Análise do padrão IEEE 802.11g para a comunicação do sistema de controle distribuído de semáforos.

Este trabalho propõe a análise da comunicação sem fio para um sistema de controle distribuído de semáforos, a partir da revisão das literaturas, realização de simulações e experimentos, os quais consideram as especificações estabelecidas para o sistema de semáforos. As simulações e os experimentos se baseiam na avaliação do comportamento da comunicação perante a alteração de alguns parâmetros de configuração da rede. O estudo apresentado envolve análises relacionadas ao padrão IEEE 802.11g e às definições da camada física apresentadas nas especificações do padrão. Os métodos utilizados envolvem o estudo e experimentação de parâmetros relacionados à potência de transmissão e recepção, além de análise dos esquemas de modulação utilizados pelo padrão IEEE 802.11g. A metodologia aplicada a este trabalho envolve o conhecimento das características e capacidade dos esquemas de modulação responsáveis pela definição das taxas de transmissão. As análises mostram que a possibilidade de adequação dos parâmetros de configuração de rede, levando em consideração o cenário de aplicação, pode ser um fator essencial para o bom desempenho de todo o sistema.

Controle de uma plataforma inercial estabilizada com três graus de liberdade.

Esta dissertação apresenta o desenvolvimento de uma plataforma inercial autônoma com três graus de liberdade para aplicação em estabilização de sensores - por exemplo, gravimétricos estacionários e embarcados - podendo ser utilizada também para estabilização de câmeras. O sistema é formado pela Unidade de Medida Inercial, IMU, desenvolvida utilizando um sensor micro eletromecânico, MEMS - que possui acelerômetro, giroscópio e magnetômetros nos três eixos de orientação - e um microcontrolador para aquisição, processamento e envio dos dados ao sistema de controle e aquisição de dados. Para controle dos ângulos de inclinação e orientação da plataforma, foi implementado um controlador PID digital utilizando microcontrolador. Este recebe os dados da IMU e fornece os sinais de controle utilizando as saídas PWM que acionam os motores, os quais controlam a posição da plataforma. Para monitoramento da plataforma foi desenvolvido um programa para aquisição de dados em tempo real em ambiente Matlab, por meio do qual se pode visualizar e gravar os sinais da IMU, os ângulos de inclinação e a velocidade angular. Testou-se um sistema de transmissão de dados por rádio frequência entre a IMU e o sistema de aquisição de dados e controle para avaliar a possibilidade da não utilização de slip rings ou fios entre o eixo de rotação e os quadros da plataforma. Entretanto, verificou-se a inviabilidade da transmissão em razão da baixa velocidade de transmissão e dos ruídos captados pelo receptor de rádio frequência durante osmovimentos da plataforma. Sendo assim, dois pares de fios trançados foram utilizados fios para conectar o sensor inercial ao sistema de aquisição e processamento.

Modelagem e controle de marcha de robôs bípedes com disco de inércia.

Esta tese trata de um robô bípede em caminhar dinâmico. Neste robô, que normalmente é um sistema sub-atuado, fazemos uso de um disco de inércia que funciona num certo sentido como um atuador adicional. Através deste disco, obtém-se mais liberdade para a elaboração de passos repetitivos e um aumento na robustez. Por outro lado, o sistema de controle dos passos deve controlar, além do passo propriamente dito, também a velocidade do disco, de modo que não sejam saturados os atuadores (motores elétricos). Apresentamos então um controlador capaz de realizar estas ações simultaneamente.

Mitigação de falhas críticas em sistemas produtivos.

