Intellectual Property Chapter in Part 18: Intellectual Property and Communications

This chapter addresses the areas more commonly found in everyday practice (NB circuit layouts and plant breeder's rights are not covered). Importantly, IP law has become very specialised, and as such one for which practitioners will need expertise or access to relevant experts in order to properly provide advice. The following therefore is an overview only of relevant issues.

Doctors shouldn’t be forced to dob in unfit drivers

Few states mandate that doctors or other health professionals must report unfit drivers to licensing authorities – and for good reason. Driving is an everyday practice for many Australians, but that doesn’t mean it’s a simple task. It takes several years for crash rates among young drivers to decline, and driving performance can be affected at any time by fatigue, distraction and impairment by alcohol or drugs...

The structure of Norway spruce (Picea abies [L.] Karst.) stems in relation to wood properties of sawn timber

An important challenge in forest industry is to get the appropriate raw material out from the forests to the wood processing industry. Growth and stem reconstruction simulators are therefore increasingly integrated in industrial conversion simulators, for linking the properties of wooden products to the three-dimensional structure of stems and their growing conditions. Static simulators predict the wood properties from stem dimensions at the end of a growth simulation period, whereas in dynamic approaches, the structural components, e.g. branches, are incremented along with the growth processes. The dynamic approach can be applied to stem reconstruction by predicting the three-dimensional stem structure from external tree variables (i.e. age, height) as a result of growth to the current state. In this study, a dynamic growth simulator, PipeQual, and a stem reconstruction simulator, RetroSTEM, are adapted to Norway spruce (Picea abies [L.] Karst.) to predict the three-dimensional structure of stems (tapers, branchiness, wood basic density) over time such that both simulators can be integrated in a sawing simulator. The parameterisation of the PipeQual and RetroSTEM simulators for Norway spruce relied on the theoretically based description of tree structure developing in the growth process and following certain conservative structural regularities while allowing for plasticity in the crown development. The crown expressed both regularity and plasticity in its development, as the vertical foliage density peaked regularly at about 5 m from the stem apex, varying below that with tree age and dominance position (Study I). Conservative stem structure was characterized in terms of (1) the pipe ratios between foliage mass and branch and stem cross-sectional areas at crown base, (2) the allometric relationship between foliage mass and crown length, (3) mean branch length relative to crown length and (4) form coefficients in branches and stem (Study II). The pipe ratio between branch and stem cross-sectional area at crown base, and mean branch length relative to the crown length may differ in trees before and after canopy closure, but the variation should be further analysed in stands of different ages and densities with varying site fertilities and climates. The predictions of the PipeQual and RetroSTEM simulators were evaluated by comparing the simulated values to measured ones (Study III, IV). Both simulators predicted stem taper and branch diameter at the individual tree level with a small bias. RetroSTEM predictions of wood density were accurate. For focusing on even more accurate predictions of stem diameters and branchiness along the stem, both simulators should be further improved by revising the following aspects in the simulators: the relationship between foliage and stem sapwood area in the upper stem, the error source in branch sizes, the crown base development and the height growth models in RetroSTEM. In Study V, the RetroSTEM simulator was integrated in the InnoSIM sawing simulator, and according to the pilot simulations, this turned out to be an efficient tool for readily producing stand scale information about stem sizes and structure when approximating the available assortments of wood products.

