A Construção da História em Serena, de Ian McEwan

Esta dissertação constitui uma reflexão sobre a situação social, política e cultural da Inglaterra na década de 70, especialmente nos anos de 1972 e 1973, como descrita no romance Serena, de Ian McEwan. O objetivo principal desta pesquisa é apresentar como o momento histórico supracitado é narrado no discurso ficcional, a partir da perspectiva da personagem Serena, em comparação com o discurso histórico, de acordo com fontes selecionadas, que narram a história da Inglaterra no contexto da Guerra Fria, dos ataques terroristas do IRA e do funcionamento do Serviço Secreto doméstico inglês, chamado MI5.

Análise da evolução termomecânica da Bacia do Amazonas

Os dados geológicos e geofísicos escolhidos para o tema de estudo pertencem a Bacia do Amazonas, na região centro-norte do Brasil. A Bacia do Amazonas é uma bacia intracratônica com cerca de 500.000 km. A mesma está limitada ao norte pelo Escudo das Guianas e ao sul pelo Escudo Brasileiro. O limite oeste com a Bacia do Solimões é marcado pelo Arco de Purus, ao passo que o Arco de Gurupá constitui seu limite leste. Possui características inerentes a uma bacia intracratônica paleozóica, com uma longa história evolutiva, marcada por discordâncias expressivas e com uma cunha sedimentar relativamente rasa se comparada às bacias cretáceas brasileiras, o que levanta controvérsia a respeito da suficiência do soterramento para a eficiência de geração de hidrocarboneto. Podem ser reconhecidas nos 5000 m do preenchimento sedimentar da Bacia do Amazonas, duas seqüências de primeira ordem: uma paleozóica, intrudida por diques e soleiras de diabásio, na passagem do Triássico para o Jurássico, e uma mesozóica-cenozóica que representam um aspecto importante na evolução térmica da matéria orgânica que ocorre na primeira seqüência. Com relação à exploração de petróleo, apesar do fomento exploratório ocorrido nos últimos anos, a bacia ainda é considerada pouco explorada sendo sua maior reserva a da província de Urucu. Um dos fatores que dificultam bastante a exploração desta bacia assim como a bacia do Solimões a oeste é o acesso restrito, pois estão situadas em áreas remotas e florestadas, de difícil acesso, com muitas reservas indígenas e florestais, o que causa restrições logísticas, operacionais e legais. O efeito térmico das intrusões ígneas é considerado como o responsável pelo acréscimo de calor necessário à maturação da matéria orgânica e conseqüente geração de hidrocarbonetos. Este trabalho contribui com a reconstrução da história térmica desta bacia a partir da modelagem das variáveis termais e da história de soterramento. Para isso, foram utilizados modelos consagrados na literatura, que permitem, de forma simples, a estimativa do fluxo térmico através do embasamento e da seqüência sedimentar. Na análise da influência de intrusões ígneas na estrutura térmica da bacia, o modelo bidimensional desenvolvido pelo método de diferenças finitas se mostrou apropriado. Utilizou-se o fluxo térmico basal calculado nas condições de contorno da modelagem da influência térmica das ígneas. Como resultado obteve-se a estruturação térmica da bacia e a historia maturação de suas rochas geradoras

Análise numérica do efeito de sobrecargas assimétricas em estacas: estudo de pontes nas obras do Arco Metropolitano.

O presente trabalho aborda o efeito de sobrecargas assimétricas em estacas, através do estudo de caso de encontros da Ponte do Rio Capivari nas obras do Arco Metropolitano. Neste caso específico as estacas foram construídas previamente a execução de aterros em terra armada e para minimizar o efeito de Tschebotarioff o solo foi reforçado com colunas de brita. Com embasamento na revisão bibliográfica apresentada foi realizada a análise pelo Método dos Elementos Finitos. Esta análise, realizada pelo programa computacional Plaxis, teve como foco principal a obtenção dos deslocamentos e momentos fletores nas estacas para os dois casos analisados: sem colunas de brita e com solo homogêneo equivalente (com colunas de brita). Foi possível verificar a influência da introdução das colunas de brita na redução dos momentos fletores e deslocamentos horizontais nas estacas dos encontros. Realizou-se ainda uma simulação em que as estacas seriam construídas após a realização dos aterros em terra armada onde pode-se constatar que o efeito de sobrecargas assimétricas seria mitigado. Foi efetuada também a comparação entre os deslocamentos provenientes de dados coletados da instrumentação de campo (inclinômetros) e os obtidos pelas análises numéricas, estando os mesmos compatíveis entre si, demonstrando que a metodologia adotada para simulação das colunas de brita no Método dos Elementos finitos foi adequada.