O cenário competitivo e globalizado em que as empresas estão inseridas, sobretudo a partir do século XXI, associados a ciclos de vida cada vez menores dos produtos, rigorosos requisitos de qualidade, além de políticas de preservação do meio ambiente, com redução de consumo energético e de recursos hídricos, somadas às exigências legais de melhores condições de trabalho, resultaram em uma quebra de paradigma nos processos produtivos até então concebidos. Como solução a este novo cenário produtivo pode-se citar o extenso uso da automação industrial, fato que resultou em sistemas cada vez mais complexos, tanto do ponto de vista estrutural, em função do elevado número de componentes, quanto da complexidade dos sistemas de controle. A previsibilidade de todos os estados possíveis do sistema torna-se praticamente impossível. Dentre os estados possíveis pode-se citar os estados de falha que, dependendo da severidade do efeito associado à sua ocorrência, podem resultar em sérios danos para o homem, o meio ambiente e às próprias instalações, caso não sejam corretamente diagnosticados e tratados. Fatos recentes de catástrofes relacionadas à sistemas produtivos revelam a necessidade de se implementar medidas para prevenir e para mitigar os efeitos da ocorrência de falhas, com o objetivo de se evitar a ocorrência de catástrofes. De acordo com especialistas, os Sistemas Instrumentados de Segurança SIS, referenciados em normas como a IEC 61508 e IEC 61511, são uma solução para este tipo de problema. Trabalhos publicados tratam de métodos para a implementação de camadas SIS de prevenção, porém com escassez de trabalhos para camadas SIS de mitigação. Em função do desconhecimento da dinâmica do sistema em estado de falha, técnicas tradicionais de modelagem tornam-se inviáveis. Neste caso, o uso de inteligência artificial, como por exemplo a lógica fuzzy, pode se tornar uma solução para o desenvolvimento do algoritmo de controle, associadas a ferramentas de edição, modelagem e geração dos códigos de controle. A proposta deste trabalho é apresentar uma sistemática para a implementação de um sistema de controle para a mitigação de falhas críticas em sistemas produtivos, com referência às normas IEC 61508/61511, com ação antecipativa à ocorrência de catástrofes.

Data normalization and integration in robotic systems using web services technologies

The robotics is one of the most active areas. We also need to join a large number of disciplines to create robots. With these premises, one problem is the management of information from multiple heterogeneous sources. Each component, hardware or software, produces data with different nature: temporal frequencies, processing needs, size, type, etc. Nowadays, technologies and software engineering paradigms such as service-oriented architectures are applied to solve this problem in other areas. This paper proposes the use of these technologies to implement a robotic control system based on services. This type of system will allow integration and collaborative work of different elements that make up a robotic system.

The Modelling of Photovoltaic, Solar Thermal, and Photovoltaic/Thermal Domestic Hot Water Systems

Solar heating of potable water has traditionally been accomplished through the use of solar thermal (ST) collectors. With the recent increases in availability and lower cost of photovoltaic (PV) panels, the potential of coupling PV solar arrays to electrically heated domestic hot water (DHW) tanks has been considered. Additionally, innovations in the SDHW industry have led to the creation of photovoltaic/thermal (PV/T) collectors, which heat water using both electrical and thermal energy. The current work compared the performance and cost-effectiveness of a traditional solar thermal (ST) DHW system to PV-solar-electric DHW systems and a PV/T DHW system. To accomplish this, a detailed TRNSYS model of the solar hot water systems was created and annual simulations were performed for 250 L/day and 325 L/day loads in Toronto, Vancouver, Montreal, Halifax, and Calgary. It was shown that when considering thermal performance, PV-DHW systems were not competitive when compared to ST-DHW and PVT-DHW systems. As an example, for Toronto the simulated annual solar fractions of PV-DHW systems were approximately 30%, while the ST-DHW and PVT-DHW systems achieved 65% and 71% respectively. With current manufacturing and system costs, the PV-DHW system was the most cost-effective system for domestic purposes. The capital cost of the PV-DHW systems were approximately $1,923-$2,178 depending on the system configuration, and the ST-DHW and PVT system were estimated to have a capital cost of $2,288 and $2,373 respectively. Although the capital cost of the PVT-DHW system was higher than the other systems, a Present Worth analysis for a 20-year period showed that for a 250 L/day load in Toronto the Present Worth of the PV/T system was approximately $4,597, with PV-DHW systems costing approximately $7,683-$7,816 and the ST-DHW system costing $5,238.

