No Major Differences Found between the Effects of Microwave-Based and Conventional Heat Treatment Methods on Two Different Liquid Foods

Extension of shelf life and preservation of products are both very important for the food industry. However, just as with other processes, speed and higher manufacturing performance are also beneficial. Although microwave heating is utilized in a number of industrial processes, there are many unanswered questions about its effects on foods. Here we analyze whether the effects of microwave heating with continuous flow are equivalent to those of traditional heat transfer methods. In our study, the effects of heating of liquid foods by conventional and continuous flow microwave heating were studied. Among other properties, we compared the stability of the liquid foods between the two heat treatments. Our goal was to determine whether the continuous flow microwave heating and the conventional heating methods have the same effects on the liquid foods, and, therefore, whether microwave heat treatment can effectively replace conventional heat treatments. We have compared the colour, separation phenomena of the samples treated by different methods. For milk, we also monitored the total viable cell count, for orange juice, vitamin C contents in addition to the taste of the product by sensory analysis. The majority of the results indicate that the circulating coil microwave method used here is equivalent to the conventional heating method based on thermal conduction and convection. However, some results in the analysis of the milk samples show clear differences between heat transfer methods. According to our results, the colour parameters (lightness, red-green and blue-yellow values) of the microwave treated samples differed not only from the untreated control, but also from the traditional heat treated samples. The differences are visually undetectable, however, they become evident through analytical measurement with spectrophotometer. This finding suggests that besides thermal effects, microwave-based food treatment can alter product properties in other ways as well.

Projektin sisäinen viestintä. Työntekijäryhmien viestintäkäsitykset järjestelmäprojektin käyttöönottovaiheesta nykypäivään, tapaustutkimus Tieliikelaitoksessa

Tutkielman tavoitteena on selvittää, mitä piirteitä ja eroja on löydettävissä eri työntekijäryhmien käsityksissä sisäisen viestinnän toimivuudesta ja mitä ominaisuuksia nämä käsitykset heijastavat yhteisöstä. Tavoitteeseen pyritään laadullisella tapaustutkimuksella, jossa tutkimusmenetelmänä käytetään teemahaastattelua. Tutkimuksen perusteella voidaan todeta projektin sisäisen viestinnän piirteiden heijastavan hyvin viestinnän eri toimintaympäristöjä. Projektin sisällä toimintaympäristöt voidaan erottaa jopa työntekijäryhmittäin. Viestintäkäsitykset paljastavat myös sisäisen viestinnän jatkuvan muutostilan, joka voidaan havaita integroivan ja dissipatiivisen viestinnän vahvuuksien vaihtelulla. Tutkimus vahvisti käsitystä pelkän integroivan viestinnän riittämättömyydestä sisäisen viestinnän myönteisenä kokemiseen. Nykypäivänä myös mekanistisesti toimivissa ympäristöissä tulisi edistää horisontaalisia, vuorovaikutuksellisia ja avoimia kommunikaatiokäytäntöjä. Tutkimus vahvisti edelleen käsitystä johdon ja esimiesten näkyvyyden ja kuuluvuuden merkityksestä hallita mekanistisessa ympäristössä, mutta johdolta odotetaan myös yhä enemmän dialogiin perustuvien viestintävalmiuksien hallintaa. Ymmärtämällä kolmen erilaisen toimintaympäristön olemassaolo, voidaan sisäisen viestinnän resursseja kohdistaa tehokkaasti ympäristön ominaisuuksien ja tavoitteiden suuntaisesti.

Online brands: Branding, possible worlds, and interactive grammars

This paper proposes to reflect from a semiotic perspective on the transformation that brands have undergone since the rise of the Internet. After a brief theoretical introduction to digital communication and the semiotics of brands, the case of the Google brand is analyzed by applying concepts of generative and interpretive semiotics. The paper holds that the iconic and linguistic enunciations are secondary with respect to interaction. In digital media interaction — the interactive experience that the Internet user lives — is a fundamental component of the hypermedia cocktail and occupies a central position in the brand building process. The article concludes with some of the questions and special characteristics raised by so-called eBranding.