Median muotoilema : Muotoilun mediajulkisuus suomalaisessa talouslehdistössä

Designed by the Media The Media publicity of Design in the Finnish Economic Press The meaning of design has increased in consumer societies. Design is the subject of debate and the number of media discussions has also increased steadily. Especially the role of industrial design has been emphasised. In this study I examine the media publicity of design in the Finnish economic press from the late 1980s to the beginning of the 2000s. The research question is connected to media representations: How is design represented in the Finnish economic press? In other words, what are the central topics of design in the economic press, and to what issues are the media debates connected? The usually repeated phrase that design discussions take place only on the cultural pages of the daily press or in cultural contexts is being changed. Design is also linked to the consumer culture and consumers everyday practices. The research material has been collected from the Finnish economic press. The qualitative sample consists of articles from Kauppalehti, Taloussanomat and from several economic papers published by the Talentum Corporation. The approach of the research is explorative, descriptive and hermeneutic. This means that the economic press articles are used to explore how design is represented in the media. In addition, the characteristics of design represented in the media are described in detail. The research is based on the interpretive tradition of studying textual materials. Background assumptions are thus grounded in hermeneutics. Erving Goffman s frame analysis is applied in analysing the economic press materials. The frames interpreted from the articles depict the media publicity of design in the Finnish economic press. The research opens up a multidimensional picture of design in the economic press. The analysis resulted in five frames that describe design from various points of view. In the personal frame designers are described in private settings and through their personal experiences. The second frame relates to design work. In the frame of mastery of the profession, the designers work is interpreted widely. Design is considered from the aspects of controlling personal know-how, co-operation and the overall process of design. The third frame is connected to the actual substance of the economic press. In the frame of economy and market, design is linked to international competitiveness, companies competitive advantage and benefit creation for the consumers. The fourth frame is connected to the actors promoting design on a societal level. In the communal frame, the economic press describes design policy, design research and education and other actors that actively develop design in the societal networks. The last frame is linked to the traditions of design and above all to the examination of the cultural transition. In the frame of culture the traditions of design are emphasised. Design is also connected to the industrial culture and furthermore to the themes of the consumer culture. It can be argued that the frames construct media publicity of design from various points of view. The frames describe situations, action and the actors of design. The interpreted media frames make it possible to understand the relation of interpreted design actions and the culture. Thus, media has a crucial role in representing and recreating meanings related to design. The publicity of design is characterised by the five focal themes: personification, professionalisation, commercialisation, communalisation and transition of cultural focus from the traditions of design to the industrial culture and the consumer culture. Based on my interpretation these themes are guided by the mediatisation of design. The design phenomenon is defined more often on the basis of the media representations in the public discourses. The design culture outlined in this research connects socially constructed and structurally organised action. Socially constructed action in design is connected to the experiences, social recreation and collective development of design. Structurally, design is described as professional know-how, as a process and as an economic profit generating action in the society. The events described by the media affect the way in which people experience the world, the meanings they connect to the events around themselves and their life in the world. By affecting experiences, the media indirectly affects human actions. People have become habituated to read media representations on a daily basis, but they are not used to reading and interpreting the various meanings that are incorporated in the media texts.

Digital access to knowledge in the preschool classroom: Reports from Australia

Australian preschool teachers’ use of Web-searching in their classroom practice was examined (N = 131). Availability of Internet-enabled digital technology and the contribution of teacher demographic characteristics, comfort with digital technologies and beliefs about their use were assessed. Internet-enabled technologies were available in 53% (n = 69) of classrooms. Within these classrooms, teacher age and beliefs predicted Web-searching practice. Although comfortable with digital access of knowledge in their everyday life, teachers reported less comfort with Web-searching in the context of their classroom practice. The findings identify the provision of Internet-enabled technologies and professional development as actions to support effective and confident inclusion of Web-searching in classrooms. Such actions are necessary to align with national policy documents that define acquisition of digital literacies as a goal and assert digital access to knowledge as an issue of equity.

Consumers and the conceptual and practical appropriation of functional foods

Taking the appropriation of objects as a theoretical starting point, this study makes a distinction between a conceptual and practical level of adopting new objects and products in everyday life. The study applies the concept of appropriation in social food research and examines consumers appropriation of functional foods, i.e., foods developed to improve health and well-being or reduce the risk of disease beyond the usual nutritional effects of foods. The study uses the concept of appropriation to understand the adoption and the process of making functional foods our own . First, the study focuses on the conceptual appropriation by analysing consumers interpretations and opinions on functional foods. Second, it analyses the use of functional foods and examines the role of sociodemographic and food- and health-related background factors in the use of functional foods. Both quantitative and qualitative data were used in the study. Altogether 1210 Finns representative of the population took part in a survey carried out in 2002 as computer-assisted telephone interviews (CATI). The survey examined the acceptability and use of functional foods in Finland. In 2004, eight focus group discussions were organised for 45 users and non-users of cholesterol-lowering spreads. The qualitative study focused on consumers interpretative perspectives on healthy eating and functional foods. The findings are reported in four original articles and a summary article. The results show that the appropriation of functional foods is a multifaceted phenomenon. The conceptual appropriation is related to consumers interpretations of functional foods in the context of healthy foods and healthy eating; their trust in the products, their manufacturers, research and control; and the relationship of functional foods and the ideal of natural foods. The analysis of the practical appropriation of four different types of foods marketed as functional showed that there are sociodemographic differences between users and non-users of the products, but more importantly, the differences are related to consumers food- and health-related views and practices. Consumers ways of appropriating functional foods in the conceptual and practical sense take shape in a complex web of ideas and everyday practices concerning food, health and eating as a whole. The results also indicate that the conceptual and practical appropriation are not necessarily uniform or coherent processes. Consumers interpret healthy eating and functional foods from a variety of perspectives and there is a multiplicity of rationales of using functional foods. Appropriation embraces many opposing dimensions simultaneously: good experiences and doubts, approval and criticism, expectations and things taken for granted.

