945 resultados para high density polyethylene
Resumo:
Deconfinement phase transition and neutrino trapping in (proto)neutron star matter are investigated in a chiral hadronic model (also referred to as the FST model) for the hadronic phase (HP) and in the color-flavor-locked (CFL) quark model for the deconfined quark phase. We include a perturbative QCD correction parameter alpha(s) in the CFL quark matter equation of states. It is shown that the CFL quark core with K-0 condensation forms in neutron star matter with the large value of alpha(s). If the small value of alpha(s) is taken, hyperons suppress the CFL quark phase and the HP is dominant in the high-density region of (proto)neutron star matter. Neutrino trapping makes the fraction of the CFL quark matter decrease compared with those without neutrino trapping. Moreover, increasing the QCD correction parameter alpha(s) or decreasing the bag constant B and the strange quark mass m(s) can make the fraction of the CFL quark matter increase, simultaneously, the fraction of neutrino in protoneutron star matter increases, too. The maximum masses and the corresponding radii of (proto)neutron stars are not sensitive to the QCD correction parameter alpha(s).
Resumo:
The properties of baryons in nuclear matter are analysed in the relativistic mean-field theory(RMF). It is found that the scalar field sigma meson affects the properties of baryon at high density. A density dependent scalar coupling g(sigma)(N) is determined according to the idea of quark-meson coupling model and extended to RMF. It is shown that g(sigma)(N), affects the property of nuclear matter weakly at low density, but strongly at high density. The relation between the scalar density rho(S) and the nuclear density rho and the effective mass of the pentaquark circle minus(+) are studied with the density dependent coupling constant. The density dependent scalar coupling obviously affects the effective masses of baryons in nuclear matter, especially at high density.
Resumo:
In the present work p-type Si specimens were implanted with Cl ions of 100 keV to successively increasing fluences of 1 x 10(15), 5 x 10(15), 1 x 10(16) and 5 x 10(16) ions cm(-2) and subsequently annealed at 1073 K for 30 min. The microstructure was investigated with the transmission electron microscopy (TEM) in both the plane-view and the cross-sectional view. The implanted layer was amorphized after chlorine implantation even at the lowest ion fluence, while re-crystallization of the implanted layer occurs on subsequent annealing at 1073 K. In the annealed specimens implanted above the lowest fluence three layers along depth with different microstructures were found, which include a shallow polycrystalline porous layer, a deeper single-crystalline layer containing high density of gas bubbles, a well separated deeper layer composed of dislocation loops in low density. With increasing ion fluence the thickness of the porous polycrystalline layer increases. It is indicated that chlorine can suppress the epitaxial re-crystallization of implanted silicon, when the implant fluence of Cl ions exceeds a certain level.
Resumo:
In this paper, we try to detect the SZ effect in the 2MASS DWT clusters and less bound objects in order to constrain the warm-hot intergalactic medium distribution on large scales by cross-correlation analysis. The results of both observed WMAP and mock SZ effect map indicate that the hot gas distributes from inside as well as outside of the high density regions of galaxy clusters, which is consistent with the results of both observation and hydro simulation. Therefore, the DWT measurement of the cross-correlation would be a powerful tool to probe the missing of baryons in the universe.
Resumo:
Based on the isospin-dependent transport model IBUU and on the scaling model according to nucleon effective mass, effects of elastic and inelastic NN scattering cross-sections on pi(-)/pi(+) in the neutron-rich reaction Ca-48 + Ca-48 at a beam energy of 400MeV/nucleon are studied. It is found that cross-section effects of both NN elastic and inelastic scatterings affect Delta(1232), pi(-) and pi(+) productions as well as the value of pi(-)/pi(+).
Resumo:
The Heavy Ion Research Facility and Cooling Storage Ring (HIRFL-CSR) accelerator in Lanzhou offers a unique possibility for the generation of high density and short pulse heavy ion beams by non-adiabatic bunch compression longitudinally, which is implemented by a fast jump of the RF-voltage amplitude. For this purpose, an RF cavity with high electric field gradient loaded with Magnetic Alloy cores has been developed. The results show that the resonant frequency range of the single-gap RF cavity is from 1.13 MHz to 1.42 MHz, and a maximum RF voltage of 40 kV with a total length of 100 cm can be obtained, which can be used to compress heavy ion beams of U-238(72+) with 250 MeV/u from the initial bunch length of 200 ns to 50 ns with the coaction of the two single-gap RF cavity mentioned above.
