Identification of fatty foods with contamination possibilities by plasticizers when stored in PVC film packaging

Poly-(vinyl chloride) (PVC) requires the addition of plasticizers - additives that give flexibility and malleability for its processing into flexible film. The most used ones are: di-(2-ethylhexyl) adipate (DEHA) and di-(2-ethylhexyl) phthalate (DEHP). Toxic effects of DEHP have been observed by several authors. Phthalates are being replaced by alternative substances in PVC flexible products, because of their possible toxicological effects. DEHA is a substitute for phthalates widely used as a plasticizer in PVC materials for involving food. Some authors have shown that the exposure to DEHA also induces toxicity. A cross-sectional study was performed to identify which fatty foods carry the possibility of contamination by DEHP and DEHA. Eighteen different foods with at least 3% (m/m) fat and the possibility of being wrapped in plastic film were determined. This study suggested that all foods were subject to contamination by DEHP and DEHA in those conditions - in decreasing consumption order of 96 to 22% in the convenience sample. New guidelines on the limits of DEHA and DEHP established by the Brazilian legislation, as additives in PVC film for packaging fatty food, are still relevant to ensure human health.

Identification of volatile compounds in thinning discards from plum trees (Prunus salicina Lindl.) cultivar Harry Pickstone

Plum (Prunus salicina Lindl. cv. Harry Pickstone), a China indigenous fruit, is widely produced and consumed in countries such as Japan and Brazil. The practice of thinning is common in horticulture and the fruits removed are discarded as waste. Like the great majority of vegetables, these thinning discards also contain essential oils which have not been investigated until the present time. The extraction of the plum thinning discards volatile oil, through the hydrodistillation method, produced a yield of 0.06% (m/m) and a total of 21 components were identified, with 11 of them being responsible for 72,9% of the total oil composition. The major compounds determined through GC and GC-MS were Z-α-bisabolene (13.7%), n-hexadecanoic acid (12.7%), phytol (12.7%), and β-caryophyllene (10.4%).

Standardization of a multiplex PCR for the identification of coagulase-positive Staphylococcus

The enterotoxigenic species Staphylococcus aureus, S. hyicus and S. intermedius show very similar characteristics, making their identification through conventional microbiological methods difficult. This study aimed at the development of a Multiplex PCR (mPCR) for the identification of S. aureus, S. intermedius and S. hyicus using the nuc gene as the target sequence. The results obtained suggest that the set of primers used was specific for the three species of Staphylococcus evaluate with a detection limit of 10² CFU.mL-1.

Influence of color on acceptance and identification of flavor of foods by adults

The sensory characteristics color and flavor of food play an important role not only in the selection, but also in the determination of consumption, satiation, and ingestion. With the objective to determine and evaluate the influence of color on the acceptance and identification of flavor of foods for adults, sensory analysis was performed on jellies by non-trained tasters of both sexes aged between 18 and 60 years (1750 tests). A hedonic scale and combinations of five colors (red, yellow, green, blue and purple) and three flavors (strawberry, pineapple, and limes) were used in the acceptance test totaling 15 samples. In the duo-trio discrimination test, together with the reference sample (R), one sample identical to the reference and another of identical color and different flavor were offered, and the judges were requested to identify the sample that was different from the reference sample. The colors used did not influence the acceptance of the samples (P > 0.05), and as there was not significant interaction between color and flavor. However, the limes flavor negatively influenced acceptance when compared to the other flavors. With regard to flavor differentiation, the colors used did not influence flavor identification (P > 0.05); However, differentiated behavior was identified between females and males, and the latter were more error-prone. Therefore, under the experimental conditions tested, color did not influence the acceptance and identification of the flavor of the samples by adults.

Extraction of DNA from honey and its amplification by PCR for botanical identification

The physiochemical and biological properties of honey are directly associated to its floral origin. Some current commonly used methods for identification of botanical origin of honey involve palynological analysis, chromatographic methods, or direct observation of the bee behavior. However, these methods can be less sensitive and time consuming. DNA-based methods have become popular due to their simplicity, quickness, and reliability. The main objective of this research is to introduce a protocol for the extraction of DNA from honey and demonstrate that the molecular analysis of the extracted DNA can be used for its botanical identification. The original CTAB-based protocol for the extraction of DNA from plants was modified and used in the DNA extraction from honey. DNA extraction was carried out from different honey samples with similar results in each replication. The extracted DNA was amplified by PCR using plant specific primers, confirming that the DNA extracted using the modified protocol is of plant origin and has good quality for analysis of PCR products and that it can be used for botanical identification of honey.