Continuous glucose monitoring in diabetic long distance runners

Marathon running is growing in popularity, and many diabetic patients are participating in various marathon races all over the world each year. This study aimed to investigate the prevalence and extent of glycemic excursions (hypo- and hyperglycemic) during a marathon run in patients with well-controlled diabetes mellitus using a continuous glucose monitoring system (CGMS). Five subjects with type 1 and one patient with type 2 diabetes mellitus were monitored with the Medtronic MiniMed CGMS during the 2002 Vienna City Marathon (n = 3) or the Fernwarme run (n = 3) long distance runs of 42.19/15.8 km. All six patients finished their course. The CGSM system was well tolerated in all patients over an average duration of 34 +/- 4.0 hours and it did not limit the patients' activities. The mean running time for the Vienna city marathon was 257 +/- 8 min (247 to 274 min) and for the Fernwarme run 134 +/- 118 min (113 to 150 min). A total of 1470 blood glucose measurements (mean 245 readings per subject) were performed. During and after the marathons frequent hypo and hyperglycemic episodes with and without clinical symptoms were measured. Our data confirm that the CGMS may help to identify asymptomatic hypoglycemia or hyperglycemia during and after a long distance run. The system may also be helpful to improve our understanding about the individual changes of glucose during and after a marathon and may protect hypoglycemic or hyperglycemic periods in future races.

Analysis of chaotic instabilities in a rotating body with internal energy dissipation

Melnikov's method is used to analytically predict the onset of chaotic instability in a rotating body with internal energy dissipation. The model has been found to exhibit chaotic instability when a harmonic disturbance torque is applied to the system for a range of forcing amplitude and frequency. Such a model may be considered to be representative of the dynamical behavior of a number of physical systems such as a spinning spacecraft. In spacecraft, disturbance torques may arise under malfunction of the control system, from an unbalanced rotor, from vibrations in appendages or from orbital variations. Chaotic instabilities arising from such disturbances could introduce uncertainties and irregularities into the motion of the multibody system and consequently could have disastrous effects on its intended operation. A comprehensive stability analysis is performed and regions of nonlinear behavior are identified. Subsequently, the closed form analytical solution for the unperturbed system is obtained in order to identify homoclinic orbits. Melnikov's method is then applied on the system once transformed into Hamiltonian form. The resulting analytical criterion for the onset of chaotic instability is obtained in terms of critical system parameters. The sufficient criterion is shown to be a useful predictor of the phenomenon via comparisons with numerical results. Finally, for the purposes of providing a complete, self-contained investigation of this fundamental system, the control of chaotic instability is demonstated using Lyapunov's method.

The relationship of cervical joint position error to balance and eye movement disturbances in persistent whiplash

Cervical joint position error (JPE) has been used as a measure of cervical afferent input to detect disturbances in sensori-motor control as a possible contributor to a neck pain syndrome. This study aimed to investigate the relationship between cervical JPE, balance and eye movement control. It was of particular interest whether assessment of cervical ME alone was sufficient to signal the presence of disturbances in the two other tests. One hundred subjects with persistent whiplash-associated disorders (WADs) and 40 healthy controls subjects were assessed on measures of cervical JPE, standing balance and the smooth pursuit neck torsion test (SPNT). The results indicated that over all subjects, significant but weak-to-moderate correlations existed between all comfortable stance balance tests and both the SPNT and rotation cervical ME tests. A weak correlation was found between the SPNT and right rotation cervical JPE. An abnormal rotation cervical JPE score had a high positive prediction value (88%) but low sensitivity (60%) and specificity (54%) to determine abnormality in balance and or SPNT test. The results suggest that in patients with persistent WAD, it is not sufficient to measure ME alone. All three measures are required to identify disturbances in the postural control system. (C) 2005 Elsevier Ltd. All rights reserved.

