969 resultados para Gospel according to the Hebrews


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O objetivo deste trabalho foi verificar a possibilidade de transferência de resistência aos antimicrobianos entre bactérias normais da microbiota de frangos e Salmonella Enteritidis. Utilizamos amostras de Lactobacillus spp. (L. spp.), Salmonella Enteritidis (SE) e Escherichia coli (E. coli) previamente isolados de frangos, selecionados após prova de sensibilidade antimicrobiana in vitro conforme metodologia padrão (Comitê Nacional para Padrões Clínicos de Laboratório). Utilizamos aqueles com resistência e sensibilidade aos antimicrobianos indutores, chamados de bactérias doadoras e receptoras, respectivamente. Os antimicrobianos indutores foram utilizados para estimular a transferência de resistência aos antimicrobianos entre as bactérias. A possibilidade de transferência foi verificada da E. coli resistente para a SE e L. spp. Também foi verificada a transferência de uma amostra de L. spp resistente aos antimicrobianos indutores para a SE. Só foi possível verificar a transferência da resistência aos antimicrobianos indutores quando a bactéria doadora foi a E. coli e a bactéria receptora foi a SE. No presente estudo concluímos que a transferência de resistência aos antimicrobianos entre bactérias é possível, mas nem todas as bactérias participam desse evento, não transmitindo e nem adquirindo esta resistência.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objective: Transitional implants are indicated for cases in which immediate loading is counter-indicated because a healing period is necessary for osseointegration of the definitive implants. These provisional implants were developed to support an implant-supported fixed prosthesis or overdenture to provide retention, stability, and support. The aim of this article was to conduct a literature review on transitional implants to highlight the characteristics of the transitional implants and their advantages, indications, and contraindications, including the level of osseointegration of such implants according to the functional period. Method and Materials: The present literature review was based on the OldMedline and Medline databases from 1999 to 2010 using the key words "transitional implants" and "temporary implants." Fourteen articles were found: 11 clinical studies or techniques and three histologic and histomorphometric studies. Results: The transitional immediate prostheses were worn by completely and partially edentulous patients. Advantages of transitional implants include complete denture retention, stability, and support; maintenance of chewing, phonetics, and patient comfort; protection of bone grafts; vertical stop during healing period; easy and fast surgical and prosthetic procedures; lower cost in comparison to the definitive implant; and reestablishment of esthetics. The success of transitional implants as conservative treatment for conventional immediate loading is a reality if correctly indicated. Conclusion: Transitional implants are a provisional treatment alternative for completely and partially edentulous patients. However, additional studies are required to evaluate the level of remodeling and repair of the transitional implants under loading. (Quintessence Int 2011; 42: 19-24)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study evaluated the microtensile bond strength test (mu T), micromorphology of resin-enamel interface (RET) and etching patterns (EP) promoted by the etch-and-rinse adhesive, Prime&Bond NT (PB), and two self-etching adhesives, Clearfil SE Bond (SE) and Adper Prompt L-Pop (APR), to ground bovine enamel surfaces' when applied at temperatures of 5 degrees C (C), 40 degrees C (H) and 20 degrees C (R). Materials and Methods. Sixty-three bovine incisors were randomly divided into nine experimental groups (n=7) according to adhesive systems and temperatures. The buccal enamel surfaces were flattened with 600-grit SiC paper and abraded with a diamond bur under water-cooling. The adhesive systems were applied according to the manufacturer's instructions. After the restorative procedures, the specimens were sectioned into five slabs. Four slabs were prepared for mu T and one for interface analysis. For etching pattern analysis, the remaining 16 bovine enamel fragments were used (n=2). The adhesives were applied and the surfaces were rinsed with organic solvents after application. The specimens for RET and EP analysis were prepared for SEM analysis. Results. No significant differences among the adhesives were found at R temperature. However, at 5 degrees C, PB and APR presented lower bond strength than SE. At H temperature, higher bond strength was observed for PB than for APR and SE. At C and H temperature, formation of the interdiffusion zone was impaired and the treated enamel surfaces presented an undefined EP.