Perspective maternelle de la consultation anténatale pour travail préterme : une approche relationnelle

Une femme à risque d’un accouchement prématuré vit un enjeu de santé très éprouvant et stressant ; elle sera souvent hospitalisée pour recevoir des traitements médicaux visant à prolonger la grossesse et améliorer le pronostic du bébé. Dans ce contexte, une consultation avec un néonatalogiste est demandée. Plusieurs associations professionnelles médicales ont émis des lignes directrices sur cette consultation, insistant sur le besoin d’informer les parents au sujet des complications potentielles de la prématurité pour leur enfant. Ces recommandations s’inspirent du point de vue médical, et très peu d’études ont examiné la perspective, les attentes et les besoins des parents à risque d’un accouchement prématuré. Ce projet de thèse a pour objectif de proposer un modèle de relation médecin-patient informé de la perspective maternelle de la consultation anténatale, pour développer une approche clinique répondant à leurs besoins. Afin d’examiner cette problématique de façon complète, un travail constant de va-et-vient a été effectué entre la recension de données empiriques et une réflexion normative bioéthique féministe. Un projet de recherche empirique a d’abord permis d’explorer les attentes et le vécu de ces femmes. Les participantes espéraient recevoir plus que de l’information sur les complications de la prématurité. Elles souhaitaient que le néonatologiste soit attentif à leur situation particulière et qu’il développe une relation de confiance avec elles, leur permettant d’explorer leurs futurs rôles de mères et les encourageant à formuler leurs propres questions. Le cadre théorique féministe d’autonomie relationnelle a ensuite permis de proposer une approche de soin qui sache répondre aux besoins identifiés par les patientes, tout en adressant des enjeux de pouvoir intrinsèques à la clinique, qui influencent la santé et l’autonomie de ces femmes. Cette approche insiste sur l’importance de la relation de soin en clinique, contrastant avec un modèle encourageant une vision réductrice de l’autonomie, dans laquelle un simple transfert de données scientifiques serait équivalent au respect de la norme médicolégale du consentement éclairé. Ce modèle relationnel propose des actions concrètes et pratiques, encourageant les cliniciens à entrer en relation avec chaque patiente et à considérer l’influence qu’ils exercent sur l’autonomie relationnelle de leurs patientes.

L’égalité des sexes n’a rien à voir avec la science!

Cet article critique un livre récemment écrit dont l’objectif est de défendre l’égalité des sexes en niant l’existence de différences entre les femmes et les hommes. La première partie de l’article affirme que l’égalité des sexes est une valeur sociale qui ne se réduit pas au fait que les femmes et les hommes se distinguent à certains égards. Les chercheurs qui défendent leurs valeurs ou croyances personnelles à partir des recherches font un abus de pouvoir qui affecte à la fois leur crédibilité et celle de la science. La seconde partie démontre que les différences sexuelles mises à jour jusqu’à maintenant, parfois petites parfois grandes, méritent d’être mieux comprises, même si les hommes et les femmes ont davantage de points communs qu’ils ne présentent de différences. Les chercheurs tiennent rarement compte du contexte lorsqu’ils mesurent les différents traits et comparent des scores plutôt que de comparer les processus développementaux impliqués dans l’adaptation des femmes et des hommes à leur environnement. Les processus développementaux qu’il nous faut découvrir impliquent nécessairement une interaction entre l’environnement et les prédispositions biologiques.

