Simulated Patient as Co-facilitators: Benefits and Challenges of the Interprofessional Team OSCE (Submission #9350).

Hypothesis: The quality of care for chronic patients depends on the collaborative skills of the healthcare providers.1,2 The literature lacks reports of the use of simulation to teach collaborative skills in non-acute care settings. We posit that simulation offers benefits for supporting the development of collaborative practice in non-acute settings. We explored the benefits and challenges of using an Interprofessional Team - Objective Structured Clinical Examination (IT-OSCE) as a formative assessment tool. IT-OSCE is an intervention which involves an interprofessional team of trainees interacting with a simulated patient (SP) enabling them to practice collaborative skills in non-acute care settings.5 A simulated patient are people trained to portray patients in a simulated scenario for educational purposes.6,7 Since interprofessional education (IPE) ultimately aims to provide collaborative patient-centered care.8,9 We sought to promote patient-centeredness in the learning process. Methods: The IT-OSCE was conducted with four trios of students from different professions. The debriefing was co-facilitated by the SP with a faculty. The participants were final-year students in nursing, physiotherapy and medicine. Our research question focused on the introduction of co-facilitated (SP and faculty) debriefing after an IT-OSCE: 1) What are the benefits and challenges of involving the SP during the debriefing? and 2) To evaluate the IT-OSCE, an exploratory case study was used to provide fine grained data 10, 11. Three focus groups were conducted - two with students (n=6; n=5), one with SPs (n=3) and one with faculty (n=4). Audiotapes were transcribed for thematic analysis performed by three researchers, who found a consensus on the final set of themes. Results: The thematic analysis showed little differentiation between SPs, student and faculty perspectives. The analysis of transcripts revealed more particularly, that the SP's co-facilitation during the debriefing of an IT-OSCE proved to be feasible. It was appreciated by all the participants and appeared to value and to promote patient-centeredness in the learning process. The main challenge consisted in SPs feedback, more particularly in how they could report accurate observations to a students' group rather than individual students. Conclusion: In conclusion, SP methodology using an IT-OSCE seems to be a useful and promising way to train collaborative skills, aligning IPE, simulation-based team training in a non-acute care setting and patient-centeredness. We acknowledge the limitations of the study, especially the small sample and consider the exploration of SP-based IPE in non-acute care settings as strength. Future studies could consider the preparation of SPs and faculty as co-facilitators. References: 1. Borrill CS, Carletta J, Carter AJ, et al. The effectiveness of health care teams in the National Health Service. Aston centre for Health Service Organisational Research. 2001. 2. Reeves S, Lewin S, Espin S, Zwarenstein M. Interprofessional teamwork for health and social care. Oxford: Wiley-Blackwell; 2010. 3. Issenberg S, McGaghie WC, Petrusa ER, Gordon DL, Scalese RJ. Features and uses of high-fidelity medical simulations that lead to effective learning - a BEME systematic review. Medical Teacher. 2005;27(1):10-28. 4. McGaghie W, Petrusa ER, Gordon DL, Scalese RJ. A critical review of simulation-based medical education research: 2003-2009. Medical Education. 2010;44(1):50-63. 5. Simmons B, Egan-Lee E, Wagner SJ, Esdaile M, Baker L, Reeves S. Assessment of interprofessional learning: the design of an interprofessional objective structured clinical examination (iOSCE) approach. Journal of Interprofessional Care. 2011;25(1):73-74. 6. Nestel D, Layat Burn C, Pritchard SA, Glastonbury R, Tabak D. The use of simulated patients in medical education: Guide Supplement 42.1 - Viewpoint. Medical teacher. 2011;33(12):1027-1029. Disclosures: None (C) 2014 by Lippincott Williams & Wilkins, Inc.

"Tu seras Psychologue, ma fille". La transmission intergénérationnelle du choix professionnel : Une co-construction entre parents et enfants.