The culture digitally festival of memeology: An introduction

The collection of essays set to roll out on Culture Digitally over the next month began its life as a pair of panels spanning the last two annual meetings of the International Communication Association. At the 2014 meetings in Seattle, Washington and the 2015 meetings in San Juan, Puerto Rico, various configurations of the contributors in this collection met to discuss the cultures and communicative practices associated with internet memes and viral media. Our shared goal was to bring smart people together to start to think about these digital media genres—still emerging only a few years ago and now seemingly ubiquitous—above the level of the individual example. Together, we asked questions about how internet memes and viral media might be defined, their roles in popular culture, their relationships to far older scientific and scholarly traditions, and their public implications. Two years and two discussions that ended too quickly later, we decided to write up some of our key arguments from the panels. We’ve compiled these write-ups here, in what we’ve taken to calling “The Culture Digitally Festival of Memeology.” - See more at: http://culturedigitally.org/2015/10/00-the-culture-digitally-festival-of-memeology-an-introduction-ryan-m-milner-jean-burgess/#sthash.2KzDogso.dpuf

“Let’s see if you can see me”: Making connections with Google Earth™ in a preschool classroom

Bringing a social interaction approach to children’s geographies to investigate how children accomplish place in everyday lives, we draw on ethnomethodological and conversation analytic approaches that recognize children’s competence to manipulate their social and digital worlds. An investigation of preschool-aged children engaged with Google Earth™ shows how they both claimed and displayed technological understandings and practices such as maneuvering the mouse and screen, and referenced place through relationships with local landmarks and familiar settings such as their school. At times, the children’s competing agendas required orientation to each other’s ideas, and shared negotiation to come to resolution. A focus on children’s use of digital technologies as they make meaning of the world around them makes possible new understandings of place within the geographies of childhood and education.

Polymerization of Ethene and Branched α-olefins with Group IV Metal Complexes Bearing Nitrogen- and Oxygen-Based Ligands

The commodity plastics that are used in our everyday lives are based on polyolefin resins and they find wide variety of applications in several areas. Most of the production is carried out in catalyzed low pressure processes. As a consequence polymerization of ethene and α-olefins has been one of the focus areas for catalyst research both in industry and academia. Enormous amount of effort have been dedicated to fine tune the processes and to obtain better control of the polymerization and to produce tailored polymer structures The literature review of the thesis concentrates on the use of Group IV metal complexes as catalysts for polymerization of ethene and branched α-olefins. More precisely the review is focused on the use of complexes bearing [O,O] and [O,N] type ligands which have gained considerable interest. Effects of the ligand framework as well as mechanical and fluxional behaviour of the complexes are discussed. The experimental part consists mainly of development of new Group IV metal complexes bearing [O,O] and [O,N] ligands and their use as catalysts precursors in ethene polymerization. Part of the experimental work deals with usage of high-throughput techniques in tailoring properties of new polymer materials which are synthesized using Group IV complexes as catalysts. It is known that the by changing the steric and electronic properties of the ligand framework it is possible to fine tune the catalyst and to gain control over the polymerization reaction. This is why in this thesis the complex structures were designed so that the ligand frameworks could be fairly easily modified. All together 14 complexes were synthesised and used as catalysts in ethene polymerizations. It was found that the ligand framework did have an impact within the studied catalyst families. The activities of the catalysts were affected by the changes in complex structure and also effects on the produced polymers were observed: molecular weights and molecular weight distributions were depended on the used catalyst structure. Some catalysts also produced bi- or multi-modal polymers. During last decade high-throughput techniques developed in pharmaceutical industries have been adopted into polyolefin research in order to speed-up and optimize the catalyst candidates. These methods can now be regarded as established method suitable for both academia and industry alike. These high-throughput techniques were used in tailoring poly(4-methyl-1-pentene) polymers which were synthesized using Group IV metal complexes as catalysts. This work done in this thesis represents the first successful example where the high-throughput synthesis techniques are combined with high-throughput mechanical testing techniques to speed-up the discovery process for new polymer materials.

