Gestão de organizações sem fins lucrativos: uma avaliação de desempenho através do balanced scorecard

The methodology Balanced Scorecard (BSC) focuses on the major critical issues of modern organizations, whether with or without profit. The measurement of the effective performance of the latter is by evaluating the successful implementation of organizational strategy. The aim of this paper is to present the development of a system of performance measurement strategy for a nonprofit organization, whose object of study is the Associação de Apoio as Comunidades do Campo - AACC, in the context of the BSC methodology of Kaplan and Norton. The methodology of this case study is an exploratory, descriptive and qualitative, and diagnose the coherence of the Strategy Map in an organization, based strategic planning from 2010 to 2012. Initially conducted a literature review covering the main aspects of strategy maps and performance evaluation involving the translation of the BSC and strategy evaluation. The main results of the proposed approach refers to evaluation of overall scores for each dimension of the BSC methodology, financial, customer, internal processes, learning and growth. These results are able to help the organization evaluate and revise their strategy and, in general, to adopt management methods more accurately. Data collection is centered on interviews with semi-structured questionnaire. The findings highlight on balancing and alignment of strategic objectives, low causality map, strategic communication insufficient and fragmented. For interviewees organizational culture is the biggest impediment to structuring a management model based on indicators and strategic process should be initiated by non-financial indicators gradually. The performance indicators of the AACC/RN portray more meritocracy operational procedures of social projects in the context of the Strategic Map determined in a shortterm over the long term. However, there is evidence of improved performance management and strategic taken as a basis of planning as both the strategic map structured. Therefore, the nonprofits need to adopt a form of management that enables planning, setting objectives and targets that provide the continuity of its activities, and generating instruments that can measure the financial performance and non-financial, in order to develop strategic actions for growth and sustainability

Análise comparativa dos métodos de fatores ponderados na seleção de áreas para aterros sanitários

This study presents a comparative analysis of methodologies about weighted factors considered in the selection of areas for deployment of Sanitary Landfills, applying the methodologies of classification criteria with scoring bands Gomes, Coelho, Erba & Veronez (2000); Waquil et al, 2000. That means, we have the Scoring System used by Union of Municipalities of Bahia and the Quality Index Landfill Waste (IQR) which are applyed for this study in Massaranduba Sanitary Landfill located in the municipality of Ceará Mirim /RN, northeastern of Brazil. The study was conducted in order to classify the methodologies and to give support for future studies on environmental management segment, with main goal to propose suited methodologies which allow safety and rigor during the selection, deployment and management of sanitary landfill, in the Brazilian municipalities, in order to help them in the process to extinction of their dumps, in according of Brazilian Nacional Plan of Solid Waste. During this investigation we have studied the characteristics of the site as morphological, hydrogeological, environmental and socio-economic to permit the installation. We consider important to mention the need of deployment from Rio Grande do Norte State Secretary of Environment and Water (SEMARH), Institute of Sustainable Development and Environment of RN (IDEMA), as well, from Federal and Municipal Governments a public policies for the integrated management of urban solid waste that address environmental preservation and improvement of health conditions of the population of the Rio Grande do Norte

Avaliação de indicadores internos em ensaios de digestibilidade

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Gerenciamento de resíduos sólidos recicláveis: estudo de caso das cooperativas do município de Natal/RN

This dissertation conducted in the years 2011 and 2012, an analysis of cooperatives waste pickers in the city of Natal, Rio Grande do Norte, aiming to identify improvements to be implemented to assist the management of waste from the municipality as well as to improve the living conditions of the workers who perform the selective collection, the environmental perspective. This analysis was performed by means of an investigation of the reality in which they live cooperatives and their local representation, using also the law. The research is characterized as a case study of an applied nature, documentary, consultations with the institutions related to the issue of solid waste in the national and local levels; exploratory and descriptive, the main methodological tools technical visits and structured interviews. From these methods was possible to obtain data regarding the organization of cooperatives, environmental perception of the collector of recyclable materials, among other issues. For the analysis of data matrices were used to include comments and method GUT, from which it was possible to identify numerous difficulties faced by recycling cooperatives, and develop proposals for possible improvements in various aspects of their operation, such as infrastructure and production process , which can improve both the waste management and the quality of life of workers involved in the selective collection system city