Identification and characterisation of phenolic compounds extracted from Moroccan olive mill wastewater

Olive mill wastewater, hereafter noted as OMWW was tested for its composition in phenolic compounds according to geographical areas of olive tree, i.e. the plain and the mountainous areas of Tadla-Azilal region (central Morocco). Biophenols extraction with ethyl acetate was efficient and the phenolic extract from the mountainous areas had the highest concentration of total phenols' content. Fourier-Transform-Middle Infrared (FT-MIR) spectroscopy of the extracts revealed vibration bands corresponding to acid, alcohol and ketone functions. Additionally, HPLC-ESI-MS analyses showed that phenolic alcohols, phenolic acids, flavonoids, secoiridoids and derivatives and lignans represent the most abundant phenolic compounds. Nüzhenide, naringenin and long chain polymeric substances were also detected. Mountainous areas also presented the most effective DPPH scavenging potential compared to plain areas; IC50 values were 11.7 ± 5.6 µg/ml and 30.7 ± 4.4 µg/ml, respectively. OMWW was confirmed as a rich source of natural phenolic antioxidant agents.

Detection, Identification and Molecular Variation of Human Enteroviruses

Picornaviruses are the most common human viruses and the identification of the picornaviruses is nowadays based on molecular techniques, for example, reverse transcriptase polymerase chain reaction (RT-PCR). One aim of this thesis was to improve the identification of picornaviruses, especially rhino- and enteroviruses, with a real-time assay format and, also, to improve the differentiation of the viruses with genus-specific locked nucleic acid (LNA) probes. Another aim was to identify and study the causative agent of the enterovirus epidemics that appeared in Finland during seasons 2008-2010. In this thesis, the first version of picornavirus qRT-PCR with a melting curve analysis was used in a study of rhinovirus transmission within families with a rhinovirus positive index child where rhinovirus infection was monitored in all family members. In conclusion, rhinoviruses spread effectively within families causing mostly symptomatic infections in children and asymptomatic infections in adults. To improve the differentiation between rhino- and enterovirus the picornavirus qRT-PCR was modified with LNA-incorporated probes. The LNA probes were validated with picornavirus prototypes and different clinical specimen types. The LNA probe-based picornavirus qRT-PCR was able to differentiate all rhino- and enteroviruses correctly, which makes it suitable for diagnostic use. Moreover, in this thesis enterovirus outbreaks were studied with a well-observed method to create a strain-specific qRT-PCR from the typing region VP1 protein. In a hand-foot-and-mouth-disease (HFMD) outbreak in 2008, the causative agent was identified as CV-A6 and when the molecular evolution of the new HFMD CV-A6 strain was studied it was found that CV-A6 was the emerging agent for HFMD and onychomadesis. Furthermore, unusual E-30 meningitis epidemics that apeared during seasons 2009 and 2010 were studied with strain-specific qRT-PCR. The E-30 affected mostly adolescents and was probably spread in sports teams.

Active Magnetic Bearing System Identification Methods and Rotor Model Updating

Active magnetic bearing is a type of bearing which uses magnetic field to levitate the rotor. These bearings require continuous control of the currents in electromagnets and data from position of the rotor and the measured current from electromagnets. Because of this different identification methods can be implemented with no additional hardware. In this thesis the focus was to implement and test identification methods for active magnetic bearing system and to update the rotor model. Magnetic center calibration is a method used to locate the magnetic center of the rotor. Rotor model identification is an identification method used to identify the rotor model. Rotor model update is a method used to update the rotor model based on identification data. These methods were implemented and tested with a real machine where rotor was levitated with active magnetic bearings and the functionality of the methods was ensured. Methods were developed with further extension in mind and also with the possibility to apply them for different machines with ease.

