Tropical, de Anita Malfatti

A partir da análise de Tropical, tela pintada por Anita Malfatti em 1917, este artigo propõe que a artista procedia a uma mudança em sua linguagem pictórica, afastando-se das concepções de vanguarda que adotara até então para, aderindo ao clima de retorno à ordem internacional, aproximar-se das discussões sobre o nacionalismo na arte, presentes na cena paulistana. Assim, a imagem de mulher insegura que mudou sua perspectiva por causa da crítica de Monteiro Lobato adquire outra conotação. Os modernistas teriam preferido essa interpretação a efetuar uma análise da obra de Anita Malfatti, por meio da qual se poderia desvelar uma deserção do programa vanguardista feita de forma consciente pela artista

Theoretical chemistry: current applications to photochemistry and thermochemistry

A historical perspective is given contrasting challenges and advances in theoretical chemistry at the time the first issue of Theoretical Chemistry Accounts appeared in 1962 and the progress achieved since then as expressed in current state-of-the-art applications in photochemistry and thermochemistry.

Isolation and biochemical, functional and structural characterization of a novel L-amino acid oxidase from Lachesis muta snake venom

The aim of this study was the isolation of the LAAO from Lachesis muta venom (LmLAAO) and its biochemical, functional and structural characterization. Two different purification protocols were developed and both provided highly homogeneous and active LmLAAO. It is a homodimeric enzyme with molar mass around 120 kDa under non-reducing conditions, 60 kDa under reducing conditions in SDS-PAGE and 60852 Da by mass spectrometry. Forty amino acid residues were directly sequenced from LmLAAO and its complete cDNA was identified and characterized from an Expressed Sequence Tags data bank obtained from a venom gland. A model based on sequence homology was manually built in order to predict its three-dimensional structure. LmLAAO showed a catalytic preference for hydrophobic amino acids (K-m of 0.97 mmol/L with Leu). A mild myonecrosis was observed histologically in mice after injection of 100 mu g of LmLAAO and confirmed by a 15-fold increase in CK activity. LmLAAO induced cytotoxicity on AGS cell line (gastric adenocarcinoma, IC50: 22.7 mu g/mL) and on MCF-7 cell line (breast adenocarcinoma, IC50:1.41 mu g/mL). It presents antiparasitic activity on Leishmania brasiliensis (IC50: 2.22 mu g/nnL), but Trypanosoma cruzi was resistant to LmLAAO. In conclusion, LmLAAO showed low systemic toxicity but important in vitro pharmacological actions. (C) 2012 Elsevier Ltd. All rights reserved.

Three Postpartum Antiretroviral Regimens to Prevent Intrapartum HIV Infection

BACKGROUND The safety and efficacy of adding antiretroviral drugs to standard zidovudine prophylaxis in infants of mothers with human immunodeficiency virus (HIV) infection who did not receive antenatal antiretroviral therapy (ART) because of late identification are unclear. We evaluated three ART regimens in such infants. METHODS Within 48 hours after their birth, we randomly assigned formula-fed infants born to women with a peripartum diagnosis of HIV type 1 (HIV-1) infection to one of three regimens: zidovudine for 6 weeks (zidovudine-alone group), zidovudine for 6 weeks plus three doses of nevirapine during the first 8 days of life (two-drug group), or zidovudine for 6 weeks plus nelfinavir and lamivudine for 2 weeks (three-drug group). The primary outcome was HIV-1 infection at 3 months in infants uninfected at birth. RESULTS A total of 1684 infants were enrolled in the Americas and South Africa (566 in the zidovudine-alone group, 562 in the two-drug group, and 556 in the three-drug group). The overall rate of in utero transmission of HIV-1 on the basis of Kaplan-Meier estimates was 5.7% (93 infants), with no significant differences among the groups. Intrapartum transmission occurred in 24 infants in the zidovudine-alone group (4.8%; 95% confidence interval [CI], 3.2 to 7.1), as compared with 11 infants in the two-drug group (2.2%; 95% CI, 1.2 to 3.9; P=0.046) and 12 in the three-drug group (2.4%; 95% CI, 1.4 to 4.3; P=0.046). The overall transmission rate was 8.5% (140 infants), with an increased rate in the zidovudine-alone group (P=0.03 for the comparisons with the two-and three-drug groups). On multivariate analysis, zidovudine monotherapy, a higher maternal viral load, and maternal use of illegal substances were significantly associated with transmission. The rate of neutropenia was significantly increased in the three-drug group (P < 0.001 for both comparisons with the other groups). CONCLUSIONS In neonates whose mothers did not receive ART during pregnancy, prophylaxis with a two-or three-drug ART regimen is superior to zidovudine alone for the prevention of intrapartum HIV transmission; the two-drug regimen has less toxicity than the three-drug regimen. (Funded by the Eunice Kennedy Shriver National Institute of Child Health and Human Development [NICHD] and others; ClinicalTrials.gov number, NCT00099359.)