Energia metabolizável de alimentos na formulação de ração para frangos de corte

O objetivo deste trabalho foi avaliar o efeito da formulação de rações para frangos de corte, com a utilização de valores de energia metabolizável (EM) dos alimentos determinados por diferentes métodos. O delineamento experimental foi inteiramente casualizado, com quatro tratamentos, que consistiram na formulação de rações baseadas na: em aparente corrigida e em aparente, ambas determinadas pelo método da coleta total com pintos; em aparente corrigida, determinada pelo método da coleta total com galos; e em verdadeira corrigida, determinada pelo método da alimentação forçada com galos. Na fase inicial, foi obtido maior consumo de ração, ganho de peso e melhor conversão alimentar com a formulação baseada na em aparente corrigida (pintos). Durante a fase final, a formulação com em verdadeira corrigida (galos) promoveu maior ganho de peso e melhor conversão alimentar. No período de 1 a 49 dias, as aves alimentadas com as rações formuladas com em aparente corrigida (pintos) tiveram melhor desempenho. As características de carcaça não foram influenciadas pelos tratamentos. Até os 21 dias de idade, deve-se considerar os valores de em aparente corrigida (pintos), para a formulação das rações de frangos de corte; após essa idade, deve-se considerar os valores de em aparente corrigida (galos) ou em verdadeira corrigida (galos).

Digestibilidade aparente da energia e da fibra de dietas para ovinos contendo uréia, amiréia ou farelo de algodão

Este trabalho foi conduzido com o objetivo de avaliar a digestibilidade da energia e da fibra de dietas contendo uréia, amiréia ou farelo de algodão como fontes protéicas exclusivas e silagem de milho como volumoso. Utilizaram-se 24 borregos com 11 meses de idade e peso médio 31 kg e o método da coleta total de fezes. A ingestão de matéria seca foi de 64,1; 68,8 e 71,4 g/kg PV0,75/dia e as digestibilidades da energia da FDN e da FB foram 63,0; 67,7 e 64,4%, 39,6; 55,7 e 50,0%, 47,0; 49,3 e 53,4%, respectivamente, para dietas com uréia, amiréia e farelo de algodão. Os ganhos em peso foram 278,5; 348,0; e 293,7 g/anim.dia, na mesma ordem. O uso da amiréia poderá ser o mais adequado, em relação a uréia e farelo de algodão, em dietas para borregos contendo silagem de milho como volumoso.

Determinação de Chaveamento para Recomposição do Serviço em Redes de Distribuição de Energia Elétrica em Média Tensão Através de Métodos Baseado em Parâmetros de Sensibilidade

The reconfiguration of a distribution network is a change in its topology, aiming to provide specific operation conditions of the network, by changing the status of its switches. It can be performed regardless of any system anomaly. The service restoration is a particular case of reconfiguration and should be performed whenever there is a network failure or whenever one or more sections of a feeder have been taken out of service for maintenance. In such cases, loads that are supplied through lines sections that are downstream of portions removed for maintenance may be supplied by the closing of switches to the others feeders. By classical methods of reconfiguration, several switches may be required beyond those used to perform the restoration service. This includes switching feeders in the same substation or for substations that do not have any direct connection to the faulted feeder. These operations can cause discomfort, losses and dissatisfaction among consumers, as well as a negative reputation for the energy company. The purpose of this thesis is to develop a heuristic for reconfiguration of a distribution network, upon the occurrence of a failure in this network, making the switching only for feeders directly involved in this specific failed segment, considering that the switching applied is related exclusively to the isolation of failed sections and bars, as well as to supply electricity to the islands generated by the condition, with significant reduction in the number of applications of load flows, due to the use of sensitivity parameters for determining voltages and currents estimated on bars and lines of the feeders directly involved with that failed segment. A comparison between this process and classical methods is performed for different test networks from the literature about networks reconfiguration

Modelagem em SystemC-AMS de uma plataforma compatível com o sistema de coleta de dados brasileiro

This work presents simulation results of an identification platform compatible with the INPE Brazilian Data Collection System, modeled with SystemC-AMS. SystemC-AMS that is a library of C++ classes dedicated to the simulation of heterogeneous systems, offering a powerful resource to describe models in digital, analog and RF domains, as well as mechanical and optic. The designed model was divided in four parts. The first block takes into account the satellite s orbit, necessary to correctly model the propagation channel, including Doppler effect, attenuation and thermal noise. The identification block detects the satellite presence. It is composed by low noise amplifier, band pass filter, power detector and logic comparator. The controller block is responsible for enabling the RF transmitter when the presence of the satellite is detected. The controller was modeled as a Petri net, due to the asynchronous nature of the system. The fourth block is the RF transmitter unit, which performs the modulation of the information in BPSK ±60o. This block is composed by oscillator, mixer, adder and amplifier. The whole system was simulated simultaneously. The results are being used to specify system components and to elaborate testbenchs for design verification

