A comparison of the spatial dependence of body mass index among adults and children in a Swiss general population.

BACKGROUND: Body mass index (BMI) may cluster in space among adults and be spatially dependent. Whether BMI clusters among children and how age-specific BMI clusters are related remains unknown. We aimed to identify and compare the spatial dependence of BMI in adults and children in a Swiss general population, taking into account the area's income level. METHODS: Geo-referenced data from the Bus Santé study (adults, n=6663) and Geneva School Health Service (children, n=3601) were used. We implemented global (Moran's I) and local (local indicators of spatial association (LISA)) indices of spatial autocorrelation to investigate the spatial dependence of BMI in adults (35-74 years) and children (6-7 years). Weight and height were measured using standardized procedures. Five spatial autocorrelation classes (LISA clusters) were defined including the high-high BMI class (high BMI participant's BMI value correlated with high BMI-neighbors' mean BMI values). The spatial distributions of clusters were compared between adults and children with and without adjustment for area's income level. RESULTS: In both adults and children, BMI was clearly not distributed at random across the State of Geneva. Both adults' and children's BMIs were associated with the mean BMI of their neighborhood. We found that the clusters of higher BMI in adults and children are located in close, yet different, areas of the state. Significant clusters of high versus low BMIs were clearly identified in both adults and children. Area's income level was associated with children's BMI clusters. CONCLUSIONS: BMI clusters show a specific spatial dependence in adults and children from the general population. Using a fine-scale spatial analytic approach, we identified life course-specific clusters that could guide tailored interventions.

Assessment of statistical iterative reconstructions to optimize CT examination protocols for children and young adults