Magnetic and optical investigation of 40SiO(2)center dot 30Na(2)O center dot 1Al(2)O(3)center dot(29-x) B2O3 center dot xFe(2)O(3) glass matrix

Samples of 40SiO(2)center dot 30Na(2)O center dot 1Al(2)O(3)center dot(29 - x)B2O3 center dot xFe(2)O(3) (mol%), with 0.0 <= x <= 17.5, were prepared by the fusion method and investigated by electron paramagnetic resonance (EPR), optical absorption (OA) and Mossbauer spectroscopy (MS). The EPR spectra of the as-synthesized samples exhibit two well-defined EPR signals around g = 4.27 and g = 2.01 and a visible EPR shoulder around g = 6.4, assigned to isolated Fe3+ ion complexes (g = 4.27 and g = 6.4) and Fe3+-based clusters (g = 2.01). Analyses of both EPR line intensity and line width support the model picture of Fe3+-based clusters built in from two sources of isolated ions, namely Fe2+ and Fe3+; the ferrous ion being used to build in iron-based clusters at lower x-content (below about x = 2.5%) whereas the ferric ion is used to build in iron-based clusters at higher x-content (above about x = 2.5%). The presence of Fe2+ ions incorporated within the glass template is supported by OA data with a strong band around 1100 nm due to the spin-allowed E-5(g)-T-5(2g) transition in an octahedral coordination with oxygen. Additionally, Mossbauer data (isomer shift and quadrupole splitting) confirm incorporation of both Fe2+ and Fe3+ ions within the template, more likely in tetrahedral-like environments. We hypothesize that ferrous ions are incorporated within the glass template as FeO4 complex resulting from replacing silicon in non-bridging oxygen (SiO3O-) sites whereas ferric ions are incorporated as FeO4 complex resulting from replacing silicon in bridging-like oxygen silicate groups (SiO4). (C) 2012 Elsevier Masson SAS. All rights reserved.

A UML profile for the OBO relation ontology

Background: Ontologies have increasingly been used in the biomedical domain, which has prompted the emergence of different initiatives to facilitate their development and integration. The Open Biological and Biomedical Ontologies (OBO) Foundry consortium provides a repository of life-science ontologies, which are developed according to a set of shared principles. This consortium has developed an ontology called OBO Relation Ontology aiming at standardizing the different types of biological entity classes and associated relationships. Since ontologies are primarily intended to be used by humans, the use of graphical notations for ontology development facilitates the capture, comprehension and communication of knowledge between its users. However, OBO Foundry ontologies are captured and represented basically using text-based notations. The Unified Modeling Language (UML) provides a standard and widely-used graphical notation for modeling computer systems. UML provides a well-defined set of modeling elements, which can be extended using a built-in extension mechanism named Profile. Thus, this work aims at developing a UML profile for the OBO Relation Ontology to provide a domain-specific set of modeling elements that can be used to create standard UML-based ontologies in the biomedical domain. Results: We have studied the OBO Relation Ontology, the UML metamodel and the UML profiling mechanism. Based on these studies, we have proposed an extension to the UML metamodel in conformance with the OBO Relation Ontology and we have defined a profile that implements the extended metamodel. Finally, we have applied the proposed UML profile in the development of a number of fragments from different ontologies. Particularly, we have considered the Gene Ontology (GO), the PRotein Ontology (PRO) and the Xenopus Anatomy and Development Ontology (XAO). Conclusions: The use of an established and well-known graphical language in the development of biomedical ontologies provides a more intuitive form of capturing and representing knowledge than using only text-based notations. The use of the profile requires the domain expert to reason about the underlying semantics of the concepts and relationships being modeled, which helps preventing the introduction of inconsistencies in an ontology under development and facilitates the identification and correction of errors in an already defined ontology.