The experience of Indigenous students in a Bachelor of Nursing Program in Australia: cultural safety and decolonising nurse education

Background In Australia significant health inequalities, such as an 11year life expectancy gap, impact on the continent’s traditional owners, the Aboriginal peoples and Torres Strait Islanders. Evidence suggests links between improved Indigenous health and a greater proportion of Indigenous people employed in all sectors. Achieving a greater proportion of Indigenous people in health services and in the health education workforce, requires improved higher education completion rates. Currently Indigenous people are under-represented in higher education and attrition rates amongst those who do participate are high. We argue these circumstances make health and education matters of social justice, largely related to unexamined relations of power within universities where the pedagogical and social environment revolve around the norms and common-sense of the dominant culture. Project Research at Queensland University of Technology in 2010-2012, aimed to gain insights into attrition/retention in the Bachelor of Nursing. A literature review on Indigenous participation in higher education in nursing contextualised a mixed methods study. The project examined enrolment, attrition and success by an analysis of enrolment data from 1984-2012. Using Indigenous Research Assistants we then conducted 20 in-depth interviews with Indigenous students followed by a thematic analysis seeking to gain insights into the impact of students’ university experience on retention. Our findings indicate that cultural safety, mentorship, acceptance and support are crucial in student academic success. They also indicate that inflexible systems based on ethnocentric assumptions exacerbate the structural issues that impact on the students’ everyday life and are also part of the story of attrition. The findings reinforced the assumption that educational environments and processes are inherently cultural and political. This perspective calls into question the role of the students’ cultural experience at university in attrition rates. A partnership between the School of Nursing and the Indigenous Education Unit is working to better support Indigenous students.

Deeply superficial digital media engagement? The case of Twitter and Movember 2013

Using activity generated with Twitter during Movember 2013, we interrogate the natures of superficiality running through what can be defined as a highly successful public health engagement intervention. Indeed, Movember arguably has not just been successful in one year in terms of raising funds for the causes it is concerned with, it has done this year-on-year since 2004. We tracked the keyword 'movember' (without the hash symbol) using an in-house installation of YourTwapperkeeper hosted on a NECTAR server. Data collection ran from 01 October - 04 December 2013, covering the ramp-up and wind-down periods of the event. We collected a total of 1,313,426 tweets from 759,345 unique users.

Distortion of Dimension under Quasiconformal Mappings

Quasiconformal mappings are natural generalizations of conformal mappings. They are homeomorphisms with 'bounded distortion' of which there exist several approaches. In this work we study dimension distortion properties of quasiconformal mappings both in the plane and in higher dimensional Euclidean setting. The thesis consists of a summary and three research articles. A basic property of quasiconformal mappings is the local Hölder continuity. It has long been conjectured that this regularity holds at the Sobolev level (Gehring's higher integrabilty conjecture). Optimal regularity would also provide sharp bounds for the distortion of Hausdorff dimension. The higher integrability conjecture was solved in the plane by Astala in 1994 and it is still open in higher dimensions. Thus in the plane we have a precise description how Hausdorff dimension changes under quasiconformal deformations for general sets. The first two articles contribute to two remaining issues in the planar theory. The first one concerns distortion of more special sets, for rectifiable sets we expect improved bounds to hold. The second issue consists of understanding distortion of dimension on a finer level, namely on the level of Hausdorff measures. In the third article we study flatness properties of quasiconformal images of spheres in a quantitative way. These also lead to nontrivial bounds for their Hausdorff dimension even in the n-dimensional case.