La tomodensitométrie (CT) est une technique d'imagerie dont l'intérêt n'a cessé de croître depuis son apparition dans le début des années 70. Dans le domaine médical, son utilisation est incontournable à tel point que ce système d'imagerie pourrait être amené à devenir victime de son succès si son impact au niveau de l'exposition de la population ne fait pas l'objet d'une attention particulière. Bien évidemment, l'augmentation du nombre d'examens CT a permis d'améliorer la prise en charge des patients ou a rendu certaines procédures moins invasives. Toutefois, pour assurer que le compromis risque - bénéfice soit toujours en faveur du patient, il est nécessaire d'éviter de délivrer des doses non utiles au diagnostic.¦Si cette action est importante chez l'adulte elle doit être une priorité lorsque les examens se font chez l'enfant, en particulier lorsque l'on suit des pathologies qui nécessitent plusieurs examens CT au cours de la vie du patient. En effet, les enfants et jeunes adultes sont plus radiosensibles. De plus, leur espérance de vie étant supérieure à celle de l'adulte, ils présentent un risque accru de développer un cancer radio-induit dont la phase de latence peut être supérieure à vingt ans. Partant du principe que chaque examen radiologique est justifié, il devient dès lors nécessaire d'optimiser les protocoles d'acquisitions pour s'assurer que le patient ne soit pas irradié inutilement. L'avancée technologique au niveau du CT est très rapide et depuis 2009, de nouvelles techniques de reconstructions d'images, dites itératives, ont été introduites afin de réduire la dose et améliorer la qualité d'image.¦Le présent travail a pour objectif de déterminer le potentiel des reconstructions itératives statistiques pour réduire au minimum les doses délivrées lors d'examens CT chez l'enfant et le jeune adulte tout en conservant une qualité d'image permettant le diagnostic, ceci afin de proposer des protocoles optimisés.¦L'optimisation d'un protocole d'examen CT nécessite de pouvoir évaluer la dose délivrée et la qualité d'image utile au diagnostic. Alors que la dose est estimée au moyen d'indices CT (CTDIV0| et DLP), ce travail a la particularité d'utiliser deux approches radicalement différentes pour évaluer la qualité d'image. La première approche dite « physique », se base sur le calcul de métriques physiques (SD, MTF, NPS, etc.) mesurées dans des conditions bien définies, le plus souvent sur fantômes. Bien que cette démarche soit limitée car elle n'intègre pas la perception des radiologues, elle permet de caractériser de manière rapide et simple certaines propriétés d'une image. La seconde approche, dite « clinique », est basée sur l'évaluation de structures anatomiques (critères diagnostiques) présentes sur les images de patients. Des radiologues, impliqués dans l'étape d'évaluation, doivent qualifier la qualité des structures d'un point de vue diagnostique en utilisant une échelle de notation simple. Cette approche, lourde à mettre en place, a l'avantage d'être proche du travail du radiologue et peut être considérée comme méthode de référence.¦Parmi les principaux résultats de ce travail, il a été montré que les algorithmes itératifs statistiques étudiés en clinique (ASIR?, VEO?) ont un important potentiel pour réduire la dose au CT (jusqu'à-90%). Cependant, par leur fonctionnement, ils modifient l'apparence de l'image en entraînant un changement de texture qui pourrait affecter la qualité du diagnostic. En comparant les résultats fournis par les approches « clinique » et « physique », il a été montré que ce changement de texture se traduit par une modification du spectre fréquentiel du bruit dont l'analyse permet d'anticiper ou d'éviter une perte diagnostique. Ce travail montre également que l'intégration de ces nouvelles techniques de reconstruction en clinique ne peut se faire de manière simple sur la base de protocoles utilisant des reconstructions classiques. Les conclusions de ce travail ainsi que les outils développés pourront également guider de futures études dans le domaine de la qualité d'image, comme par exemple, l'analyse de textures ou la modélisation d'observateurs pour le CT.¦-¦Computed tomography (CT) is an imaging technique in which interest has been growing since it first began to be used in the early 1970s. In the clinical environment, this imaging system has emerged as the gold standard modality because of its high sensitivity in producing accurate diagnostic images. However, even if a direct benefit to patient healthcare is attributed to CT, the dramatic increase of the number of CT examinations performed has raised concerns about the potential negative effects of ionizing radiation on the population. To insure a benefit - risk that works in favor of a patient, it is important to balance image quality and dose in order to avoid unnecessary patient exposure.¦If this balance is important for adults, it should be an absolute priority for children undergoing CT examinations, especially for patients suffering from diseases requiring several follow-up examinations over the patient's lifetime. Indeed, children and young adults are more sensitive to ionizing radiation and have an extended life span in comparison to adults. For this population, the risk of developing cancer, whose latency period exceeds 20 years, is significantly higher than for adults. Assuming that each patient examination is justified, it then becomes a priority to optimize CT acquisition protocols in order to minimize the delivered dose to the patient. Over the past few years, CT advances have been developing at a rapid pace. Since 2009, new iterative image reconstruction techniques, called statistical iterative reconstructions, have been introduced in order to decrease patient exposure and improve image quality.¦The goal of the present work was to determine the potential of statistical iterative reconstructions to reduce dose as much as possible without compromising image quality and maintain diagnosis of children and young adult examinations.¦The optimization step requires the evaluation of the delivered dose and image quality useful to perform diagnosis. While the dose is estimated using CT indices (CTDIV0| and DLP), the particularity of this research was to use two radically different approaches to evaluate image quality. The first approach, called the "physical approach", computed physical metrics (SD, MTF, NPS, etc.) measured on phantoms in well-known conditions. Although this technique has some limitations because it does not take radiologist perspective into account, it enables the physical characterization of image properties in a simple and timely way. The second approach, called the "clinical approach", was based on the evaluation of anatomical structures (diagnostic criteria) present on patient images. Radiologists, involved in the assessment step, were asked to score image quality of structures for diagnostic purposes using a simple rating scale. This approach is relatively complicated to implement and also time-consuming. Nevertheless, it has the advantage of being very close to the practice of radiologists and is considered as a reference method.¦Primarily, this work revealed that the statistical iterative reconstructions studied in clinic (ASIR? and VECO have a strong potential to reduce CT dose (up to -90%). However, by their mechanisms, they lead to a modification of the image appearance with a change in image texture which may then effect the quality of the diagnosis. By comparing the results of the "clinical" and "physical" approach, it was showed that a change in texture is related to a modification of the noise spectrum bandwidth. The NPS analysis makes possible to anticipate or avoid a decrease in image quality. This project demonstrated that integrating these new statistical iterative reconstruction techniques can be complex and cannot be made on the basis of protocols using conventional reconstructions. The conclusions of this work and the image quality tools developed will be able to guide future studies in the field of image quality as texture analysis or model observers dedicated to CT.