Wood species identification by visual characterization of fibers

Kandidaatintyö tehtiin osana PulpVision-tutkimusprojektia, jonka tarkoituksena on kehittää kuvapohjaisia laskenta- ja luokittelumetodeja sellun laaduntarkkailuun paperin valmistuksessa. Tämän tutkimusprojektin osana on aiemmin kehitetty metodi, jolla etsittiin kaarevia rakenteita kuvista, ja tätä metodia hyödynnettiin kuitujen etsintään kuvista. Tätä metodia käytettiin lähtökohtana kandidaatintyölle. Työn tarkoituksena oli tutkia, voidaanko erilaisista kuitukuvista laskettujen piirteiden avulla tunnistaa kuvassa olevien kuitujen laji. Näissä kuitukuvissa oli kuituja neljästä eri puulajista ja yhdestä kasvista. Nämä lajit olivat akasia, koivu, mänty, eukalyptus ja vehnä. Jokaisesta lajista valittiin 100 kuitukuvaa ja nämä kuvat jaettiin kahteen ryhmään, joista ensimmäistä käytettiin opetusryhmänä ja toista testausryhmänä. Opetusryhmän avulla jokaiselle kuitulajille laskettiin näitä kuvaavia piirteitä, joiden avulla pyrittiin tunnistamaan testausryhmän kuvissa olevat kuitulajit. Nämä kuvat oli tuottanut CEMIS-Oulu (Center for Measurement and Information Systems), joka on mittaustekniikkaan keskittynyt yksikkö Oulun yliopistossa. Yksittäiselle opetusryhmän kuitukuvalle laskettiin keskiarvot ja keskihajonnat kolmesta eri piirteestä, jotka olivat pituus, leveys ja kaarevuus. Lisäksi laskettiin, kuinka monta kuitua kuvasta löydettiin. Näiden piirteiden eri yhdistelmien avulla testattiin tunnistamisen tarkkuutta käyttämällä k:n lähimmän naapurin menetelmää ja Naiivi Bayes -luokitinta testausryhmän kuville. Testeistä saatiin lupaavia tuloksia muun muassa pituuden ja leveyden keskiarvoja käytettäessä saavutettiin jopa noin 98 %:n tarkkuus molemmilla algoritmeilla. Tunnistuksessa kuitujen keskimäärinen pituus vaikutti olevan kuitukuvia parhaiten kuvaava piirre. Käytettyjen algoritmien välillä ei ollut suurta vaihtelua tarkkuudessa. Testeissä saatujen tulosten perusteella voidaan todeta, että kuitukuvien tunnistaminen on mahdollista. Testien perusteella kuitukuvista tarvitsee laskea vain kaksi piirrettä, joilla kuidut voidaan tunnistaa tarkasti. Käytetyt lajittelualgoritmit olivat hyvin yksinkertaisia, mutta ne toimivat testeissä hyvin.

Identification and validation of novel prostate cancer biomarkers

Prostate cancer (PCa) has emerged as the most commonly diagnosed lethal cancer in European men. PCa is a heterogeneous cancer that in the majority of the cases is slow growing: consequently, these patients would not need any medical treatment. Currently, the measurement of prostate-specific antigen (PSA) from blood by immunoassay followed by digital rectal examination and a pathological examination of prostate tissue biopsies are the most widely used methods in the diagnosis of PCa. These methods suffer from a lack of sensitivity and specificity that may cause either missed cancers or overtreatment as a consequence of over-diagnosis. Therefore, more reliable biomarkers are needed for a better discrimination between indolent and potentially aggressive cancers. The aim of this thesis was the identification and validation of novel biomarkers for PCa. The mRNA expression level of 14 genes including AMACR, AR, PCA3, SPINK1, TMPRSS2-ERG, KLK3, ACSM1, CACNA1D, DLX1, LMNB1, PLA2G7, RHOU, SPON2, and TDRD1 was measured by a truly quantitative reverse transcription PCR in different prostate tissue samples from men with and without PCa. For the last eight genes the function of the genes in PCa progression was studied by a specific siRNA knockdown in PC-3 and VCaP cells. The results from radical prostatectomy and cystoprostatectomy samples showed statistically significant overexpression for all the target genes, except for KLK3 in men with PCa compared with men without PCa. Statistically significant difference was also observed in low versus high Gleason grade tumors (for PLA2G7), PSA relapse versus no relapse (for SPON2), and low versus high TNM stages (for CACNA1D and DLX1). Functional studies and siRNA silencing results revealed a cytotoxicity effect for the knock-down of DLX1, PLA2G7, and RHOU, and altered tumor cell invasion for PLA2G7, RHOU, ACSM1, and CACNA1D knock-down in 3D conditions. In addition, effects on tumor cell motility were observed after silencing PLA2G7 and RHOU in 2D monolayer cultures. Altogether, these findings indicate the possibility of utilizing these new markers as diagnostic and prognostic markers, and they may also represent therapeutic targets for PCa.