The aim of the study is to understand how the family influences the choice of becoming a psychologist and how an occupational choice is repeated in the family, via intergenerational transmission. We interviewed seven female students in a Master of Science in Psychology : first, they filled in a genosociogramm including data about occupations of their ancestors on about four generations ; then, they took part into a semi-structured qualitative enquiry. Our results have shown that a little bit less than half of the subjects have a parent who have social or care jobs, but more than half if we add the grand-parents. In a conscious level, subjects tend to deny any kind of family influence, in the majority ; afterwards, they discover influences they didn't notice. Secondly, the content analysis reveals five categories of family influence : the educational path (doubts, choices), the choice of psychology via the development of self-efficacy (interest, personality and soft skills), the exploration of occupations and activities during childhood and adulthood (leisure activities, professional world, suggestions, advice, education), the transmission of values (immaterial and material) and the family relationships during childhood and teenage years (relationship issues and difficulties, confidences and secrets, relationships and role in the brotherhood and/or sisterhood). The importance for the career counselor to investigate the relational context of his/her consultant is discussed, as much as the need for him to think about his own motivations to help others, linked with his family background.

Randomized, crossover, double-blind, placebo-controlled trial to assess the lipid lowering effect of co-formulated TDF/FTC

Abstract INTRODUCTION: Previous studies have described improvements on lipid parameters when switching from other antiretroviral drugs to tenofovir (TDF) and impairments in lipid profile when discontinuing TDF. [1-3] It is unknown, however, if TDF has an intrinsic lipid-lowering effect or such findings are due to the addition or removal of other offending agents or other reasons. MATERIALS AND METHODS: RESULTS: 46 subjects with a median age of 43 (40-48) years were enrolled in the study: 70% were male, 56% received DRV/r and 44% LPV/r. One subject withdrew the study voluntarily at week 4 and another one interrupted due to diarrhoea at week 24. Treatment with TDF/FTC decreased total, LDL and HDL-cholesterol from 235.9 to 204.9 (p<0.001), 154.7 to 127.6 (p<0.001) and 50.3 to 44.5 mg/dL (p<0.001), respectively. In comparison, total, LDL and HDL-cholesterol levels remained stable during placebo exposure. Week 12 total cholesterol (p<0.001), LDL-cholesterol (p<0.001) and HDL-cholesterol (p=0.011) levels were significantly lower in TDF/FTC versus placebo. Treatment with TDF/FTC reduced the fraction of subjects with abnormal fasting total-cholesterol (≥200 mg/dL) from 86.7% to 56.8% (p=0.001) and LDL-cholesterol (≥130 mg/dL) from 87.8% to 43.9% (p<0.001), which was not observed with placebo. There were no virological failures, and CD4 and triglyceride levels remained stable regardless of exposure. CONCLUSION: Coformulated TDF/FTC has an intrinsic lipid-lowering effect, likely attributable to TDF.

SMRT-mediated co-shuttling enables export of class IIa HDACs independent of their CaM kinase phosphorylation sites

The Class IIa histone deacetylases (HDAC)4 and HDAC5 play a role in neuronal survival and behavioral adaptation in the CNS. Phosphorylation at 2/3 N-terminal sites promote their nuclear export. We investigated whether non-canonical signaling routes to Class IIa HDAC export exist because of their association with the co-repressor Silencing Mediator Of Retinoic And Thyroid Hormone Receptors (SMRT). We found that, while HDAC5 and HDAC4 mutants lacking their N-terminal phosphorylation sites (HDAC4(MUT), HDAC5(MUT)) are constitutively nuclear, co-expression with SMRT renders them exportable by signals that trigger SMRT export, such as synaptic activity, HDAC inhibition, and Brain Derived Neurotrophic Factor (BDNF) signaling. We found that SMRT's repression domain 3 (RD3) is critical for co-shuttling of HDAC5(MUT), consistent with the role for this domain in Class IIa HDAC association. In the context of BDNF signaling, we found that HDAC5(WT), which was more cytoplasmic than HDAC5(MUT), accumulated in the nucleus after BDNF treatment. However, co-expression of SMRT blocked BDNF-induced HDAC5(WT) import in a RD3-dependent manner. In effect, SMRT-mediated HDAC5(WT) export was opposing the BDNF-induced HDAC5 nuclear accumulation observed in SMRT's absence. Thus, SMRT's presence may render Class IIa HDACs exportable by a wider range of signals than those which simply

Reações de Etanol com CO/H2 na Presença do Sistema Catalítico Ru(acac)3/I-

The hydrocarbonylation reaction of ethanol with a CO/H2 mixture assisted by Ru(acac)3/iodide was investigated. Bronsted and Lewis acids and iodides salt were used as homogeneous promoters. The etherification reaction was the main reaction under typical acidic conditions of the catalytic system. When a hydrocarbon solvent (toluene) was added to the initial reaction, the alcohol conversion and the carbonylation products were increased. The catalytic activity of the Bronsted acids (conv. EtOH = 71-92%) was higher than that of the Lewis acids promoters (conv. EtOH = 65-85%). The salt present the lower catalytic activity among the promoters used. The long time reaction carried out with ethanol showed an increase of the product selectivity of the homologation and carbonylation reactions while the etherification reaction selectivity decreased. The recycled ether led to 60-65% ethanol conversion to C5 and C6 products. The main catalytic species are H+[Ru(CO)3I3]-, [HRu3(CO)11]- and [HRu(CO)4]-. The first one is active in the carbonylation and homologation reactions of alcohols while the two others take part only in the homologation reaction.