Arquitetura brutalista e estratégia de transportes no triângulo mineiro: estações ferroviárias da Mogiana e Terminal Rodoviário Presidente Castelo Branco

Em 1989, Brandão descrevia o Triângulo Mineiro como “fruto da ambiguidade de seu estigma de fazer parte de Minas, mas ser articulada economicamente a São Paulo.” A mesorregião do Triângulo Mineiro e Alto Paranaíba, faz fronteira com os estados de Goiás, São Paulo e Mato Grosso do Sul, interligando também com a Central Mineira e com o Oeste de Minas, sendo a característica de “rota de passagem” como principal fator do desenvolvimento de sua economia. O posicionamento estratégico da região, como eixo de ligação da capital paulista ao chamado Brasil Central, pode ser considerado um importante fator no estreitamento dos laços entre a região e São Paulo, somado ao sentimento de não pertencimento do Triângulo ao estado de Minas Gerais, o qual resultou por décadas em manifestações separatistas na região. A arquitetura moderna produzida no Triângulo Mineiro e Alto Paranaíba deu um salto significativo no momento de construção da nova capital federal, em finais da década de 1950, onde o papel de mediação, principalmente da cidade de Uberlândia, no processo de infra-estruturação da nova cidade foi determinante nos avanços construtivos do Triângulo. Esse momento coincidiu com o início do processo de verticalização das principais cidades da região e o aumento de arquitetos residentes nas cidades. Por meio, em especial, dos edifícios para as estações ferroviárias da Cia Mogiana, de Oswaldo Arthur Bratke em Uberaba e Uberlândia (déc. 1960) e do Terminal Rodoviário Presidente Castelo Branco em Uberlândia, dos arquitetos Fernando Graça, Flávio Almada e Ivan Curpertino (1970), este trabalho objetiva conduzir uma discussão acerca da produção de arquitetura moderna no Triângulo Mineiro ligada às estratégias de transportes intermunicipais como própria cultura de desenvolvimento econômico da região. Nos interessa valer do debate entre o uso da estética brutalista, e da própria escolha por uma arquitetura moderna, como artifício no plano de desenvolvimento das empresas de transporte, e dos governos locais. Sobretudo, discutir as interlocuções do Triângulo Mineiro com São Paulo, rebatendo-as na formação do conjunto arquitetonico moderno produzido na região. Este trabalho é fruto da pesquisa de mestrado da autora cujo tema central é a difusão da arquitetura moderna no Triângulo Mineiro e Alto Paranaíba, pelo Iau/Usp, e financiado pela Capes.

Prototipo del aplicación de recomendaciones sobre la dieta mediterránea

[ES] Este prototipo pretende servir como base de una aplicación que busca mejorar el estilo de vida mediante la adaptación a la dieta mediterránea,  una de las dietas con mayor aceptación por parte de los expertos del campo de la salud. Este software consiste en una aplicación servidor en entorno Ruby on Rails que realiza la función de gestor de contenidos para la aplicación del dispositivo móvil bajo plataforma iOS usando Objective-C, comunicadas entre sí por una API REST. Entre sus funciones, se permite evaluar el nivel de adaptación a la dieta mediterránea del usuario, ofreciéndole posteriormente un menú variado siguiendo las recomendaciones de dietistas expertos. Dicho menú es individualizado, tomando en cuenta las diferentes alergias que padece el usuario para realizar un filtrado de las recetas, consultables en todo momento desde la aplicación. Se presentan además una serie de pantallas interactivas con información sobre la dieta mediterránea y la vida sana.

