Macrophage suppression following phagocytosis of apoptotic neutrophils is mediated by the S100A9 calcium-binding protein

The clearance of apoptotic cells by phagocytes is a fundamental process during tissue remodeling and resolution of inflammation. In turn, the phagocytosis of apoptotic cells generates signals that suppress pro-inflammatory activation of macrophages. These events occur during the resolution phase of inflammation and therefore the malfunctioning of this process may lead to inflammation-related tissue damage. Here, we demonstrate that the calcium-binding protein S100A9, normally abundant in the cytoplasm of neutrophils and also released by apoptotic neutrophils, is involved in the suppression of macrophages after the uptake of apoptotic neutrophils. Both, spontaneous and induced production of inflammatory species (nitric oxide, hydrogen peroxide and TNF-alpha) as well as the phagocytic activity were inhibited when macrophages were in presence of apoptotic neutrophils, conditioned medium from neutrophil cultures or a peptide corresponding to the C-terminal region of S100A9 protein. On the other hand, macrophages kept in the conditioned medium of neutrophils that was previously depleted of S100A9 were shown to resume the activated status. Finally, we demonstrate that the calcium-binding property of S100A9 might play a role in the suppression process, since the stimulation of intracellular calcium release with ionomycin significantly reversed the effects of the uptake of apoptotic neutrophils in macrophages. In conclusion, we propose that S100A9 is a novel component of the regulatory mechanisms of inflammation, acting side-by-side with other suppressor factors generated upon ingestion of apoptotic cells. (C) 2009 Elsevier GmbH. All rights reserved.

Dosimetric properties of UV irradiated calcium co-doped borate glass-ceramic

The thermoluminescence (TL) response of Dy and Li doped 20CaB(4)O(7)-80CaB(2)O(4) (Wt%) glass-ceramic irradiated with ultraviolet (UV) radiation was studied. In order to act as TL activator ions, the Dy and Li ions were included in the matrix during the melting process to increase its TL efficiency. A single crystalline CaB2O4 phase was present in the glass-ceramic as determined by X-ray diffraction (XRD). The glass-ceramic 20CaB(4)O(7)-80CaB(2)O(4):Dy,Li wt% (named 20CBO7:Dy,Li) is a newly prepared TL material. Its thermoluminescent dosimetric characteristics have shown a linear response under UV radiation exposure and a good TL signal reproducibility, thus proving to be a promising material for using as an ultraviolet radiation dosimeter. (C) 2007 Elsevier B.V. All rights reserved.

Development of impedimetric and optical calcium biosensor by using modified gold electrode with porcine S100A12 protein

We describe the development of a label free method to analyze the interactions between Ca(2+) and the porcine S100A12 protein immobilized on polyvinyl butyral (PVB). The modified gold electrodes were characterized using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and surface plasmon resonance (SPR) techniques. SEM analyses of PVB and PVB-S100A12 showed a heterogeneous distribution of PVB spherules on gold surface. EIS and CV measurements have shown that redox probe reactions on the modified gold electrodes were partially blocked due the adsorption of PVB-S100A12, and confirm the existence of a positive response of the immobilized S100Al2 to the presence of calcium ions. The biosensor exhibited a wide linear response to Ca(2+) concentrations ranging from 12.5 to 200 mM. The PVB-S100A12 seems to be bound to the gold electrode surface by physical adsorption: we observed an increase of 1184.32 m degrees in the SPR angle after the adsorption of the protein on the PVB surface (in an indication that 9.84 ng of S100A12 are adsorbed per mm(2) of the Au-PVB electrode), followed by a further increase of 581.66 m degrees after attachment of the Ca(2+) ions. In addition, no SPR response is obtained for non-specific ions. These studies might be useful as a platform for the design of new reusable and sensitive biosensing devices that could find use in the clinical applications. (C) 2010 Elsevier B.V. All rights reserved.