Whiteness scholarship in early childhood education

This paper explores how whiteness scholarship can support deep engagement with both historical and contemporary forms of whiteness and racism in early childhood education. To this point, the uptake of whiteness scholarship in the field of early childhood has focused predominantly on autobiographical narratives. These narratives recount white educators’ stories of ‘becoming aware’ or ‘unmasking’ their whiteness. In colonising contexts including Australia, New Zealand and Canada, understanding how whiteness operates in different ways and what this means for educational research and practice, can support researchers and educators to identify and describe more fully the impacts of subtle forms of racism in their everyday practices. In this paper, whiteness is explored in a broader sense as: a form of property; an organising principle for institutional behaviours and practices; and as a fluid identity or subject position. These three intersecting elements of whiteness are drawn on to analyse data from a doctoral study about embedding Aboriginal and Torres Strait Islander perspectives in early childhood education curricula in two Australian urban childcare settings. Analysis is focused on how whiteness operated within the research site and research processes, along with the actions, inaction and talk of two educators engaged in embedding work. Findings show that both the researcher and educators reinforced, rather than reduced the impacts of whiteness and racism, despite the best of intentions.

Data mining for telecommunications network log analysis

Telecommunications network management is based on huge amounts of data that are continuously collected from elements and devices from all around the network. The data is monitored and analysed to provide information for decision making in all operation functions. Knowledge discovery and data mining methods can support fast-pace decision making in network operations. In this thesis, I analyse decision making on different levels of network operations. I identify the requirements decision-making sets for knowledge discovery and data mining tools and methods, and I study resources that are available to them. I then propose two methods for augmenting and applying frequent sets to support everyday decision making. The proposed methods are Comprehensive Log Compression for log data summarisation and Queryable Log Compression for semantic compression of log data. Finally I suggest a model for a continuous knowledge discovery process and outline how it can be implemented and integrated to the existing network operations infrastructure.

Middleware for Mobile Sensing Applications in Urban Environments

Sensor networks represent an attractive tool to observe the physical world. Networks of tiny sensors can be used to detect a fire in a forest, to monitor the level of pollution in a river, or to check on the structural integrity of a bridge. Application-specific deployments of static-sensor networks have been widely investigated. Commonly, these networks involve a centralized data-collection point and no sharing of data outside the organization that owns it. Although this approach can accommodate many application scenarios, it significantly deviates from the pervasive computing vision of ubiquitous sensing where user applications seamlessly access anytime, anywhere data produced by sensors embedded in the surroundings. With the ubiquity and ever-increasing capabilities of mobile devices, urban environments can help give substance to the ubiquitous sensing vision through Urbanets, spontaneously created urban networks. Urbanets consist of mobile multi-sensor devices, such as smart phones and vehicular systems, public sensor networks deployed by municipalities, and individual sensors incorporated in buildings, roads, or daily artifacts. My thesis is that "multi-sensor mobile devices can be successfully programmed to become the underpinning elements of an open, infrastructure-less, distributed sensing platform that can bring sensor data out of their traditional close-loop networks into everyday urban applications". Urbanets can support a variety of services ranging from emergency and surveillance to tourist guidance and entertainment. For instance, cars can be used to provide traffic information services to alert drivers to upcoming traffic jams, and phones to provide shopping recommender services to inform users of special offers at the mall. Urbanets cannot be programmed using traditional distributed computing models, which assume underlying networks with functionally homogeneous nodes, stable configurations, and known delays. Conversely, Urbanets have functionally heterogeneous nodes, volatile configurations, and unknown delays. Instead, solutions developed for sensor networks and mobile ad hoc networks can be leveraged to provide novel architectures that address Urbanet-specific requirements, while providing useful abstractions that hide the network complexity from the programmer. This dissertation presents two middleware architectures that can support mobile sensing applications in Urbanets. Contory offers a declarative programming model that views Urbanets as a distributed sensor database and exposes an SQL-like interface to developers. Context-aware Migratory Services provides a client-server paradigm, where services are capable of migrating to different nodes in the network in order to maintain a continuous and semantically correct interaction with clients. Compared to previous approaches to supporting mobile sensing urban applications, our architectures are entirely distributed and do not assume constant availability of Internet connectivity. In addition, they allow on-demand collection of sensor data with the accuracy and at the frequency required by every application. These architectures have been implemented in Java and tested on smart phones. They have proved successful in supporting several prototype applications and experimental results obtained in ad hoc networks of phones have demonstrated their feasibility with reasonable performance in terms of latency, memory, and energy consumption.