Supramolecular Approach to Gold Nanoparticle/Triruthenium Cluster Hybrid Materials and Interfaces

A systematic and comprehensive study of the interaction of citrate-stabilized gold nanoparticles with triruthenium cluster complexes of general formula [Ru(3)(CH(3)COO)(6)(L)](+) [L = 4-cyanopyridine (4-CNpy), 4,4`-bipyridine (4,4`-bpy) or 4,4`-bis(pyridyl)ethylene (bpe)] has been carried out. The cluster-nanoparticle interaction in solution and the construction of thin films of the hybrid materials were investigated in detail by electronic and surface plasmon resonance (SPR) spectroscopy, Raman scattering spectroscopy and scanning electron microscopy (SEM). Citrate-stabilized gold nanoparticles readily interacted with [Ru(3)O(CH(3)COO)(6)(L)(3)](+) complexes to generate functionalized nanoparticles that tend to aggregate according to rates and extents that depend on the bond strength defined by the characteristics of the cluster L ligands following the sequence bpe > 4,4`-bpy >> 4-CNpy. The formation of compact thin films of hybrid AuNP/[Ru(3)O(CH(3)COO)(6)(L)(3)](+) derivatives with L = bpe and 4,4`-bpy indicated that the stability/lability of AuNP-cluster bonds as well as their solubility are important parameters that influence the film contruction process. Fluorine-doped tin oxide electrodes modified with thin films of these nanomaterials exhibited similar electrocatalytic activity but much higher sensitivity than a conventional gold electrode in the oxidation of nitrite ion to nitrate depending on the bridging cluster complex, demonstrating the high potential for the development of amperometric sensors.

PtSnCe/C electrocatalysts for ethanol oxidation: DEFC and FTIR ""in-situ"" studies

The ethanol oxidation reaction (EOR) was investigated using PtSnCe/C electrocatalysts in different mass ratios (72:23:5, 68:22:10 and 64:21:15) that were prepared by the polymeric precursor method. Transmission electron microscopy (TEM) showed that the particles ranged in size from approximately 2 to 5 nm. Changes in the net parameters observed for Pt suggest the incorporation of Sn and Ce into the Pt crystalline network with the formation of an alloy between Pt, Sn and/or Ce. Among the PtSnCe catalysts investigated, the 68:22:10 composition showed the highest activity toward ethanol oxidation, and the current time curves obtained in the presence of ethanol in acidic media showed a current density 50% higher than that observed for commercial PtSn/C (E-Tek). During the experiments performed on single direct ethanol fuel cells, the power density for the PtSnCe/C 68:22:10 anode was nearly 40% higher than the one obtained using the commercial catalyst. Data from Fourier transform infrared (FTIR) spectroscopy showed that the observed behavior for ethanol oxidation may be explained in terms of a double mechanism. The presence of Sn and Ce seems to favor CO oxidation, since they produce an oxygen-containing species to oxidize acetaldehyde to acetic acid. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

Electrodeposition and characterization of undoped and nitrogen-doped ZnSe films

Semiconducting films of (n-type) ZnSe and (p-type) nitrogen-doped ZnSe were electrodeposited by a linear-sweep voltammetric technique on to a substrate of fluorine-tin oxide (FM) glass ceramics. The films were characterized by scanning electron microscopy, energy-dispersive X-ray analysis and grazing-incidence X-ray diffraction. The results indicated that the material was deposited uniformly over the substrate, forming clusters when the Zn content of the bath was 0.1 mol L(-1) and a film when it was 0.2 or 0.3 mol L(-1). The effectiveness of doping the films with nitrogen by adding ammonium sulfate to the deposition solution was assessed by measuring the film-electrolyte interface capacitance (C) at various applied potentials (E(ap)) and plotting Mott-Schottky curves (C(-2) vs E(ap)), whose slope sign was used to identify p-type ZnSe. (C) 2009 Elsevier B.V. All rights reserved.