Asiakasosaamisen oppiminen Case Etelä-Karjalan Osuuspankki

Tämän tutkimuksen tarkoituksena on selvittää pankin sisäisellä termillä nimitetyn asiakasosaamisen sisältöä. Tutkimuksessa tarkastellaan kokeneille toimihenkilöille kehittyneitä asiakaspalvelutaitoja sekä keinoja, joilla näitä taitoja ja osaamista voidaan siirtää pankkiin rekrytoiduille vasta-alkajille. Tutkimuksen tavoitteena on myös löytää menetelmiä organisaation oppimisen tukemiseen. Tutkimuksen teoriaosassa tarkastellaan yksilöä oppijana ja tiedonkäsittelijänä sekä organisaation oppimista. Työyhteisön oppimisen edistämisen keinoja käsitellään työssä oppimisen ja henkilöstöjohtamisen näkökulmista. Empiirinen osa koostuu haastatteluista, joissa kokeneet toimihenkilöt ja vasta-alkajat tuovat esiin näkemyksiään hyvästä asiakaspalvelusta. Tutkimustulosten perusteella asiakasosaaminen koostuu teknisestä ja tiedollisesta osaamisesta sekä vuorovaikutustaidoista. Näiden taitojen siirtäminen edellyttää avointa, keskustelevaa organisaatiota, joka jatkuvasti kyseenalaistaa käytäntöjään ja on halukas sitoutumaan pysyvän oppimiskulttuurin kehittämiseen.

COMPARISON OF RNA EXTRACTION METHODS FOR Passiflora edulis SIMS LEAVES

ABSTRACT Functional genomic analyses require intact RNA; however, Passiflora edulis leaves are rich in secondary metabolites that interfere with RNA extraction primarily by promoting oxidative processes and by precipitating with nucleic acids. This study aimed to analyse three RNA extraction methods, Concert™ Plant RNA Reagent (Invitrogen, Carlsbad, CA, USA), TRIzol® Reagent (Invitrogen) and TRIzol® Reagent (Invitrogen)/ice -commercial products specifically designed to extract RNA, and to determine which method is the most effective for extracting RNA from the leaves of passion fruit plants. In contrast to the RNA extracted using the other 2 methods, the RNA extracted using TRIzol® Reagent (Invitrogen) did not have acceptable A260/A280 and A260/A230 ratios and did not have ideal concentrations. Agarose gel electrophoresis showed a strong DNA band for all of the Concert™ method extractions but not for the TRIzol® and TRIzol®/ice methods. The TRIzol® method resulted in smears during electrophoresis. Due to its low levels of DNA contamination, ideal A260/A280 and A260/A230 ratios and superior sample integrity, RNA from the TRIzol®/ice method was used for reverse transcription-polymerase chain reaction (RT-PCR), and the resulting amplicons were highly similar. We conclude that TRIzol®/ice is the preferred method for RNA extraction for P. edulis leaves.

Brown algal phlorotannins: Improving and applying chemical methods

Phlorotannins are the least studied group of tannins and are found only in brown algae. Hitherto the roles of phlorotannins, e.g. in plant-herbivore interactions, have been studied by quantifying the total contents of the soluble phlorotannins with a variety of methods. Little attention has been given to either quantitative variation in cell-wall-bound and exuded phlorotannins or to qualitative variation in individual compounds. A quantification procedure was developed to measure the amount of cell-wall-bound phlorotannins. The quantification of soluble phlorotannins was adjusted for both large- and small-scale samples and used to estimate the amounts of exuded phlorotannins using bladder wrack (Fucus vesiculosus) as a model species. In addition, separation of individual soluble phlorotannins to produce a phlorotannin profile from the phenolic crude extract was achieved by high-performance liquid chromatography (HPLC). Along with these methodological studies, attention was focused on the factors in the procedure which generated variation in the yield of phlorotannins. The objective was to enhance the efficiency of the sample preparation procedure. To resolve the problem of rapid oxidation of phlorotannins in HPLC analyses, ascorbic acid was added to the extractant. The widely used colourimetric method was found to produce a variation in the yield that was dependent upon the pH and concentration of the sample. Using these developed, adjusted and modified methods, the phenotypic plasticity of phlorotannins was studied with respect to nutrient availability and herbivory. An increase in nutrients decreased the total amount of soluble phlorotannins but did not affect the cell-wall-bound phlorotannins, the exudation of phlorotannins or the phlorotannin profile achieved with HPLC. The presence of the snail Thedoxus fluviatilis on the thallus induced production of soluble phlorotannins, and grazing by the herbivorous isopod Idotea baltica increased the exudation of phlorotannins. To study whether the among-population variations in phlorotannin contents arise from the genetic divergence or from the plastic response of algae, or both, algae from separate populations were reared in a common garden. Genetic variation among local populations was found in both the phlorotannin profile and the content of total phlorotannins. Phlorotannins were also genetically variable within populations. This suggests that local algal populations have diverged in their contents of phlorotannins, and that they may respond to natural selection and evolve both quantitatively and qualitatively.