Alicaligenes faecalis : identification and study of its antagonistic properties against Botrytis cinerea

A Gram negative aerobic flagellated bacterium with fungal growth inhibitory properties was isolated from a culture of Trichoderma harzianum. According to its cultural characteristics and biochemical properties it was identified as a strain of Alcaligenes (aeca/is Castellani and Chalmers. Antisera prepared in Balbc mice injected with live and heat-killed bacterial cells gave strong reactions with the homologous immunogen and with ATCC 15554, the type strain of A. taeca/is, but not with Escherichia coli or Enterobacter aerogens in immunoprecipitation and dot immunobinding assays. Growth of Botrytis cinerea Pers. and several other fungi was significantly affected when co-cultured with A. taeca/is on solid media. Its detrimental effect on germination and growth of B. cinerea has been found to be associated with antifungal substances produced by the bacterium and released into the growth medium. A biotest for the antibiotic substances, based on their inhibitory effect on germination of B. cinerea conidia, was developed. This biotest was used to study the properties of these substances, the conditions in which they are produced, and to monitor the steps of their separation during extraction procedures. It has been found that at least two substances could be involved in the antagonistic interaction. One of these is a basic volatile substance and has been identified as ammonia. The other substance is a nonvolatile, dialysable, heat stable, polar compound released into the growth medium. After separation of growth medium samples by Sephadex G-10 column chromatography a single peak with a molecular weight below 700 Daltons exhibited inhibitory activity. From its behaviour in electrophoretic separation in agarose gels it seems that this is a neutral or slightly positively charged.

Elementary computer-mediated online distance education : identification of criteria for successful implementation and practice

This study had three purposes related to the effective implem,entation and practice of computer-mediated online distance education (C-MODE) at the elementary level: (a) To identify a preliminary framework of criteria 'or guidelines for effective implementation and practice, (b) to identify areas ofC-MODE for which criteria or guidelines of effectiveness have not yet been developed, and (c) to develop an implementation and practice criteria questionnaire based on a review of the distance education literature, and to use the questionnaire in an exploratory survey of elementary C-MODE practitioners. Using the survey instrument, the beliefs and attitudes of 16 elementary C'- MODE practitioners about what constitutes effective implementation and practice principles were investigated. Respondents, who included both administrators and instructors, provided information about themselves and the program in which they worked. They rated 101 individual criteria statenlents on a 5 point Likert scale with a \. point range that included the values: 1 (Strongly Disagree), 2 (Disagree), 3 (Neutral or Undecided), 4 (Agree), 5 (Strongly Agree). Respondents also provided qualitative data by commenting on the individual statements, or suggesting other statements they considered important. Eighty-two different statements or guidelines related to the successful implementation and practice of computer-mediated online education at the elementary level were endorsed. Response to a small number of statements differed significantly by gender and years of experience. A new area for investigation, namely, the role ofparents, which has received little attention in the online distance education literature, emerged from the findings. The study also identified a number of other areas within an elementary context where additional research is necessary. These included: (a) differences in the factors that determine learning in a distance education setting and traditional settings, (b) elementary students' ability to function in an online setting, (c) the role and workload of instructors, (d) the importance of effective, timely communication with students and parents, and (e) the use of a variety of media.

Exploring the potential of early identification and intervention within a college of applied arts

This study probed for an answer to the question, "How do you identify as early as possible those students who are at risk of failing or dropping out of college so that intervention can take place?" by field testing two diagnostic instruments with a group of first semester Seneca College Computer Studies students. In some respects, the research approach was such as might be taken in a pilot study. Because of the complexity of the issue, this study did not attempt to go beyond discovery, understanding and description. Although some inferences may be drawn from the results of the study, no attempt was made to establish any causal relationship between or among the factors or variables represented here. Both quantitative and qualitative data were gathered during. four resea~ch phases: background, early identification, intervention, and evaluation. To gain a better understanding of the problem of student attrition within the School of Computer Studies at Seneca College, several methods were used, including retrospective analysis of enrollment statistics, faculty and student interviews and questionnaires, and tracking of the sample population. The significance of the problem was confirmed by the results of this study. The findings further confirmed the importance of the role of faculty in student retention and support the need to improve the quality of teacher/student interaction. As well, the need __f or ~~ills as~e:ss_~ent foll,,-~ed }JY supportiv e_c_ounsell~_I'l9_ ~~d_ __ placement was supported by the findings from this study. strategies for reducing student attrition were identified by faculty and students. As part of this study, a project referred to as "A Student Alert project" (ASAP) was undertaken at the School of Computer Studies at Seneca College. Two commercial diagnostic instruments, the Noel/Levitz College Student Inventory (CSI) and the Learning and Study Strategies Inventory (LASSI), provided quantitative data which were subsequently analyzed in Phase 4 in order to assess their usefulness as early identification tools. The findings show some support for using these instruments in a two-stage approach to early identification and intervention: the CSI as an early identification instrument and the LASSI as a counselling tool for those students who have been identified as being at risk. The findings from the preliminary attempts at intervention confirmed the need for a structured student advisement program where faculty are selected, trained, and recognized for their advisor role. Based on the finding that very few students acted on the diagnostic results and recommendations, the need for institutional intervention by way of intrusive measures was confirmed.