Building energy saving techniques and indoor air quality : a dilemma

In European countries and North America, people spend 80 to 90% of time inside buildings and thus breathe indoor air. In Switzerland, special attention has been devoted to the 16 stations of the national network of observation of atmospheric pollutants (NABEL). The results indicate a reduction in outdoor pollution over the last ten years. With such a decrease in pollution over these ten years the question becomes: how can we explain an increase of diseases? Indoor pollution can be the cause. Indoor contaminants that may create indoor air quality (IAQ) problems come from a variety of sources. These can include inadequate ventilation, temperature and humidity dysfunction, and volatile organic compounds (VOCs). The health effects from these contaminants are varied and can range from discomfort, irritation and respiratory diseases to cancer. Among such contaminants, environmental tobacco smoke (ETS) could be considered the most important in terms of both health effects and engineering controls of ventilation. To perform indoor pollution monitoring, several selected ETS tracers can be used including carbon monoxide (CO), carbon dioxide (CO2), respirable particles (RSP), condensate, nicotine, polycyclic aromatic hydrocarbons (PAHs), nitrosamines, etc. In this paper, some examples are presented of IAQ problems that have occurred following the renewal of buildings and energy saving concerns. Using industrial hygiene sampling techniques and focussing on selected priority pollutants used as tracers, various problems have been identified and solutions proposed. [Author]

How robust are global conservation priorities to climate change?

International conservation organisations have identified priority areas for biodiversity conservation. These global-scale prioritisations affect the distribution of funds for conservation interventions. As each organisation has a different focus, each prioritisation scheme is determined by different decision criteria and the resultant priority areas vary considerably. However, little is known about how the priority areas will respond to the impacts of climate change. In this paper, we examined the robustness of eight global-scale prioritisations to climate change under various climate predictions from seven global circulation models. We developed a novel metric of the climate stability for 803 ecoregions based on a recently introduced method to estimate the overlap of climate envelopes. The relationships between the decision criteria and the robustness of the global prioritisation schemes were statistically examined. We found that decision criteria related to level of endemism and landscape fragmentation were strongly correlated with areas predicted to be robust to a changing climate. Hence, policies that prioritise intact areas due to the likely cost efficiency, and assumptions related to the potential to mitigate the impacts of climate change, require further examination. Our findings will help determine where additional management is required to enable biodiversity to adapt to the impacts of climate change

Disseny i implementació d'un conjunt de perifèrics de comunicació per a la seva incorporació en nous dissenys hardware del grup de robòtica i visió per computador

El grupo de robòtica i Visió fabricó la tarjeta gráfica MAGCL para el tratamiento de imágenes en tiempo real, en la que se incluyó un conector IDC20 proveniente de parte del bus de datos, de la FPGA que contiene, destinado a futuras aplicaciones. Con este proyecto se quiere aprovechar este conector para la comunicación de la placa con un PC, y se desarrollarán los puertos de comunicación serie RS232 y USB, Universal Serial Bus.El objetivo de este proyecto es establecer la comunicación de la tarjeta gráfica con un PC a través de estos dos tipos de puerto. Una vez conseguida la comunicación, quedan una serie de librerías hardware que pueden ayudar en la realización de futuros proyectos. La placa posee una FPGA (field programable gate array) destinada al desarrollo, pero programando esas librerías sobre otros componentes, se pueden utilizar estos puertos de forma permanente o exclusiva

Assessment of particulate exposure and surface characteristics in association with urinary levels of 8-hydroxy-2'-deoxyguanosine, considered as marker of oxidative stress

