The effect of temperature and strain rate on the deformation behaviour, structure development and properties of biaxially stretched PET-clay nanocomposites.

The inclusion of a synthetic fluoromica clay in PET affects its processability via biaxial stretching and stretching temperature (95 °C and 102 °C) and strain rate (1 s-1 and 2 s-1) influence the structuring and properties of the stretched material. The inclusion of clay has little effect on the temperature operating window for the PET–clay but it has a major effect on deformation behaviour which will necessitate the use of much higher forming forces during processing. The strain hardening behaviour of both the filled and unfilled materials is well correlated with tensile strength and tensile modulus. Increasing the stretching temperature to reduce stretching forces has a detrimental effect on clay exfoliation, mechanical and O2 barrier properties. Increasing strain rate has a lesser effect on the strain hardening behaviour of the PET–clay compared with the pure PET and this is attributed to possible adiabatic heating in the PET–clay sample at the higher strain rate. The Halpin–Tsai model is shown to accurately predict the modulus enhancement of the PET–clay materials when a modified particle modulus rather than nominal clay modulus is used.

Nonacid reflux episodes reaching the pharynx are important factors associated with cough.

Gastroesophageal reflux is implicated in the pathogenesis of asthma and chronic cough. To date most studies have focused on acid reflux measured by pH below the upper esophageal sphincter (UES). The aim of this study was to assess the relationship between cough and reflux through the UES into the pharynx. Methods: Thirty-seven patients with asthma (19) and chronic cough (18) were recruited from the respiratory clinic. Reflux was monitored using a combined multichannel intraluminal impedance and pH probe by detecting (1) bolus reflux episodes within the esophagus and in the pharynx and (2) acidic reflux episodes within the esophagus and in the pharynx. All acid suppressive therapy was stopped for at least 7 days before the study. Demonstration of cough being linked to reflux was achieved using the symptom association probability (SAP). This was calculated using a 2-minute association window between symptoms and bolus entry into the esophagus. SAP was considered positive if >95%. Results: A positive SAP for cough was noted in 7/26 patients reporting symptoms on the day of monitoring. Compared with SAP-negative patients, SAP-positive patients had both a greater number [median (interquartile range), 5(2 to 8) vs. 2(0 to 4), P

Evaluation of Random Delay Insertion against DPA on FPGAs

Side-channel attacks (SCA) threaten electronic cryptographic devices and can be carried out by monitoring the physical characteristics of security circuits. Differential Power Analysis (DPA) is one the most widely studied side-channel attacks. Numerous countermeasure techniques, such as Random Delay Insertion (RDI), have been proposed to reduce the risk of DPA attacks against cryptographic devices. The RDI technique was first proposed for microprocessors but it was shown to be unsuccessful when implemented on smartcards as it was vulnerable to a variant of the DPA attack known as the Sliding-Window DPA attack.Previous research by the authors investigated the use of the RDI countermeasure for Field Programmable Gate Array (FPGA) based cryptographic devices. A split-RDI technique wasproposed to improve the security of the RDI countermeasure. A set of critical parameters wasalso proposed that could be utilized in the design stage to optimize a security algorithm designwith RDI in terms of area, speed and power. The authors also showed that RDI is an efficientcountermeasure technique on FPGA in comparison to other countermeasures.In this article, a new RDI logic design is proposed that can be used to cost-efficiently implementRDI on FPGA devices. Sliding-Window DPA and realignment attacks, which were shown to beeffective against RDI implemented on smartcard devices, are performed on the improved RDIFPGA implementation. We demonstrate that these attacks are unsuccessful and we also proposea realignment technique that can be used to demonstrate the weakness of RDI implementations.

