Evolução temporal da prevalência de anemia em adolescentes grávidas de uma maternidade pública do Rio de Janeiro

OBJETIVO: Descrever a evolução temporal da prevalência de anemia em adolescentes grávidas atendidas em uma maternidade pública do município do Rio de Janeiro no período de 2004 a 2013. MÉTODOS: Trata-se de um estudo analítico transversal retrospectivo com 628 gestantes/puérperas adolescentes, distribuídas em 3 grupos distintos: Grupo A (2004 a 2006), Grupo B (2007 a 2010) e Grupo C (2013). Informações relativas às características antropométricas, clínicas, sociodemográficas, obstétricas e da assistência pré-natal das adolescentes foram obtidas dos prontuários das gestantes. A concentração de hemoglobina (Hb) <11 g/dL foi considerada como anemia. A análise dos dados foi realizada por meio dos testes do χ2, t de Student e ANOVA, e o post hoc adotado foi o Tukey. RESULTADOS: A prevalência de anemia gestacional ao longo dos anos foi de 43% (GA=138), 36% (GB=80) e 47,1% (GC=40), e no período de 2004 a 2013 foi de 41,1% (n=258). A ocorrência de gestantes anêmicas aumentou com a evolução da gravidez; contudo, no 3º trimestre foi observada uma redução da prevalência de anemia no GB (29,3%) em relação ao GA (38,7%; p=0,04). Os fatores associados à anemia foram número de consultas de pré-natal e da assistência nutricional pré-natal, local de moradia, estado nutricional nos períodos pré-gestacional e gestacional. CONCLUSÃO: Os resultados sugerem que a prevalência de anemia em adolescentes grávidas atendidas na referida maternidade foi alta. Não foi verificada redução da anemia ao longo do período estudado, e na gênese da anemia nessa população outros fatores estão associados, além da própria deficiência de ferro.

Clinical aspects and dynamics of auricular parasitosis in Gir cattle

We evaluated the dynamics of ear infestations caused by Rhabditis spp. and Raillietia spp., which were correlated with animal age, intensity of clinical signs and climate factors. Sixty-four Gir cattle were distributed into three groups: GA - 23 calves with 4 to 6 months of age; GB - 18 calves with 7 to 12 months of age; and GC - 23 heifers with 13 to 33 months of age. Five samplings, defined as S1, S2, S3, S4 and S5 were performed every three months from August 2008 to August 2009. The ear secretion was collected using the auricular washing method for the right ear and a swab for the left ear. A clinical assessment of the animals was performed, and they were classified according to the presence and severity of otitis. The highest relative frequency of rhabditosis was 52.2% in GC at the last sampling. In the first sampling, 42.2% of the animals were infested by Raillietia spp. The older cattle were more susceptible to infestations by both parasites. No correlation of Rhabditis spp. and Raillietia spp. parasitism with climate factors was found. The results showed that both parasites could infest Gir cattle, and in most cases, there was no co-infestation. Only older animals parasitized by the nematode showed clinical signs of the disease.

Characterisation of waste for combustion : with special reference to the role of zinc