Morphometry, length-weight relationship and food and feeding habits of Otolithoides biauritus (Cantor, 1850) of Bombay waters

Thirteen morphometric and seven meristic characters, length-weight relationship and food and feeding habits of Otolithoides biauritus of Bombay coast (Maharashtra, India) were studied. Compared morphometric characters revealed positive allometric growth and high correlation ("r" ranging 0.898 - 0.996) between each other. Meristic characters were observed to be B sub(vii), D sub(1) 8-10, D sub(2) 27-31, P 17-20, V 5-7 and 7-10. Number of gill rackers on the first left gill arch ranged from 15 to 19. Length-weight relationship for both sexes together worked out to be W = 0.026, L super(2.646). The species is a predator, feeding mainly on motile Acetes, small fish and Loligo in order of preference.

Nutritional evaluation of some small coastal fish in Sri Lanka

Small pelagic fish play a very important role in human nutrition and health. Lipids of these fish differ remarkably from plant and other animal lipids. The aim of the study was to describe the proximate composition of thirty-three small pelagic fish species commonly available in Sri Lanka. Fish species were collected from Negombo and Chillaw fish landing sites and subjected to analysis for moisture, ash, protein and total lipid content. Tiger tooth croaker (Otolithus ruber) was found to have the highest moisture percentage (80.0%) followed by Clarias sp. (78.9%), Indian anchovy (Steloporus indicus) and Comerson's anchovy (Stelophorus commersonii), (78%). The lowest percentage of moisture, 69.4%, was recorded in white sardinella (Sardinella albella). Indian ilisha (Ilisha melastoma) was found to have the highest amount of ash (10.1%) followed by Otolithus sp. (8%) and big-eye barracuda contained the least amount (2.5%). Carassius Carassius, pick handle barracuda (Sphyraena jello) and Indian mackerel (Rastrelliger kanagurta) contained higher amounts of protein, 24.3, 20.6 and 19.2% respectively. The lowest protein content (10.1%) was found in Indian scad (Decapterus russelli). The protein content of the fish was in the range of 13-15%. The results revealed that the small fish are moderate protein sources. The total lipid content varied between 0.6-8%. White sardinella recorded the highest percentage of lipid (8%) where tiger tooth croaker contained the lowest percentage (0.6 %). The study showed high fatty species to contain low amount of moisture and vice versa establishing an inverse relation between fat and moisture quantitatively.

Fracture and energy partitioning in uncooked and cooked noodles

Humans perform fascinating science experiments at home on a daily basis when they undertake the modification of natural and naturally-derived materials by a cooking process prior to consumption. The material properties of such foods are of interest to food scientists (texture is often fundamental to food acceptability), oral biologists (foods modulate feeding behavior), anthropologists (cooking is probably as old as the genus Homo and distinguishes us from all other creatures) and dentists (foods interact with tooth and tooth replacement materials). Materials scientists may be interested in the drastic changes in food properties observed over relatively short cooking times. In the current study, the mechanical properties of one of the most common (and oldest at 4,000+ years) foods on earth, the noodle, were examined as a function of cooking time. Two types of noodles were studied, each made from natural materials (wheat flour, salt, alkali and water) by kneading dough and passing them through a pasta-making machine. These were boiled for between 2-14 min and tested at regular intervals from raw to an overcooked state. Cyclic tensile tests at small strain levels were used to examine energy dissipation characteristics. Energy dissipation was >50% per cycle in uncooked noodles, but decreased by an order of magnitude with cooking. Fractional dissipation values remained approximately constant at cooking times greater than 7 min. Overall, a greater effect of cooking was on viscoplastic dissipation characteristics rather than on fracture resistance. The results of the current study plot the evolution of a viscoplastic mixture into an essentially elastic material in the space of 7 minutes and have broad implications for understanding what cooking does to food materials. In particular, they suggest that textural assessment by consumers of the optimally cooked state of food has a definite physical definition. © 2007 Materials Research Society.

The study of biological characteristics and determination of population dynamic parameters of sawtooth barracuda (Sphyraena putnamae) in the Persian Gulf (Hormozgun Province waters)