Study of ethanol electro-oxidation in acid environment on Pt(3)Sn/C anode catalysts prepared by a modified polymeric precursor method under controlled synthesis conditions

A carbon-supported binary Pt(3)Sn catalyst has been prepared using a modified polymeric precursor method under controlled synthesis conditions This material was characterized using X-ray diffraction (XRD). and the results indicate that 23% (of a possible 25%) of Sn is alloyed with Pt, forming a dominant Pt(3)Sn phase. Transmission election microscopy (TEM) shows good dispersion of the electrocatalyst and small particle sizes (3 6 nm +/- 1 nm) The polarization curves for a direct ethanol fuel cell using Pt(3)Sn/C as the anode demonstrated Improved performance compared to that of a PtSn/C E-TEK. especially in the intrinsic resistance-controlled and mass transfer regions. This behavior is probably associated with the Pt(3)Sn phase. The maximum power density for the Pt(3)Sn/C electrocatalyst (58 mW cm(-2)) is nearly twice that of a PtSn/C E-TEK electrocatalyst (33 mW cm(-2)) This behavior is attributed to the presence of a mixed Pt(9)Sn and Pt(3)Sn alloy phase in the commercial catalysts (C) 2009 Elsevier B V All rights reserved

Gelatin-based protonic electrolyte for electrochromic windows

Proton-conducting gel polymer electrolytes based on gelatin plasticized with glycerol and containing acetic acid were investigated, characterized, and applied to electrochromic window. For glycerol contents varying from 7% to 48%, the conductivity of the uniform and predominantly amorphous gel electrolyte was found to follow a Vogel-Tamman-Fulcher behavior with the temperature. Typically, for the electrolyte chosen to make 7 x 2 cm(2) electrochromic smart window with the configuration: glass/fluor-doped tin oxide (FTO)/WO(3)/gelatin electrolyte/CeO(2)-TiO(2)/FTO/glass and containing 28% of glycerol, the conductivities were found to be of the order of 5 x 10(-5) S/cm at room temperature and 3.6 x 10(-4) S/cm at 80 A degrees C. The device was characterized by spectroelectrochemical techniques and was tested up to 10,000 cycles showing a fast coloring/bleaching behavior, where the coloring process was achieved in 10 s and the bleaching in 2 s. The transmission variation at the wavelength of 550 nm was about 15%. The cyclic voltammograms showed a very good reversibility of the cathodic/anodic processes, and the charge density was about 3.5 mC/cm(2). The memory tests showed that the transmittance in the colored state increased by 8% in 90 min after removing the potential.

α,ω-Bis(trichlorostannyl)alkanes: unravelling the hydrolysis pathway to organotin-oxo oligomers

New α,ω-bis(trichlorostannyl)alkanes, Cl₃Sn(CH₂)_nSnCl₃ [n = 3-5, 8], have been synthesized via tin-phenyl bond cleavage reactions on α,ω-bis(triphenylstannyl)alkanes, Ph₃Sn(CH₂)_nSnPh₃ [n = 3-5, 8], using either SnCl₄ or concentrated hydrochloric acid. Some key missing links, (H₂O)Cl₃Sn(CH₂)₃SnCl₃(H₂O) (1a) and (H₂O)₂Cl₃Sn(CH₂)₃SnCl₃(H₂O)₂ (6), in the hydrolysis pathway of organotin trichlorides were identified. Crystal structures of the nonassociated di-tin compounds (H₂O)Cl₃Sn(CH₂)₃SnCl₃(H₂O) (1a) and (H₂O)₂Cl₃Sn(CH₂)₃SnCl₃(H₂O)₂ (6, isolated as the 18-crown-6 cocrystal acetonitrile solvate) as well as the polymeric hydrolysis product [H₂O(OH)Cl₂Sn(CH₂)₃SnCl₂(OH)H₂O·₂H2O]_n (7·2H₂O) are reported.

