面向瘦客户机的嵌入式操作系统的研究

中国计算机学会

co-creativepen toolkit: a pen-based 3d toolkit for children cooperatly designing virtual environment

Co-CreativePen Toolkit is a pen-based 3D toolkit for children cooperatly designing virtual environment. This toolkit is used to construct different applications involved with distributedpen-based 3D interaction. In this toolkit,sketch method is encapsulated as kinds of interaction techniques. Children can use pen to construct 3D and IBR objects, to navigate in the virtual world, to select and manipulate virtual objects, and to communicate with other children. Children can use pen to select other children in the virtual world, and use pen to write message to children selected The distributed architecture of Co-CreativePen Toolkit is based on the CORBA. A common scene graph is managed in the server with several copies of this graph are managed in every client.Every changes of the scene graph in client will cause the change in the server and other client.

国际化标准框架下蒙文操作系统的设计

蒙文操作系统实现较为复杂的原因在于两个方面：①传统蒙文采用自顶向下竖写、每列从左向右排列的书写方式；②蒙文字符在不同文本上下文中采用变化相当复杂的显现字形．基于操作系统国际化体系结构，从蒙文字符集、蒙文字符的变形显现、蒙文文本的垂直显示、蒙文独特的图形用户界面等多个方面阐述了传统蒙文操作系统实现中面临的难点和技术方案；简要介绍了基于Qt／KDE桌面系统的实现；最后提出了蒙文操作系统实现仍需要解决的问题。

传统蒙古文变形显示机制研究与实现

多年来蒙古文处理系统重复开发、互不兼容的根本原因就是没有统一的标准:编码标准不统一、字库标准不统一、输入法不统一。随着国际化、多语言化的发展,开发基于ISO/IEC10646和UNICODE国际编码标准、OpenType智能字体技术的不同语言文字处理系统已经成为趋势。本文阐述了一个蒙古文显示系统,它完全支持Unicode标准并使用了OpenType技术自动进行字形选型,其实现是基于QT库的,但核心实现很容易移植到Pango,ICU等其他复杂文本布局(CTL)处理项目中。

基于ISO/IEC10646标准的藏文操作系统若干问题研究

长期以来尚未有完整的藏文操作系统,原因是藏文文字的特性要求特定的文字处理。本文基于ISO/IEC10646的藏文字符集标准,结合藏文正字法要求,详细分析了藏文操作系统实现中的关键问题:(1)藏文字符集方案比较与藏文存储;(2)藏文输入;(3)藏文显现。藏文显现是公认的“瓶颈”问题。对此,本文提出基于音节划分、使用OpenType字体及相应的文本引擎来解决藏文“叠加”字符的显现。此方案应用于Qt库的实验及相关测试证明基于ISO/IEC10646标准的藏文操作系统实现是较合理的方案。

藏文编码字符集的扩充集在Linux上的实现

国内藏文软件开发普遍使用的是基于垂直预组合字符的实现方案,但是缺乏统一的编码标准.藏文编码字符集扩充集的推出,对于国内藏文软件的标准化、国际化具有重要意义.本文通过分析ISO/IEC 10646藏文编码字符集基本集、藏文编码字符集扩充集国家标准,区分它们描述字丁的差异,分析由编码方案所导致的实现上的关键问题.最后,针对藏文扩充集B的特殊性,提出并实现了基于Linux国际化架构下支持藏文扩充集标准的解决方案.

RBS STUDIES OF THE LATTICE DAMAGE CAUSED BY 1 MEV SI+ IMPLANTATION INTO AL0.3GA0.7AS/GAAS SUPERLATTICES AT ELEVATED-TEMPERATURE

The lattice damage accumulation in GaAs and Al0.3Ga0.7As/GaAs superlattices by 1 MeV Si+ irradiation at room temperature and 350-degrees-C has been studied. For irradiations at 350-degrees-C, at lower doses the samples were almost defect-free after irradiation, while a large density of accumulated defects was induced at a higher dose. The critical dose above which the damage accumulation is more efficient is estimated to be 2 x 10(15) Si/cm2 for GaAs, and is 5 x 10(15) Si/cm2 for Al0.8Ga0.7As/GaAs superlattice for implantation with 1.0 MeV Si ions at 350-degrees-C. The damage accumulation rate for 1 MeV Si ion implantation in Al0.3Ga0.7As/GaAs superlattice is less than that in GaAs.

Surface Initiated Polymerization from Substrates of Low Initiator Density and Its Applications in Biosensors

Surface initiated polymerization (SIP) has become an attractive method for tailoring physical and chemical properties of surfaces for a broad range of applications. Most of those application relied on the merit of a high density coating. In this study we explored a long overlooked field of SIP. SIP from substrates of low initiator density. We combined ellipsometry with AFM to investigate the effect of initiatior density and polymerization time on the morphology of polymer coatings. In addition, we carefully adjusted the nanoscale separation of polymer chains to achieve a balance between nonfouling and immobilization capacities. We further tested the performance of those coating on various biosensors, such as quartz crystal microbalance, surface plasmon resonance, and protein microarrays. The optimized matrices enhanced the performance of those biosensors. This report shall encourage researches to explore new frontiers in SIP that go beyond polymer brushes.