Models for the study of neuronal activity during cognitive tasks

Assessment of brain connectivity among different brain areas during cognitive or motor tasks is a crucial problem in neuroscience today. Aim of this research study is to use neural mass models to assess the effect of various connectivity patterns in cortical EEG power spectral density (PSD), and investigate the possibility to derive connectivity circuits from EEG data. To this end, two different models have been built. In the first model an individual region of interest (ROI) has been built as the parallel arrangement of three populations, each one exhibiting a unimodal spectrum, at low, medium or high frequency. Connectivity among ROIs includes three parameters, which specify the strength of connection in the different frequency bands. Subsequent studies demonstrated that a single population can exhibit many different simultaneous rhythms, provided that some of these come from external sources (for instance, from remote regions). For this reason in the second model an individual ROI is simulated only with a single population. Both models have been validated by comparing the simulated power spectral density with that computed in some cortical regions during cognitive and motor tasks. Another research study is focused on multisensory integration of tactile and visual stimuli in the representation of the near space around the body (peripersonal space). This work describes an original neural network to simulate representation of the peripersonal space around the hands, in basal conditions and after training with a tool used to reach the far space. The model is composed of three areas for each hand, two unimodal areas (visual and tactile) connected to a third bimodal area (visual-tactile), which is activated only when a stimulus falls within the peripersonal space. Results show that the peripersonal space, which includes just a small visual space around the hand in normal conditions, becomes elongated in the direction of the tool after training, thanks to a reinforcement of synapses.

Analisi degli aspetti di qualità nella gestione dei sistemi di drenaggio urbano attraverso modellazione numerica e indagini di campo

In order to protect river water quality, highly affected in urban areas by continuos as intermittent immissions, it is necessary to adopt measures to intercept and treat these polluted flows. In particular during rain events, river water quality is affected by CSOs activation. Built in order to protect the sewer system and the WWTP by increased flows due to heavy rains, CSOs divert excess flows to the receiving water body. On the basis of several scientific papers, and of direct evidences as well, that demonstrate the detrimental effect of CSOs discharges, also the legislative framework moved towards a stream standard point of view. The WFD (EU/69/2000) sets new goals for receiving water quality, and groundwater as well, through an integrated immission/emissions phylosophy, in which emission limits are associated with effluent standards, based on the receiving water characteristics and their specific use. For surface waters the objective is that of a “good” ecological and chemical quality status. A surface water is defined as of good ecological quality if there is only slight departure from the biological community that would be expected in conditions of minimal anthropogenic impact. Each Member State authority is responsible for preparing and implementing a River Basin Management Plan to achieve the good ecological quality, and comply with WFD requirements. In order to cope with WFD targets, and thus to improve urban receiving water quality, a CSOs control strategy need to be implemented. Temporarily storing the overflow (or at least part of it) into tanks and treating it in the WWTP, after the end of the storm, showed good results in reducing total pollutant mass spilled into the receiving river. Italian State Authority, in order to comply with WFD statements, sets general framework, and each Region has to adopt a Water Remediation Plan (PTA, Piano Tutela Acque), setting goals, methods, and terms, to improve river water quality. Emilia Romagna PTA sets 25% reduction up to 2008, and 50% reduction up to 2015 fo total pollutants masses delivered by CSOs spills. In order to plan remediation actions, a deep insight into spills dynamics is thus of great importance. The present thesis tries to understand spills dynamics through a numerical and an experimental approach. A four months monitoring and sampling campaign was set on the Bologna sewer network, and on the Navile Channel, that is the WWTP receiving water , and that receives flows from up to 28 CSOs during rain events. On the other hand, the full model of the sewer network, was build with the commercial software InfoWorks CS. The model was either calibrated with the data from the monitoring and sampling campaign. Through further model simulations interdependencies among masses spilled, rain characteristics and basin characteristics are looked for. The thesis can be seen as a basis for further insighs and for planning remediation actions.