α,ω-Bis(trichlorostannyl)alkanes as Bis(monodentate) lewis acids toward halide ions

The reactions between X₃Sn(CH₂)_nSnX₃ (X = Cl, Br; _n = 1, 3, 4, 8) and halide in solution are described. ¹¹⁹Sn NMR spectroscopy (CD₂Cl₂) indicates formation of five-coordinate dinuclear 1:2 adducts, [X₄Sn(CH₂)_nSnX₄]^2-, with chloride and bromide. A trigonal-bipyramidal geometry has been confirmed in the solid state for the compound having X = Cl and _n = 4. In contrast, fluoride reacts with X₃Sn(CH₂)_nSnX₃ to give six-coordinate tin species, [F₅Sn(CH₂)_nSnF₅].^4- There was no evidence indicating that the tin atoms could act as a bidentate acid.

Hypercoordinated organotin compounds containing sulfur and chlorine. Molcular structures of [(Ph3P)2N]+[S(SnR2Cl)2Cl]- (R=Me, t-Bu)

The reaction of diorganotin sulfides, cyclo-(R₂SnS)_n (R=Me, n-Bu; n=3; R=t-Bu; n=2) with the corresponding diorganotin dichlorides, R₂SnCl₂, provided the tetraorganodistannathianes, (R₂ClSn)₂S (1, R=Me; 2, R=n-Bu; 3, R=t-Bu). ¹H-, ¹³C-, and ¹¹⁹Sn-NMR studies indicate that these compounds are kinetically labile and in equilibrium with the starting materials. Addition of equimolar amounts of [(Ph₃P)₂N]Cl to the reaction mixtures gave the chloride complexes [(Ph₃P)₂N]⁺[S(SnR₂Cl)₂Cl]⁻ (4, R=Me; 5, R=n-Bu; 6, R=t-Bu). Single-crystal X-ray diffraction studies revealed the tin atoms in both 4 and 6 to adopt distorted trigonal bipyramidal configurations with the chlorine atoms occupying the axial positions.

A novel route for the preparation of dimeric tetraorganodistannoxanes

The reaction of polymeric diorganotin oxides, (R₂SnO)_n (R=Me, Et, n-Bu, n-Oct, c-Hex, i-Pr, Ph), with saturated aqueous NH₄X (X=F, Cl, Br, I, OAc) in refluxing 1,4-dioxane afforded in high yields dimeric tetraorganodistannoxanes, [R₂(X)SnOSn(X)R₂]₂, and in a few cases diorganotin dihalides or diacetates, R₂SnX₂. The reported method appears suitable for the synthesis of fluorinated tetraorganodistannoxanes. Identification of [R₂(OH)SnOSn(X)R₂]₂ (R=n-Bu; X=Cl, Br) and [R₂(OH)SnOSn(X)R₂] [R₂(X)SnOSn(X)R₂] suggest a serial substitution mechanism starting from [R₂(OH)SnOSn(OH)R₂]₂. X-ray crystal structure determinations are reported for [Me₂(AcO)SnOSn(OAc)Me₂]₂ (29a), [i-Pr₂(Br)SnOSn(Br)i-Pr₂]₂ (20a), [c-Hex2(F)SnOSn(F)c-Hex₂]₂ (5a) and [c-Hex₂(F)SnOSn(Cl)c-Hex₂]₂ (36), respectively. These show the presence of a central (R₂Sn)₂O₂ core that is connected, via the oxygen atoms, to R₂Sn entities. Acetate (29a) or halides (5a, 20a, 36) complete the coordination about the tin centres.

Extension ladders - synthesis and characterisation of new spacer-bridged tetraorganodistannoxanes

Preliminary results are described on the synthesis and characterization of novel spacer-bridged tetraorganodistannoxanes, {[[R(Cl)Sn]₂(CH₂)₂]O}₄ (n = 5 – 8, 10, 12; R = CH₂SiMe₃) containing particularly long organic spacers. In the solid state, these compounds reveal typical double-ladder structures with eight tin atoms per molecule, whereas in solution a partial and reversible rearrangement takes place to form tetraorganodistannoxanes, {[[R(Cl)Sn]₂(CH₂)_n]O}₂ (n = 5 – 8, 10, 12; R = CH₂SiMe₃), having four tin atoms per molecule.