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In order to prolong the clinical longevity of resilient denture relining materials and reduce plaque accumulation, incorporation of antimicrobial agents into these materials has been proposed. However, this addition may affect their properties. Objective: This study evaluated the effect of the addition of antimicrobial agents into one soft liner (Soft Confort, Dencril) on its peel bond strength to one denture base (QC 20, Dentsply). Material and Methods: Acrylic specimens (n=9) were made (75x10x3 mm) and stored in distilled water at 37 degrees C for 48 h. The drug powder concentrations (nystatin 500,000U - G2; nystatin 1,000,000U - G3; miconazole 125 mg - G4; miconazole 250 mg - G5; ketoconazole 100 mg - G6; ketoconazole 200 mg - G7; chlorhexidine diacetate 5% - G8; and 10% chlorhexidine diacetate - G9) were blended with the soft liner powder before the addition of the soft liner liquid. A group (G1) without any drug incorporation was used as control. Specimens (n=9) (75x10x6 mm) were plasticized according to the manufacturers' instructions and stored in distilled water at 37 degrees C for 24 h. Relined specimens were then submitted to a 180-degree peel test at a crosshead speed of 10 mm/min. Data (MPa) were analyzed by analysis of variance (alpha=0.05) and the failure modes were visually classified. Results: No significant difference was found among experimental groups (p=0.148). Cohesive failure located within the resilient material was predominantly observed in all tested groups. Conclusions: Peel bond strength between the denture base and the modified soft liner was not affected by the addition of antimicrobial agents.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Background and Objective: Rests of Malassez are clusters of epithelial cells that remain in the periodontal ligament throughout life. However, it has been reported that the number of these structures decreases with age, and some epithelial cells undergo apoptosis in rests of Malassez of young and adult rats. Therefore, the purpose of the present study was to investigate the incidence of epithelial cell death and the quantitative changes in the rests of Malassez in rat molars of different ages.Material and Methods: Fragments containing the upper molars of rats aged 29, 45 and 120 d were fixed, decalcified and embedded for analysis by light microscopy. In the sections stained by hematoxylin and eosin, the number of rests of Malassez and the number of nuclei of these epithelial structures were obtained. Moreover, the nuclei exhibiting typical features of cell death were also counted in each rest of Malassez. The terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling (TUNEL) method for detection of cell death was also carried out.Results: In all groups examined, some rests of Malassez exhibited epithelial cell nuclei with typical features of apoptosis and some of them were also TUNEL positive. From 29 to 120 d of age in rats, the quantitative analysis showed a significant decrease in the total number of rests of Malassez in the cervical, middle and furcation regions of the periodontal ligament. Moreover, a significant decrease of epithelial cell nuclei was concomitant to an increase in the frequency of cell death in the oldest rats.Conclusion: These results suggest that epithelial cell death by apoptosis may be, at least in part, responsible for the reduction in the number of rests of Malassez according to age.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Introduction: The aim of this study was to evaluate the ability of Resilon (Resilon Research, LLC, North Branford, CT) and 2 types of gutta-percha to fill simulated lateral canals when using the Obtura II system (Model 823-700; Obtura Spartan, Fenton, MO). Methods: Forty-five human single-rooted teeth were selected and subjected to root canal preparation. After that, simulated lateral canals were made at 2, 5, and 8 mm from the working length (WL). The specimens were divided into 3 groups (n = 15) according to the filling material used: Obtura Flow 150 gutta-percha (Obtura flow), Odous Endo Flow gutta-percha (Odous; Odous de Deus Ind e Corn. Ltda Belo Horizonte, MG, Brazil), and Resilon pellets (Resilon). Root canals were filled using the Obtura II system with the tip inserted to 3 mm from the WL. No sealer was used for root canal obturation. Specimens were subjected to a tooth decalcification and clearing method, and filling of the lateral canals was analyzed by digital radiography and photographs. The measurement of lateral canal filling was done using Image Tool software (UTHSCSA Image Tool for Windows version 3.0, San Antonio, TX). Data were statistically analyzed with the Kruskal-Wallis test at 5% significance. Results: All materials showed an ability to penetrate into the simulated lateral canals, with a minimum percentage of 73% in all thirds of the root canal. Conclusions: It was concluded that gutta-percha and Resilon are solid core materials with a lateral canal filling ability when used with the Obtura II system. (J Endod 2012;38:676-679)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Os triatomíneos são insetos pertencentes à ordem Hemiptera, subordem Heteroptera, família Reduviidae e subfamília Triatominae. Todos os membros desta subfamília são hematófagos. Os triatomíneos surgiram a partir de reduvídeos predadores e provavelmente têm origem polifilética. A combinação dos fatores anatômicos, fisiológicos e etológicos presentes no grupo, bem como os caracteres plésio e apomórficos que diferenciam as cinco tribos e os quatorze gêneros de triatomíneos reforçam a hipótese polifilética. As tribos Rhodniini, Cavernicolini, Bolboderini, Linshcosteini e Alberproseniini constituem grupos monofiléticos, per si, enquanto a tribo Triatomini é considerada polifilética. O Novo Mundo é claramente o centro de diversidade dos triatomíneos e possivelmente é a região de sua origem. Entre as aproximadamente 129 espécies desses insetos, 105 ocorrem somente nas Américas. Atualmente, os triatomíneos são considerados um grupo polifilético, definido com base em seus caracteres apomórficos convergentes relacionados à hematofagia. Acredita-se que este hábito alimentar tenha surgido várias vezes nos Reduviidae durante sua evolução. O presente trabalho faz uma revisão sobre a filogenia destes vetores da Doença de Chagas, aborda tópicos como a origem da hematofagia nos triatomíneos e ancestralidade proposta para o grupo.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)