Performance Evaluation and Calibration of Machine Vision Measurement

This thesis presents the calibration and comparison of two systems, a machine vision system that uses 3 channel RGB images and a line scanning spectral system. Calibration. is the process of checking and adjusting the accuracy of a measuring instrument by comparing it with standards. For the RGB system self-calibrating methods for finding various parameters of the imaging device were developed. Color calibration was done and the colors produced by the system were compared to the known colors values of the target. Software drivers for the Sony Robot were also developed and a mechanical part to connect a camera to the robot was also designed. For the line scanning spectral system, methods for the calibrating the alignment of the system and the measurement of the dimensions of the line scanned by the system were developed. Color calibration of the spectral system is also presented.

Effects of punishment in a mobile population playing the prisoner’s dilemma game

We deal with a system of prisoner’s dilemma players undergoing continuous motion in a two-dimensional plane. In contrast to previous work, we introduce altruistic punishment after the game. We find punishing only a few of the cooperator-defector interactions is enough to lead the system to a cooperative state in environments where otherwise defection would take over the population. This happens even with soft nonsocial punishment (where both cooperators and defectors punish other players, a behavior observed in many human populations). For high enough mobilities or temptations to defect, low rates of social punishment can no longer avoid the breakdown of cooperation

Measuring Customer Experience in Mobile Internet

Problems in the mobile services are complex where the lack of the user analysis is not the modest issue. User centered design has increasingly become as a basis for the design of mobile services. The concept of user centered design gives end-user extensive attention at each stage of the design process. Mobile service providers want to offer experiences for users and clearly the users look for services that can provide pleasant experiences. In this thesis, the elements of user experience in mobile internet were studied as well as user experience measuring methods were researched. This study was looking for user experience measuring metrics and methods to specify new factors to measure user experience. During this thesis research project an application called CEM4Mobile was designed and implemented. CEM4Mobile is an application for observing and analysing user experience based on the user activity and behaviour. As a result of this thesis, a collection of user experience elements and measuring metrics were found. The elements and metrics were designed and implemented to CEM4Mobile product, which measures user experience. It was found out that the user experience measuring methods were based on interaction between two people but CEM4Mobile makes user observation programmatic.

Prevalence of Problematic Mobile Phone Use in British Adolescents

The problematic use of mobile phones among adolescents has not been widely studied. There are very few instruments for assessing potential technological addiction to mobile phones, or for categorizing different types of users or uses. The most widely used scale is the Mobile Phone Problem Use Scale (MPPUS), which is used to study adult populations, and has been applied in various forms in international contexts. The aims of this study were to adapt the Spanish version of this scale (MPPUSA) to British adolescents, and then to estimate the prevalence of possible problematic users. A questionnaire was administered to a sample of 1,529 secondary school pupils aged between 11 and 18 years, with 1,026 completed questionnaires being collected. The analysis showed that the factor and construct validity and reliability were comparable to those obtained in previous studies. The prevalence of problematic users among the students was 10%, and the typical problematic user tended to be an adolescent between 11 and 14 years old, studying in a public school, who considered themselves to be an expert user of this technology, who made extensive use of his/her mobile phone, and who attributed the same problem of use among their peers. These users presented notable scores in all the symptoms covered by the scale used to assess problematic use. In conclusion, the adaptation of the MPPUSA as a screening scale for British adolescents presents good sensitivity and specificity for detecting the main addictive symptoms proposed in this validated version.

Adaptación española del "Mobile Phone Problematic Use Scale" para población adolescente

El uso problemático del teléfono móvil es un fenómeno emergente en nuestra sociedad, que parece afectar especialmente a la población adolescente. El conocimiento acerca del uso problemático de esta tecnología resulta necesario, dado que puede desarrollarse un patrón comportamental con características adictivas. Apenas existen escalas que midan el posible uso problemático del móvil y ninguna adaptada exclusivamente a población adolescente española. La escala más utilizada internacionalmente es la Mobile Phone Problematic Use Scale (MPPUS). El objetivo de este estudio es adaptar el MPPUS a la población adolescente española. Se administró la versión española del cuestionario a una muestra de 1132 de 12 a 18 años. La fiabilidad y la validez factorial eran comparables a las obtenidas en población adulta, por lo que la medida del uso problemático del móvil en los adolescentes españoles es unidimensional. Se detectó una prevalencia del 14.8% de usuarios problemáticos.