Human Rights Violations in Police Custody

Human rights are the basic rights of every individual against the state or any other public authority as a member of the human family irrespective of any other consideration. Thus every individual of the society has the inherent right to be treated with dignity in all situations including arrest and keeping in custody by the police. Rights of an individual in police custody are protected basically by the Indian Constitution and by various other laws like Code of Criminal Procedure, Evidence Act, Indian Penal Code and Protection of Human Rights Act. The term `custody' is defined neither in procedural nor in substantive laws. The word custody means protective care. The expression `police custody' as used in sec. 27 of Evidence Act does not necessarily mean formal arrest. In India with special reference to Kerala and evolution and development of the concept of human rights and various kinds of human rights violations in police custody in different stages of history. Human rights activists and various voluntary organisations reveals that there are so many factors contributing towards the causes of violations of human rights by police. Sociological causes like ambivalent outlook of the society with respect to the use of third degree methods by the police, economic causes like meager salary and inadequate living conditions, rampant corruption in police service, unnecessary political interference in the crime investigation, work load of police personnel without any time limit and periodic holidays, unnecessary pressure from superior police officers and the general public for speedy detection causing great mental strain to the investigating officers, defective system of recruitment and training, imperfect system of investigation and lack of public co-operation are some of the factors identified in the field survey towards the causes of violations of human rights in police custody.

Some Efficient Representations of 3D Information based on Octress

The thesis introduced the octree and addressed the complete nature of problems encountered, while building and imaging system based on octrees. An efficient Bottom-up recursive algorithm and its iterative counterpart for the raster to octree conversion of CAT scan slices, to improve the speed of generating the octree from the slices, the possibility of utilizing the inherent parallesism in the conversion programme is explored in this thesis. The octree node, which stores the volume information in cube often stores the average density information could lead to “patchy”distribution of density during the image reconstruction. In an attempt to alleviate this problem and explored the possibility of using VQ to represent the imformation contained within a cube. Considering the ease of accommodating the process of compressing the information during the generation of octrees from CAT scan slices, proposed use of wavelet transforms to generate the compressed information in a cube. The modified algorithm for generating octrees from the slices is shown to accommodate the eavelet compression easily. Rendering the stored information in the form of octree is a complex task, necessarily because of the requirement to display the volumetric information. The reys traced from each cube in the octree, sum up the density en-route, accounting for the opacities and transparencies produced due to variations in density.

The Press council

This study analyses the role of the Press Council as a champion and guard of free speech. It discusses the extent to which the Council succeeded in achieving its statutory objective of preserving the freedom of the press and maintaining and improving the standards of newspapers and news agencies. It also examines the inherent and in-built weaknesses of the Council and suggests ways and means for restructuring and enlarging its functions.

A Beacon based Localization System for Autonomous Mobile Robots and its Applications in Traffic and Transport Control

ACCURATE sensing of vehicle position and attitude is still a very challenging problem in many mobile robot applications. The mobile robot vehicle applications must have some means of estimating where they are and in which direction they are heading. Many existing indoor positioning systems are limited in workspace and robustness because they require clear lines-of-sight or do not provide absolute, driftfree measurements.The research work presented in this dissertation provides a new approach to position and attitude sensing system designed specifically to meet the challenges of operation in a realistic, cluttered indoor environment, such as that of an office building, hospital, industrial or warehouse. This is accomplished by an innovative assembly of infrared LED source that restricts the spreading of the light intensity distribution confined to a sheet of light and is encoded with localization and traffic information. This Digital Infrared Sheet of Light Beacon (DISLiB) developed for mobile robot is a high resolution absolute localization system which is simple, fast, accurate and robust, without much of computational burden or significant processing. Most of the available beacon's performance in corridors and narrow passages are not satisfactory, whereas the performance of DISLiB is very encouraging in such situations. This research overcomes most of the inherent limitations of existing systems.The work further examines the odometric localization errors caused by over count readings of an optical encoder based odometric system in a mobile robot due to wheel-slippage and terrain irregularities. A simple and efficient method is investigated and realized using an FPGA for reducing the errors. The detection and correction is based on redundant encoder measurements. The method suggested relies on the fact that the wheel slippage or terrain irregularities cause more count readings from the encoder than what corresponds to the actual distance travelled by the vehicle.The application of encoded Digital Infrared Sheet of Light Beacon (DISLiB) system can be extended to intelligent control of the public transportation system. The system is capable of receiving traffic status input through a GSM (Global System Mobile) modem. The vehicles have infrared receivers and processors capable of decoding the information, and generating the audio and video messages to assist the driver. The thesis further examines the usefulness of the technique to assist the movement of differently-able (blind) persons in indoor or outdoor premises of his residence.The work addressed in this thesis suggests a new way forward in the development of autonomous robotics and guidance systems. However, this work can be easily extended to many other challenging domains, as well.