The biological characteristics and population dynamisms of Sphyraena putnamae, were studied in the northern Persian Gulf and Oman Sea restricted to Hormuzgan province waters within 13 months period, from November 2006 up to November 2007. Biometrical and anatomical measurements were carried out, and biological surveys were conducted on 486 specimens. On the other hand, the growth and mortality parameters were estimated by using 3096 samples. These samples were collected from 3 landings, namely Bandar Abbas, Bandar Lengeh and Bandar Jask. The measurements of the minimum and maximum Fork lengths and weights were 11.7 to 8.03 cm and 135.0 to 4140.0 g, respectively. The results indicated that this species, having the Relative Length of Gut, RLG=0.34±0.002, is strongly carnivorous (often fish-eater), proven by the fact that more than 98% of its stomach contents were fish pieces. Examining the changes in the index of stomach emptiness by the percentage of CV = 0.47% indicates that this fish is Moderate feeder. The level of feeding increased in March, before spawning and decreased in June and September, simultaneously with the spawning season. There are 2 peaks of reproduction or spawning seasons during the months of April-May and September, of which the prior is assumed as the main spawning. The sex ratio (M:F) was calculated 0.5:1.0(X2 =2.11), which did not show a significant difference with expected level of 1:1 (P>0.05). The average absolute and relative reproduction rates of Sphyraena putnamae is respectively as follows: 1866827.1±255448.9 and 1097.7±94.3. The highest and the lowest diameter of matured egg are from 200 to 750 μ, and its average diameter is 402.10 ± 0.190 μ. A parameter for Saw-tooth barracuda length measurement, Lm50, based on the Fork-length, was calculated as 54.01 cm. In other words, as far as the fisheries management is concerned, the fish whose lengths are less than 54.01 cm should not be caught. The calculated level of (R2) (correlations of total length & weight), indicated strong correlations between length and weight of this fish, and the obtained formula included W =0.007100 FL 2.9295 and reinforced this assumption. The “K” Index for this fish in 3 above mentioned landings (Jask, Bandar-Abbas and Bandar-Length) were 1.24, 0.37 and 0.46 per year, respectively and the FL index for the same landings were estimated as 129, 110 and 134 cm, respectively. The growth coefficient (MONRO) for the above mentioned regions were calculated as 3.601, 3.647 and 3.917, respectively; and in the surveyed regions there were no significant differences in populations. The Total mortality coefficient (Z) was calculated 0.76, 1.12 and 1.07 per year, the Natural mortality coefficient was 0.46, 0.63 and 0.70, and the Fishing mortality coefficient (rate) (F) was found to be 0.30, 0.49 and 0.37 per year. The value of the exploitation rate (E) is equal to 0.39 per year, indicating that this species is an under-exploited resource, and there is no excessive fishing pressure on the fish supply of this species in the afore-said regions. The highest level of exploitation was found for ‘Bandar Abbas’ fishing region and the lowest level of exploitation is in ‘Bandar Lengeh’ waters.

A new species of the genus Tor from Yunnan, China (Teleostei : Cyprinidae)

A new species of the subfamily Barbinae, Tor yingjiangensis, is recognized from Yunnan province, China. It can be distinguished from other Tor species by the following combination of characters: last simple dorsal-fin ray osseous and non-serrated; no forward directed predorsal procumbent spine; head length considerably longer than body depth; no tubercles on the snout or sides of the face; 18-20 gill rakers on the outside of first gill arch; 24-26 lateral line scales; median lobe of lower lip short, its posterior margin truncate, not extending to the vertical across the inner corners of the mouth; and the condition of the lower lip consistent in individuals of different sizes. The new species has been misidentified previously as Tor putitora (Hamilton, F. 1822. An account of the fishes found in the River Ganges and its Branches. Edinburgh & London. 405 pp), which occurs in the Ganges and Indus River basins. The new species can easily be distinguished from T. putitora by having 3-3.5 (vs. 2.5) scales from lateral line to pelvic-fin origin, shorter caudal peduncle length (13.0% vs. 17.2% of standard length), lesser body depth (26.4% vs. 24.0% of standard length) and longer caudal peduncle depth (12.0% vs. 10.9% of standard length), no longitudinal stripe present along side of body, and eyes visible in ventral view of head.

High-order DES and zonal LES of a labyrinth seal

Hybrid numerical large eddy simulation (NLES) and detached eddy simulation (DES) methods are assessed on a labyrinth seal geometry. A high sixth order discretization scheme is used and is validated using a test case of a two dimensional vortex. The hybrid approach adopts a new blending function and along with DES is initially validated using a simple cavity flow. The NLES method is also validated outside of RANS zones. It is found that there is very little resolved turbulence in the cavity for the DES simulation. For the labyrinth seal calculations the DES approach is problematic giving virtually no resolved turbulence content. It is seen that over the tooth tips the extent of the LES region is small and is likely to be a strong contributor to excessive flow damping in these regions. On the other hand the zonal Hamilton-Jacobi approach did not suffer from this trait. In both cases the meshes used are considered to be hybrid RANS-LES adequate. Fortunately (or perhaps unfortunately) the DES profiles are in agreement with the time mean experimental measurements. It is concluded that for an inexperienced CFD practitioner this could have wider implications particularly if transient results such as unsteady loading are desired. Copyright © 2012 by the American Institute of Aeronautics and Astronautics, Inc.

