Effect of mangiferin on the development of periodontal disease: Involvement of lipoxin A(4), anti-chemotaxic action in leukocyte rolling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Atividade antimicrobiana de própolis de Apis mellifera obtidas em três regiões do Brasil

As propriedades biológicas da própolis de Apis mellifera são amplamente relatadas sendo comuns variações nas mesmas em função da região onde foram produzidas. A ação antimicrobiana de própolis obtidas em três regiões do Brasil (Botucatu-SP, Mossoró-RN e Urubici-SC) foi investigada sobre linhagens isoladas de infecções clínicas humanas (Staphylococcus aureus, Escherichia coli, Enterococcus sp, Pseudomonas aeruginosa e Candida albicans). Foram preparados extratos alcoólicos de própolis (EAP) e determinada a Concentração Inibitória Mínima (CIM) seguida do cálculo da CIM90%. A própolis de Botucatu foi a mais eficiente sobre S. aureus (0,3%v/v), Enterococcus sp (1,1%v/v) e C. albicans (2,1% v/v). Para E. coli, a própolis eficiente foi de Urubici (7,0%v/v) e para P. aeruginosa a de Mossoró (5,3%v/v). Os resultados mostram maior sensibilidade das bactérias Gram positivas e levedura em relação às Gram negativas. É possível concluir que, para os microrganismos testados e amostras de própolis testadas, há diferenças na atividade antimicrobiana em função do local de produção e que isso se explica pela diferença de composição química da própolis.

Qualidade de couve-chinesa minimamente processada e tratada com diferentes produtos

O objetivo deste trabalho foi avaliar a qualidade de couve-chinesa minimamente processada e tratada com cloreto de cálcio (CaCl2), ácido ascórbico (vitamina C), ácido etileno-diamino-tetracético (EDTA) e mantida sob refrigeração. Foram realizados os seguintes tratamentos: T1: testemunha (imersão em água contendo 50 mg L-1 clorin/5 minutos); T2: imersão em solução contendo CaCl2 a 1%/5 minutos; T3: imersão em solução contendo CaCl2 a 2%/5 minutos; T4: imersão em solução contendo vitamina C a 1%/5 minutos; T5: imersão em solução contendo Vitamina C a 2%/5 minutos; T6: imersão em solução contendo EDTA a 1%/5 minutos; e T7: imersão em solução contendo EDTA a 2%/5 minutos. Após a realização dos tratamentos a couve-chinesa foi centrifugada, embalada em bandejas de polietileno expandido, recoberta com policloreto de vinila (PVC) e armazenada em temperatura de 5 ± 1 °C e umidade relativa (UR) de 90 ± 2% por 8 dias. As análises físico-químicas, químicas e sensoriais foram realizadas de dois em dois dias. A presença de Salmonella foi verificada somente após a realização dos tratamentos. A partir dos resultados obtidos procedeu-se à análise de variância (ANAVA) e aplicou-se o teste de Tukey considerando-se um nível de significância p < 0,05. Houve influência significativa dos diferentes tratamentos nas características físico-químicas e químicas, como também nas avaliações da aparência geral e escurecimento. Não foi detectada presença de Salmonella em nenhum dos tratamentos realizados. de acordo com os resultados obtidos conclui-se que a couve-chinesa minimamente processada nas condições experimentais utilizadas só estaria apta para o consumo até o quarto dia de armazenamento.

Production and characterization of cellulase-free xylanase from Trichoderma inhamatum

The production of extracellular cellulase-free xylanase from Trichoderma inhamatum was evaluated in liquid Vogel medium with different carbon sources as natural substrates and agricultural or agro-industrial wastes. Optimal production of 244.02 U/mL was obtained with xylan as carbon source, pH 6.0 at 25 degrees C, 120 rpm, and 60-h time culture. Optimal conditions for enzyme activity were 50 degrees C and pH 5.5. Thermal stability of T. inhamatum xylanolytic complex expressed as T(1/2) was 2.2 h at 40 degrees C and 2 min at 50 degrees C. The pH stability was high from 4.0 to 11.0.These results indicate possible employment of such enzymatic complex in some industrial processes which require activity in acid pH, wide-ranging pH stability, and cellulase activity absence.