Architettura delle centrali idroelettriche italiane 1910-1940. L'esperienza di Giovanni Muzio e Piero Portaluppi

Oggetto della ricerca è il tema dello spazio delle centrali idroelettriche costruite nella prima metà del Novecento dagli architetti Giovanni Muzio e Piero Portaluppi. L’individuazione del tema sorge dalla volontà di indagare quali siano stati gli sviluppi dal punto di vista architettonico all’interno di un genere così specifico durante un periodo di tempo in cui gli stili architettonici e le tendenze hanno subito stravolgimenti ed evoluzioni che ancora oggi trovano una difficile connotazione e definizione precisa. L’analisi dell’architettura delle centrali idroelettriche, effettuata ripercorrendo le principali vicende del settore idroelettrico dalla fine del secolo scorso al secondo dopoguerra, oltre a considerare il rapporto con il contesto territoriale e culturale del nostro Paese vuole prendere in considerazione anche il particolare rapporto che in più casi si è venuto a creare tra committenti e progettisti. Compito della tesi è rileggere un settore poco indagato finora e capire se vi sia stata effettivamente una evoluzione architettonica dal punto di vista tipologico o se la centrale sia stata sempre affrontata come semplice esercizio di “vestizione” di un involucro precostituito da precise esigenze tecniche. La ricerca infatti si pone come obiettivo lo studio delle centrali non solo dal punto di vista tipologico e spaziale dei suoi principali elementi, ma si pone come obiettivo anche lo studio della loro distribuzione nel sito in cui sono sorte, distribuzione che spesso ha portato alla formazione di una sorta di vera e propria “città elettrica”, in cui la composizione dei vari elementi segue una logica compositiva ben precisa. Dal punto di vista del contributo originale la ricerca vuole proporre una serie di riflessioni ed elaborati inerenti alcune centrali non ancora indagate. Nel caso specifico di Portaluppi l’apporto originale consiste nell’aver portato alla luce notizie inerenti centrali che sono sempre state poste in secondo piano rispetto le ben più note e studiate centrali della Val d’Ossola. Nel caso invece di Muzio il contributo consiste in una analisi approfondita e in una comparazione di documenti che di solito sono sempre stati pubblicati come semplice apparato iconografico, ma che messi a confronto danno una lettura di quelle che sono state le fasi e le elaborazioni progettuali apportate dall’autore. Il tema della ricerca è stato affrontato poi attraverso una lettura delle fonti dirette relative agli scritti degli autori, con una contemporanea lettura di testi, articoli e interventi tratti dalle riviste appartenenti al periodo in esame per comprendere al meglio il panorama culturale e architettonico che hanno fatto da scenario alle esperienze di entrambe le figure oggetto di studio. Infine la ricerca si è concentrata sull’analisi di alcune opere in particolare - due centrali idroelettriche per ciascun autore oggetto della tesi - scelte perché considerate rappresentative sia per impianto spaziale e tipologico, sia per le scelte compositive e stilistiche adottate. La lettura dei manufatti architettonici scelti è stata condotta con l’analisi di copie di elaborati grafici originali, foto d’epoca e altri documenti reperiti grazie ad una ricerca condotta in vari archivi. Le centrali scelte nell’ambito delle esperienze maturate da Muzio e Portaluppi sono state individuate per rappresentare il quadro relativo allo sviluppo e alla ricerca di un nuovo linguaggio formale da adottare nell’ambito dell’architettura di questi manufatti. Per entrambi i protagonisti oggetto della ricerca sono state individuate due centrali in grado di dare una visione il più possibile completa dell’evoluzione della tematica delle centrali idroelettriche all’interno della loro esperienza, prendendo in considerazione soprattutto gli aspetti legati all’evoluzione del loro linguaggio compositivo e stilistico. L’individuazione delle centrali da analizzare è stata dettata prendendo in considerazione alcuni fattori come il tipo di impianto, le relazioni e confronto con il contesto geografico e naturale e le soluzioni adottate.

