Risk analysis in aquaculture: A step-by-step introduction with worked examples

This publication is based on materials covered and outputs generated during the Workshop on Risk Assessment Methodologies and Tools for Aquaculture in Sub-Saharan Africa, which was jointly held by WorldFish and FAO in Siavonga, Zambia on 28 June - 2 July 2010. The workshop was delivered as a training exercise to 17 participants from seven sub-Saharan countries and was designed to highlight current methodologies and tools available for environmental risk analysis in aquaculture development. A key focus of the workshop was to encourage participants to consider hypothetical but realistic scenarios and to discuss issues relevant to evaluating the environmental risks of a given activity or scenario. This publication presents selected scenarios from the workshop and the outcomes of the deliberative process as developed by the participants. This publication is factual but not comprehensive, therefore any statements or estimations of risk do not represent the actual risks arising from the described scenario. It is intended to serve as an easily readable introduction to risk analysis, highlighting worked examples that will provide guidance on how a risk analysis may be approached in a similar situation.

Some examples of multiple solutions in limiting flaw calculations using PD6493:1991 fracture mechanics analyses

The use of PC-based PD6493:1991 fracture assessment procedures has revealed that, under certain circumstances, flaws of different dimensions may be found as being limiting or critical for identical applied conditions. The main causes for multiple solutions are a steep applied stress gradient, residual stress relaxation and flaw re-characterisation. This work uses several case studies to illustrate some of the circumstances under which multiple solutions occurs.

Studies on the preparation of fish silage. 1. Effect of quality of raw material and type of acid

An experiment was undertaken in which silver bellies (Leiognathus splendens) of different quality were used to produce silages using different concentrations of hydrochloric acid and formic acid. The quality and storage life of the various preparations are reported. Silages which keep for at least 30 days can be produced from silver belly held for 3 or 12 hours at 28°C by: 1) reducing the pH by addition of hydrochloric acid; 2) adding 0.5% formic acid and reducing the pH to 3.5 with hydrochloric acid; or 3) adding 2.5% formic acid.

Molecular cloning, characterization and localization of chicken type II procollagen gene

Chicken type II procollagen (ccol2a1) has become as an important oral tolerance protein for effective treatment of rheumatoid arthritis. However, its molecular identity remains unclear. Here, we reported the full-length cDNA and nearly complete genomic DN

Functional characterization of the human-specific (type II) form of kallikrein 8, a gene involved in learning and memory

Kallikrein 8 (KLK8) is a serine protease functioning in the central nervous system, and essential in many aspects of neuronal activities. Sequence comparison and gene expression analysis among diverse primate species identified a human-specific splice for

Cloning of cDNAs encoding C-type lectins from Elapidae snakes Bungarus fasciatus and Bungarus multicinctus

A number of C-type lectins with various biological activities have been purified and characterized from Viperidae snake venoms. In contrast, only a few reports could be found in literature concerning the C-type lectins in Elapidae snake venoms. Based on t

Stejnulxin, a novel snake C-type lectin-like protein from Trimeresurus stejnegeri venom is a potent platelet agonist acting specifically via GPVl

Stejnulxin, a novel snake C-type lectin-like protein with potent platelet activating activity, was purified and characterized from Trimeresurus stejnegeri venom. Under non-reducing conditions, it migrated on a SDS-polyacrylamide gel with an apparent molecular mass of 120 kDa. On reduction, it separated into three polypeptide subunits with apparent molecular masses of 16 kDa (alpha), 20 kDa (beta(1)) and 22 kDa (beta(2)), respectively. The complete amino acid sequences of its subunits were deduced from cloned cDNAs. The N-terminal sequencing and cDNA cloning indicated that beta(1) and beta(2) subunits of stejnulxin have identical amino acid sequences and each contains two N-glycosylation sites. Accordingly, the molecular mass difference between 1 and 2 is caused by glycosylation heterogenity. The subunit amino acid sequences of stejnulxin are similar to those of convulxin, with sequence identities of 52.6% and 66.4% for the U. and beta, respectively. Stejnulxin induced human platelet aggregation in a dose-dependent manner. Antibodies against UNA inhibited the aggregation response to stejnulxin, indicating that activation of alpha(IIb)beta(3) and binding of fibrinogen are involved in stejnulxin-induced platelet aggregation. Antibodies against GPIbalpha or alpha(2)beta(1) as well as echicetin or rhodocetin had no significant effect on stejnulxin-induced platelet aggregation. However, platelet activation induced by stejnulxin was blocked by anti-GPVI antibodies. In addition, stejnulxin induced a tyrosine phosphorylation profile in platelets that resembled that produced by convulxin. Biotinylated stejnulxin bound specifically to platelet membrane GPVI.