Microwave studies of a poly vinyl acetate (PVA)-based phantom for applications in medical imaging

A phantom that exhibits complex dielectric properties similar to low-water-content biological tissues over the electromagnetic spectrum of 2000–3000 MHz has been synthesized from carbon black, graphite powder, and poly vinyl acetate (PVA)-based adhesive. The material overcomes various problems that are inherent in conventional phantoms such as decomposition and deterioration due to the invasion of bacteria or mold. The absorption coefficients of the material for various concentrations of carbon and graphite are studied. A combination of 50% poly-vinyl-acetate-based adhesive, 20% carbon, and 30% graphite exhibits a high absorption coefficient, which suggests another application of the material as a good microwave absorber for the interior lining of tomographic chamber in microwave imaging. The cavity-perturbation technique is adopted to study the dielectric properties of the material.

Dielectric studies of polyvinyl-acetate-based phantom for applications in microwave medical imaging

Phantoms that exhibit complex dielectric properties similar to low water content biological tissues over the electromagnetic spectrum of 2–3 GHz have been synthesized from carbon black powder, graphite powder and polyvinyl-acetate-based adhesive. The materials overcome various problems that are inherent in conventional phantoms such as decomposition and deterioration due to the invasion of bacteria or mold. The absorption coefficients of the materials for various compositions of carbon black and graphite powder are studied. A combination of 50% polyvinylacetate- based adhesive, 20% carbon black powder and 30% graphite powder exhibits high absorption coefficient, which suggests another application of the material as good microwave absorber for interior lining of tomographic chamber in microwave imaging. Cavity perturbation technique is adopted to study the dielectric properties of the material.

Fabrication of Electrochemical Sensors for Pharmaceutical Analysis

Potentiometric chemical sensors,an important class of electro-chemical sensors are widely used in pharmaceutical analysis because of its inherent advantages.The present study was aimed at fabrication of potentiometric sensors for the drugs mebendazole,pefloxacin,ambroxol,sildenafil citrate,dextro-methorphan and tetracycline.A total of 18 sensors have been developed for the determination of theses drugs.The major step in the fabrication of the sensor was the preparation of the ion association.Two types of sensors viz:PVC membrane sensor and carbon paste electode (CPE) were fabricated.The response characteristics of the different sensors fabricated were studied.Various response parameters studied include response time,selectivity and the effect of pH.The developed sensors were also employed for the determination of the drugs in pharmaceutical formulations and also for the recovery of the drug from urine samples.The selectivity studies reveal that the developed sensors are highly selective to the drug even in prescence of foreign ions.

