Shoreline erosion due to extreme storms and sea level rise

A summary is presented of research conducted on beach erosion associated with extreme storms and sea level rise. These results were developed by the author and graduate students under sponsorship of the University of Delaware Sea Grant Program. Various shoreline response problems of engineering interest are examined. The basis for the approach is a monotonic equilibrium profile of the form h = Ax2 /3 in which h is water depth at a distance x from the shoreline and A is a scale parameter depending primarily on sediment characteristics and secondarily on wave characteristics. This form is shown to be consistent with uniform wave energy dissipation per unit volume. The dependency of A on sediment size is quantified through laboratory and field data. Quasi-static beach response is examined to represent the effect of sea level rise. Cases considered include natural and seawalled profiles. To represent response to storms of realistic durations, a model is proposed in which the offshore transport is proportional to the "excess" energy dissipation per unit volume. The single rate constant in this model was evaluated based on large scale wave tank tests and confirmed with Hurricane Eloise pre- and post-storm surveys. It is shown that most hurricanes only cause 10% to 25% of the erosion potential associated with the peak storm tide and wave conditions. Additional applications include profile response employing a fairly realistic breaking model in which longshore bars are formed and long-term (500 years) Monte Carlo simulation including the contributions due to sea level rise and random storm occurrences. (PDF has 67 pages.)

SAMUDRA Report, No. 50, August 2008

Report: Rights-based fishing - Flagging rights, realizing responsibilities. Senegal: Artisanal fisheries - A health check. Analysis: Fuel prices - Fishing in times of high prices. Panama: Protected areas - Mother earth, mother sea. Review: Films - A restless, throbbing ballet. Norway: Fuel subsidies - Skimming the cream. India: Coastal Management - Save the coast, save the fishers. Report: Chile Workshop - Common concerns, lasting bonds. Indonesia: Fisheries Legislation - Ring of fire. Report: CBD COP9 - Breaking away from tradition. On Samudra Report At 50 – Supplement. (64 pp.)

