A dose-response curve for biodosimetry from a 6 MV electron linear accelerator

Biological dosimetry (biodosimetry) is based on the investigation of radiation-induced biological effects (biomarkers), mainly dicentric chromosomes, in order to correlate them with radiation dose. To interpret the dicentric score in terms of absorbed dose, a calibration curve is needed. Each curve should be constructed with respect to basic physical parameters, such as the type of ionizing radiation characterized by low or high linear energy transfer (LET) and dose rate. This study was designed to obtain dose calibration curves by scoring of dicentric chromosomes in peripheral blood lymphocytes irradiated in vitro with a 6 MV electron linear accelerator (Mevatron M, Siemens, USA). Two software programs, CABAS (Chromosomal Aberration Calculation Software) and Dose Estimate, were used to generate the curve. The two software programs are discussed; the results obtained were compared with each other and with other published low LET radiation curves. Both software programs resulted in identical linear and quadratic terms for the curve presented here, which was in good agreement with published curves for similar radiation quality and dose rates.

The transforming network of a foreign company operating in Mongolia. Case: A Finnish firm in Mongolia

In the globalising business environment ever fewer market areas remain unknown. Mongolia is yet only considered as an isolated strip between two power states. The purpose of this study is to put Mongolia on the map of academic business research. This is done by describing the transforming network of a foreign company operating in Mongolia. The objective of the study is approached through a case study, which presents the transformation of a Finnish company operating in Mongolia. This study aims at providing understanding on how the foreign case company observes the transformations of its network. The transformation within the case company is reflected to the transformations that occur in the Mongolian business environment. This study was conducted through a qualitative, intrinsic case study approach. The empirical data was gathered by using the method of network pictures. The network pictures were completed with the assistance of themed interviews. In order to be able to analyse the transformation within a network, three different time periods were observed: the past period around 2000, the present around 2014, and the estimated future around 2020. The data was collected from four executives positioned either in Finland, Russia or Mongolia. The respondents have a long experience within the case company, they hold managerial position, and therefore were able to offer valuable data for this study. The analytical framework used to analyse the collected data was built on the industrial network model, the ARA (actors-resources-activities)-model. The study shows that the changing business environment of Mongolia was utilised by the case company. In order to better meet the transforming customer wishes, the case company transformed from being a retailer to being a manufacturer. The case company was able to become a pioneer in the market. Thus, the case company has undergone similar kind of rapid transformation as the economy of Mongolia in entirety. This study shows that the general nature of the ARA-model makes it usable for new research contexts. The initial ARA-model offers a way to identify the dimensions of a network and a mean to understand these dimensions. The ARA-model can be applied to different contexts and to all time dimensions, past, present and future. The managerial recommendations offered in this study are directed towards the managers that plan to start operations in Mongolia. While this study is the first of its kind, it offers a good starting point for the future research on the change of Mongolian business networks. Valuable information could, for example, be obtained from a comparative study between the case company of this study and a multinational mining company operating in Mongolia.

Influence of spray drying operating conditions on microencapsulated rosemary essential oil properties

Spray drying is an important method used by the food industry in the production of microencapsulated flavors to improve handling and dispersion properties. The objective of this study was to evaluate the influence of the process conditions on the properties of rosemary essential oil microencapsulated by spray drying using gum Arabic as encapsulant. The effects of the wall material concentration (10-30%), inlet air temperature (135-195 ºC), and feed flow rate (0.5-1.0 L.h-1) on the moisture content, hygroscopicity, wettability, solubility, bulk and tapped densities, particle density, flowability, and cohesiveness were evaluated using a 2³ central composite rotational experimental design. Moisture content, hygroscopicity and wettability were significantly affected by the three factors analyzed. Bulk density was positively influenced by the wall material concentration and negatively by the inlet air temperature. Particle density was influenced by the wall material concentration and the inlet air temperature variables, both in a negative manner. As for the solubility, tapped density, flowability, and cohesiveness, the models did not fit the data well. The results indicated that moderate wall material concentration (24%), low inlet air temperature (135 ºC), and moderate feed flow rate (0.7 L.h-1) are the best spray drying conditions.