Physicochemical Characterization of Morpholinium Cation Based Protic Ionic Liquids Used As Electrolytes

New protic ionic liquids (PILs) based on the morpholinium, N-methylmorpholinium, and N-ethyl morpholinium cations have been synthesized through a simple and atom-economic neutralization reaction between N-alkyl morpholine and formic acid. Their densities, refractive indices, thermal properties, and electrochemical windows have been measured. The temperature dependence of their dynamic viscosity and ionic conductivity have also been determined. The results allow us to classify them according to a classical Walden diagram and to evaluate their “fragility”. In addition, morpholinium based PILs exhibit a large electrochemical window as compared to other protic ionic liquids (up 2.91 V) and possess relatively high ionic conductivities of 10-16.8 mS·cm-1 at 25 °C and 21-29 mS·cm-1 at 100 °C, and a residual conductivity close to 1.0 mS·cm-1 at -15 °C. PIL-water mixtures exhibit high ionic conductivities up to 65 mS·cm-1 at 25 °C and 120 mS·cm-1 at 100 °C for morpholinium formate with water weight fraction ww = 0.6. Morpholinium based PILs studied in this work have a low cost and low toxicity, are good ionic liquids, and prove extremely fragile. They have wide applicable perspectives as electrolytes for fuel cell devices, thermal transfer fluids, and acid-catalyzed reaction media as replacements of conventional solvents.

Thermoforming carbon fibre-reinforced thermoplastic composites

The use of carbon fibre composites is growing in many sectors but their use remains stronger in very high value industries such as aerospace where the demands of the application more easily justify the high energy input needed and the corresponding costs incurred. This energy and cost input is returned through gains over the whole life of the product, with for example, longer maintenance intervals for an aircraft and lower fuel burn. Thermoplastic composites however have a different energy and cost profile compared to traditional thermosets with notable differences in recyclability, but this profile is not well quantified or documented. This study considers the key process control parameters and identifies an optimal window for processing, along with the effect this has on the final characteristics of the manufactured parts. Interactions between parameters and corresponding sensitivities are extracted from the results.

Image processing chip for small object detection

A new, front-end image processing chip is presented for real-time small object detection. It has been implemented using a 0.6 µ, 3.3 V CMOS technology and operates on 10-bit input data at 54 megasamples per second. It occupies an area of 12.9 mm×13.6 mm (including pads), dissipates 1.5 W, has 92 I/O pins and is to be housed in a 160-pin ceramic quarter flat-pack. It performs both one- and two-dimensional FIR filtering and a multilayer perceptron (MLP) neural network function using a reconfigurable array of 21 multiplication-accumulation cells which corresponds to a window size of 7×3. The chip can cope with images of 2047 pixels per line and can be cascaded to cope with larger window sizes. The chip performs two billion fixed point multiplications and additions per second.

Fluidised bed characterisation using Raman spectroscopy: Applications to pharmaceutical processing

This study investigates a model system for potential pharmaceutical materials in fluidised bed processes. In particular, this study proposes a novel use of Raman spectroscopy, which allows in situ measurement of the composition of the material within the fluidised bed in three spatial dimensions and as a function of time. This is achieved by recording Raman spectra from specific volumes of space. The work shows that Raman spectroscopy can be used to provide 3D maps of the concentration and chemical structure of the particles in a fluidised bed within a relatively short (120 s) time window. At the most basic level the technique measures particle density via the intensity of the Raman spectra, however this could be used. More importantly the data are also rich in spectroscopic information on the chemical structure of the fluidised particles which is useful either for monitoring a given granulation process or more generally for the analysis of the dynamics of the airflow if the data were incorporated into an appropriate model. The technique has the potential to give detailed in situ information on how the structure and composition of the granules/powders within the fluidised bed (dryer or granulator) vary with the position and evolve with time. (c) 2007 Elsevier Ltd. All rights reserved.