Resumo:
Helicon plasma source is known as efficient generator of uniform and high density plasma. A helicon plasma source was developed for investigation of plasma neutralization and plasma lens in the Institute of Modern Physics in China. In this paper, the characteristics of helicon plasma have been studied by using Langmuir four-probe and a high argon plasma density up to 3.9x10(13) cm(-3) have been achieved with the Nagoya type III antenna at the conditions of the magnetic intensity of 200 G, working gas pressure of 2.8x10(-3) Pa, and rf power of 1200 W with a frequency of 27.12 MHz. In the experiment, the important phenomena have been found: for a given magnetic induction intensity, the plasma density became greater with the increase in rf power and tended to saturation, and the helicon mode appeared at the rf power between 200 and 400 W.
Resumo:
The in medium nucleon-nucleon (N N) cross sections in isospin asymmetric nuclear matter at various densities are investigated in the frame work of Brueckner-Hartree-Fock theory with the Bonn B two-body nucleon-nucleon inter action supplemented with a new version microscopic three-body force (TBF). The TBF depresses the amplitude of cross sections at high density region. At low densities, the proton-proton and neutron-neutron cross sections decrease while the proton-neutron one increases as the asymmetry increases. But the sensitivity of the N N cross sections to the isospin a symmetry are reduced with the increasing density.
Resumo:
本文讨论了当前核物理的前沿问题之一,放射性核束物理中的对称能密度依赖性问题。首先讨论了对称能的概念、研究意义、对称能的研究现状及对称能的温度依赖性问题,其次讨论了重离子碰撞输运模拟的BUU方程,计算方法与计算技术,单粒子势和核子-核子散射截面,模拟科学与输运模型。然后重点给出了我们的研究成果,即,探测对称能高密行为的一些观测量。我们探讨了中心碰撞的pion-/pion+ ,同位旋相分化自由核子发射非对称度的快度分布、中快度自由核子发射的中-质比,径向流,横向流,质子椭圆流以及中-质微分椭圆流的对称能效应。研究了双n/p 、库仑峰附近的双pion-/pion+ 以及双中-质微分流对对称能高密行为的敏感性。讨论了双反应系统观测量对于减小库仑作用影响及系统误差的可适用性。指出了垂直于反应平面的挤压发射的n/p 和pion-/pion+,尤其是在高横动量时,对于探测对称能高密行为的高敏感性与较少地受低密核物质对称能影响的抗干扰性。还讨论了弱作用探针中能重离子碰撞中的硬光子发射问题,指出了丰中子、缺中子双反应系统的硬光子发射的能谱比不但敏感于对称能的高密行为,而且还几乎全部缩弱了光子产生截面、核子-核子散射截面的不确定性影响。研究了同位旋液汽相分化高能端汽相核子中-质比会小于液相核子中-质的反常现象,同时指出了反常液汽相变翻转能的对称能效应。国际同行的一些相关工作在本章末进行了讨论。最后,我们给出结论并就下一步关于模型和对称能高密行为的探针的工作方向进行了简要展望
Resumo:
通过田间试验研究了沙打旺、紫花苜蓿和达乌里胡枝子3种豆科牧草在黄土旱塬以不同密度单播、混播时的竞争生长能力及水分利用效率。单播时苜蓿生长次年3个密度的生产力分别为15349kg·hm-2、20582kg·hm-2、21531kg·hm-2,沙打旺和胡枝子3个密度的生产力分别为7979kg·hm-2、16 440 kg·hm-2、21055kg·hm-2和2412kg·hm-2、5270kg·hm-2、7102kg·hm-2。混播草地生产力以苜蓿+胡枝子最高(平均19227kg·hm-2),沙打旺与胡枝子混播的生产力最低(平均11977kg·hm-2)。和生产力较高的参混种苜蓿、沙打旺单播相比,苜蓿与沙打旺混播及沙打旺与胡枝子混播的生产力在3种密度下均有不同程度的降低。苜蓿主根下扎深度2m,0~60cm根系占总根量的66%,沙打旺和胡枝子根系最大下扎深度分别为1.8 m和1.5m,0~60cm根系占总根量比例分别是80%、91%。3种牧草中苜蓿的平均水分利用效率最高,为25.75kg·mm-1·hm-2,胡枝子最低为7.71kg·mm-1·hm-2,沙打旺居中。苜蓿群体种内个体间竞争强度高于沙打旺和胡枝子。结果...