U.S. Caribbean fish trap fishery costs and earnings study

Executive Summary: This study describes the socio-economic characteristics of the U.S. Caribbean trap fishery that encompasses the Commonwealth of Puerto Rico and Territory of the U.S. Virgin Islands. In-person interviews were administered to one hundred randomly selected trap fishermen, constituting nearly 25% of the estimated population. The sample was stratified by geographic area and trap tier. The number of traps owned or fished to qualify for a given tier varied by island. In Puerto Rico, tier I consisted of fishermen who had between 1-40 fish traps, tier II was made up of fishermen who possessed between 41 and 100 fish traps, and tier III consisted of fishermen who held in excess of 100 fish traps. In St. Thomas and St. John, tier I was composed of fishermen who held between 1 and 50 fish traps, tier II consisted of fishermen who had between 51-150 fish traps and tier III was made up of fishermen who had in excess of 150 fish traps. Lastly, in St. Croix, tier I was made up of fishermen who had less than 20 fish traps and tier II consisted of fishermen who had 20 or more fish traps. The survey elicited information on household demographics, annual catch and revenue, trap usage, capital investment on vessels and equipment, fixed and variable costs, behavioral response to a hypothetical trap reduction program and the spatial distribution of traps. The study found that 79% of the sampled population was 40 years or older. The typical Crucian trap fisherman was older than their Puerto Rican and St. Thomian and St. Johnian counterparts. Crucian fishermen’s average age was 57 years whereas Puerto Rican fishermen’s average age was 51 years, and St. Thomian and St. Johnian fishermen’s average age was 48 years. As a group, St. Thomian and St. Johnian fishermen had 25 years of fishing experience, and Puerto Rican and Crucian fishermen had 30, and 29 years, respectively. Overall, 90% of the households had at least one dependent. The average number of dependents across islands was even, ranging between 2.8 in the district of St. Thomas and St. John and 3.4 in the district of St. Croix. The percentage utilization of catch for personal or family use was relatively low. Regionally, percentage use of catch for personal or family uses ranged from 2.5% in St. Croix to 3.8% in the St. Thomas and St. John. About 47% of the respondents had a high school degree. The majority of the respondents were highly dependent on commercial fishing for their household income. In St. Croix, commercial fishing made up 83% of the fishermen’s total household income, whereas in St. Thomas and St. John and Puerto Rico it contributed 74% and 68%, respectively. The contribution of fish traps to commercial fishing income ranged from 51% in the lowest trap tier in St. Thomas and St. John to 99% in the highest trap tier in St. Croix. On an island basis, the contribution of fish traps to fishing income was 75% in St. Croix, 61% in St. Thomas and St. John, and 59% in Puerto Rico. The value of fully rigged vessels ranged from $400 to $250,000. Over half of the fleet was worth $10,000 or less. The St. Thomas and St. John fleet reported the highest mean value, averaging $58,518. The Crucian and Puerto Rican fleets were considerably less valuable, averaging $19,831 and $8,652, respectively. The length of the vessels ranged from 14 to 40 feet. Fifty-nine percent of the sampled vessels were at least 23 feet in length. The average length of the St. Thomas and St. John fleet was 28 feet, whereas the fleets based in St. Croix and Puerto Rico averaged 21 feet. The engine’s propulsion ranged from 8 to 400 horsepower (hp). The mean engine power was 208 hp in St. Thomas and St. John, 108 hp in St. Croix, and 77 hp in Puerto Rico. Mechanical trap haulers and depth recorders were the most commonly used on-board equipment. About 55% of the sampled population reported owning mechanical trap haulers. In St. Thomas and St. John, 100% of the respondents had trap haulers compared to 52% in Puerto Rico and 20% in St. Croix. Forty-seven percent of the fishermen surveyed stated having depth recorders. Depth recorders were most common in the St. Thomas and St. John fleet (80%) and least common in the Puerto Rican fleet (37%). The limited presence of emergency position indication radio beacons (EPIRBS) and radar was the norm among the fish trap fleet. Only 8% of the respondents had EPIRBS and only 1% had radar. Interviewees stated that they fished between 1 and 350 fish traps. Puerto Rican respondents fished on average 39 fish traps, in contrast to St. Thomian and St. Johnian and Crucian respondents, who fished 94 and 27 fish traps, respectively. On average, Puerto Rican respondents fished 11 lobster traps, and St. Thomian and St. Johnian respondents fished 46 lobster traps. None of the Crucian respondents fished lobster traps. The number of fish traps built or purchased ranged between 0 and 175, and the number of lobster traps built or bought ranged between 0 and 200. Puerto Rican fishermen on average built or purchased 30 fish traps and 14 lobster traps, and St. Thomian and St. Johnian fishermen built or bought 30 fish traps and 11 lobster traps. Crucian fishermen built or bought 25 fish traps and no lobster traps. As a group, fish trap average life ranged between 1.3 and 5 years, and lobster traps lasted slightly longer, between 1.5 and 6 years. The study found that the chevron or arrowhead style was the most common trap design. Puerto Rican fishermen owned an average of 20 arrowhead traps. St. Thomian and St. Johnian and Crucian fishermen owned an average of 44 and 15 arrowhead fish traps, respectively. The second most popular trap design was the square trap style. Puerto Rican fishermen had an average of 9 square traps, whereas St. Thomian and St. Johnian fishermen had 33 traps and Crucian fishermen had 2 traps. Antillean Z (or S) -traps, rectangular and star traps were also used. Although Z (or S) -traps are considered the most productive trap design, fishermen prefer the smaller-sized arrowhead and square traps because they are easier and less expensive to build, and larger numbers of them can be safely deployed. The cost of a fish trap, complete with rope and buoys, varied significantly due to the wide range of construction materials utilized. On average, arrowhead traps commanded $94 in Puerto Rico, $251 in St. Thomas and St. John, and $119 in St. Croix. The number of trips per week ranged between 1 and 6. However, 72% of the respondents mentioned that they took two trips per week. On average, Puerto Rican fishermen took 2.1 trips per week, St. Thomian and St. Johnian fishermen took 1.4 trips per week, and Crucian fishermen took 2.5 trips per week. Most fishing trips started at dawn and finished early in the afternoon. Over 82% of the trips lasted 8 hours or less. On average, Puerto Rican fishermen hauled 27 fish traps per trip whereas St. Thomian and St. Johnian fishermen and Crucian fishermen hauled 68 and 26 fish traps per trip, respectively. The number of traps per string and soak time varied considerably across islands. In St. Croix, 84% of the respondents had a single trap per line, whereas in St. Thomas and St. John only 10% of the respondents had a single trap per line. Approximately, 43% of Puerto Rican fishermen used a single trap line. St. Thomian and St. Johnian fishermen soaked their traps for 6.9 days while Puerto Rican and Crucian fishermen soaked their traps for 5.7 and 3.6 days, respectively. The heterogeneity of the industry was also evidenced by the various economic surpluses generated. The survey illustrated that higher gross revenues did not necessarily translate into higher net revenues. Our analysis also showed that, on average, vessels in the trap fishery were able to cover their cash outlays, resulting in positive vessel income (i.e., financial profits). In Puerto Rico, annual financial profits ranged from $4,760 in the lowest trap tier to $32,467 in the highest tier, whereas in St. Thomas and St. John annual financial profits ranged from $3,744 in the lowest tier to $13,652 in the highest tier. In St. Croix, annual financial profits ranged between $9,229 and $15,781. The survey also showed that economic profits varied significantly across tiers. Economic profits measure residual income after deducting the remuneration required to keep the various factors of production in their existing employment. In Puerto Rico, annual economic profits ranged from ($9,339) in the lowest trap tier to $ 8,711 in the highest trap tier. In St. Thomas and St. John, annual economic profits ranged from ($7,920) in the highest tier to ($18,486) in the second highest tier. In St. Croix, annual economic profits ranged between ($7,453) to $10,674. The presence of positive financial profits and negative economic profits suggests that higher economic returns could be earned from a societal perspective by redirecting some of these scarce capital and human resources elsewhere in the economy. Furthermore, the presence of negative economic earnings is evidence that the fishery is overcapitalized and that steps need to be taken to ensure the long-run economic viability of the industry. The presence of positive financial returns provides managers with a window of opportunity to adopt policies that will strengthen the biological and economic performance of the fishery while minimizing any adverse impacts on local fishing communities. Finally, the document concludes by detailing how the costs and earnings information could be used to develop economic models that evaluate management proposals. (PDF contains 147 pages)