Mobile Communication 2012 : Experiències i recerques sobre comunicació mòbil

La comunicació mòbil és un dels temes de més actualitat en diferents fòrums, des de diferents perspectives. Espanya juga un paper important per les dinàmiques i l’evolució del seu mercat. En aquest sentit, el nostre país ofereix un interès específic per l'amplitud del seu parc de dispositius 3G (el segon d'Europa, després d'Itàlia) i per la intensitat del desenvolupament de xarxes socials mòbils, a més de per la creixent implicació d'empreses en la producció i distribució de continguts mòbils. Com va passar amb Internet, es tracta d’un procés d'innovació pel qual els formats de contingut, les pràctiques de consum i els models de negoci característics de la televisió i la xarxa, per exemple, s'adapten, primer, al nou mitjà, per a després desenvolupar formes i models específics que aprofiten les potencialitats de personalització, geolocalització i conectivitat ubiqua.

Consultoria del procés de logística interna del laboratori d'anàlisis clíniques a l'Hospital General de Vic

Com a resultat de les politiques i estratègies de col·laboració entre la universitat de Vic i de l’hospital i de la voluntat de realitzar activitats formatives conjuntes , s’estableix un línia de treball orientada a l’estudi i anàlisi de la situació logística interna actual del laboratori d’anàlisis clíniques de l’Hospital General de Vic. El treball es centra en el procés intern del laboratori i l’abast de l’estudi es troba limitat a les àrees especifiques d’hematologia i coagulació i bioquí… [+]mica. D’aquestes dues àrees el treball realitza un estudi exhaustiu del seu procés intern, identifica les seves activitats i la seva metodologia de treball amb l’objectiu d’elaborar el Value Stream Map de cadascuna de les àrees. Les àrees de Microbiologia, Banc de Sang i Urgències resten fora d’aquest estudi exhaustiu tot i que són presents en el treball per la inevitable interacció que tenen en la globalitat del procés. El treball es centra bàsicament en els processos automatitzats tot i que els processos que es duen a terme en el laboratori són tant automatitzats com manuals. També es limita al sistema productiu intern del laboratori tot i la interacció que té aquest sistema intern amb altres centres productius del sistema com ara són els centres d’atenció primària, els diversos hospitals i centres d’atenció sociosanitària. El laboratori es troba immers en el moment de l’elaboració d’aquest treball en un situació de canvi i millora del seus processos interns que consisteixen principalment en la substitució de part la maquinària actual que obliguen a la definició d’un nou layout i d’una nova distribució de la producció a cada màquina. A nivell extern també s’estan produint millores en el sistema informàtic de gestió que afecten a part del seu procés. L’objectiu del treball és donar visibilitat total al procés de logística interna actual del laboratori, identificant clarament com són i quina seqüència tenen els processos logístics interns i els mètodes de treball actuals, tant de recursos màquina com recursos persona, per poder identificar sota una perspectiva de generació de valor, aquells punts concrets de la logística interna que poden ser millorats en quant a eficiència i productivitat amb l’objectiu que un cop identificats es puguin emprendre accions i/o projectes de millora. El treball finalitza amb un anàlisis final del procés logística interna des d’una òptica Lean. Per fer-ho, identifica aquelles activitats que no aporten valor al procés o MUDA i les classifica en set categories i es realitzen diverses propostes de millora com són la implantació d’un flux continu , anivellat i basat en un concepte pull , identifica activitats que poden ser estandarditzades i/o simplificades i proposa modificacions en les infraestructures físiques per donar major visibilitat al procés. L’aspecte humà del procés es planteja des d’un punt de vist de metodologia, formació, comunicació i aplicació de les 5S.