Resumo:
以栽培一粒(2n)、栽培二粒(4n)和长武134(6n)为材料在大型活动防雨棚条件下研究不同倍性小麦材料在不同密度和水分条件下的产量适应性变化。结果发现,在两种水分条件下随着染色体倍性从2n→6n的增加,产量、千粒重、水分利用效率(WUE)和收获指数均呈增加趋势,在水分胁迫下各材料穗粒数和穗数则呈降低趋势,而在正常供水下穗粒数则呈增加趋势。在水分胁迫下栽培一粒、栽培二粒和长武134最高产量分别出现在中、低、高密度群体,而同一材料不同密度群体间变异系数分别为6.73%,1.98%,9.07%;不同倍性材料千粒重均随着密度增加而减小,而穗数则逐渐增加,二倍体的穗粒数以中密度最高,四倍体的穗粒数随着群体密度的增加而减小,六倍体则相反;三种材料WUE和收获指数分别以低、高、低密度最高。正常供水下随着染色体倍性从2n→6n的增加,三个倍性材料最高产量分别出现在高、低、低密度群体,而同一材料不同密度群体间变异系数分别为6.01%,17.12%,2.46%;千粒重表现为中密度>低密度>高密度,而穗粒数均以低密度群体最高,二倍体和四倍体以高密度群体最低,六倍体则以中密度群体最低,穗数则随着密度群体增加而增加;二倍体WUE以高...
Resumo:
在田间完全旱作条件下采用3个密度和2种播种方式观察了3种多年生豆科牧草生长第2年对土壤水分的消耗利用情况。结果表明:苜蓿主要耗水深度在2~3 m,最深可达5 m,其中、高密度处理3 m以上土壤水分含量都在稳定田间持水量之下,已经开始形成土壤下伏干层;沙打旺耗水深度在0~2 m,最低含水量(11.61%)处于80~100 cm,在雨季可以恢复到稳定田间持水量之上;达乌里胡枝子主要耗水深度在1 m以上,最低含水量也在稳定田间持水量之上。单播沙打旺、苜蓿和达乌里胡枝子全生长期内对土壤水分的消耗分别为249.9、180.2和136.6 mm,水分利用效率分别是29.39、26.04和8.91 kg.mm-1.hm-2。混播、加大播种密度都会增加3种牧草土壤水分消耗,降低土壤储水量,提高干草产量和水分利用效率,但影响程度因牧草种类、播种方式以及不同的生长时段而异。
Resumo:
This paper focuses on the problem of incomplete data in the applications of the circular cone-beam computed tomography. This problem is frequently encountered in medical imaging sciences and some other industrial imaging systems. For example, it is crucial when the high density region of objects can only be penetrated by X-rays in a limited angular range. As the projection data are only available in an angular range, the above mentioned incomplete data problem can be attributed to the limited angle problem, which is an ill-posed inverse problem. This paper reports a modified total variation minimisation method to reduce the data insufficiency in tomographic imaging. This proposed method is robust and efficient in the task of reconstruction by showing the convergence of the alternating minimisation method. The results demonstrate that this new reconstruction method brings reasonable performance. (C) 2010 Elsevier B.V. All rights reserved.
Resumo:
Combination of Ni2O3 and solid acid with Bronsted acid sites and Lewis acid sites (such as HZSM-5 and H-beta) could dramatically improve fire retardancy of polyolefin, including polypropylene and linear low-density polyethylene. This is mainly attributed to the formation of a large amount of residual char from degradation products of polyolefin in the intermediate stage of combustion. Thus, the amount of flammable components diffusing into the flame zone was small.
Resumo:
Biodegradable poly(e-caprolactone) (PCL) foams with a series of controlled structures were prepared by using chemical foaming method. The cell morphology was detected by scanning electron microscope (SEM). The compressive behavior of the foams was investigated by uniaxial compression test. The effect of density and structural parameters on the foam compressive behavior was analyzed. It was found that the relative compressive modulus has a power law relationship with relative density. Increasing of both the cell wall thickness and the cell density lead to higher compressive modulus of the foam; however, the cell size has no distinct effect on compressive behavior.