os grupos alimentares dominantes em todas as áreas. Neste estudo, a avaliação da comunidade e o uso da abordagem com guildas foram eficientes para descrever a estrutura e o funcionamento das assembleias de peixes estuarinos e também como ferramenta na avaliação das pressões antrópicas na área.

Evidence for biological inheritance of the eosinophil response to internal parasites in southeastern Brazil

Uma amostra de 177 indivíduos pertencentes a 120 famílias nucleares, completas ou incompletas, de Bambui, Estado de Minas Gerais, sudeste do Brasil, foi estudada com o objetivo de apurar algumas das causas da variabilidade da taxa de eosinófilos em pessoas parasitadas por vermes intestinais com ciclo de vida extra-digestivo. A análise de segregação, aplicada aos dados sem correção para a assimetria, mostrou que a hipótese de um gene principal aditivo é consistente com os dados, enquanto que as hipóteses que supõem a ação de um gene dominante, de um gene recessivo ou ainda herança multifatorial não explicam, adequadamente, a significante agregação familial observada. A correção mais parcimoniosa para assimetria mostrou resultados semelhantes, mas não permitiu a distinção entre os modelos dominante e recessivo, embora permitisse a rejeição do modelo codominante. Considerando que esse modelo supõe ser a assimetria devida ao entrelaçamento de duas distribuições, esses resultados parecem concordar com aqueles obtidos quando os dados não foram corrigidos. Pode-se sugerir que o papel desempenhado por vários fatores genéticos independentes na resistência/suscetibilidade à infestação por helmintos seja determinado, principalmente, por suas capacidades de agir no estabelecimento de uma resposta eosinofílica.

Larvae of proceratophrys melanopogon (amphibia: anura), with emphasis on internal oral morphology and comparisons with p. cururu and p. moratoi

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Internal Combustion Engine's Throttle Control as a Motivational Theme for Teaching Microprocessors Systems Lab Classes

The increased fuel economy and driveability of modern internal combustion engine vehicles (ICEVs) are the result of the application of advanced digital electronics to control the operation of the internal combustion engine (ICE). Microprocessors (and micro controllers) play a key role in the engine control, by precisely controlling the amount of both air and fuel admitted into the cylinders. Air intake is controlled by utilizing a throttle valve equipped with a motor and gear mechanism as actuator, and a sensor enabling the measurement of the angular position of the blades. This paperwork presents a lab setup that allows students to control the throttle position using a microcontroller that runs a program developed by them. A commercial throttle body has been employed, whereas a power amplifier and a microcontroller board have been hand assembled to complete the experimental setup. This setup, while based in a high-tech, microprocessor-based solution for a real-world, engine operation optimization problem, has the potential to engage students around a hands-on multidisciplinary lab activity and ignite their interest in learning fundamental and advanced topics of microprocessors systems.

Comparative analysis between a PEM fuel cell and an internal combustion engine driving an electricity generator: Technical, economical and ecological aspects

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bismuth as a general internal standard for lead in atomic absorption spectrometry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Internal standard for amorphous pharmaceuticals products quantification and an application of Parametric Rietveld refinement using time, temperature and relative humidity as 'non-crystallographic' parameters

Pós-graduação em Química - IQ

Determination of pantoprazole in human plasma by LC-MS-MS using lansoprazole as internal standard

An analytical method based on liquid chromatography with positive ion electrospray ionization (ESI) coupled to tandem mass spectrometry detection was developed for the determination of pantoprazole (CAS 102625-70-7) in human plasma using lansoprazole (CAS 103577-45-3) as the internal standard. The analyte and internal standard were extracted from the plasma samples by liquid/liquid extraction using diethyl-ether/dichloromethane (70:30; v/v) and chromatographed on a C-8 analytical column. The mobile phase consisted of acetonitrile/water/methanol (57:25:18; v/v/v) + 10 mmol/l acetic acid + 20 mmol/l ammonium acetate. The method has a chromatographic total run time of 4.5 min and was linear within the range 5.0-5,000 ng/mL. Detection was performed on a triple quadrupole tandem mass spectrometer by Multiple Reaction Monitoring (MRM). The intra- and inter-run precisions calculated from quality control (QC) samples were 4.2% and 3.2%, respectively. The accuracies as determined from QC samples were -5.0% (intra-run) and 2.0% (inter-run). The method herein described was employed in a bioequivalence study of two tablet formulations of pantoprazole.

Biomechanical Study in Polyurethane Mandibles of Different Metal Plates and Internal Fixation Techniques, Employed in Mandibular Angle Fractures

The aim of this study was to perform a physicochemical and morphological characterization and compare the mechanical behavior of an experimental Ti-Mo alloy to the analogous metallic Ti-based fixation system, for mandibular angle fractures. Twenty-eight polyurethane mandibles were uniformly sectioned on the left angle. These were divided into 4 groups: group Eng 1P, one 2.0-mm plate and 4 screws 6 mm long; group Eng 2P, two 2.0-mm plates, the first fixed with 4 screws 6 mm long and the second with 4 screws 12 mm long. The same groups were created for the Ti-15Mo alloy. Each group was subjected to linear vertical loading at the first molar on the plated side in a mechanical testing unit. Means and standard deviations were compared with respect to statistical significance using ANOVA. The chemical composition of the Ti-15Mo alloy was close to the nominal value. The mapping of Mo and Ti showed a homogeneous distribution. SEM of the screw revealed machining debris. For the plates, only the cpTi plate undergoes a surface treatment. The metallographic analysis reveals granular microstructure, from the thermomechanical trials. A statistically significant difference was found (P < 0.05) when the comparison between both internal fixation techniques was performed. The 2P technique showed better mechanical behavior than 1P.

Fracture resistance of teeth submitted to several internal bleaching protocols

Aim: The aim of this study was to evaluate the fracture resistance of teeth submitted to several internal bleaching protocols using 35% hydrogen peroxide (35HP), 37% carbamide peroxide (37CP), 15% hydrogen peroxide with titanium dioxide nanoparticles (15HPTiO2) photoactivated by LED-laser or sodium perborate (SP). Materials and methods: After endodontic treatment, fifty bovine extracted teeth were divided into five groups (n = 10): G1-unbleached; G2-35HP; G3-37CP; G4-15HPTiO2 photoactivated by LED-laser and G5-SP. In the G2 and G4, the bleaching protocol was applied in 4 sessions, with 7 days intervals between each session. In the G3 and G5, the materials were kept in the pulp teeth for 21 days, but replaced every 7 days. After 21 days, the teeth were subjected to compressive load at a cross head speed of 0.5 mm/min, applied at 135° to the long axis of the root using an eletromechanical testing machine, until teeth fracture. The data were submitted to ANOVA and Tukey tests (α = 5%). Results: The 35HP, 37CP, 15HPTiO2 and SP showed similar fracture resistance teeth reduction (p > 0.05). All bleaching treatments reduced the fracture resistance compared to unbleached teeth (p < 0.05). Conclusion: All bleaching protocols reduced the fracture resistance of endodontically-treated teeth, but there were no differences between each other. Clinical significance: There are several internal bleaching protocols using hydrogen peroxide in different concentrations and activation methods. This study evaluated its effects on fracture resistance in endodontically-treated teeth.