Machine Learning and Clinical Text. Supporting Health Information Flow

Fluent health information flow is critical for clinical decision-making. However, a considerable part of this information is free-form text and inabilities to utilize it create risks to patient safety and cost-­effective hospital administration. Methods for automated processing of clinical text are emerging. The aim in this doctoral dissertation is to study machine learning and clinical text in order to support health information flow.First, by analyzing the content of authentic patient records, the aim is to specify clinical needs in order to guide the development of machine learning applications.The contributions are a model of the ideal information flow,a model of the problems and challenges in reality, and a road map for the technology development. Second, by developing applications for practical cases,the aim is to concretize ways to support health information flow. Altogether five machine learning applications for three practical cases are described: The first two applications are binary classification and regression related to the practical case of topic labeling and relevance ranking.The third and fourth application are supervised and unsupervised multi-class classification for the practical case of topic segmentation and labeling.These four applications are tested with Finnish intensive care patient records.The fifth application is multi-label classification for the practical task of diagnosis coding. It is tested with English radiology reports.The performance of all these applications is promising. Third, the aim is to study how the quality of machine learning applications can be reliably evaluated.The associations between performance evaluation measures and methods are addressed,and a new hold-out method is introduced.This method contributes not only to processing time but also to the evaluation diversity and quality. The main conclusion is that developing machine learning applications for text requires interdisciplinary, international collaboration. Practical cases are very different, and hence the development must begin from genuine user needs and domain expertise. The technological expertise must cover linguistics,machine learning, and information systems. Finally, the methods must be evaluated both statistically and through authentic user-feedback.

Concentrated Winding Multiphase Permanent Magnet Machine Design and Electromagnetic Properties – Case Axial Flux Machine

Concentrated winding permanent magnet machines and their electromagnetic properties are studied in this doctoral thesis. The thesis includes a number of main tasks related to the application of permanent magnets in concentrated winding open slot machines. Suitable analytical methods are required for the first design calculations of a new machine. Concentrated winding machines differ from conventional integral slot winding machines in such a way that adapted analytical calculation methods are needed. A simple analytical model for calculating the concentrated winding axial flux machines is provided. The next three main design tasks are discussed in more detail in the thesis. The magnetic length of the rotor surface magnet machines is studied, and it is shown that the traditional methods have to be modified also in this respect. An important topic in this study has been to evaluate and minimize the rotor permanent magnet Joule losses by using segmented magnets in the calculations and experiments. Determination of the magnetizing and leakage inductances for a concentrated winding machine and the torque production capability of concentrated winding machines with different pole pair numbers are studied, and the results are compared with the corresponding properties of integral slot winding machines. The thesis introduces a new practical permanent magnet motor type for industrial use. The special features of the machine are based on the option of using concentrated winding open slot constructions of permanent magnet synchronous machines in the normal speed ranges of industrial motors, for instance up to 3000 min-1, without excessive rotor losses. By applying the analytical equations and methods introduced in the thesis, a 37 kW 2400 min-1 12-slot 10-pole axial flux machine with rotor-surfacemounted magnets is designed. The performance of the designed motor is determined by experimental measurements and finite element calculations.

Computational and Experimental Investigation of the Grooved Roll in Paper Machine Environment