Waste combustion has gone from being a volume reducing discarding-method to an energy recovery process for unwanted material that cannot be reused or recycled. Different fractions of waste are used as fuel today, such as; municipal solid waste, refuse derived fuel, and solid recovered fuel. Furthermore, industrial waste, normally a mixture between commercial waste and building and demolition waste, is common, either as separate fuels or mixed with, for example, municipal solid waste. Compared to fossil or biomass fuels, waste mixtures are extremely heterogeneous, making it a complicated fuel. Differences in calorific values, ash content, moisture content, and changing levels of elements, such as Cl and alkali metals, are common in waste fuel. Moreover, waste contains much higher levels of troublesome trace elements, such as Zn, which is thought to accelerate a corrosion process. Varying fuel quality can be strenuous on the boiler system and may cause fouling and corrosion of heat exchanger surfaces. This thesis examines waste fuels and waste combustion from different angles, with the objective of giving a better understanding of waste as an important fuel in today’s fuel economy. Several chemical characterisation campaigns of waste fuels over longer time periods (10-12 months) was used to determine the fossil content of Swedish waste fuels, to investigate possible seasonal variations, and to study the presence of Zn in waste. Data from the characterisation campaigns were used for thermodynamic equilibrium calculations to follow trends and determine the effect of changing concentrations of various elements. The thesis also includes a study of the thermal behaviour of Zn and a full—scale study of how the bed temperature affects the volatilisation of alkali metals and Zn from the fuel. As mixed waste fuel contains considerable amounts of fresh biomass, such as wood, food waste, paper etc. it would be wrong to classify it as a fossil fuel. When Sweden introduced waste combustion as a part of the European Union emission trading system in the beginning of 2013 there was a need for combustion plants to find a usable and reliable method to determine the fossil content. Four different methods were studied in full-scale of seven combustion plants; 14Canalysis of solid waste, 14C-analysis of flue gas, sorting analysis followed by calculations, and a patented balance method that is using a software program to calculate the fossil content based on parameters from the plant. The study showed that approximately one third of the coal in Swedish waste mixtures has fossil origins and presented the plants with information about the four different methods and their advantages and disadvantages. Characterisation campaigns also showed that industrial waste contain higher levels of trace elements, such as Zn. The content of Zn in Swedish waste fuels was determined to be approximately 800 mg kg-1 on average, based on 42 samples of solid waste from seven different plants with varying mixtures between municipal solid waste and industrial waste. A review study of the occurrence of Zn in fuels confirmed that the highest amounts of Zn are present in waste fuels rather than in fossil or biomass fuels. In tires, Zn is used as a vulcanizing agent and can reach concentration values of 9600-16800 mg kg-1. Waste Electrical and Electronic Equipment is the second Zn-richest fuel and even though on average Zn content is around 4000 mg kg-1, the values of over 19000 mg kg-1 were also reported. The increased amounts of Zn, 3000-4000 mg kg-1, are also found in municipal solid waste, sludge with over 2000 mg kg-1 on average (some exceptions up to 49000 mg kg-1), and other waste derived fuels (over 1000 mg kg-1). Zn is also found in fossil fuels. In coal, the average level of Zn is 100 mg kg-1, the higher amount of Zn was only reported for oil shale with values between 20-2680 mg kg-1. The content of Zn in biomass is basically determined by its natural occurrence and it is typically 10-100 mg kg-1. The thermal behaviour of Zn is of importance to understand the possible reactions taking place in the boiler. By using thermal analysis three common Zn-compounds were studied (ZnCl2, ZnSO4, and ZnO) and compared to phase diagrams produced with thermodynamic equilibrium calculations. The results of the study suggest that ZnCl2(s/l) cannot exist readily in the boiler due to its volatility at high temperatures and its conversion to ZnO in oxidising conditions. Also, ZnSO4 decomposes around 680°C, while ZnO is relatively stable in the temperature range prevailing in the boiler. Furthermore, by exposing ZnO to HCl in a hot environment (240-330°C) it was shown that chlorination of ZnO with HCl gas is possible. Waste fuel containing high levels of elements known to be corrosive, for example, Na and K in combination with Cl, and also significant amounts of trace elements, such as Zn, are demanding on the whole boiler system. A full-scale study of how the volatilisation of Na, K, and Zn is affected by the bed temperature in a fluidised bed boiler was performed parallel with a lab-scale study with the same conditions. The study showed that the fouling rate on deposit probes were decreased by 20 % when the bed temperature was decreased from 870°C to below 720°C. In addition, the lab-scale experiments clearly indicated that the amount of alkali metals and Zn volatilised depends on the reactor temperature.