Environmental judgment in early childhood and its relationship with the understanding of the concept of living beings

The evidence collected concerning the biocentric judgment that young children express when evaluating human actions on the environment leads some scholars to suggest that an essential understanding of the notion of living beings should appear earlier than previously believed. This research project aims to study that assumption. To this end, young children’s choice when they are put in situation of having to compare and choose the most negative option between environmentally harmful actions and the breaking of social conventions are examined. Afterwards, the results are categorized in relation to those obtained from the study of children’s grasp of the distinction between living beings and inanimate entities. The data is analysed according to the individuals’ age and overall, it suggests a lack of relationship between environmental judgment and the understanding of the concept of living beings. The final results are discussed in keeping with recent research in the field of moral development that underscores the role that unconscious emotional processing plays in the individual’s normative judgment.

La estructura y propiedades magnéticos de las nanopartículas de Fe50Ni50 obtenidas mediante el método de explosión eléctrica de hilo

[Es]Actualmente ninguna área científica es ajena a la revolución de la nanociencia; las nanopartículas atraen el interés de muchos investigadores desde el punto de vista de la ciencia fundamental y para sus aplicaciones tecnológicas. Las nanopartículas ofrecen la posibilidad de fabricar sensores que sean capaces de detectar desde un virus hasta concentraciones de substancias patógenas que no pueden ser detectadas por los métodos convencionales. Hoy en día existes 82 tratamientos contra el cáncer basadas en la utilización de nanopartículas y los materiales composite con nanopartículas se utilizan como medio de protección frente la radiación del rango de microondas. En la rama de ciencias ambientales, las nanopartículas metálicas sirven como materiales anticontaminantes. En este trabajo se ha estudiado la estructura y las propiedades magnéticas de las nanopartículas de FeNi preparadas mediante el método de explosión eléctrica de hilo. Con la técnica de Rayos–X(DRX) se ha determinado que las nanopartículas se cristalizan en un sistema cúbico FCC con un parámetro de celda de 3.596 Å, también, se ha obtenido el tamaño de dominio coherente que es de 35 nm. La muestra se ha sometido a un programa de temperatura controlada para seguir la evolución de la estructura cristalina y del tamaño del cristal, tanto en atmósfera oxidante como en vacío. Para el aprendizaje de los microscopios utilizados en este trabajo, se ha asistido al curso “Fundamentos de microscopia electrónica de barrido y microanálisis” impartido por SGIker de la UPV/EHU. Se han empleado los microscopios electrónicos SEM y TEM para obtener imágenes de gran resolución de la muestra y analizar su contenido elemental. Partiendo de las imágenes sacadas por el SEM se ha calculado el valor medio del tamaño de las partículas de la muestra, 58 nm. Mediante el Mastersizer 2000 se ha medido el tamaño de las partículas y/o agregados por método de difracción láser, disgregando la muestra todo lo posible hasta conseguir el tamaño medio que se aproxime al de una sola partícula, 100nm. Por último, para la caracterización magnética se ha servido del VSM que mide el momento magnético de una muestra cuando ésta vibra en presencia de un campo magnético estático, consiguiendo una imanación de saturación de 125 emu/g. Hemos fabricado y caracterizado las nanopartículas magnéticas de hierro-níquel y los resultados obtenidos han sido enviados a un congreso especializado de ciencia de materiales (ISMANAM - 2013, Italia).