Desenvolvimento de uma ferramenta computacional para aplicação em métodos de elevação por bombeio centrífugo submerso

The Electrical Submersible Pump (ESP) has been one of the most appropriate solutions for lifting method in onshore and offshore applications. The typical features for this application are adverse temperature, viscosity fluids and gas environments. The difficulties in equipments maintenance and setup contributing to increasing costs of oil production in deep water, therefore, the optimization through automation can be a excellent approach for decrease costs and failures in subsurface equipment. This work describe a computer simulation related with the artificial lifting method ESP. This tool support the dynamic behavior of ESP approach, considering the source and electric energy transmission model for the motor, the electric motor model (including the thermal calculation), flow tubbing simulation, centrifugal pump behavior simulation with liquid nature effects and reservoir requirements. In addition, there are tri-dimensional animation for each ESP subsytem (transformer, motor, pump, seal, gas separator, command unit). This computer simulation propose a improvement for monitoring oil wells for maximization of well production. Currenty, the proprietaries simulators are based on specific equipments manufactures. Therefore, it is not possible simulation equipments of another manufactures. In the propose approach there are support for diverse kinds of manufactures equipments

Comparação de métodos de enxertia em pepino

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudos de algumas ferramentas de coleta e visualização de dados e desempenho de aplicações paralelas no ambiente MPI

The last years have presented an increase in the acceptance and adoption of the parallel processing, as much for scientific computation of high performance as for applications of general intention. This acceptance has been favored mainly for the development of environments with massive parallel processing (MPP - Massively Parallel Processing) and of the distributed computation. A common point between distributed systems and MPPs architectures is the notion of message exchange, that allows the communication between processes. An environment of message exchange consists basically of a communication library that, acting as an extension of the programming languages that allow to the elaboration of applications parallel, such as C, C++ and Fortran. In the development of applications parallel, a basic aspect is on to the analysis of performance of the same ones. Several can be the metric ones used in this analysis: time of execution, efficiency in the use of the processing elements, scalability of the application with respect to the increase in the number of processors or to the increase of the instance of the treat problem. The establishment of models or mechanisms that allow this analysis can be a task sufficiently complicated considering parameters and involved degrees of freedom in the implementation of the parallel application. An joined alternative has been the use of collection tools and visualization of performance data, that allow the user to identify to points of strangulation and sources of inefficiency in an application. For an efficient visualization one becomes necessary to identify and to collect given relative to the execution of the application, stage this called instrumentation. In this work it is presented, initially, a study of the main techniques used in the collection of the performance data, and after that a detailed analysis of the main available tools is made that can be used in architectures parallel of the type to cluster Beowulf with Linux on X86 platform being used libraries of communication based in applications MPI - Message Passing Interface, such as LAM and MPICH. This analysis is validated on applications parallel bars that deal with the problems of the training of neural nets of the type perceptrons using retro-propagation. The gotten conclusions show to the potentiality and easinesses of the analyzed tools.

Métodos e temperaturas de hidratação na qualidade fisiológica de sementes de milho

O procedimento de uniformização e elevação do teor de água das sementes é recomendável para se obter resultados uniformes e confiáveis, em testes para a qualidade fisiológica de sementes, como o envelhecimento acelerado e a deterioração controlada. O trabalho teve como objetivo avaliar a qualidade fisiológica de sementes de milho, após a hidratação sob diferentes métodos e temperaturas, visando à elevação do teor de água para 15; 20 e 25%. Empregou-se o delineamento inteiramente casualizado, em esquema fatorial 4 x 2, com quatro repetições. Os tratamentos foram constituídos de quatro métodos de hidratação (substrato úmido, atmosfera úmida, imersão em água e adição da quantidade de água requerida) sob duas temperaturas (20 e 30 °C). Após a hidratação, as sementes foram submetidas às seguintes determinações: teor de água, condutividade elétrica, porcentagens de germinação e de plântulas normais na primeira contagem do teste de germinação, massas secas das porções aérea, radicular e total das plântulas obtidas na primeira contagem. O método da atmosfera úmida proporciona redução da qualidade fisiológica das sementes de milho nos três teores de água. A temperatura de 30 °C e o método da imersão direta em água não alteram a qualidade fisiológica das sementes de milho, mostrando-se adequados para a hidratação visando à elevação do teor de água para 15; 20 e 25%.