The effect of manipulations to target contrast on emmetropization in chick

Emmetropization is dependent on visual feedback and presumably some measure of the optical and image quality of the eye. We investigated the effect of simple alterations to image contrast on eye growth and refractive development. A 1.6 cyc/deg square-wave-grating target was located at the end of a 3.3 cm cone,, imaged by a +30 D lens and applied monocularly to the eyes of 8-day-old chicks. Eleven different contrast targets were tested: 95, 67, 47.5, 33.5, 24, 17, 12, 8.5, 4.2, 2.1, and 0%. Refractive error (RE), vitreous chamber depth (VC) and axial length (AL) varied with the contrast of the image (RE diff. F-10.86 = 12.420, p < 0.0005; VC diff. F-10.86 = 8.756, p < 0.0005; AL diff. F-10.86 = 9.240, p < 0.0005). Target contrasts 4.2% and lower produced relative myopia (4.2%: RE diff = -7.48 +/- 2.26 D, p = 0.987; 2.1%: RE diff = -7.22 +/- 2.77 D, p = 0.951) of similar amount to that observed in response to a featureless 0% contrast target (RE diff = -9.11 +/- 4.68 D). For target contrast levels 47.5% and greater isometropia was maintained (95%: RE diff = 1.83 +/- 2.78 D; 67%: RE diff = 0.14 +/- 1.84 D; 47.5% RE diff = 0.25 +/- 1.82 D). Contrasts in between produced an intermediate amount of myopia (33.5%: RE diff = -2.81 +/- 1.80 D; 24%: RE diff = -3.45 +/- 1.64 D; 17%: RE diff = -3.19 +/- 1.54 D; 12%: RE diff = -4.08 +/- 3.56 D; 8.5%: RE diff = -4.09 +/- 3.60 D). We conclude that image contrast provides important visual information for the eye growth control system or that contrast must reach a threshold value for some other emmetropization signal to function. (c) 2005 Elsevier Ltd. All rights reserved.

Branching genes are conserved across species. Genes controlling a novel signal in pea are coregulated by other long-distance signals

Physiological and genetic studies with the ramosus (rms) mutants in garden pea (Pisum sativum) and more axillary shoots (max) mutants in Arabidopsis (Arabidopsis thaliana) have shown that shoot branching is regulated by a network of long-distance signals. Orthologous genes RMS1 and MAX4 control the synthesis of a novel graft-transmissible branching signal that may be a carotenoid derivative and acts as a branching inhibitor. In this study, we demonstrate further conservation of the branching control system by showing that MAX2 and MAX3 are orthologous to RMS4 and RMS5, respectively. This is consistent with the longstanding hypothesis that branching in pea is regulated by a novel long-distance signal produced by RMS1 and RMS5 and that RMS4 is implicated in the response to this signal. We examine RMS5 expression and show that it is more highly expressed relative to RMS1, but under similar transcriptional regulation as RMS1. Further expression studies support the hypothesis that RMS4 functions in shoot and rootstock and participates in the feedback regulation of RMS1 and RMS5 expression. This feedback involves a second novel long-distance signal that is lacking in rms2 mutants. RMS1 and RMS5 are also independently regulated by indole-3-acetic acid. RMS1, rather than RMS5, appears to be a key regulator of the branching inhibitor. This study presents new interactions between RMS genes and provides further evidence toward the ongoing elucidation of a model of axillary bud outgrowth in pea.

Compositional analysis of teas from Australian supermarkets

Caffeine, total amino acids, water extract and moisture content are considered to be quality indicators for leaf teas and teabags. These analyses were examined in 20 leaf teas and 36 teabags sampled from Australian supermarkets. About 70% of the analysed samples showed a moisture content higher than Vie maximum accepted level, 6.5%, for tea storage and marketing by the tea industries and traders. Water appropriate extract of 15 samples out of 36 teabags was lower than that of the teas without teabags, which indicates that the quality of the paper used for teabags needs to be evaluated. Moreover, one of the black leaf tea samples was found to have a water extract below the lower limit of international standards. Four green and black teas of the same brand, claimed to contain less than 3% caffeine, were found to have 3-4%, the same as the other samples analysed in this study. The mean total contents of amino acids were 2.50% and 1.76% in black leaf teas and the teabags, respectively, whereas they were 3.44% and 2.28% in green leaf teas and the teabags, respectively. Furthermore, the weights of 28 teabags out of 36 samples were found to lie outside of the proposed +/- 2% variation accepted by the tea industries and traders, and 4 samples showed even larger variation, 10% being out of the proposed weights. This investigation also showed that the solubility of caffeine and water extract was affected by the permeability of teabags, whereas total amino acids were very variable. These results suggest that an efficient and practical quality control system for both imported and Australian-made teas in the Australian supermarkets should be developed, implemented and enforced. Chemical analysis should be a part of the system for establishing an objective assessment for the quality control. (c) 2004 Elsevier Ltd. All rights reserved.