Comments on hydrographic and topographic LIDAR acquisition and merging with multibeam sounding data acquired in the Olympic Coast National Marine Sanctuary

In April 2005, a SHOALS 1000T LIDAR system was used as an efficient alternative for safely acquiring data to describe the existing conditions of nearshore bathymetry and the intertidal zone over an approximately 40.7 km2 (11.8 nm2) portion of hazardous coastline within the Olympic Coast National Marine Sanctuary (OCNMS). Data were logged from 1,593 km (860 nm) of track lines in just over 21 hours of flight time. Several islands and offshore rocks were also surveyed, and over 24,000 geo-referenced digital still photos were captured to assist with data cleaning and QA/QC. The 1 kHz bathymetry laser obtained a maximum water depth of 22.2 meters. Floating kelp beds, breaking surf lines and turbid water were all challenges to the survey. Although sea state was favorable for this time of the year, recent heavy rainfall and a persistent low-lying layer of fog reduced acquisition productivity. The existence of a completed VDatum model covering this same geographic region permitted the LIDAR data to be vertically transformed and merged with existing shallow water multibeam data and referenced to the mean lower low water (MLLW) tidal datum. Analysis of a multibeam bathymetry-LIDAR difference surface containing over 44,000 samples indicated surface deviations from –24.3 to 8.48 meters, with a mean difference of –0.967 meters, and standard deviation of 1.762 meters. Errors in data cleaning and false detections due to interference from surf, kelp, and turbidity likely account for the larger surface separations, while the remaining general surface difference trend could partially be attributed to a more dense data set, and shoal-biased cleaning, binning and gridding associated with the multibeam data for maintaining conservative least depths important for charting dangers to navigation. (PDF contains 27 pages.)

BertsoBot: lehen urratsak

[EU]Hizkuntzaren prozesamenduko teknikak erabilita, poesia-sorkuntza automatikoan lehen urratsak eman dira. Hau erdiesteko, corpusen prozesamenduan oinarritutako bilaketak erabili dira, bai bilaketa arruntak eta baita bilaketa semantiko aurreratuak ere, horretarako IXA taldean garatutako tresna ezberdinak erabiliaz. Hizkuntza poetikoko testuek, gramatikaltasun eta metrika hertsitik haratago, semantika eta pragmatika barneratuta dituzte. Lan honetan semantikaren auziari heldu zaio nagusiki.