Description of a new genus and two new species of labeonine fishes from South China (Teleostei : Cyprinidae)

A new genus and two new species are described from the Pearl River drainage in Guangxi Province, South China. Hongshuia, new genus, can be distinguished from all other Asian genera of the Labeonini by having a lower lip with its median lobe modified into a round, fleshy plate peripherally greatly protruded so as to form a ring-like fold that is posteromedially continuous with the mental region, and centrally sunken so as to form a round, flat, fleshy pad. This genus is distinct from all other Asian labeonine genera of the Garrina except for one newly described species of Parasinilabeo ( P. longibarbus), Pseudocrossocheilus, and Sinocrossocheilus, in the presence of well-developed maxillary barbels. Hongshuia differs from the above three genera in the lower lip morphology, and further from both Pseudocrossocheilus and Qianlabeo in the number of pharyngeal tooth rows and from Sinocrossocheilus in the colour pattern. Two new species, H. banmo and H. paoli, differ in the distribution density and degree of development of papillae on the rostral fold, depth of indentations on the distal edge of the rostral fold, presence or absence of papillae on the lower lip, size and shape of tubercles on the tip of the snout and anterior portion of the lachrymal, length, position and colour pattern of the dorsal fin, and snout length.

Redescription of Nais inflata Liang (Annelida : Oligochaeta) from China

Nais inflata Liang 1963 is redescribed on the basis of fully mature specimens collected from several localities of the Yangtze River and Yellow River. The observations and redescription resulting from the study of mature specimens supports N. inflata as a valid species. This species is characterized by a thickened body, the ventral crotchets all of the same type with distal tooth usually longer than proximal one, a greater number of dorsal chaetae per bundle, stout dorsal needles with equal minute bifid teeth (<1 mu m), presence of penial chaetae, and prostate glands on vasa deferentia instead of atria. The species is most closely related to N. communis Piguet, 1906 and N. variabilis Piguet, 1906. A table comparing allied species is provided.

Towards a unified description of rocking structures

Numerous studies on the rigid rocking block have generated a wealth of knowledge about rocking behavior. However, evaluation of more complex rocking systems requires the derivation and solution of complicated equations of motion. This paper investigates the possibility of a unified description of several rocking systems through investigation of rocking mechanisms which describe the masonry wall and the masonry arch. Effective rocking parameters are derived for each of these structures, and the similarity of the rocking behavior is discussed. The error of the proposed approximation, which defines the limitations for this approach, is quantified for the example structures considered. Where appropriate, a unified description of rocking would allow the use of rocking spectra, which would be useful to readily predict the response of a wide array of rocking structures.

Linichthys: A new genus of Chinese cyprinid fishes (Teleostei : Cypriniformes)

yLinichthys, new genus, is proposed for Barbodes laticeps Lin and Zhang, 1986. It can be separated from all other genera of Asian Barbinae in having a shallow depression extending along the median portion of the upper lip. Linichthys is superficially very similar to the type species of a monotypic Chinese cyprinid cavefish genus, Typhlobarbus nudiventris, in having an elongate and somewhat compressed body form, a truncate distal margin of the dorsal fin, and a soft and smooth last unbranched dorsal-fin ray, all of them being atypical for most of Asian barbins. The two genera differ in size of the eye and the number of rows of pharyngeal tooth. Although the same body form and/or structure of the dorsal fin are also shared with some species currently placed in other genera of Asian barbins, the recognition of Linichthys is warranted because of their marked differences in other characters. A redescription is also provided for the type species of the monotypic genus, Linichthys laticeps. It is known only from the upper and middle Zhu Jiang basin and the upper Chang Jiang basin in the city of Guiyang, Guizhou Province, South China.

Redescription of Difflugia tuberspinifera Hu, Shen, Gu et Gong, 1997 (Protozoa : Rhizopoda : Arcellinida : Difflugiidae) from China

The freshwater testate amoeba Difflugia tuberspinifera Hu et al. 1997 collected from pond and lake in China, is investigated by light and scanning electron microscopy. This little known taxon is redescribed and its morphology, biometry and ecology are supplied. After carefully comparison with other six similar species including Difflugia bartosi Stepanek, D. corona Wallich, D. corona cashi Deflandre, D. corona tuberculata Vucetich, D. muriformis Gauthier-Lievre et Thomas and Netzelia tuberculata (Wallich) Netzal we believe that the sub-spherical to spherical shell, the mulberry-shaped appearance, the 7-10 apertural tooth-like structures, the short collar and the conical spines numbering from 4 to 8 at the upper equatorial region in D. tuberspinifera set it apart from other species. Besides, statistical analysis indicates that D. tuberspinifera is a size-monomorphic species characterized by a main-size class and a small size range and the shell height is significant correlated with other morphometric characters at p < 0.05 excepting the number of aperture tooth-like structures and the number of spines. Moreover, D. tuberspinifera inhabits not only lotic but also lentic environment.