GESTÃO DE RISCO E GOVERNANÇA CORPORATIVA: AS EMPRESAS BRASILEIRAS NA BOLSA DE VALORES DE NOVA YORK

Esta dissertação trata da importância da Governança Corporativa e da Gestão de Risco para as empresas brasileiras que tem suas ações negociadas nas Bolsas de Valores de Nova York e de São Paulo. Tem como principais objetivos: a avaliação do atual estágio de adequação dessas empresas brasileiras às normas da Lei Sarbanes & Oxley, a confirmação da importância do gerenciamento de risco para a Governança Corporativa, buscando fazer uma associação da ocorrência de perdas patrimoniais com as ferramentas da gestão de risco e das fraudes com a fragilidade de normas de controle interno e com as normas emanadas dos órgãos externos regulatórios. O trabalho acadêmico, um estudo exploratório, teve como ponto de partida uma pesquisa bibliográfica de livros e artigos técnicos versando sobre Governança Corporativa com foco na gestão de riscos. A pesquisa foi feita através da leitura dos relatórios de administração das empresas selecionadas e a aplicabilidade das normas da Lei Sarbanes Oxley. Como conclusão foi possível confirmar com razoável certeza que as grandes perdas, que levaram empresas internacionais a quebra, ocorreram pela falta de uma eficaz gestão de risco ou por um deficiente sistema de controle interno associada a falta de ações preventivas. Por outro lado, apesar dos esforços das empresas brasileiras em se adequar às novas exigências para poder atuar no mercado financeiro do Brasil e dos Estados Unidos da América, parte das empresas pesquisadas ainda se encontra em fase de implementação dos Comitês de Auditoria, de Normas e Procedimentos de Controle Interno e das demais práticas de Gestão Corporativa. Novas pesquisas sobre o tema central deste estudo poderão ensejar no aprofundamento da questão da relação custo x benefício da implantação das práticas de Governança Corporativa e na questão da eficácia dos sistemas corporativos de gerenciamento e controle considerando os custos incorridos em sua implantação e manutenção e os benefícios obtidos. Propõe-se ainda um estudo que busque a revisão das responsabilidades das autoridades reguladoras no que tange ao controle ante e pós-fato. Um dilema a ser resolvido e que deve instigar futuros pesquisadores.(AU)

Developing an enterprise simulator to support electronic supply chain for B2B electronic process

The application of any e-Solution promises significant returns. In particular, using internet technologies both within enterprises and across the supply (value) chain provides real opportunity, not only for operational improvement but also for innovative strategic positioning. However, significant questions obscure potential investment; how any value will actually be created and, importantly, how this value will be shared across the value chain is not clear. This paper will describe a programme of research that is developing an enterprise simulator that will provide a more fundamental understanding of the impact of e-Solutions across operational supply chains, in terms of both standard operational and financial measures of performance. An efficient supply chain reduces total costs of operations by sharing accurate real-time information and coordinating inter-organizational business processes. This form of electronic link between organizations is known as business-to-business (B2B) e-Business. The financial measures go beyond simple cost calculations to real bottom-line performance by modelling the financial transactions that business processes generate. The paper will show how this enterprise simulator allows for a complete supply chain to be modelled in this way across four key applications: control system design, virtual enterprises, pan-supply-chain performance metrics and supporting e-Supply-chain design methodology.

Emergent strategy and the measurement of performance:the formulation of performance indicators at the microlevel

This article presents some evidence on an aspect of the design of a strategic control system, at the microlevel, within a single organization. The research we report used an ethnographic approach to provide an understanding of strategy formulation. Our aim is to contribute to an area of literature which is of increasing significance, but relatively underdeveloped in terms of the application of in-depth, field-research techniques. We take an intensive look at the manner in which performance measures are formulated, at the microlevel, within a single organization. The article presents, as an in-depth case analysis, the experience of a fisheries holding company in New Zealand. The article recounts the experiences of managers within the organization of the process of identification of such things as critical success factors and key performance indicators (KPIs) and, more broadly, the formulation of a strategic performance measurement system.