Critical current anisotropy in high temperature superconductors

After nearly 15 years of research effort, High Temperature Superconductors (HTS) are finding a wide range of practical applications. A clear understanding of the factors controlling the current carrying capacity of these materials is a prerequisite to their successful technological development. The critical current density (Jc) in HTS is directly dependent on the structure and pinning of the Flux Line Lattice (FLL) in these materials. This thesis presents an investigation of the Jc anisotropy in HTS. The use of thin films grown on off c-axis (vicinal) substrates allowed the effect of current directions outside the cuprate planes to be studied. With this experimental geometry Berghuis, et al. (Phys. Rev. Lett. 79, 12, pg. 2332) observed a striking flux channelling effect in vicinal YBa2Cu3O7-δ (YBCO) films. By confirming, and extending, this observation, it is demonstrated that this is an intrinsic effect. The results obtained, appear to fit well with the predictions of a field angle dependent cross-over from a three dimensional rectilinear FLL to a kinked lattice of strings and pancakes. The pinning force density for movement of strings inside the cuprate planes is considerably less than that on vortex pancake elements. When the FLL is entirely string-like this reduced pinning leads to the observed channelling minima. It is observed that anti-phase boundaries enhance the Jc in vicinal YBCO films by strongly pinning vortex strings. The effect on the FLL structure cross-over of increasing anisotropy has been elucidated using de-oxygenated vicinal YBCO films. Intriguingly, the counter intuitive prediction that the range of applied field angle for which the kinked lattice is fully developed reduces with increasing anisotropy, appears to be confirmed. Although vortex channelling cannot be observed in c-axis YBCO films, the pinning force density for vortex string channelling has been extracted by observing string dragging. By studying the effect of rotating the applied field at a constant angle to the cuprate planes, it is possible to observe the cross-over into the string pancake regime in c-axis films. In the 3D region, the observed behaviour is well explained by the anisotropic Ginzburg-Landau model. Measurements were also made on thin films of the much more anisotropic Bi 2Sr2CaCu2O8+x material, grown on vicinal substrates. The absence of any flux channelling effect and clear adherence to the expected Kes-Law behaviour in the observed Jc characteristics does not provide evidence for the existence of the predicted ‘crossing lattice’ in Bi 2Sr2CaCu2O8+x .

Formation Mechanism Of Lamellar Chips During Machining Of Bulk Metallic Glass

The uniqThe unique lamellar chips formed in turning–machining of a Vit 1 bulk metallic glass (BMG) are found to be due to repeated shearband formation in the primary shear zone (PSZ). A coupled thermomechanical orthogonal cutting model, taking into account force, free volume and energy balance in the PSZ, is developed to quantitatively characterize lamellar chip formation. Its onset criterion is revealed through a linear perturbation analysis. Lamellar chip formation is understood as a self-sustained limit-cycle phenomenon: there is autonomous feedback in stress, free volume and temperature in the PSZ. The underlying mechanism is the symmetry breaking of free volume flow and source, rather than thermal instability. These results are fundamentally useful for machining BMGs and even for understanding the physical nature of inhomogeneous flow in BMGs.ue lamellar chips formed in turning–machining of a Vit 1 bulk metallic glass (BMG) are found to be due to repeated shearband.

Effects of geometric shape on the hydrodynamics of a self-propelled flapping foil

The hydrodynamics of a free flapping foil is studied numerically. The foil undergoes a forced vertical oscillation and is free to move horizontally. The effect of chord-thickness ratio is investigated by varying this parameter while fixing other ones such as the Reynolds number, the density ratio, and the flapping amplitude. Three different flow regimes have been identified when we increase the chord-thickness ratio, i.e., left-right symmetry, back-and-forth chaotic motion, and unidirectional motion with staggered vortex street. It is observed that the chord-thickness ratio can affect the symmetry-breaking bifurcation, the arrangement of vortices in the wake, and the terminal velocity of the foil. The similarity in the symmetry-breaking bifurcation of the present problem to that of a flapping body under constraint is discussed. A comparison between the dynamic behaviors of an elliptic foil and a rectangular foil at various chord-thickness ratios is also presented.

The elasto-damage theory of the components assembling model

The potential energy in materials is well approximated by pair functional which is composed of pair potentials and embedding energy. During calculating material potential energy, the orientational component and the volumetric component are derived respectively from pair potentials and embedding energy. The sum of energy of all these two kinds of components is the material potential. No matter how microstructures change, damage or fracture, at the most level, they are all the changing and breaking atomic bonds. As an abstract of atomic bonds, these components change their stiffness during damaging. Material constitutive equations have been formulated by means of assembling all components' response functions. This material model is called the component assembling model. Theoretical analysis and numerical computing indicate that the proposed model has the capacity of reproducing some results satisfactorily, with the advantages of great conceptual simplicity, physical explicitness, and intrinsic induced anisotropy, etc.