Avaliação de métodos de inoculação de Phytophthora parasitica em plântulas e plantas jovens de citros

Este trabalho teve como objetivo avaliar métodos de inoculação de Phytophthoraparasitica em plântulas e plantas jovens de citros (Citrus spp.) visando sua utilização em estudos de resistência de porta-enxertos à gomose de Phytophthora. Os métodos de inoculação testados foram: contato planta sem ferimento-patógeno, casca destacada, inserção de disco de meio de cultura contendo micélio sob a casca, método do disco e inserção de agulha e palito infestados em plântulas e plantas jovens de citros. A resistência de genótipos à gomose pode ser avaliada em plântulas in vitro, através de inserção de agulha infestada. O método do disco e o da inserção sob casca foram os melhores quando utilizados em plantas jovens. A medida da área total da lesão é a variável ideal para avaliação da doença. No entanto, o comprimento da lesão pode ser utilizado na avaliação da doença em plântulas, plantas jovens e no campo.

Desenvolvimento de métodos construtivos e de novos materiais empregados na confecção de cartuchos de próteses de membros inferiores

The manufacture of prostheses for lower limb amputees (transfemural and transtibial) requires the preparation of a cartridge with appropriate and custom fit to the profile of each patient. The traditional process to the patients, mainly in public hospitals in Brazil, begins with the completion of a form where types of equipment, plugins, measures, levels of amputation etc. are identified. Currently, such work is carried out manually using a common metric tape and caliper of wood to take the measures of the stump, featuring a very rudimentary, and with a high degree of uncertainty geometry of the final product. To address this problem, it was necessary to act in two simultaneously and correlated directions. Originally, it was developed an integrated tool for viewing 3D CAD for transfemoral types of prostheses and transtibial called OrtoCAD I. At the same time, it was necessary to design and build a reader Mechanical equipment (sort of three-dimensional scanner simplified) able to obtain, automatically and with accuracy, the geometric information of either of the stump or the healthy leg. The methodology includes the application of concepts of reverse engineering to computationally generate the representation of the stump and/or the reverse image of the healthy member. The materials used in the manufacturing of prostheses nor always obey to a technical scientific criteria, because, if by one way it meets the criteria of resistance, by the other, it brings serious problems mainly due to excess of weight. This causes to the user various disorders due to lack of conformity. That problem was addressed with the creation of a hybrid composite material for the manufacture of cartridges of prostheses. Using the Reader Fitter and OrtoCAD, the new composite material, which aggregates the mechanical properties of strength and rigidity on important parameters such as low weight and low cost, it can be defined in its better way. Besides, it brings a reduction of up steps in the current processes of manufacturing or even the feasibility of using new processes, in the industries, in order to obtain the prostheses. In this sense, the hybridization of the composite with the combination of natural and synthetic fibers can be a viable solution to the challenges offered above

Propagação vegetativa de aroeira-pimenteira (Schinus terebinthifolius Raddi)

Este trabalho foi realizado com o objetivo de avaliar os melhores métodos e épocas de realização da enxertia, sobre o pegamento de enxertos de aroeira-pimenteira (Schinus terebinthifolius Raddi). Foram conduzidos dois experimentos, instalados na Faculdade de Ciências Agronômicas, da Universidade Estadual Paulista - Câmpus de Botucatu-SP, nos períodos de 16 de dezembro de 2005 a 30 de janeiro 2006 e de 03 de junho a 17 de julho de 2006. O delineamento utilizado foi de blocos casualizados, com cinco tratamentos, três repetições cada e dez plantas por parcela. Os tratamentos foram: garfagem no topo em fenda cheia, inglês simples, inglês complicado; borbulhia em T normal e T invertido. As diferentes épocas do ano alteraram o índice de pegamento, o que restringe o período de coleta de garfos. A maior porcentagem de pegamento ocorreu no mês de dezembro, com a enxertia em fenda cheia (40%). No mês de junho, não houve pegamento significativo, mostrando então que o mês de dezembro é o mês ideal, entre os estudados, para a realização da enxertia em aroeira. As garfagens em geral foram superiores à borbulhia. Houve baixo índice de pegamento, quando não foi nulo, e, além disso, suas borbulhas não apresentaram brotos dentro de 45 dias. A maior porcentagem de plantas com brotos, aos 45 dias, foi pelo método inglês simples, com 92%.