Epidemiological studies have demonstrated that exposure to fine particles is associated to adverse health effects, including cancer, respiratory and cardiovascular diseases. However, mechanisms by which particles induce health effects remain unclear. According to one of the most investigated hypotheses, particles cause adverse effects through the production of reactive oxygen species (ROS), which are very hazardous compounds able to attack directly biological structures, including the DNA strand or the lipid bilayer of the cells. If the defense mechanisms, constituted of antioxidants, are not able to counter ROS, then these compounds will cause in the body a range of oxidation reactions called "oxidative stress". The aim of the present research project was to better understand mechanisms by which exposure to fine particles induces oxidative stress. The first point of this project was to check whether exposure to high levels of fine particles is directly linked to oxidative stress, and whether this oxidative stress is accompanied by the activation of the defense mechanisms (antioxidants). The second point was to study the role played by the particle surface characteristics in the oxidative stress process. For that purpose, a study was conducted in bus depots with the participation of 40 mechanics. First, occupational exposure to particles (PM4) and to other pollutants (NOx, O3) was measured over a two-day period. Then, urine samples of mechanics were collected in order to measure levels of 8-hydroxy-2'-deoxyguanosine (8OHdG) and antioxidants. 8OHdG is a molecule formed by the oxidation of DNA and allowing to assess the oxidative stress status of the mechanics. Finally, particles were collected on filters, and functional groups located on the particle surface were analyzed in the laboratory using a Knudsen flow reactor. This technique allows not only to quantify functional groups on the particle surface, but also to measure the reaction kinetics. Results obtained during the field campaign in bus depots showed that mechanics were exposed to rather low levels of PM4 (20-85 μg/m3) and of pollutants (NOx: 100-1000 ppb; O3: <15 ppb). However, despite this low exposure, urinary levels of the oxidative stress biomarker (8OHdG) increased significantly for non-smoking workers over a two-day period of shift. This oxidative stress was accompanied by an increase of antioxidants, indicating the activation of defense mechanisms. On the other hand, the analysis of functional groups on the particle surface showed important differences, depending on the workplace, the date and the activities of workers. The particle surface contained simultaneously antagonistic functional groups which did not undergo internal reactions (such as acids and bases), and was usually characterized by a high density of carbonyl functions and a low density of acidic sites. Reaction kinetics measured using the Knudsen flow reactor pointed out fast reactions of oxidizable groups and slow reactions of acidic sites. Several exposure parameters were significantly correlated with the increase of the oxidative stress status: the presence of acidic sites, carbonyl functions and oxidizable groups on the particle surface; reaction kinetics of functional groups on the particle surface; particulate iron and copper concentrations; and NOx concentration.

Complexité, médecine générale et réformes des systèmes de santé [Complexity, general practice and reforms of health systems].

The family doctor facing complexity must decide in situations of low certainty and low agreement. Complexity is in part subjective but can also be measured. Changes in the health systems aim to reduce health costs. They tend to give priority to simple situations and to neglect complexity. One role of an academic institute of family medicine is to present and promote the results of scientific research supporting the principles of family medicine, taking into account both the local context and health systems reforms. In Switzerland the new challenge is the introduction of managed care.

Treatment of hepatitis C in HCV mono-infected and in HIV-HCV co-infected patients: an open-labelled comparison study.