Stabilizing to disruptive transition of focal adhesion response to mechanical forces

Strong mechanical forces can, obviously, disrupt cell-cell and cell-matrix adhesions, e.g., cyclic uniaxial stretch induces instability of cell adhesion, which then causes the reorientation of cells away from the stretching direction. However, recent experiments also demonstrated the existence of force dependent adhesion growth (rather than dissociation). To provide a quantitative explanation for the two seemingly contradictory phenomena, a microscopic model that includes both integrin-integrin interaction and integrin-ligand interaction is developed at molecular level by treating the focal adhesion as an adhesion cluster. The integrin clustering dynamics and integrin-ligand binding dynamics are then simulated within one unified theoretical frame with Monte Carlo simulation. We find that the focal adhesion will grow when the traction force is higher than a relative small threshold value, and the growth is dominated by the reduction of local chemical potential energy by the traction force. In contrast, the focal adhesion will rupture when the traction force exceeds a second threshold value, and the rupture is dominated by the breaking of integrin-ligand bonds. Consistent with the experiments, these results suggest a force map for various responses of cell adhesion to different scales of mechanical force. PMID: 20542514

Investment prospects in the production of the common carp (Cyprinus carpio) fingerlings in freshwater ponds

Since the introduction of Common carp Cyprinus carpio in Oyo State (Nigeria) from Israel in 1964, various local breeding methods have been employed in carp rearing to improve the survival rate at all stages of development during breeding. The physico-chemical parameters of the ponds which were simultaneously investigated for carp rearing in this study includes temperature (t), dissolved oxygen (DO) and hydrogen-ion concentration (pH). However, high rates of water displacement in the breeding ponds were unfavourable to the development of zooplankton which play important role in the food web of C. carpio. The survival rates of 15.88-69.50% and 19.60-33.83% obtained for the egg-hatchling and hatchling-fingerling stages respectively were encouraging. A breeding performance of this magnitude was found to be viable, breaking even in the fourth year. However, an increase in size of this trial project would be more profitable and increase fingerling supply as well as provide employment opportunities. This study thereby provides some baseline information on some local techniques and progress in the propagation of C. carpio and scope for further improvement

The use and economic benefits of fibres from sisal hemp (Agave sisalana) leaves as supporting ropes for fishing gear

Sisal hemp (Agave sisalana) leaves were harvested and processed using the beating and decomposition methods. The fibres obtained were washed, dried and finally spurned in to cordage of about 4mm diameter 39 pieces of ropes, each measuring 2 meters were altogether spurned. 30 pieces of these ropes were immersed in water for a period of 24 weeks, 6 were placed in a shaded and airily place and 3 were used for the head and footling of gillnet, sinker line of cast net and the main line of long line. Every other week, the ropes in water and air were tested for its breaking strength using an improved 50kg spring balance. At the end of the experiment, it was found the immersed ropes maintained a tensile strength of over 50kg/F for the first 18 weeks, thereafter; there was a gradual weekly reduction in the strength until the 23rd week when the tensile strength was less than 1kg/F. The cost benefit analysis showed that about 5,3146 tons processed fibers could be obtained fro 1ha. capable of being spenced in to 528300m of 4mm diameter cordage. This paper finally recommended the growth of sisal hemp plants by fisher folks so that there will be constant stock for intermittent harvesting for rope spurning

Deviation from standard inflationary cosmology and the problems in ekpyrosis

There are two competing models of our universe right now. One is Big Bang with inflation cosmology. The other is the cyclic model with ekpyrotic phase in each cycle. This paper is divided into two main parts according to these two models. In the first part, we quantify the potentially observable effects of a small violation of translational invariance during inflation, as characterized by the presence of a preferred point, line, or plane. We explore the imprint such a violation would leave on the cosmic microwave background anisotropy, and provide explicit formulas for the expected amplitudes $\langle a_{lm}a_{l'm'}^*\rangle$ of the spherical-harmonic coefficients. We then provide a model and study the two-point correlation of a massless scalar (the inflaton) when the stress tensor contains the energy density from an infinitely long straight cosmic string in addition to a cosmological constant. Finally, we discuss if inflation can reconcile with the Liouville's theorem as far as the fine-tuning problem is concerned. In the second part, we find several problems in the cyclic/ekpyrotic cosmology. First of all, quantum to classical transition would not happen during an ekpyrotic phase even for superhorizon modes, and therefore the fluctuations cannot be interpreted as classical. This implies the prediction of scale-free power spectrum in ekpyrotic/cyclic universe model requires more inspection. Secondly, we find that the usual mechanism to solve fine-tuning problems is not compatible with eternal universe which contains infinitely many cycles in both direction of time. Therefore, all fine-tuning problems including the flatness problem still asks for an explanation in any generic cyclic models.