Biologia populacional de Cyphocarax modestus (Osteichthyes, Curimatidae) no córrego Ribeirão Claro, município de Rio Claro (SP)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biologia populacional de Cyphocarax modestus no córrego Ribeirão Claro, município de Rio Claro (SP)

This work aimed a better understanding of the annual cycle of Cyphocarax modestus in the reservoir of water captation of Ribeirao Claro stream. The growth parameters were estimated through the analysis of length distribution and the relationships among time of smaller growth, alimentary activity, fat accumulation and reproductive period were considered. Besides, the instantaneous rate of natural mortality was calculated. Monthly samplings were accomplished in the Ribeirao Claro stream, in the reservoir of water captation of Rio Claro city. For that, 50 m of wait net was used, with meshes of 1.5, 2.0, 2.5, 3.0 and 3.5 cm measured between adjacent knots. The ELEFAN I program was used to estimate the growth parameters, and its application was done using the FISAT program. It was also used the seasonal version of von Bertalanffy's growth curve. It was considered that the reproduction of C. modestus is annual and concentrated from December to February, allowing the identification of different modas in the distributions, an essential condition for the conduction of that analysis type. The estimated parameters were: K = 0.34/year, L [infinity] = 15.40 cm, C = 0.2, Wp = 0.6 and M = 0.949/year, with the identification of four cohorts. The physiologic sequence in the annual cycle of the specie could be noted when data of accumulated fat in the visceral cavity, alimentary activity, reproduction time and time of smaller growth were analyzed together. It was noted that with the beginning of the maturation of gonads, the energy resources stopped being invested in the growth and passed to be used for reproduction.

Asymptotics of zeros of polynomials arising from rational integrals

We prove that the zeros of the polynomials P.. (a) of degree m, defined by Boros and Moll via[GRAPHICS]approach the lemmiscate {zeta epsilon C: \zeta(2) - 1\ = Hzeta < 0}, as m --> infinity. (C) 2004 Elsevier B.V. All rights reserved.

BASIC HYPERGEOMETRIC FUNCTIONS and ORTHOGONAL LAURENT POLYNOMIALS

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fullerene and omega-3 and omega-6 fatty acids on fish brain antioxidant status

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

INTRAPULPAL TEMPERATURE VARIATION DURING BLEACHING WITH VARIOUS ACTIVATION MECHANISMS

Objectives: The aim of this study was to evaluate the intrapulpal temperature variation after bleaching treatment with 35% hydrogen peroxide using different sources of activation. Material and Methods: Twenty-four human teeth were sectioned in the mesiodistal direction providing 48 specimens, and were divided into 4 groups (n=12): (G1) Control - Bleaching gel without light activation, (G2) Bleaching gel + halogen light, (G3) Bleaching gel + LED, (G4) Bleaching gel + Nd: YAG Laser. The temperatures were recorded using a digital thermometer at 4 time points: before bleaching gel application, 1 min after bleaching gel application, during activation of the bleaching gel, and after the bleaching agent turned from a dark-red into a clear gel. Data were analyzed statistically by the Dunnet's test, ANOVA and Tukey's test (alpha=0.05). Results: The mean intrapulpal temperature values (degrees C) in the groups were: G1: 0.617 +/- 0.41; G2: 1.800 +/- 0.68; G3: 0.975 +/- 0.51; and G4: 4.325 +/- 1.09. The mean maximum temperature variation (MTV) values were: 1.5 degrees C (G1), 2.9 degrees C (G2), 1.7 degrees C (G3) and 6.9 degrees C (G4). When comparing the experimental groups to the control group, G3 was not statistically different from G1 (p>0.05), but G2 and G4 presented significantly higher (p<0.05) intrapulpal temperatures and MTV. The three experimental groups differed significantly (p<0.05) from each other. Conclusions: The Nd: YAG laser was the activation method that presented the highest values of intrapulpal temperature variation when compared with LED and halogen light. The group activated by LED light presented the lowest values of temperature variation, which were similar to that of the control group.

Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols

Objectives. This study characterized the feldspathic ceramic surfaces after various silanization protocols.Methods. Ceramic bars (2 mm x 4 mm x 10 mm) (N = 18) of feldpathic ceramic (VM7, VITA Zahnfabrik) were manufactured and finished. Before silane application, the specimens were ultrasonically cleaned in distilled water for 10 min. The ceramic specimens were randomly divided into nine groups (N = 2 per group) and were treated with different silane protocols. MPS silane (ESPE-Sil, 3M ESPE) was applied to all specimens and left to react at 20 degrees C for 2 min (G20). After drying, the specimens were subjected to heat treatment in an oven at 38 degrees C (G38), 79 degrees C (G79) or 100 degrees C (G100) for 1 min. Half of the specimens of each group were rinsed with water at 80 degrees C for 15 s (G20B, G38B, G79B, G100B). The control group (GC) received no silane. Attenuated total reflection infrared Fourier transform analysis (ATR FT-IR) was performed using a spectrometer. Thickness of silane layer was measured using a spectroscopic ellip-someter working in the lambda = 632.8 nm (He-Ne laser) at 70 degrees incidence angle. Surface roughness was evaluated using an optical profilometer. Specimens were further analyzed under the Scanning Electron Microscopy (SEM) to observe the topographic patterns.Results. ATR FT-IR analysis showed changes in Si-O peaks with enlarged bands around 940 cm(-1). Ellipsometry measurements showed that all post-heat treatment actions reduced the silane film thickness (30.8-33.5 nm) compared to G20 (40 nm). The groups submitted to rinsing in hot water (B groups) showed thinner silane films (9.8-14.4 nm) than those of their corresponding groups (without washing) (30.8-40 nm). Profilometer analysis showed that heat treatments (Ra approximate to 0.10-0.19 mu m; Rq approximate to 0.15-0.26 mu m) provided a smoother surface than the control group (Ra approximate to 0.48 mu m; Rq approximate to 0.65 mu m). Similar patterns were also observed in SEM images.Significance. Heat treatment after MPS silane application improved the silane layer network. Rinsing with boiling water eliminated the outmost unreacted regions of the silane yielding to thinner film thicknesses. (C) 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Synthesis of (Ca,Nd)TiO3 powders by complex polymerization, Rietveld refinement and optical properties

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Structural and dielectric characterization of praseodymium-modified lead titanate ceramics synthesized by the OPM route

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dielectric properties of Ca(Zr0.05Ti0.95)O-3 thin films prepared by chemical solution deposition

Ca(Zr0.05Ti0.95)O-3 (CZT) thin films were grown on Pt(1 1 1)/Ti/SiO2/Si(1 0 0) substrates by the soft chemical method. The films were deposited from spin-coating technique and annealed at 928 K for 4 h under oxygen atmosphere. CZT films present orthorhombic structure with a crack free and granular microstructure. Atomic force microscopy and field-emission scanning electron microscopy showed that CZT present grains with about 47 nm and thickness about 450 nm. Dielectric constant and dielectric loss of the films was approximately 210 at 100 kHz and 0.032 at 1 MHz. The Au/CZT/Pt capacitor shows a hysteresis loop with remnant polarization of 2.5 mu C/cm(2), and coercive field of 18 kV/cm, at an applied voltage of 6 V. The leakage current density was about 4.6 x 10(-8) A/cm(2) at 3 V. Dielectric constant-voltage curve is located at zero bias field suggesting the absence of internal electric fields. (c) 2006 Elsevier B.V. All rights reserved.

Synthesis and characterization of CaBi4Ti4O15 thin films annealed by microwave and conventional furnaces

CaBi4Ti4O15 thin films were deposited by the polymeric precursor method and crystallized in a domestic microwave oven and conventional furnace. The films obtained for microwave energy are well-adhered, homogeneous and with good specularity, when treated at 700 degrees C for 10 min. The microstructure and the structure of the films can be tuned by adjusting the crystallization conditions. When microwave oven is employed, the films presented bigger grains with mean grain size around 80 nm. For comparison, films were also prepared by the conventional furnace at 700 degrees C for 2 h. (C) 2007 Elsevier Masson SAS. All rights reserved.