BACKGROUND/AIMS: Treatment of chronic HCV infection has become a priority in HIV+ patients, given the faster progression to end-stage liver disease. The primary endpoint of this study was to evaluate and compare antiviral efficacy of Peginterferon alpha 2a plus ribavirin in HIV-HCV co-infected and HCV mono-infected patients, and to examine whether 6 months of therapy would have the same efficacy in HIV patients with favourable genotypes 2 and 3 as in mono-infected patients, to minimise HCV-therapy-related toxicities. Secondary endpoints were to evaluate predictors of sustained virological response (SVR) and frequency of side-effects. METHODS: Patients with genotypes 1 and 4 were treated for 48 weeks with Pegasys 180 microg/week plus Copegus 1000-1200 mg/day according to body weight; patients with genotypes 2 and 3 for 24 weeks with Pegasys 180 microg/week plus Copegus 800 mg/day. RESULTS: 132 patients were enrolled in the study: 85 HCV mono-infected (38: genotypes 1 and 4; 47: genotypes 2 and 3), 47 HIV-HCV co-infected patients (23: genotypes 1 and 4; 24: genotypes 2 and 3). In an intention-to-treat analysis, SVR for genotypes 1 and 4 was observed in 58% of HCV mono-infected and in 13% of HIV-HCV co-infected patients (P = 0.001). For genotypes 2 and 3, SVR was observed in 70% of HCV mono-infected and in 67% of HIV-HCV co-infected patients (P = 0.973). Undetectable HCV-RNA at week 4 had a positive predictive value for SVR for mono-infected patients with genotypes 1 and 4 of 0.78 (95% CI: 0.54-0.93) and of 0.81 (95% CI: 0.64-0.92) for genotypes 2 and 3. For co-infected patients with genotypes 2 and 3, the positive predictive value of SVR of undetectable HCV-RNA at week 4 was 0.76 (95%CI, 0.50-0.93). Study not completed by 22 patients (36%): genotypes 1 and 4 and by 12 patients (17%): genotypes 2 and 3. CONCLUSION: Genotypes 2 or 3 predict the likelihood of SVR in HCV mono-infected and in HIV-HCV co-infected patients. A 6-month treatment with Peginterferon alpha 2a plus ribavirin has the same efficacy in HIV-HCV co-infected patients with genotypes 2 and 3 as in mono-infected patients. HCV-RNA negativity at 4 weeks has a positive predictive value for SVR. Aggressive treatment of adverse effects to avoid dose reduction, consent withdrawal or drop-out is crucial to increase the rate of SVR, especially when duration of treatment is 48 weeks. Sixty-one percent of HIV-HCV co-infected patients with genotypes 1 and 4 did not complete the study against 4% with genotypes 2 and 3.

Trajectòries d'èxit de joves immigrants a l'ensenyament superior i al món professional

L’educació dels immigrants és un tema prioritari a les agendes polítiques de molts països de la OCDE. En molts casos, els governs s’han preocupat especialment de la seva integració al món del treball però creix l’interès en els seus resultats al sistema educatiu i en la revisió de les polítiques adreçades a respondre a les seves necessitats educatives i formatives. La majoria d’aquests estudis es situen a l’esfera de l’educació infantil, primària, secundaria i formació professional, per això resulta pràcticament impossible trobar estudis que analitzin el baix percentatge d’accés d’estudiants immigrants extracomunitaris a la universitat (al voltant de 3,3% en el cas de Catalunya); que contribueixin a entendre els factors que configuren les trajectòries d’èxit escolar i d’integració laboral dels estudiants immigrants que accedeixen i completen els estudis universitaris; que puguin donar pautes per desenvolupar polítiques educatives que millorin els resultats d’aprenentatge dels estudiants immigrants; i que puguin servir com a mirall i incentiu per a altres persones immigrants i, perquè no, també del país. Aquest projecte ha estudiat el conjunt d’elements que condicionen l’accés dels joves immigrants als estudis universitaris, i a l’estatus laboral que els hauria de possibilitar la seva formació universitària. L’estudi ha consistit en una metaanàlisi dels documents existents sobre el tema i en la realització de 8 narratives biogràfiques; quatre de persones cursant diferents estudis a les universitats catalanes i quatre que ja s’han incorporat al món del professional. Aquestes narratives venen acompanyades de 8 vídeos que exploren noves maneres de visibilització d’aquesta població i es transformen en una pràctica d’autoria. Aquest material visual pot servir com a recurs educatiu, en la mida que pugui ser un mirall i un incentiu per a altres persones immigrants i del país. Finalment, presenta un seguit de recomanacions per als responsables de les polítiques i dels centres educatius.