Synthesis and structure of tris(triphenyltin)benzene-1,3,5-tricarboxylate and its tri-DMSO adduct

The molecular structure of (Ph₃SnO₂C)₃C₆H₃ reveals distorted tetrahedral C₃O geometries for each tin atom. No intermolecular Sn...O associations occur between the molecules so that the trinuclear molecule may be considered monomeric. An increase in coordination number at tin is indicated by ¹¹⁹Sn NMR measurements conducted in d₆-DMSO solution and this has been confirmed by a structure analysis of (DMSO·Ph₃SnO₂C)₃C₆H₃·2 DMSO. In this structure, the tin atom geometries are distorted trigonal bipyramidal, existing within trans-C₃O₂ donor sets. Thus, while is it possible for the tin atoms to increase their coordination numbers in (Ph₃SnO₂C)₃C₆H₃, molecular aggregation to form polymeric arrays is precluded, most likely due to steric constraints.

Synthesis and molecular structure of [n-Bu2(F)SnOSn(F)t-Bu2]2 - an unsymmetrically substituted tetraorganodistannoxane

The dimeric tetraorganodistannoxane [n-Bu₂(F)SnOSn(F)t-Bu₂]₂ (1) was prepared by the reaction of (t-Bu₂SnO)₃ with n-Bu₂SnF₂ and characterized in solution by multinuclear NMR spectroscopy and ESI MS spectrometry and in the solid state by ¹¹⁹Sn MAS NMR spectroscopy and single crystal X-ray diffraction.

Single enatiomer free-radical chemistry - Lewis acid-mediated reductions of racemic halides using chiral non-racemic stannanes

Additions of one to two equivalents of Lewis acids that include magnesium salts to free-radical reduction reactions involving ester functionalized radicals and (1R,2S,5R)-menthyldiphenyltin hydride 4, bis((1R,2S,5R)-menthyl)phenyltin hydride 5, tris((1R,2S,5R)-menthyl)tin hydride 6, bis((1R,2S,5R)-menthyl)-[8-(N,N-dimethylamino)naphthyl]tin hydride 12, bis((1R,2S,5R)-menthyl)-[1-((S)-N,N-dimethylaminoethyl)phenyl]tin hydride 13 or 3α-dimethylstannyl-5α-cholestane 14 result in remarkable enantioselectivities. Examples include (S)-naproxen ethyl ester 16, produced in 74% yield and greater than 99% ee at −78°C from the bromide and 5 in the presence of MgBr₂, and ethyl (R)-N-trifluoroacetyl-_D-phenylglycinate 18, obtained in 78% yield and 99% ee under identical conditions. Kinetic and computational studies provide insight into the origins of these observations.

Hydrolysis of dinuclear spacer-bridged diorganotin(IV) triflates. A novel cationic double ladder with supramolecular association

A series of oligomethylene-bridged diorganotin triflates R(OTf)₂Sn(CH₂)_nSn(OTf)₂R (R = CH₂SiMe₃; n = 3, 4, 8, 10) were synthesized by reaction of triflic acid with the precursor oxides R(O)Sn(CH₂)_nSn(O)R. On the basis of ¹¹⁹Sn NMR (in acetonitrile) the triflates appear to be the simple six-coordinated ionic species [(MeCN)₄(RSn(CH₂)_nSnR)(MeCN)₄]²⁺. These triflates readily undergo hydrolysis to give products, the identity of which depends on the length of the oligomethylene bridge. For n = 3 (5), the solid-state structure shows association of two dimeric units, which results in a tetracationic double ladder. Extensive hydrogen bonding gives rise to a supramolecular association. Solution ¹¹⁹Sn NMR and ES MS suggest some dissociation of 5 into dimers containing four tin atoms and possibly monomers containing two tin atoms. A rudimentary solid-state structure for n = 4 (6) indicates a linear polymer based on dimeric (four tin atoms) units. The structure of 6 also features extensive hydrogen bonding, this time effectively giving rise to alternating layers of cations and anions.