Recuperação de metais de catalisadores usados de hidrotratamento (NiMo E CoMo/AL2O3)

This work presents a detailed study of the leaching behavior of deactivated hydrotreating catalysts (CoMo, NiMo/Al2O3) in presence of oxalate and NH4+ ions in various media. The yield of metals recovery may be optimized by adjusting several experimental parameters (time, temperature, etc). Leaching is limited by physical factors (diffusional effects caused by coke) and by the existence of silicate/spinel-like species which are poorly soluble in leaching solutions. Coke may be eliminated by an oxidation step at temperatures between 300-400ºC. Above 400ºC, solubilization of Ni and Co is drastically reduced. 50-90% wt of sulphate species and 15-30% wt of phosphate ions are solubilized during leaching. Silicon (as SiO2) is not solubilized. The best Ni-Co-Mo recoveries are in the 70-90% wt range; Fe recovery may be quantitative, whereas Al leaching may be lower than 5% wt.

Desenvolvimento e caracterização de recobrimentos de Ni-Co e de seus óxidos mistos para a produção de oxigênio por eletrólise alcalina da água

This paper describes the development and characterisation of Ni-Co coatings to be used as anodes in water electrolysis. Chemical oxidation of the surface was performed through thermal treatment at 400ºC for 10 h. The resulting surfaces were analysed by X-ray diffraction, EDX, SEM, cyclic voltammetry and constant current electrolysis. The electrochemical oxidation occurring on bare surfaces during electrolysis promotes the formation of thick oxide layers resulting in loss of activity. In oxidised surfaces the chemical Ni-Co oxide grown during the thermal treatment prevents further oxidation thus retaining their activity towards oxygen evolution. An optimum condition for the growth of mixed oxide with high activity was found for the bath containing 50 g L-1 CoSO4.

Determinação de traços de Co e Co2 "em linha" por cromatografia em fase gasosa

The present work describes a rapid and sensitive method for the determination of carbon monoxide and carbon dioxide at low concentration levels, on line, in ethylene and hydrogen lines. These gases were separated in a column filled with Porapak Q, converted to methane and quantified by a flame ionization detector. Some modifications were made in the injection system and in the lines of the carrier gas. The detection limits of 2,6 ppbV and 4,85 ppbV for CO and CO2, respectively, were reached after modifications.

Fischer-Tropsch Slurry Bubble Column Reactor Modeling

The literature part of the work reviews overall Fischer-Tropsch process, Fischer-Tropsch reactors and catalysts. Fundamentals of Fischer-Tropsch modeling are also presented. The emphasis is on the reactor unit. Comparison of the reactors and the catalysts is carried out to choose the suitable reactor setup for the modeling work. The effects of the operation conditions are also investigated. Slurry bubble column reactor model operating with cobalt catalyst is developed by taking into account the mass transfer of the reacting components (CO and H2) and the consumption of the reactants in the liquid phase. The effect of hydrostatic pressure and the change in total mole flow rate in gas phase are taken into account in calculation of the solubilities. The hydrodynamics, reaction kinetics and product composition are determined according to literature. The cooling system and furthermore the required heat transfer area and number of cooling tubes are also determined. The model is implemented in Matlab software. Commercial scale reactor setup is modeled and the behavior of the model is investigated. The possible inaccuraries are evaluated and the suggestions for the future work are presented. The model is also integrated to Aspen Plus process simulation software, which enables the usage of the model in more extensive Fischer-Tropsch process simulations. Commercial scale reactor of diameter of 7 m and height of 30 m was modeled. The capacity of the reactor was calculated to be about 9 800 barrels/day with CO conversion of 75 %. The behavior of the model was realistic and results were in the right range. The highest uncertainty to model was estimated to be caused by the determination of the kinetic rate.