Fluid dynamics simulation of right ventricular outflow tract oversizing.

OBJECTIVES: Repair of the right ventricular outflow tract (RVOT) in paediatric cardiac surgery remains challenging due to the high reoperation rate. Intimal hyperplasia and consequent arteriosclerosis is one of the most important limitation factors for graft durability. Since local shear stress and pressure are predictive elements for intimal hyperplasia and wall degeneration, we sought to determine in an oversized 12-mm RVOT model, with computed fluid dynamics simulation, the local haemodynamical factors that may explain intimal hyperplasia. This was done with the aim of identifying the optimal degree of oversizing for a 12-mm native RVOT. METHODS: Twenty domestic pigs, with a weight of 24.6 ± 0.89 kg and a native RVOT diameter of 12 ± 1.7 mm, had valve conduits of 12, 16, 18 and 20 mm implanted. Pressure and flow were measured at 75, 100 and 125% of normal flow at RVOT at the pulmonary artery, pulmonary artery bifurcation and at the left and right pulmonary arteries. Three-dimensional computed fluid dynamics (CFD) simulation in all four geometries in all flow modalities was performed. Local shear stress and pressure conditions were investigated. RESULTS: Corresponding to 75, 100 and 125% of steady-state flow, three inlet velocity profiles were obtained, 0.2, 0.29 and 0.36 m/s, respectively. At inflow velocity profiles, low shear stress areas, ranged from 0 to 2 Pa, combined with high-pressure areas ranging from 11.5 to 12.1 mmHg that were found at distal anastomosis, at bifurcation and at the ostia of the left and right pulmonary arteries in all geometries. CONCLUSIONS: In all three oversized geometries, the local reparation of shear stress and pressure in the 16-mm model showed a similar local profile as in the native 12 mm RVOT. According to these findings, we suggest oversizing the natural 12-mm RVOT by not more than 4 mm. The elements responsible for wall degeneration and intimal hyperplasia remain very similar to the conditions present in native RVOT.

Adaptive MCMC methods with applications in environmental and geophysical models

This work presents new, efficient Markov chain Monte Carlo (MCMC) simulation methods for statistical analysis in various modelling applications. When using MCMC methods, the model is simulated repeatedly to explore the probability distribution describing the uncertainties in model parameters and predictions. In adaptive MCMC methods based on the Metropolis-Hastings algorithm, the proposal distribution needed by the algorithm learns from the target distribution as the simulation proceeds. Adaptive MCMC methods have been subject of intensive research lately, as they open a way for essentially easier use of the methodology. The lack of user-friendly computer programs has been a main obstacle for wider acceptance of the methods. This work provides two new adaptive MCMC methods: DRAM and AARJ. The DRAM method has been built especially to work in high dimensional and non-linear problems. The AARJ method is an extension to DRAM for model selection problems, where the mathematical formulation of the model is uncertain and we want simultaneously to fit several different models to the same observations. The methods were developed while keeping in mind the needs of modelling applications typical in environmental sciences. The development work has been pursued while working with several application projects. The applications presented in this work are: a winter time oxygen concentration model for Lake Tuusulanjärvi and adaptive control of the aerator; a nutrition model for Lake Pyhäjärvi and lake management planning; validation of the algorithms of the GOMOS ozone remote sensing instrument on board the Envisat satellite of European Space Agency and the study of the effects of aerosol model selection on the GOMOS algorithm.