Metodi di ottimizzazione morfologica nel progetto preliminare di propulsori aeronautici avanzati

The aim of this Doctoral Thesis is to develop a genetic algorithm based optimization methods to find the best conceptual design architecture of an aero-piston-engine, for given design specifications. Nowadays, the conceptual design of turbine airplanes starts with the aircraft specifications, then the most suited turbofan or turbo propeller for the specific application is chosen. In the aeronautical piston engines field, which has been dormant for several decades, as interest shifted towards turboaircraft, new materials with increased performance and properties have opened new possibilities for development. Moreover, the engine’s modularity given by the cylinder unit, makes it possible to design a specific engine for a given application. In many real engineering problems the amount of design variables may be very high, characterized by several non-linearities needed to describe the behaviour of the phenomena. In this case the objective function has many local extremes, but the designer is usually interested in the global one. The stochastic and the evolutionary optimization techniques, such as the genetic algorithms method, may offer reliable solutions to the design problems, within acceptable computational time. The optimization algorithm developed here can be employed in the first phase of the preliminary project of an aeronautical piston engine design. It’s a mono-objective genetic algorithm, which, starting from the given design specifications, finds the engine propulsive system configuration which possesses minimum mass while satisfying the geometrical, structural and performance constraints. The algorithm reads the project specifications as input data, namely the maximum values of crankshaft and propeller shaft speed and the maximal pressure value in the combustion chamber. The design variables bounds, that describe the solution domain from the geometrical point of view, are introduced too. In the Matlab® Optimization environment the objective function to be minimized is defined as the sum of the masses of the engine propulsive components. Each individual that is generated by the genetic algorithm is the assembly of the flywheel, the vibration damper and so many pistons, connecting rods, cranks, as the number of the cylinders. The fitness is evaluated for each individual of the population, then the rules of the genetic operators are applied, such as reproduction, mutation, selection, crossover. In the reproduction step the elitist method is applied, in order to save the fittest individuals from a contingent mutation and recombination disruption, making it undamaged survive until the next generation. Finally, as the best individual is found, the optimal dimensions values of the components are saved to an Excel® file, in order to build a CAD-automatic-3D-model for each component of the propulsive system, having a direct pre-visualization of the final product, still in the engine’s preliminary project design phase. With the purpose of showing the performance of the algorithm and validating this optimization method, an actual engine is taken, as a case study: it’s the 1900 JTD Fiat Avio, 4 cylinders, 4T, Diesel. Many verifications are made on the mechanical components of the engine, in order to test their feasibility and to decide their survival through generations. A system of inequalities is used to describe the non-linear relations between the design variables, and is used for components checking for static and dynamic loads configurations. The design variables geometrical boundaries are taken from actual engines data and similar design cases. Among the many simulations run for algorithm testing, twelve of them have been chosen as representative of the distribution of the individuals. Then, as an example, for each simulation, the corresponding 3D models of the crankshaft and the connecting rod, have been automatically built. In spite of morphological differences among the component the mass is almost the same. The results show a significant mass reduction (almost 20% for the crankshaft) in comparison to the original configuration, and an acceptable robustness of the method have been shown. The algorithm here developed is shown to be a valid method for an aeronautical-piston-engine preliminary project design optimization. In particular the procedure is able to analyze quite a wide range of design solutions, rejecting the ones that cannot fulfill the feasibility design specifications. This optimization algorithm could increase the aeronautical-piston-engine development, speeding up the production rate and joining modern computation performances and technological awareness to the long lasting traditional design experiences.