A Co-Processor Approach for Efficient Java Execution in Embedded Systems

This thesis deals with a hardware accelerated Java virtual machine, named REALJava. The REALJava virtual machine is targeted for resource constrained embedded systems. The goal is to attain increased computational performance with reduced power consumption. While these objectives are often seen as trade-offs, in this context both of them can be attained simultaneously by using dedicated hardware. The target level of the computational performance of the REALJava virtual machine is initially set to be as fast as the currently available full custom ASIC Java processors. As a secondary goal all of the components of the virtual machine are designed so that the resulting system can be scaled to support multiple co-processor cores. The virtual machine is designed using the hardware/software co-design paradigm. The partitioning between the two domains is flexible, allowing customizations to the resulting system, for instance the floating point support can be omitted from the hardware in order to decrease the size of the co-processor core. The communication between the hardware and the software domains is encapsulated into modules. This allows the REALJava virtual machine to be easily integrated into any system, simply by redesigning the communication modules. Besides the virtual machine and the related co-processor architecture, several performance enhancing techniques are presented. These include techniques related to instruction folding, stack handling, method invocation, constant loading and control in time domain. The REALJava virtual machine is prototyped using three different FPGA platforms. The original pipeline structure is modified to suit the FPGA environment. The performance of the resulting Java virtual machine is evaluated against existing Java solutions in the embedded systems field. The results show that the goals are attained, both in terms of computational performance and power consumption. Especially the computational performance is evaluated thoroughly, and the results show that the REALJava is more than twice as fast as the fastest full custom ASIC Java processor. In addition to standard Java virtual machine benchmarks, several new Java applications are designed to both verify the results and broaden the spectrum of the tests.

Reações de Cp'(CO)2MnPPH2H com CH3COCl e CH3S(O)2Cl em THF/trietilamina: evidências da primeira estabilização por complexação de um fósforo-homólogo das sulfonamidas

Cp'Mn(CO)3 (Cp'=h5-C5H4-CH 3) reacts with P(C6H5)2H in THF to give Cp'(CO)2MnPPh2H (Ph = Phenyl) (1), by substitution of one CO ligand. The reaction of 1 with CH3COCl and CH3S(O)2Cl in the presence of triethylamine occurs under electrophilic substitution on the diphenylphosphan ligand to yield the acetyl- and sulfonylphosphane complexes of manganese(I) Cp'(CO)2MnPPh2COCH3 (2) and Cp'(CO)2MnPPh2S(O)2 CH3 (3). The complex stabilisation of these molecules, wich are hitherto unknown in the free state, is only accomplished by blocking the free electron pair on phosphorus by coordination. The new complexes 1, 2 and 3 were analysed by IR, ¹H-NMR and 31P-MNR spectroscopy and their similar structures are discusssed.

Reduction and Analysis Methods of Indigo

Throughout history indigo was derived from various plants for example Dyer’s Woad (Isatis tinctoria L.) in Europe. In the 19th century were the synthetic dyes developed and nowadays indigo is mainly synthesized from by-products of fossil fuels. Indigo is a so-called vat dye, which means that it needs to be reduced to its water soluble leucoform before dyeing. Nowadays, most of the industrial reduction is performed chemically by sodium dithionite. However, this is considered environmentally unfavourable because of waste waters contaminating degradation products. Therefore there has been interest to find new possibilities to reduce indigo. Possible alternatives for the application of dithionite as the reducing agent are biologically induced reduction and electrochemical reduction. Glucose and other reducing sugars have recently been suggested as possible environmentally friendly alternatives as reducing agents for sulphur dyes and there have also been interest in using glucose to reduce indigo. In spite of the development of several types of processes, very little is known about the mechanism and kinetics associated with the reduction of indigo. This study aims at investigating the reduction and electrochemical analysis methods of indigo and give insight on the reduction mechanism of indigo. Anthraquinone as well as it’s derivative 1,8-dihydroxyanthraquinone were discovered to act as catalysts for the glucose induced reduction of indigo. Anthraquinone introduces a strong catalytic effect which is explained by invoking a molecular “wedge effect” during co-intercalation of Na+ and anthraquinone into the layered indigo crystal. The study includes also research on the extraction of plant-derived indigo from woad and the examination of the effect of this method to the yield and purity of indigo. The purity has been conventionally studied spectrophotometrically and a new hydrodynamic electrode system is introduced in this study. A vibrating probe is used in following electrochemically the leuco-indigo formation with glucose as a reducing agent.