Foreign exchange exposure management in a fuel procurement company operating in the commodity markets

Fluctuating commodity prices, foreign exchange rates and interest rates are causing changes in cash flows, market value and the companies’ profit. Most of the commodities are quoted in US dollar. Companies with non-dollar accounting face a double risk in the form of the commodity price risk and foreign exchange risk. The objective of this Master’s thesis is to find out how companies under commodity should manage foreign exchange exposure. The theoretical literature is based on foreign exchange risk, commodity risk and foreign exchange exposure management. The empirical research is done by using constructive modelling of a case company in the oil industry. The exposure is model with foreign exchange net cash flow and net working capital. First, the factors affecting foreign exchange exposure in case company are analyzed, then a model of foreign exchange exposure is created. Finally, the models are compared and the most suitable method is defined. According to the literature, foreign exchange exposure is the foreign exchange net cash flow. However, the results of the study show that foreign exchange risk can be managed also with net working capital. When the purchases, sales and storage are under foreign exchange risk, the best way to manage foreign exchange exposure is with combined net cash flow and net working capital method. The foreign exchange risk policy of the company defines the appropriate way to manage foreign exchange risk.

The role of nuclear and other conventional power plants in the flexible energy system

This thesis reviews the role of nuclear and conventional power plants in the future energy system. The review is done by utilizing freely accesible publications in addition to generating load duration and ramping curves for Nordic energy system. As the aim of the future energy system is to reduce GHG-emissions and avoid further global warming, the need for flexible power generation increases with the increased share of intermittent renewables. The goal of this thesis is to offer extensive understanding of possibilities and restrictions that nuclear power and conventional power plants have regarding flexible and sustainable generation. As a conclusion, nuclear power is the only technology that is able to provide large scale GHG-free power output variations with good ramping values. Most of the currently operating plants are able to take part in load following as the requirement to do so is already required to be included in the plant design. Load duration and ramping curves produced prove that nuclear power is able to cover most of the annual generation variation and ramping needs in the Nordic energy system. From the conventional power generation methods, only biomass combustion can be considered GHG-free because biomass is considered carbon neutral. CFB combusted biomass has good load follow capabilities in good ramping and turndown ratios. All the other conventional power generation technologies generate GHG-emissions and therefore the use of these technologies should be reduced.

Erikoistilanteiden huomiointi päivittäistavarakaupan myymälätäydennyksessä

Päivittäistavarakauppa toimialana vaatii hektisyytensä, volyymien suurten vaihtelujen ja tuotteiden ominaispiirteiden takia nopeaa reagointikykyä toimitusketjun sopeuttamisessa. Tällöin pienikin tarkkuuden parantaminen myyntiennusteessa voi aiheuttaa merkittäviä positiivisia kerrannaisvaikutuksia koko ketjussa. Tässä diplomityössä tutkittiin kahta teemaa: Säätilan ja vähittäismyynnin välistä korrelaatiota, sekä tuotteen kampanjassa olon aiheuttamaa kannibalisointivaikutusta muiden tuotteiden menekkiin. Tutkimus toteutettiin työn tilaajan kannalta merkittäväksi mielletyillä tavararyhmillä historialliseen myynti –, sää- ja kampanjadataan perustuen. Tutkimuksen tuloksena todettiin lämpötilan olevan yksittäinen merkittävin tuotteiden menekkiin vaikuttava sääparametri. Kampanjan aiheuttaman myynnin kannibalisointivaikutuksen havaittiin olevan merkittävintä saman tuotesegmentin sisällä, erityisesti lyhyissä kampanjoissa. Työssä luotiin toimintamallit molempiin tutkittuihin teemoihin ennusteperusteisen tarvesuunnittelujärjestelmän ennustetarkkuuden parantamisen työkaluiksi.