The use of colloidal ferrofluid as building blocks for nanostructured layer-by-layer films fabrication

The electrostatic layer-by-layer technique has been exploited as an useful strategy for fabrication of nanostructured thin films, in which specific properties can be controlled at the molecular level. Ferrofluids consist of a colloidal suspension of magnetic grains (with only a few nanometers of diameter) with present interesting physical properties and applications, ranging from telecommunication to drug delivery systems. In this article, we developed a new strategy to manipulate ferrofluids upon their immobilization in nanostructured layered films in conjunction with conventional polyelectrolytes using the layer-by-layer technique. We investigated the morphological, optical, and magnetic properties of the immobilized ferrofluid as a function of number of bilayers presented in the films. Ferrofluid/polyelectrolyte multilayers homogeneously covered the substrates surface, and the magnetic and optical properties of films exhibited a linear dependence on the number of bilayers adsorbed.

Study on the observation of Eu(2+) and Eu(3+) valence states in low silica calcium aluminosilicate glasses

The optical, magnetic and structural properties of Eu doped low silica calcium aluminosilicate glasses were investigated. The optical absorption coefficient presented two bands at 39 246 and 29 416 cm(-1), which were assigned respectively to the 4f(7) ((8)S(7/2)) -> 4f(6) (4F(J)) 5d (T(2g)), and 4f(7) ((8)S(7/2)) -> 4f(6) (4F(J)) 5d (E(g)) transitions of Eu(2+). The fluorescence measured at 300 K on a sample doped with 0.5 wt% of Eu(2)O(3) exhibited a broad band centered at 17 350 cm(-1), which is attributed to the 4f(6)5d -> 4f(7) transition of Eu(2+), whereas the additional peaks are due to the (5)D(0) -> (7)F(J) (J = 1, 2, 4) transitions of Eu(3+). From magnetization and XANES data it was possible to evaluate the fractions of Eu(2+) and Eu(3+) for the sample doped with 0.5 and 5.0 wt% of Eu(2)O(3), the values of which were approximately 30 and 70%, respectively.

The Determination of Total Hydrogen, Carbon, Nitrogen and Sulfur in Silicates, Silicate Rocks, Soils and Sediments

Determinations of the volatile elements carbon, hydrogen, sulfur and nitrogen in many geological RM, performed with the LECO CHN and SC analysers, are presented. The method allowed the determination of S in concentrations from a few % m/m to 0.001% m/m or less, of C from % m/m to 0.01% m/m and of H from % m/m to 0.004% m/m. Accuracy was usually better than the XRF method (for S). All obtained values passed the Sutarno-Steger test, which establishes that vertical bar(mean(analysed) - mean(certified))vertical bar/ S(certified) < 2, for the cases with an appropriate number of determinations (n > 10 for each element). It was possible to perform routine determination of C, H and S with the instrumentation, coupled with the determination of major and minor elements in geological materials. Determination of nitrogen could also be performed on an exploratory basis, with improvements in the method dependent on the future availability of more reference materials with reliable composition of this element.

Structure and Calcium-Binding Activity of LipL32, the Major Surface Antigen of Pathogenic Leptospira sp.

Leptospixosis, a spirochaetal zoonotic disease caused by Leptospira, has been recognized as an important emerging infectious disease. LipL32 is the major exposed outer membrane protein found exclusively in pathogenic leptospires, where it accounts for up to 75% of the total outer membrane proteins. It is highly immunogenic, and recent studies have implicated LipL32 as an extracellular matrix binding protein, interacting with collagens, fibronectin, and laminin. In order to better understand the biological role and the structural requirements for the function of this important lipoprotein, we have determined the 2.25-angstrom-resolution structure of recombinant LipL32 protein corresponding to residues 21-272 of the wild-type protein (LipL32(21-272)). The LipL32(21-272) monomer is made of a jelly-roll fold core from which several peripheral secondary structures protrude. LipL32(21-272) is structurally similar to several other jelly-roll proteins, some of which bind calcium ions and extracellular matrix proteins. Indeed, spectroscopic data (circular dichroism, intrinsic tryptophan fluorescence, and extrinsic 1-amino-2-naphthol-4-sulfonic acid fluorescence) confirmed the calcium-binding properties of LipL32(21-272). Ca(2+) binding resulted in a significant increase in the thermal stability of the protein, and binding was specific for Ca(2+) as no structural or stability perturbations were observed for Mg(2+), Zn(2+), or Cu(2+). Careful examination of the crystal lographic structure suggests the locations of putative regions that could mediate Ca(2+) binding as well as binding to other interacting host proteins, such as collagens, fibronectin, and lamixidn. (C) 2009 Elsevier Ltd. All rights reserved.