Valoración experiencial del aprendizaje tras formación virtual.

[eng] An observable study on the behaviour in the laboratory of Pharmaceutical Technology II (pharmaceutical pilot plant), with two groups of students of 3rd course (proactive aptitude and valuation of the"knowledge to do acquired") is carried out. The variable between groups is that one has realised a training (by means of self-study of an interactive application multimedia, especially designed), without tutorship on behalf the teacher in front of the other group that carried out the same training with the same material but with the guide of the teacher in the computer lab. On the one hand it is valued if there is some effect differentiator between both types of training, by means of the accounting of the correct results obtained in a previous test to the entrance in the pilot plant and by another one the valuation that the professors made responsible for the groups of practices in situ. The results demonstrate the previous hypothesis that there must not be significant differences between the groups, beyond the inherent ones to personality of the students itself (interest and personal implication by the subject). On the other hand the test for the observation in the laboratory did not facilitate the distinction of objective differences. [spa] Se lleva a cabo un estudio observacional sobre el comportamiento de los estudiantes (aptitud pro-activa y valoración del “saber hacer adquirido”) en el laboratorio de Tecnología Farmacéutica II (planta piloto farmacéutica) de dos grupos de estudiantes de 3er curso. La variable entre los dos grupos es que uno ha realizado una formación no presencial (mediante el autoestudio de una aplicación interactiva multimedia, especialmente diseñada), sin tutoría por parte del profesor, frente al otro grupo que llevó a cabo la misma formación con el mismo material pero con la guía del profesor en el aula de informática. Por una parte se valora si hay algún efecto diferenciador entre ambos tipos de formación, mediante la contabilización de los resultados correctos obtenidos en un test previo a la entrada en la planta piloto y por otro la valoración que hicieron los profesores responsables de los grupos de prácticas in situ. Los resultados demuestran la hipótesis previa de que no debían existir diferencias significativas entre los grupos, más allá de las inherentes a la propia personalidad de los estudiantes (interés e implicación personal por el tema). Por otra parte el test para la observación en el laboratorio no facilitó la distinción de diferencias objetivas.

Apical closure device for transapical valve procedures?.

OBJECTIVES: Transapical transcatheter valve procedures are performed through a left minithoracotomy and require apical sutures to seal the apical access site. The use of large-calibre devices compromises any attempt to fully perform the procedure with a thoracoscopic approach or percutaneously. We report our preliminary experience in animals with a new sutureless self-expandable apical occluder, engineered to perform transapical access site closure in a minimally invasive setting with large-size introducer sheaths. METHODS: The apical occluder with extendable waist was implanted in six young pigs during an acute animal study. Under general anaesthesia, animals (mean weight: 62 ± 8 kg) received full heparinization (heparin: 100 UI/kg; activated clotting time above 250 s). Through a median sternotomy, a 21-Fr Certitude? introducer sheath (outer diameter: 25 Fr) was placed over the wire into the cardiac apex. The delivery catheter carrying the constrained apical plug was inserted into the sheath and deployed under fluoroscopic control, whereas the Certitude? was retrieved. After protamine infusion, we observed and recorded the 1-h bleeding with standard haemodynamic parameters. Animals were sacrificed, and hearts analysed. RESULTS: Six apical closure devices were successfully introduced and deployed in six pig hearts through large-size apical sheaths at first attempt. In all animals, the plugs guaranteed immediate apical sealing and traces of blood were collected in the pericardium during the 1-h observational period (mean of 16 ± 3.4 ml of blood loss per animal). Haemodynamic parameters remained stable during the entire study period and no plug dislodgement was detected with normal systemic blood pressure (mean arterial mean blood pressure: 65 ± 7 mmHg). Post-mortem analysis confirmed the full deployment and good fixation of all plugs, without macroscopic damages to the surrounding myocardium. CONCLUSIONS: This sutureless self-expandable apical occluder is a simple device capable of sealing large-size apical access sites (20-35 Fr) in an acute animal study. This approach is a step further towards less invasive transapical valve procedures in the clinical setting, and further animal tests will be performed to confirm the long-term efficacy and safety of this device.