In the paper machine, it is not a desired feature for the boundary layer flows in the fabric and the roll surfaces to travel into the closing nips, creating overpressure. In this thesis, the aerodynamic behavior of the grooved roll and smooth rolls is compared in order to understand the nip flow phenomena, which is the main reason why vacuum and grooved roll constructions are designed. A common method to remove the boundary layer flow from the closing nip is to use the vacuum roll construction. The downside of the use of vacuum rolls is high operational costs due to pressure losses in the vacuum roll shell. The deep grooved roll has the same goal, to create a pressure difference over the paper web and keep the paper attached to the roll or fabric surface in the drying pocket of the paper machine. A literature review revealed that the aerodynamic functionality of the grooved roll is not very well known. In this thesis, the aerodynamic functionality of the grooved roll in interaction with a permeable or impermeable wall is studied by varying the groove properties. Computational fluid dynamics simulations are utilized as the research tool. The simulations have been performed with commercial fluid dynamics software, ANSYS Fluent. Simulation results made with 3- and 2-dimensional fluid dynamics models are compared to laboratory scale measurements. The measurements have been made with a grooved roll simulator designed for the research. The variables in the comparison are the paper or fabric wrap angle, surface velocities, groove geometry and wall permeability. Present-day computational and modeling resources limit grooved roll fluid dynamics simulations in the paper machine scale. Based on the analysis of the aerodynamic functionality of the grooved roll, a grooved roll simulation tool is proposed. The smooth roll simulations show that the closing nip pressure does not depend on the length of boundary layer development. The surface velocity increase affects the pressure distribution in the closing and opening nips. The 3D grooved roll model reveals the aerodynamic functionality of the grooved roll. With the optimal groove size it is possible to avoid closing nip overpressure and keep the web attached to the fabric surface in the area of the wrap angle. The groove flow friction and minor losses play a different role when the wrap angle is changed. The proposed 2D grooved roll simulation tool is able to replicate the grooved aerodynamic behavior with reasonable accuracy. A small wrap angle predicts the pressure distribution correctly with the chosen approach for calculating the groove friction losses. With a large wrap angle, the groove friction loss shows too large pressure gradients, and the way of calculating the air flow friction losses in the groove has to be reconsidered. The aerodynamic functionality of the grooved roll is based on minor and viscous losses in the closing and opening nips as well as in the grooves. The proposed 2D grooved roll model is a simplification in order to reduce computational and modeling efforts. The simulation tool makes it possible to simulate complex paper machine constructions in the paper machine scale. In order to use the grooved roll as a replacement for the vacuum roll, the grooved roll properties have to be considered on the basis of the web handling application.

'No country for old men?' Analyzing older people s attitudes toward mobile communication

Mobile technology plays an increasing role in interpersonal communication,representing a useful resource for different age cohorts. While the usage ofmobile communication by younger people has received a wide attention fromcommunication scholars, its usage by older people is less explored. Thegoal of our research project is to analyse the usage of mobile phones by theelderly in Italy. We conducted 51 semi-structured interviews in Rome and in amid-range town located in Umbria, between October 2013 and February 2014.Our study explores older users¿ motivations and usage practices, their perceptions of mobile phones, theiradoption and domestication of mobile phones, their usage skills. More specifically,our analysis focuses on: - personal characteristics - personal networks (personalnetwork composition, self-perceived social life, communication channels) -adoption of mobile telephone - consumption patterns of mobile devices - usedmobile services - location and mobility of mobile telephone - current mobilecharacteristics - attitude and opinions towards mobile technology Our preliminaryresults show major differences in users¿ behaviours and perceptions, that canbe related to age cohorts (younger olds vs older olds); socio-cultural levels;vital trajectories (in terms of professional and familiar status); and gender.

Improving Cross Direction Basis Weight Profile in a Fourdrinier Paper Machine

The purpose of this study was to improve PM7’s basis weight CD profile in Stora Enso’s Berghuizer mill and to search mechanical defects which affect to the formation of the basis weight CD profile. In the theoretical part PM7’s structure was presented and the formation of the basis weight and caliper CD profiles was examined as well as disturbances which are affecting to the formation. The function of the control system was scrutinised for the side of CD profiles as well as the formation of the measured CD profiles. Tuning of the control system was examined through the response model and filtering. Specification of the response model and filtering was explained and how to determine 2sigma statistical number. In the end of the theoretical part ATPA hardware and a new profile browser were introduced. In the experimental part focus was in the beginning to search and remove mechanical defects which are affecting to CD profiles. The next step was to verify the reliability of the online measurements, to study the stability of the basis weight CD profile and to find out so called fingerprint, a basis weight CD profile which is unique for each paper machine. New response model and filtering value for basis weight CD profile was determined by bump tests. After a follow up period the affect of the new response model and filtering was analysed.

Mobile technology, gender and development in Africa, India and Bangladesh

Presenting

Determining the location for a mobile device by utilization of local resources of the environment

The subject being analyzed of this Master’s Thesis is a development of a service that is used to define a current location of a mobile device. The service utilized data that is obtained from own GPS receiver in some possible cases and as well data from mobile devices which can be afforded for the current environment for acquisition of more precise position of the device. The computation environment is based on context of a mobile device. The service is implemented as an application for communicator series Nokia N8XX. The Master’s Thesis presents theoretical concept of the method and its practical implementation, architecture of the application, requirements and describes a process of its functionality. Also users’ work with application is presented and recommendations for possible future improvements are made.