Tryptophan photooxidation promoted by new hybrid materials prepared by condensation of naphthalene imides with silicate by the sol-gel process

Three novel hybrid organic/inorganic materials were synthesized from 4-substituted (NO(2), Br, H) 1,8-naphthalene imide-N-propyltriethoxysilane by the sol-gel process. These materials were obtained as a xerogel and partially characterized. The ability to photosensitize the oxidation and degradation of tryptophan indole ring by these materials was studied through photophysical and photochemical techniques. Although the derivatives containing Br and NO(2) as substituent do not cause efficient tryptophan photodamage, the hybrid material obtained from 1,8-naphthalic anhydride is very efficient to promote tryptophan photooxidation. By using laser flash photolysis it was possible to verify the presence of naphthalene imide transient radical species. The presence of oxygen causes an increase of the yield of radical formation. These results suggest that the mechanism of photodegradation of tryptophan occurs by type I, i.e. the transient radical (TrpH(center dot+)) formed by the direct reaction of the triplet state of the naphthalene imide moiety with tryptophan. Thus a inorganic-organic hybrid material that can be used to promote the oxidation of biomolecules was obtained. (C) 2009 Elsevier B.V. All rights reserved.

Ixolaris, a tissue factor inhibitor, blocks primary tumor growth and angiogenesis in a glioblastoma model

Background: The expression levels of the clotting initiator protein Tissue Factor (TF) correlate with vessel density and the histological malignancy grade of glioma patients. Increased procoagulant tonus in high grade tumors (glioblastomas) also indicates a potential role for TF in progression of this disease, and suggests that anticoagulants could be used as adjuvants for its treatment. Objectives: We hypothesized that blocking of TF activity with the tick anticoagulant Ixolaris might interfere with glioblastoma progression. Methods and results: TF was identified in U87-MG cells by flow-cytometric and functional assays (extrinsic tenase). In addition, flow-cytometric analysis demonstrated the exposure of phosphatidylserine in the surface of U87-MG cells, which supported the assembly of intrinsic tenase (FIXa/FVIIIa/FX) and prothrombinase (FVa/FXa/prothrombin) complexes, accounting for the production of FXa and thrombin, respectively. Ixolaris effectively blocked the in vitro TF-dependent procoagulant activity of the U87-MG human glioblastoma cell line and attenuated multimolecular coagulation complexes assembly. Notably, Ixolaris inhibited the in vivo tumorigenic potential of U87-MG cells in nude mice, without observable bleeding. This inhibitory effect of Ixolaris on tumor growth was associated with downregulation of VEGF and reduced tumor vascularization. Conclusion: Our results suggest that Ixolaris might be a promising agent for anti-tumor therapy in humans.

The effect of calcium salts on the viscosity and adsorption behavior of xanthan

The effect of CaCl(2), Ca(NO(3))(2), CaSO(4), CaCO(3) and Ca(3)(PO(4))(2) on the flow behavior of xanthan gum solutions was investigated. Regardless the concentration and type of calcium salt used, xanthan solutions presented pseudoplastic behavior. The soluble salts (CaCl(2) and Ca(NO(3))(2)) induced the disordered state in the xanthan chains at concentration of 1.0 g/L or 10 g/L, decreasing the flow consistency index (K) values. At 100 g/L soluble salts K values were similar to those found for pure xanthan solutions, whereas at the same concentration of insoluble particles the K values increased 20%. The adsorption of xanthan gum onto Si/SiO(2) surfaces in the presence of calcium salts was investigated by ellipsometry and atomic force microscopy (AFM). The adsorbed layer of xanthan onto Si/SiO(2) consisted of two regions: (i) a thin acid resistant sublayer, where xanthan chains were like highly entangled fibers and (ii) a thick upperlayer, whose morphology was calcium salt dependent. (C) 2010 Elsevier Ltd. All rights reserved.