Hydrometallurgical recovery of valuable metals from secondary raw materials

Wastes and side streams in the mining industry and different anthropogenic wastes often contain valuable metals in such concentrations their recovery may be economically viable. These raw materials are collectively called secondary raw materials. The recovery of metals from these materials is also environmentally favorable, since many of the metals, for example heavy metals, are hazardous to the environment. This has been noticed in legislative bodies, and strict regulations for handling both mining and anthropogenic wastes have been developed, mainly in the last decade. In the mining and metallurgy industry, important secondary raw materials include, for example, steelmaking dusts (recoverable metals e.g. Zn and Mo), zinc plant residues (Ag, Au, Ga, Ge, In) and waste slurry from Bayer process alumina production (Ga, REE, Ti, V). From anthropogenic wastes, waste electrical and electronic equipment (WEEE), among them LCD screens and fluorescent lamps, are clearly the most important from a metals recovery point of view. Metals that are commonly recovered from WEEE include, for example, Ag, Au, Cu, Pd and Pt. In LCD screens indium, and in fluorescent lamps, REEs, are possible target metals. Hydrometallurgical processing routes are highly suitable for the treatment of complex and/or low grade raw materials, as secondary raw materials often are. These solid or liquid raw materials often contain large amounts of base metals, for example. Thus, in order to recover valuable metals, with small concentrations, highly selective separation methods, such as hydrometallurgical routes, are needed. In addition, hydrometallurgical processes are also seen as more environmental friendly, and they have lower energy consumption, when compared to pyrometallurgical processes. In this thesis, solvent extraction and ion exchange are the most important hydrometallurgical separation methods studied. Solvent extraction is a mainstream unit operation in the metallurgical industry for all kinds of metals, but for ion exchange, practical applications are not as widespread. However, ion exchange is known to be particularly suitable for dilute feed solutions and complex separation tasks, which makes it a viable option, especially for processing secondary raw materials. Recovering valuable metals was studied with five different raw materials, which included liquid and solid side streams from metallurgical industries and WEEE. Recovery of high purity (99.7%) In, from LCD screens, was achieved by leaching with H2SO4, extracting In and Sn to D2EHPA, and selectively stripping In to HCl. In was also concentrated in the solvent extraction stage from 44 mg/L to 6.5 g/L. Ge was recovered as a side product from two different base metal process liquors with Nmethylglucamine functional chelating ion exchange resin (IRA-743). Based on equilibrium and dynamic modeling, a mechanism for this moderately complex adsorption process was suggested. Eu and Y were leached with high yields (91 and 83%) by 2 M H2SO4 from a fluorescent lamp precipitate of waste treatment plant. The waste also contained significant amounts of other REEs such as Gd and Tb, but these were not leached with common mineral acids in ambient conditions. Zn was selectively leached over Fe from steelmaking dusts with a controlled acidic leaching method, in which the pH did not go below, but was held close as possible to, 3. Mo was also present in the other studied dust, and was leached with pure water more effectively than with the acidic methods. Good yield and selectivity in the solvent extraction of Zn was achieved by D2EHPA. However, Fe needs to be eliminated in advance, either by the controlled leaching method or, for example, by precipitation. 100% Pure Mo/Cr product was achieved with quaternary ammonium salt (Aliquat 336) directly from the water leachate, without pH adjustment (pH 13.7). A Mo/Cr mixture was also obtained from H2SO4 leachates with hydroxyoxime LIX 84-I and trioctylamine (TOA), but the purities were 70% at most. However with Aliquat 336, again an over 99% pure mixture was obtained. High selectivity for Mo over Cr was not achieved with any of the studied reagents. Ag-NaCl solution was purified from divalent impurity metals by aminomethylphosphonium functional Lewatit TP-260 ion exchange resin. A novel preconditioning method, named controlled partial neutralization, with conjugate bases of weak organic acids, was used to control the pH in the column to avoid capacity losses or precipitations. Counter-current SMB was shown to be a better process configuration than either batch column operation or the cross-current operation conventionally used in the metallurgical industry. The raw materials used in this thesis were also evaluated from an economic point of view, and the precipitate from a waste fluorescent lamp treatment process was clearly shown to be the most promising.