Performance of Gabion Faced Reinforced Earth Retaining Walls

Gabion faced re.taining walls are essentially semi rigid structures that can generally accommodate large lateral and vertical movements without excessive structural distress. Because of this inherent feature, they offer technical and economical advantage over the conventional concrete gravity retaining walls. Although they can be constructed either as gravity type or reinforced soil type, this work mainly deals with gabion faced reinforced earth walls as they are more suitable to larger heights. The main focus of the present investigation was the development of a viable plane strain two dimensional non linear finite element analysis code which can predict the stress - strain behaviour of gabion faced retaining walls - both gravity type and reinforced soil type. The gabion facing, backfill soil, In - situ soil and foundation soil were modelled using 20 four noded isoparametric quadrilateral elements. The confinement provided by the gabion boxes was converted into an induced apparent cohesion as per the membrane correction theory proposed by Henkel and Gilbert (1952). The mesh reinforcement was modelled using 20 two noded linear truss elements. The interactions between the soil and the mesh reinforcement as well as the facing and backfill were modelled using 20 four noded zero thickness line interface elements (Desai et al., 1974) by incorporating the nonlinear hyperbolic formulation for the tangential shear stiffness. The well known hyperbolic formulation by Ouncan and Chang (1970) was used for modelling the non - linearity of the soil matrix. The failure of soil matrix, gabion facing and the interfaces were modelled using Mohr - Coulomb failure criterion. The construction stages were also modelled.Experimental investigations were conducted on small scale model walls (both in field as well as in laboratory) to suggest an alternative fill material for the gabion faced retaining walls. The same were also used to validate the finite element programme developed as a part of the study. The studies were conducted using different types of gabion fill materials. The variation was achieved by placing coarse aggregate and quarry dust in different proportions as layers one above the other or they were mixed together in the required proportions. The deformation of the wall face was measured and the behaviour of the walls with the variation of fill materials was analysed. It was seen that 25% of the fill material in gabions can be replaced by a soft material (any locally available material) without affecting the deformation behaviour to large extents. In circumstances where deformation can be allowed to some extents, even up to 50% replacement with soft material can be possible.The developed finite element code was validated using experimental test results and other published results. Encouraged by the close comparison between the theory and experiments, an extensive and systematic parametric study was conducted, in order to gain a closer understanding of the behaviour of the system. Geometric parameters as well as material parameters were varied to understand their effect on the behaviour of the walls. The final phase of the study consisted of developing a simplified method for the design of gabion faced retaining walls. The design was based on the limit state method considering both the stability and deformation criteria. The design parameters were selected for the system and converted to dimensionless parameters. Thus the procedure for fixing the dimensions of the wall was simplified by eliminating the conventional trial and error procedure. Handy design charts were developed which would prove as a hands - on - tool to the design engineers at site. Economic studies were also conducted to prove the cost effectiveness of the structures with respect to the conventional RCC gravity walls and cost prediction models and cost breakdown ratios were proposed. The studies as a whole are expected to contribute substantially to understand the actual behaviour of gabion faced retaining wall systems with particular reference to the lateral deformations.

Novel Approaches to Biodegradable Polymers: Synthesis and Biodegradation Studies

Biodegradable polymers have opened an emerging area of great interest because they are the ultimate solution for the disposal problems of synthetic polymers used for short time applications in the environmental and biomedical field. The biodegradable polymers available until recently have a number of limitations in terms of strength and dimensional stability. Most of them have processing problems and are also very expensive. Recent developments in biodegradable polymers show that monomers and polymers obtained from renewable resources are important owing to their inherent biodegradability, biocompatibility and easy availability. The present study is, therefore, mostly concemed with the utilization of renewable resources by effecting chemical modification/copolymerization on existing synthetic polymers/natural polymers for introducing better biodegradability and material properties.The thesis describes multiple approaches in the design of new biodegradable polymers: (1) Chemical modification of an existing nonbiodegradable polymer, polyethylene, by anchoring monosaccharides after functionalization to introduce biodegradability. (2) Copolymerization of an existing biodegradable polymer, polylactide, with suitable monomers and/or polymers to tailor their properties to suit the emerging requirements such as (2a) graft copolymerization of lactide onto chitosan to get controlled solvation and biodegradability and (2b) copolymerization of polylactide with cycloaliphatic amide segments to improve upon the thermal properties and processability.

Distribution, diversity and biology of deep-sea fishes in the Indian EEZ

This thesis Entitled distribution ,diversity and biology of deep-sea fishes the indian Eez.Fishing rights and responsibilities it entails in the deep-sea sector has been a vexed issue since the mid-nineties and various stakeholders have different opinion on the modalities of harnessing the marine fisheries wealth, especially from the oceanic and deeper waters. The exploitation and utilization of these esources requires technology development and upgradation in harvest and post-harvest areas; besides shore infrastructure for berthing, handling, storing and processing facilities. At present, although deep-sea fishes don’t have any ready market in our country it can be converted into value added products. Many problems have so far confronted the deep-sea fishing sector not allowing it to reach its full potential. Hence, there should be a sound deep-sea fishing policy revolving round the upgradation of the capabilities of small scale fishermen, who have the inherent skills but do not have adequate support to develop themselves and to acquire vessels having the capability to operate in farther and deeper waters. Prospects for the commercial exploitation and utilization of deep-sea fishes were analyzed using SWOL analysis.