Calcium chemistry of Blue Lake, Mt Gambier, Australia, and relevance to remarkable seasonal colour changes

Calcium speciation and other water quality variables in the Blue Lake, Mt Gambier, Australia, were monitored between August 1999 and August 2000 in order to test previously proposed mechanisms for the seasonal colour changes of this lake. The concentration of calcite was found to be highest in winter when the lake appears grey, and lowest in summer when the lake appears blue. A potential component of the colour change mechanism is therefore identified in which the lake is grey in winter because of non-selective scattering of light by calcite particles, and blue in summer because of the absence of absorbing or scattering impurities.

Energy, protein, calcium, vitamin D and fibre intakes from meals in residential care establishments in Australia

Residents from high level (nursing homes) and low-level care facilities (hostel) being served the three common diet texture modifications (full diet, soft-minced diet and pureed diet) were assessed. Individual plate waste was estimated at three meals on one day. Fifty-six males and 156 females, mean age 82.9+/-9.5 (SD) years, of which 139 lived in nursing homes (NH) and 76 in hostels (H) were included. Mean total energy served from meals was 5.3 MJ/day, 5.1 to 5.6 MJ/day, 95% confidence intervals (CI), in NH which was less than in H, 5.9 MJ/day (CI 5.6 to 6.2 MJ/day) (P=0.007). Protein and calcium intakes were lower in NH, 44.5g (CI 41.5 to 47.5g), 359.0mg (CI 333.2 to 384.8mg), versus 50.5g (CI 46.6 to 54.3g), 480.5mg (CI 444.3 to 516.7mg) in H (P=0.017, P<0.001 respectively). There was no difference in nutrient/energy ratios, except for protein/energy, which was higher in NH 11.7 (CI 11.3 to 12.2) than in H 9.8 (CI 9.4 to 10.3) (P<0.001). Ability to self-feed had no significant effect on nutrient intakes in NH. The self fed group (N=63) had the following nutrient intakes: energy 4.0 MJ (CI 3.6 to 4.3 MJ), protein 44.6g (CI 40.3 to 48.9g), calcium 356.9mg (CI 316.3 to 397.4mg), fibre 14.9g (CI 13.2 to 16.5g). The assisted group (N=64) had the following nutrient intakes: energy 3.9MJ (CI 3.6 to 4.2MJ), protein 46.0g (CI 40.7 to 49.6), calcium 361.9mg (CI 327.8 to 396.1mg), fibre 14.9g (CI 13.2 to 16.1g). Of NH classified as eating impaired, 36% received no assistance with feeding and had lower intakes of protein 37.8g (CI 33.0 to 42.1g) compared to those receiving some assistance 46.1g (CI 41.3 to 50.9g) (P=0.026). Reduced energy intake accounted for the differences in nutrient intakes between nursing homes and hostels, except for protein. Strategies to effectively monitor nutrient intakes and to identify those with eating impairment are required in order to ensure adequate nutrition of residents in nursing homes and hostels.

Synthesis and structure of 1,3,5-tris(diorganohydroxysilyl)benzenes. Novel building blocks in supramolecular silanol chemistry

The 1,3,5-tris(diorganohydroxysilyl)benzenes 1,3,5-(HOR₂Si)₃C₆H₃ (TMSB, R = Me; TPSB, R = Ph) have been prepared and fully characterized by X-ray crystallography. The crystal structure of TMSB features pairwise connected layers, in which the molecules are involved in interlayer hydrogen bonding. The supramolecular hydrogen bond motif may be described as a 12-membered ring that adopts a chair conformation. TPSB forms an equimolar inclusion complex with water, which is associated via hydrogen bonding and apparently fills a void in the crystal packing. In this case, the supramolecular hydrogen bond motif may be described as an eight-membered ring. Two of the water molecules are also associated, giving rise to a water dimer entrapped in the silanol matrix. Besides the hydrogen bonds, the crystal structure of the TPSB·H₂O complex reveals intra- and intermolecular C-H··· π stacking of most of the phenyl groups. Electrospray mass spectrometry shows that TPSB undergoes supramolecular complex formation with a variety of N-donors such as 4-(dimethylamino)pyridine, N,N,N',N'-tetramethylethylenediamine, imidazole, 2-(dimethylamino)pyridine, and 2,2'-dipyridylamine.