Aspectos fitossociológicos da comunidade de plantas daninhas na cultura do feijão sob diferentes sistemas de preparo do solo

Avaliou-se, neste trabalho, os efeitos de sistemas de preparo do solo: [(plantio direto (PD), arado de discos (AD), arado de aivecas (AA), grade aradora (GA), grade aradora+arado de discos (GA+AD) e grade aradora+arado de aivecas (GA+AA)] sobre a comunidade de plantas daninhas da cultura do feijão. Este experimento foi desenvolvido em área onde os diferentes sistemas de preparo do solo estavam sendo avaliados desde 1985. Todavia, os resultados aqui apresentados são referentes apenas à safra 2000/2001. Neste ensaio, as parcelas foram subdivididas pela aplicação ou não de herbicidas em pós-emergência. As plantas daninhas presentes na área experimental foram separadas por espécie, classificadas, secadas e pesadas, sendo analisadas segundo a sua importância relativa dentro da comunidade, através dos índices fitossociológicos de densidade, freqüência e dominância. A aplicação de herbicidas em pós-emergência diminuiu a biomassa total das plantas daninhas, e esse efeito foi independente do sistema de preparo. Os sistemas de preparo do solo e a aplicação de herbicida em pós-emergência alteraram a importância relativa das plantas daninhas dentro da comunidade. As espécies que apresentaram maior importância foram Cyperus rotundus, nos tratamentos com preparo convencional do solo, e Galinsoga parviflora, no plantio direto.

Efeito do ácido giberélico e diferentes aminoácidos sobre as atividades da sintetase da glutamina e sintase do glutamato e sobre o crescimento de frutos de soja

O trabalho teve como objetivo avaliar o efeito de diferentes aminoácidos e do ácido giberélico (GA) sobre a atividade da glutamina sintetase (GS) e da glutamato sintase (GOGAT) e o crescimento de frutos de soja. Frutos imaturos foram cultivados com diferentes concentrações de paclobutrazol (PBZ), inibidor da biossíntese de giberelinas, o qual inibiu o crescimento dos frutos em até 80%. Em seguida foi avaliado o efeito do GA sobre o crescimento dos frutos de soja cultivados com PBZ. O regulador de crescimento restabeleceu o crescimento dos frutos cultivados com 0,034 mM de PBZ. Entretanto, com 0,85 mM de PBZ não se obteve o mesmo efeito positivo, indicando um possível nível fitotóxico. Posteriormente os frutos foram cultivados durante oito dias com glutamina, asparagina ou alantoína, na presença ou não de GA, após o que determinaram-se as atividades enzimáticas. As enzimas de assimilação do nitrogênio foram mais ativas na presença da alantoína. O GA inibiu a atividade da GS e estimulou as da Fd-GOGAT e da NADH-GOGAT. A atividade da Fd-GOGAT foi superior à da NADH-GOGAT, talvez devido à ferredoxina reduzida presente nos frutos cultivados sob iluminação constante, advinda da atividade fotossintética. Os resultados obtidos permitem concluir que giberelinas, provavelmente, estão envolvidas no crescimento de frutos imaturos de soja e na regulação da atividade das enzimas GS e GOGAT nesses frutos.

The interplay of JNK and SCG10 during cortical development and in excitotoxic responses in brain