Multifunctional ligands for application in Alzheimer’s Disease: molecular modelling and biological evaluation

Projecte de recerca elaborat a partir d’una estada a la University of British Columbia, Canadà, entre 2010 i 2012 La malaltia d'Alzheimer (MA) representa avui la forma més comuna de demència en la població envellida. Malgrat fa 100 anys que va ser descoberta, encara avui no existeix cap tractament preventiu i/o curatiu ni cap agent de diagnòstic que permeti valorar quantitativament l'evolució d'aquesta malaltia. L'objectiu en el que s'emmarca aquest treball és contribuir a aportar solucions al problema de la manca d'agents terapèutics i de diagnosi, unívocs i rigorosos, per a la MA. Des del camp de la química bioinorgànica és fàcil fixar-se en l'excessiva concentració d'ions Zn(II) i Cu(II) en els cervells de malalts de MA, plantejar-se la seva utilització com a dianes terapèutica i, en conseqüència, cercar agents quelants que evitin la formació de plaques senils o contribueixin a la seva dissolució. Si bé aquest va ser el punt de partida d’aquest projecte, els múltiples factors implicats en la patogènesi de la MA fan que el clàssic paradigma d’ ¨una molècula, una diana¨ limiti la capacitat de la molècula de combatre aquesta malaltia tan complexa. Per tant, un esforç considerable s’ha dedicat al disseny d’agentsmultifuncionals que combatin els múltiples factors que caracteritzen el desenvolupament de la MA. En el present treball s’han dissenyat agents multifuncionals inspirats en dos esquelets moleculars ben establers i coneguts en el camp de la química medicinal: la tioflavina-T (ThT) i la deferiprona (DFP). La utilització de tècniques in silico que inclouen càlculs farmacocinètics i modelatge molecular ha estat un procés cabdal per a l’avaluació dels millors candidats en base als següents requeriments: (a) compliment de determinades propietats farmacocinètiques que estableixin el seu possible ús com a fàrmac (b) hidrofobicitat adequada per travessar la BBB i (c) interacció amb el pèptid Aen solució.

Projecte d’intervenció Compartim i participem per créixer junts.

El projecte d’intervenció objecte d’aquest treball es desenvoluparà al municipi de Palau-solità i Plegamans, concretament amb el col•lectiu d’infants de 3 a 6 anys i els seus pares i mares. L’Ajuntament del municipi va fer l’encàrrec per a que es desenvolupés aquest projecte. Una de les temàtiques que aquesta administració vol incloure arreld’aquesta intervenció és la participació infantil, que serà la prioritat principal del projecte. Tot i això, s’inclouran altres temàtiques després de conèixer i analitzar lesopinions i demandes dels pares i mares d’infants de 3 a 6 anys a través d’una enquesta, creada específicament per aquesta intervenció, i les característiques i necessitats del desenvolupament vital d’aquests infants. La intervenció que es realitzarà amb aquest col•lectiu es dividirà en dos grups: per una banda, els infants i, per l’altra, els pares i mares d’aquests. Les temàtiques es dividiran en vuit sessions, en les que gran part d’aquestes es treballaran amb cada grup per separat però a gairebé totes les sessions es destinarà la part final a unir els dos grups per treballar de manera conjunta.

Systematic Identification of High Crash Locations Final Report, 2001

Federal and state policy makers increasingly emphasize the need to reduce highway crash rates. This emphasis is demonstrated in Iowa’s recently released draft Iowa Strategic Highway Safety Plan and by the U.S. Department of Transportation’s placement of “improved transportation safety” at the top of its list of strategic goals. Thus, finding improved methods to enhance highway safety has become a top priority at highway agencies. The objective of this project is to develop tools and procedures by which Iowa engineers can identify potentially hazardous roadway locations and designs, and to demonstrate the utility of these tools by developing candidate lists of high crash locations in the State. An initial task, building an integrated database to facilitate the tools and procedures, is an important product, in and of itself. Accordingly, the Iowa Department of Transportation (Iowa DOT) Geographic Information Management System (GIMS) and Geographic Information System Accident Analysis and Location System (GIS-ALAS) databases were integrated with available digital imagery. (The GIMS database contains roadway characteristics, e.g., lane width, surface and shoulder type, and traffic volume, for all public roadways. GIS-ALAS records include data, e.g., vehicles, drivers, roadway conditions, and the crash severity, for crashes occurring on public roadways during then past 10 years.)