Identification and description of the development of the relationships between mentor and mentee teachers in the Halton Board of Education "Partners in the Classroom" Program

Fifteen mentoring pairs of teachers were randomly selected from each group of teachers that had participated in the Halton Board of Education "Partners in the Classroom" program during 1988/89, 1989/90, and 1990/91. Each teacher was personally interviewed. Interviews were recorded, transcriptions were prepared and examined and analyzed. During the first part of the interview questions were asked regarding personal and professional demographics. The purpose of the second part of the interview was to gain information relating to the development of the relationships, over a three-year period, between mentor and mentee teacher participants in the "Partners in the Classroom" program. The analysis of the data suggest that there are identifiable changes in the development of the relationship between the mentor teacher and the mentee teacher over time. Implications from the study results that could enhance the induction program for new teachers are discussed.

Investigation of the composition of linear alkylbenzenes with emphasis on the identification and quantitation of some trace compounds using GS/MS system in both electron impact and chemical ionization modes

Linear alkylbenzenes, LAB, formed by the Alel3 or HF catalyzed alkylation of benzene are common raw materials for surfactant manufacture. Normally they are sulphonated using S03 or oleum to give the corresponding linear alkylbenzene sulphonates In >95 % yield. As concern has grown about the environmental impact of surfactants,' questions have been raised about the trace levels of unreacted raw materials, linear alkylbenzenes and minor impurities present in them. With the advent of modem analytical instruments and techniques, namely GCIMS, the opportunity has arisen to identify the exact nature of these impurities and to determine the actual levels of them present in the commercial linear ,alkylbenzenes. The object of the proposed study was to separate, identify and quantify major and minor components (1-10%) in commercial linear alkylbenzenes. The focus of this study was on the structure elucidation and determination of impurities and on the qualitative determination of them in all analyzed linear alkylbenzene samples. A gas chromatography/mass spectrometry, (GCIMS) study was performed o~ five samples from the same manufacturer (different production dates) and then it was followed by the analyses of ten commercial linear alkylbenzenes from four different suppliers. All the major components, namely linear alkylbenzene isomers, followed the same elution pattern with the 2-phenyl isomer eluting last. The individual isomers were identified by interpretation of their electron impact and chemical ionization mass spectra. The percent isomer distribution was found to be different from sample to sample. Average molecular weights were calculated using two methods, GC and GCIMS, and compared with the results reported on the Certificate of Analyses (C.O.A.) provided by the manufacturers of commercial linear alkylbenzenes. The GC results in most cases agreed with the reported values, whereas GC/MS results were significantly lower, between 0.41 and 3.29 amu. The minor components, impurities such as branched alkylbenzenes and dialkyltetralins eluted according to their molecular weights. Their fragmentation patterns were studied using electron impact ionization mode and their molecular weight ions confirmed by a 'soft ionization technique', chemical ionization. The level of impurities present i~ the analyzed commercial linear alkylbenzenes was expressed as the percent of the total sample weight, as well as, in mg/g. The percent of impurities was observed to vary between 4.5 % and 16.8 % with the highest being in sample "I". Quantitation (mg/g) of impurities such as branched alkylbenzenes and dialkyltetralins was done using cis/trans-l,4,6,7-tetramethyltetralin as an internal standard. Samples were analyzed using .GC/MS system operating under full scan and single ion monitoring data acquisition modes. The latter data acquisition mode, which offers higher sensitivity, was used to analyze all samples under investigation for presence of linear dialkyltetralins. Dialkyltetralins were reported quantitatively, whereas branched alkylbenzenes were reported semi-qualitatively. The GC/MS method that was developed during the course of this study allowed identification of some other trace impurities present in commercial LABs. Compounds such as non-linear dialkyltetralins, dialkylindanes, diphenylalkanes and alkylnaphthalenes were identified but their detailed structure elucidation and the quantitation was beyond the scope of this study. However, further investigation of these compounds will be the subject of a future study.