Internal Changes in International New Ventures During Initial Internationalization: Finnish SMEs Operating in Dynamic High-tech Industries

The purpose of this qualitative research is to study how international new ventures change internally during initial internationalization. Based on the analysis of seven INV firms, a framework illustrating this change process, will be developed. This research will also develop earlier theories, and create a solid combination of existing theories to explain the phenomenon. INV firms internationalize more rapidly and aggressively than traditional MNEs. At the same, external and internal drivers cause changes in INVs culture, resources, capabilities, strategic management, and output decisions inside the company. Organizational learning and resource acquisition through international business networks explain how INVs are able to cope with the dynamic high-technology industry and be able to adapt. Internationalization of INVs proceeds through several phases, which may be gone through rapidly due to the network effects and INVs’ special characteristics. The results of this research revealed that INVs internal change process proceeds through four phases; pre-incorporation phase, product development phase, internationalization and growth phase, and maturation phase. INVs culture, resources, capabilities, strategic management, and outputs change significantly during initial internationalization, and INVs develop from small start-ups into fully established companies.

Co-creating Value For Smart Phone Operating Systems Via Virtual Discussion Forums

In the traditional way, value is created by manufacturer or producer of a product without engaging the customers. So, traditionally value creation is a monopoly in the part of a manufacturer. After gathering all the raw materials the manufacturers are inserting value to a product. And the inserted value is recognized in the time of consuming the product. In the modern time though there is traditional way of value creation but with the increase of more educated, smart, and technically sound customers the idea of value creation has changed. Now, customers are also contributing in value creation as value co-creator even before the product is consumed. This scenario has been encountered in the thesis with the main purpose of how value is cocreated in smart phone operating systems. The purpose is further divided into the following supobjectives: o What is value co-creation in smart phone operating systems? o Who participates in value co-creation in smart phone operating systems? o What are the procedures that are involved in value co-creation in smart phone operating systems? The research was conducted as a qualitative desk study by observing two of the leading smart phone operating system providers. Data has been collected from the official discussion forum of both the operating system providers. Other general concepts relating to the purpose of the study has been encountered through literature review. The research findings reveal that customers and companies both together co-create value of anticipated level when they communicate and interact with each other. However, most of the time customer to customer interactions, dialogues and discussions that come out in the core conversation help the value co-creation. The value co-creation framework sets up the customer at the main focus of value creation theory. By nullifying the inherited notion that companies only create value within its boundary and provide it to their customers in exchange of currencies. Rationally, it has been commenced that the firms are merely compromising value propositions to its customers. But the value has been co-created in a point where offerings are combined and interacted with customers’ capabilities, knowledge, resources and perceptions. This new perspective has radically altered the prospect of firms towards its customers. Typically customers are now taking part in value cocreation as a crucial member.

Evaluation of the Efficiency of Line-Start Permanent-Magnet Machines as a Function of the Operating Temperature

The standard squirrel-cage induction machine has nearly reached its maximum efficiency. In order to further increase the energy efficiency of electrical machines, the use of permanent magnets in combination with the robust design and the line start capability of the induction machine is extensively investigated. Many experimental designs have been suggested in literature, but recently, these line-start permanent-magnet machines (LSPMMs) have become off-the-shelf products available in a power range up to 7.5 kW. The permanent magnet flux density is a function of the operating temperature. Consequently, the temperature will affect almost every electrical quantity of the machine, including current, torque, and efficiency. In this paper, the efficiency of an off-the-shelf 4-kW three-phase LSPMM is evaluated as a function of the temperature by both finite-element modeling and by practical measurements. In order to obtain stator, rotor, and permanent magnet temperatures, lumped thermal modeling is used.

A study of self-directed learning at an Ontario college of applied arts and technology