Initially identified as stress activated protein kinases (SAPKs), the c-Jun Nterminal kinases (JNKs) are currently accepted as potent regulators of various physiologically important cellular events. Named after their competence to phosphorylate transcription factor c-Jun in response to UVtreatment, JNKs play a key role in cell proliferation, cell death or cell migration. Interestingly, these functions are crucial for proper brain formation. The family consists of three JNK isoforms, JNK1, JNK2 and JNK3. Unlike brain specific JNK3 isoform, JNK1 and JNK2 are ubiquitously expressed. It is estimated that ten splice variants exist. However, the detailed cellular functions of these remain undetermined. In addition, physiological conditions keep the activities of JNK2 and JNK3 low in comparison with JNK1, whereas cellular stress raises the activity of these isoforms dramatically. Importantly, JNK1 activity is constitutively high in neurons, yet it does not stimulate cell death. This suggests a valuable role for JNK1 in brain development, but also as an important mediator of cell wellbeing. The aim of this thesis was to characterize the functional relationship between JNK1 and SCG10. We found that SCG10 is a bona fide target for JNK. By employing differential centrifugation we showed that SCG10 co-localized with active JNK, MKK7 and JIP1 in a fraction containing endosomes and Golgi vesicles. Investigation of JNK knockout tissues using phosphospecific antibodies recognizing JNK-specific phosphorylation sites on SCG10 (Ser 62/Ser 73) showed that phosphorylation of endogenous SCG10 was dramatically decreased in Jnk1-/- brains. Moreover, we found that JNK and SCG10 co-express during early embryonic days in brain regions that undergo extensive neuronal migration. Our study revealed that selective inhibition of JNK in the cytoplasm significantly increased both the frequency of exit from the multipolar stage and radial migration rate. However, as a consequence, it led to ill-defined cellular organization. Furthermore, we found that multipolar exit and radial migration in Jnk1 deficient mice can be connected to changes in phosphorylation state of SCG10. Also, the expression of a pseudo-phosphorylated mutant form of SCG10, mimicking the JNK1- phopshorylated form, brings migration rate back to normal in Jnk1 knockout mouse embryos. Furthermore, we investigated the role of SCG10 and JNK in regulation of Golgi apparatus (GA) biogenesis and whether pathological JNK action could be discernible by its deregulation. We found that SCG10 maintains GA integrity as with the absence of SCG10 neurons present more compact fragmented GA structure, as shown by the knockdown approach. Interestingly, neurons isolated from Jnk1-/- mice show similar characteristics. Block of ER to GA is believed to be involved in development of Parkinson's disease. Hence, by using a pharmacological approach (Brefeldin A treatment), we showed that GA recovery is delayed upon removal of the drug in Jnk1-/- neurons to an extent similar to the shRNA SCG10-treated cells. Finally, we investigated the role of the JNK1-SCG10 duo in the maintenance of GA biogenesis following excitotoxic insult. Although the GA underwent fragmentation in response to NMDA treatment, we observed a substantial delay in GA disintegration in neurons lacking either JNK1 or SCG10.

Lugares e objetos de memória no batuque gaúcho

Resumo O artigo aborda a mediação de objetos e lugares para o aprendizado da hierarquia religiosa e como fonte de registro de memória na tradição oral do batuque gaúcho. Apresento relato etnográfico sobre os antepassados na Nação Oyó, demonstrando como a geografia porto-alegrense faz memorá-los e saudá-los em seu sentido mais genérico, como orixás e escravos da África. Em sentido específico, são os objetos, sagrados ou não, que remetem aos parentes de santo mais “antigos”, vivos ou mortos. Os ensinamentos transmitidos por pais de santo a seus filhos são mediados por passeios em pontos específicos da cidade e pela utilização desses objetos, fazendo com que a memória conecte corpo e mente e também objetos e lugares.

Vammaiset lapset keskiajalla

Kirjallisuusarvostelu

Spectroscopic Studies of III-V Semiconductor Materials for Improved Devices

Defects in semiconductor crystals and at their interfaces usually impair the properties and the performance of devices. These defects include, for example, vacancies (i.e., missing crystal atoms), interstitials (i.e., extra atoms between the host crystal sites), and impurities such as oxygen atoms. The defects can decrease (i) the rate of the radiative electron transition from the conduction band to the valence band, (ii) the amount of charge carriers, and (iii) the mobility of the electrons in the conduction band. It is a common situation that the presence of crystal defects can be readily concluded as a decrease in the luminescence intensity or in the current flow for example. However, the identification of the harmful defects is not straightforward at all because it is challenging to characterize local defects with atomic resolution and identification. Such atomic-scale knowledge is however essential to find methods for reducing the amount of defects in energy-efficient semiconductor devices. The defects formed in thin interface layers of semiconductors are particularly difficult to characterize due to their buried and amorphous structures. Characterization methods which are sensitive to defects often require well-defined samples with long range order. Photoelectron spectroscopy (PES) combined with photoluminescence (PL) or electrical measurements is a potential approach to elucidate the structure and defects of the interface. It is essential to combine the PES with complementary measurements of similar samples to relate the PES changes to changes in the interface defect density. Understanding of the nature of defects related to III-V materials is relevant to developing for example field-effect transistors which include a III-V channel, but research is still far from complete. In this thesis, PES measurements are utilized in studies of various III-V compound semiconductor materials. PES is combined with photoluminescence measurements to study the SiO2/GaAs, SiNx/GaAs and BaO/GaAs interfaces. Also the formation of novel materials InN and photoluminescent GaAs nanoparticles are studied. Finally, the formation of Ga interstitial defects in GaAsN is elucidated by combining calculational results with PES measurements.