TMVA, a snake C-type lectin-like protein from Trimeresurus mucrosquamatus venom, activates platelet via GPIb

TMVA is a C-type lectin-like protein with potent platelet activating activity from Trimeresurus mucrosquamatus venom. In the absence of von Willebrand factor (vWF), TMVA dose-dependently induced aggregation of washed platelets. Anti-GP Ib monoclonal antib

Incidence of ulcer type of disease in wild fishes of Bangladesh

Disease occurred in wild fish species investigated in different water bodies like canals, ditches, beel, haor, flood plain in 17 districts of Dhaka division. Haemorrhagic lesions were observed on the body surface of affected fishes. Incidence of the disease in the investigated water bodies ranged from 0 to 100%. In total 19 fish species were found to be affected and prevalence of infection ranged from 0.0 to 100.0%. Channa punctatus and Puntius ticto were severely affected in all locations. Percentage of infection in these fishes ranged from 0.0 to 100.0. The highest infection was observed in Netrokona, Kishoreganj, and Mymensingh districts. Bacterial genera isolated from the lesions of these affected fishes were Aeromonas, Pseudomonas, Flavobacterium, Micrococcus, and Staphylococcus. Among these isolates Aeromonas was the dominant. Abundance of Aeromonas in the lesions among the investigated bacteria ranged from 75 to 90%. Five identified Aero monas lrydrophila were examined for their pathogenicity and were able to infect the experimental fish, silver barb (Puntius gonionotus). The pathogen Aeromonas hydrophila was thus considered to have an association with the outbreak of ulcer type of disease in the investigated fish species.

Losses in self-oscillating ballasts for electrode-type compact fluorescent lamps

Commercially available integrated compact fluorescent lamps (CFLs) use self-resonant ballasts on grounds of simplicity and cost. To understand how to improve ballast efficiency, it is necessary to quantify the losses. The losses occurring in these ballasts have been directly measured using a precision mini-calorimeter. In addition, a Pspice model has been used to simulate the performance of an 18 W integrated CFL. The lamp has been represented by a behavioural model and Jiles-Atherton equations were used to model the current transformer core. The total loss is in close agreement with measurements from the mini-calorimeter, confirming the accuracy of the model. The total loss was then disaggregated into component losses by simulation, showing that the output inductor is the primary source of loss, followed by the inverter switches. © 2011 The Institution of Engineering and Technology.

Characterization and molecular cloning of dabocetin, a potent antiplatelet C-type lectin-like protein from Daboia russellii siamensis venom

A novel C-type lectin-like protein, dabocetin, was purified from Daboia russellii siamensis venom. On SDS-polyacrylamide gel electrophoresis, it showed a single band with an apparent molecular weight of 28 kDa and two distinct bands with the apparent mole

Molecular and functional characterization of a c-type lysozyme from the Asian corn borer, Ostrinia furnacalis

Some lepidopteran lysozymes have been reported to display activity against Gram-positive and Gram-negative bacteria, in contrast to most lysozymes that are active only against Gram-positive bacteria. OstrinLysC, a c-type lysozyme, was purified from the As

Purification and cloning of a novel C-type lectin-like protein with platelet aggregation activity from Trimeresurus mucrosquamatus venom

TMVA, a novel C-type lectin-like protein that induces platelet aggregation in a dose-dependent manner, was purified from the venom of Trimeresurus mucrosquamatus. It consists of two subunits, alpha (15,536 Da) and beta (14,873 Da). The mature amino acid sequences of the a (135 amino acids) and beta subunits (123 amino acids) were deduced from cloned cDNAs. Both of the sequences show great similarity to C-type lectin-like venom proteins, including a carbohydrate recognition domain. The cysteine residues of TMVA are conserved at positions corresponding to those of flavocetin-A and convulxin, including the additional Cys135 in the alpha subunit and Cys3 in the beta subunit. SDS-PAGE, mass spectrometry analysis and amino acid sequence showed that native TMVA exists as two convertible multimers Of (alphabeta)(2) and (alphabeta)(4) with molecular weights of 63,680 and 128,518 Da, respectively. The (alphabeta)(2) complex is stabilized by an interchain disulfide bridge between the two alphabeta-heterodimers, whereas the stabilization of the (alphabeta)(4) complex seems to involve non-covalent interactions between the (alphabeta)(2) complexes. (C) 2002 Elsevier Science Ltd. All rights reserved.