Ontario Colleges of Applied Arts and Technology (CAATs) are currently in the process of restructuring to ensure quality, accountability, and accessibility of college education. References to learner involvement and self-directed learning are prevalent. "Alternative delivery" and "paradigm shift" are current buzzwords within the Ontario CAAT system as an environment is created supportive of change. Instability of funding has also dictated a need for change. Therefore, a focus has become quality of learning with less demand on public resources. This qualitative case study was conducted at an Ontario CAAT to gather descriptive, perceptual data from post-secondary community college educators who were identified as supportive of self-directed learning and from post-secondary, traditional-aged college students who were perceived by their educators to be selfdirected learners. This college was selected because of initiatives to modify its academic paradigm to encourage what was reputed in the Ontario CAAT system to be self-directed learning. The purpose of this study was to investigate how postsecondary, traditional-aged college students and their educators perceive self-directed learning as part of the teaching-learning experience within a community college setting. Educator participants of the study were selected based on the results of a teaching and learning survey intended to identify educators supportive of self-directed learning. A total of 317 surveys were distributed to every full-time educator at the sample college; 192 completed surveys were returned for a return rate of 61 %. Of these, 8% indicated instructional beliefs and values supportive of self-directed learning. A purposive sample of six educators was selected using a maximulp variation sampling strategy. A network selection sampling strategy was used to select a purposive sample of seven post-secondary students who were identified by the sample educators as selfdirected learners. The results of the study show that students and educators have similar perspectives and operating definitions of self-directed learning and all participants believe they either practice or facilitate self-directed learning. However, their perspectives and practices are not consistent with the literature which emphasizes learner autonomy or control in course structure and content. A central characteristic of the participants represented in this study is the service-oriented professions with which each is associated. Experientiallearning opportunities were highly valued for the options provided in increasing learner independence and competencies in reflective practice. Although there were discrepancies between espoused theory and theory in practice in terms of course structure, the process of self-directed learning was being practiced and supported outside the classroom structure in clinical settings, labs and related experiences.

Niagara alternative food projects : networks, discourses and nature /

This thesis undertakes an exploration of the nature of alternative food projects in Niagara. A review of various theoretical approaches to the study of food and agriculture, suggests that actor-network theory offers the most useful lens through which to understand these projects. In particular, actor-network theory facilitates non-dualistic theorisations of power and scale and a commitment to the inclusion of non-humans in the 'social' sciences. The research is based on 19 in-depth interviews with actors involved in various urban and rural projects including community supported agriculture, community gardens, chefs using local seasonal food, a winery that grows organically, the good food box, a value-added small business, and organic producers. The analysis consists of four themes. The first analytical section pays special attention to the prominence of agri-tourism in Niagara, and examines the ways in which the projects in the sample interact with agri-tourist networks. In the second section the discussion focuses on the discourses and practices of resistance among Niagara alternative food actors. The participants' interviews suggest there are more discourses of resistance toward agri-tourist than toward dominant food networks. The third section questions commodity chain theorisations of alternative food projects. In particular, this section shows how the inclusion of non-human actors in an analysis confounds conceptualisations of 'short' and 'local' chains. The final analytical section assesses relations of power in Niagara alternative food projects. Three important conclusions arise from this research. First, Niagara alternative food projects cannot be conceptualised as operating at the 'local' scale. Broadening the scope of analysis to include non-human actors, it becomes apparent that these projects actually draw on a variety of extra-local actors. They are at once local and global. Second, the projects in this sample are simultaneously part of alternative, dominant and agri-tourist networks. While Niagara alternative food projects do perform many of the roles characteristic of alternative food systems, they are also involved in practices of development, business, and class distinction. Thus, alternative food networks should not be understood as separate from and in direct opposition to dominant food networks. Despite the second conclusion, this research determines that Niagara alternative food projects have made significant strides in the reworking of power. The projects represented in this thesis do engage in resistant practices and are associated with increased levels ofjustice.

Forecasting the Yield Curve of Government Bonds: A Comparative Study

For the past 20 years, researchers have applied the Kalman filter to the modeling and forecasting the term structure of interest rates. Despite its impressive performance in in-sample fitting yield curves, little research has focused on the out-of-sample forecast of yield curves using the Kalman filter. The goal of this thesis is to develop a unified dynamic model based on Diebold and Li (2006) and Nelson and Siegel’s (1987) three-factor model, and estimate this dynamic model using the Kalman filter. We compare both in-sample and out-of-sample performance of our dynamic methods with various other models in the literature. We find that our dynamic model dominates existing models in medium- and long-horizon yield curve predictions. However, the dynamic model should be used with caution when forecasting short maturity yields