A Study of Morphological Operators with Applications

The present work deals with the A study of morphological opertors with applications. Morphology is now a.necessary tool for engineers involved with imaging applications. Morphological operations have been viewed as filters the properties of which have been well studied (Heijmans, 1994). Another well-known class of non-linear filters is the class of rank order filters (Pitas and Venetsanopoulos, 1990). Soft morphological filters are a combination of morphological and weighted rank order filters (Koskinen, et al., 1991, Kuosmanen and Astola, 1995). They have been introduced to improve the behaviour of traditional morphological filters in noisy environments. The idea was to slightly relax the typical morphological definitions in such a way that a degree of robustness is achieved, while most of the desirable properties of typical morphological operations are maintained. Soft morphological filters are less sensitive to additive noise and to small variations in object shape than typical morphological filters. They can remove positive and negative impulse noise, preserving at the same time small details in images. Currently, Mathematical Morphology allows processing images to enhance fuzzy areas, segment objects, detect edges and analyze structures. The techniques developed for binary images are a major step forward in the application of this theory to gray level images. One of these techniques is based on fuzzy logic and on the theory of fuzzy sets.Fuzzy sets have proved to be strongly advantageous when representing in accuracies, not only regarding the spatial localization of objects in an image but also the membership of a certain pixel to a given class. Such inaccuracies are inherent to real images either because of the presence of indefinite limits between the structures or objects to be segmented within the image due to noisy acquisitions or directly because they are inherent to the image formation methods.

Economic Impact of Land Reforms in Kerala

The main aim of the present thesis is to dig deep into the once existed tenurial conditions and legislations that were passed to remedy the evils connected with the tenurial Conditions and to highlight ace of the economic impacts of the land reform legislation introduced since 1956.The thesis states that although the misery and exploitation which afflict the rural people and injustice inherent in the social structure can be removed by the strict implementation of land reforms. it is not the single and definite way or liberating the peasantry from its fate. Reform in not an Utopia: it is only the product of a constellation of political and social forces. ‘This study covers a period of twenty four years - ie...1956-1980.

Packaging materials for shrimp, fish and fish products, their properties, selection and effect of different packaging materials on their shelf life

Packaging is important not only in extending the shellife of fish and fishery products but also improving their marketability. In the recent years, significant development have taken place in the packaging industry. During the past decade in India, there is almost a packaging revolution with the availability of variety packaging materials, thus generating better packaging consciousness in other producer/manufacturing industries. But unfortunately, such realisation is not forthcoming in the fisheries sector and packaging techniques for local and export trade continues to be on traditional lines with their inherent drawbacks and limitations. Better packaging ensures improved quality and presentation of the products and ensures higher returns to the producer. Among several packaging materials used in fishery industry, ISI specifications had been formulated only for corrugated fibre board boxes for export of seafoods and froglegs. This standard was formulated before containersiation came into existance in the export of marine products. Before containerisation, the standards were stringent in view of the rough handling, transportation and storage. Two of the common defects reported in the master cartons exported from India are low mechanical strength and tendency to get wet. They are weakened by the deposits of moisture caused by temperature fluctuations during loading, unloading and other handling stages. It is necessary to rectify the above defects in packaging aquatic products and hence in the present study extensive investigations are carried out to find out the reasons for the damage of master cartons, to evolve code of practice for the packaging oi frozen shrimp for exports, development of alternative style of packaging for the shipping container, development of suitable consumer packaging materials for fish soup powder, cured dried mackeral, fish pickles in oil and frozen shrimp. For the development of suitable packaging materials, it is absolutely essential to know the properties of packaging materials, effect of different packaging materials on theirshelf life and their suitability for food contact applications.