Quartz crystal microbalance study of the kinetics of surface initiated polymerization

Surface initiated polymerization (SIP) is a valuable tool in synthesizing functional polymer brushes, yet the kinetic understanding of SIP lags behind the development of its application. We apply quartz crystal microbalance (QCM) to address two issues that are not fully addressed yet play a central role in the rational design of functional polymer brushes, namely quantitative determination of the kinetics and the initiator efficiency (IE) of SIP. SIP are monitored online using QCM. Two quantitative frequency-thickness (f-T) relations make the direct determination and comparison of the rate of polymerization possible even for different monomers. Based on the bi-termination model, the kinetics of SIP is simply described by two variables, which are related to two polymerization constants, namely a = 1/(k (p,s,app)-[M][R center dot](0)) and b = k (t,s,app)/(k (p,s,app)[M]). Factors that could alter the kinetics of SIP are studied, including (i) the molecular weight of monomers, (ii) the solvent used, (iii) the initial density of the initiator, (iv) the concentration of monomer, [M], and (v) the catalyst system (ratio among the ingredients, metal, ligands, and additives). The dynamic nature of IE is also described by these two variables, IE = a/(a + bt). Instead of the molecular weight and the polydispersity, we suggest that film thickness, the two kinetic parameters (a and b), and the initial density of the initiator and IE be the parameters that characterize ultra-thin polymer brushes. Besides the kinetics study of SIP, the reported method has many other applications, for example, in the fast screening of catalyst system for SIP and other polymerization systems.

离子源分布式控制系统设计

将NI公司的可编程自动化控制器(PAC)CompactFieldPoint应用于离子源系统控制中,可充分发其易于使用、可扩展性强、可重用度高以及具有实时的运载软件的平台,结合稳定的I/O模块实现ECR离子源的分布式网络系统控制。使用PID控制算法控制定标参量;并通过远程面板技术,用户通过本地(Client端)计算机打开并操作位于远程(WebServer端)上的VI前面板,实现了测试数据的远程共享和用户对系统的远程操控。

Quasi-Elastic Scattering of C-16 from C-12 at 47.5 MeV/Nucleon

Differential cross sections for the quasi-elastic scattering of C-16 at 47.5 MeV/nucleon from C-12 target are measured. Coupled-channels calculations are carried out and the optical potential parameters are obtained by fitting the experimental angular distribution.

Elastic Scattering of He-6 + p at 82.3 MeV/nucleon

Differential cross sections for the elastic scattering of halo nucleus He-6 on proton target were measured at 82.3 MeV/u. The experimental results are well reproduced by optical model calculations using global potential KD02 with a reduction of the depth of real volume part by a factor of 0.7. A systematic analysis shows that this behavior might be related to the weakly bound property of unstable nuclei.

自助银行集成应用系统CSBS

本文全面地论述了自助银行集成应用系统(CSBS)的研制开发及这一系统的结构、性能和软硬件特色。论文前一部分阐明了系统的开发背景，系统模型的建立，整体的系统结构（包括详细的软硬件设计）；接着从系统应用方面给出了一个使用说明；然后从系统的可靠性及系统的应用性能方面进行了总结以及介绍本人具体完成的工作；最后一部分探讨了一个解决银行业务系统安全的方案。CSBS自助银行集成应用系统是一个从事金融业务的专用系统，采用Client/Server软件结构，涉及终端通讯技术、磁卡技术、IC卡技术、打印技术，安全加密技术等许多硬件及软件技术。CSBS自助银行集成应用系统是一项完全依靠自身技术进行开发的高新技术项目，其功能超过国外同类系统，价格低于国外同类产品，使用存折、储蓄卡、信用卡、IC卡实现银行服务业务，具有明显的市场效益和应用前景。

Nonadiabatic photodissociation dynamics

The photodissociation dynamics of the triatomic (or pseudo-triatomic) system in the nonadiabatic multiple electronic states is investigated by employing a time-dependent quantum wavepacket method, while the time propagation of the wave packet is carried out using the split-operator scheme. As a numerical example, the photodissociation dynamics of CH,l in three electronic states (1)Q(1)(A'), (1)Q(1)(A"), and (3)Q(0+) is studied and CH3I is treated as a pseudotriatomic model. The absorption spectra and product vibrational state distributions are calculated and compared with previous theoretical work. (C) 2004 Wiley Periodicals, Inc.

Theoretical study on the formation mechanism of Iso-CH2I-Cl

The dissociation and isomerization reaction mechanism on the ground-state potential energy surface for CH2ClI are investigated by ab initio calculations. It is found that the isomer iso-CH2I-Cl can be produced from either the recombination of the photodissociation. fragments or the isomerization reaction of CH2ClI, rather than from isomerization reaction of iso-CH2Cl-I. Further explanations of experimental results are also presented. (C) 2003 Wiley Periodicals, Inc.