Download the full text: PDF | HTML

Calcium- and vitamin D3 - fortified milk reduces bone loss at clinically relevant skeletal sites on llder men: a 2-year randomised controlled trial

In this 2-year randomized controlled study of 167 men >50 years of age, supplementation with calcium-vitamin D3-fortified milk providing an additional 1000 mg of calcium and 800 IU of vitamin D3 per day was effective for suppressing PTH and stopping or slowing bone loss at several clinically important skeletal sites at risk for fracture.

Introduction: Low dietary calcium and inadequate vitamin D stores have long been implicated in age-related bone loss and osteoporosis. The aim of this study was to assess the effects of calcium and vitamin D3 fortified milk on BMD in community living men >50 years of age.

Materials and Methods: This was a 2-year randomized controlled study in which 167 men (mean age ± SD, 61.9 ± 7.7 years) were assigned to receive either 400 ml/day of reduced fat (1%) ultra-high temperature (UHT) milk containing 1000 mg of calcium plus 800 IU of vitamin D3 or to a control group receiving no additional milk. Primary endpoints were changes in BMD, serum 25(OH)D, and PTH.

Results: One hundred forty-nine men completed the study. Baseline characteristics between the groups were not different; mean dietary calcium and serum 25(OH)D levels were 941 ± 387 mg/day and 77 ± 23 nM, respectively. After 2 years, the mean percent change in BMD was 0.9-1.6% less in the milk supplementation compared with control group at the femoral neck, total hip, and ultradistal radius (range, p < 0.08 to p < 0.001 after adjusting for covariates). There was a greater increase in lumbar spine BMD in the milk supplementation group after 12 and 18 months (0.8-1.0%, p ≤ 0.05), but the between-group difference was not significant after 2 years (0.7%; 95% CI, −0.3, 1.7). Serum 25(OH)D increased and PTH decreased in the milk supplementation relative to control group after the first year (31% and −18%, respectively; both p < 0.001), and these differences remained after 2 years. Body weight remained unchanged in both groups at the completion of the study.

Conclusions: Supplementing the diet of men >50 years of age with reduced-fat calcium- and vitamin D3-enriched milk may represent a simple, nutritionally sound and cost-effective strategy to reduce age-related bone loss at several skeletal sites at risk for fracture in the elderly.

Long-term effects of calcium-vitamin-D3-fortified milk on bone geometry and strength in older men

The long-term effects of calcium and vitamin D supplementation on bone material and structural properties in older men are not known. The aim of this study was to examine the effects of high calcium (1000 mg/day)- and vitamin-D3 (800 IU/day)-fortified milk on cortical and trabecular volumetric BMD (vBMD) and bone geometry at the axial and appendicular skeleton in men aged over 50 years. One hundred and eleven men who were part of a larger 2-year randomized controlled trial had QCT scans of the mid-femur and lumbar spine (L1–L3) to assess vBMD, bone geometry and indices of bone strength [polar moment of inertia (Ipolar)]. After 2 years, there were no significant differences between the milk supplementation and control group for the change in any mid-femur or L1–L3 bone parameters for all men aged over 50 years. However, the mid-femur skeletal responses to the fortified milk varied according to age, with a split of ≤62 versus >62 years being the most significant for discriminating the changes between the two groups. Subsequent analysis revealed that, in the older men (>62 years), the expansion in mid-femur medullary area was 2.8% (P < 0.01) less in the milk supplementation compared to control group, which helped to preserve cortical area in the milk supplementation group (between group difference 1.1%, P < 0.01). Similarly, for mid-femur cortical vBMD and Ipolar, the net loss was 2.3 and 2.8% less in the milk supplementation compared to control group (P < 0.01 and <0.001, respectively). In conclusion, calcium–vitamin-D3-fortified milk may represent an effective strategy to maintain bone strength by preventing endocortical bone loss and slowing the loss in cortical vBMD in elderly men.