Bright quasi-phase-matched soft-x-ray harmonic radiation from argon ions

Selective enhancement (> 10(3)) of harmonics extending to the water window (similar to 4 nm) generated in an argon gas filled straight bore capillary waveguide is demonstrated. This enhancement is in good agreement with modeling which indicates that multimode quasi-phase-matching is achieved by rapid axial intensity modulations caused by beating between the fundamental and higher-order capillary modes. Substantial pulse energies (> 10 nJ per pulse per harmonic order) at wavelengths beyond the carbon K edge (similar to 4.37 nm, similar to 284 eV) up to similar to 360 eV are observed from argon ions for the first time.

Soft X-ray harmonic comb from relativistic electron spikes

We demonstrate a new high-order harmonic generation mechanism reaching the "water window" spectral region in experiments with multiterawatt femtosecond lasers irradiating gas jets. A few hundred harmonic orders are resolved, giving mu J/sr pulses. Harmonics are collectively emitted by an oscillating electron spike formed at the joint of the boundaries of a cavity and bow wave created by a relativistically self-focusing laser in underdense plasma. The spike sharpness and stability are explained by catastrophe theory. The mechanism is corroborated by particle-in-cell simulations.

Study of reliability of fibre Bragg grating fibre optic strain sensors for field-test applications

In this paper, the reliability and thus the suitability of optical fibre strain sensors for surface strain measurement in concrete structures was investigated. Two different configurations of optical strain sensors were used each having different mountings making them suitable for different uses in various structures. Due to the very limited time available to install the sensors and take result, commercially packaged sensors were used. In the tests carried out each sensor was mounted onto a concrete beam which was then subjected to a range of known and calibrated loadings. The performance of the optical strain sensors thus evaluated was compared with the results of conventional techniques. This comparison allows for selecting the best performing combination of sensor/mounting, i.e. long-gauge sensor with mounts bolted to threaded rods glued into the concrete for use in future work in a field test where a limited time window was available for installation, testing and post-test demounting. © 2012 Elsevier B.V.

Relativistic High Harmonic Generation In Gas Jet Targets

We experimentally demonstrate a new regime of high-order harmonic generation by relativistic-irradiance lasers in gas jet targets. Bright harmonics with both odd and even orders, generated by linearly as well as circularly polarized pulses, are emitted in the forward direction, while the base harmonic frequency is downshifted. A 9 TW laser generates harmonics up to 360 eV, within the 'water window' spectral region. With a 120 TW laser producing 40 uJ/sr per harmonic at 120 eV, we demonstrate the photon number scalability. The observed harmonics cannot be explained by previously suggested scenarios. A novel high-order harmonics generation mechanism [T. Zh. Esirkepov et al., AIP Proceedings, this volume], which explains our experimental findings, is based on the phenomena inherent in the relativistic laser - underdense plasma interactions (self-focusing, cavity evacuation, and bow wave generation), mathematical catastrophe theory which explains formation of electron density singularities (cusps), and collective radiation due to nonlinear oscillations of a compact charge.

Palaeoenvironmental changes since the Last Glacial Maximum: Patterns, timing and dynamics throughout South America

The vast diversity of present vegetation and environments that occur throughout South America (12°N to 56°S) is the result of diverse processes that have been operating and interacting at different spatial and temporal scales. Global factors, such as the concentration of CO2 in the atmosphere, may have been significant for high altitude vegetation during times of lower abundance, while lower sea levels of glacial stages potentially opened areas of continental shelf for colonisation during a substantial portion of the Quaternary. Latitudinal variation in orbital forcing has operated on a regional scale. The pace of climate change in the tropics is dominated by precessional oscillations of c. 20 kyr, while the high latitudes of the south are dominated by obliquity oscillations of c. 40 kyr. In particular, seasonal insolation changes forced by precessional oscillations must have had important consequences for the distribution limits of species, with potentially different effects depending on the latitude. The availability of taxa, altitude and human impact, among other events, have locally influenced the environments. Disentangling the different forcing factors of environmental change that operate on different timescales, and understanding the underlying mechanisms leads to considerable challenges for palaeoecologists. The papers in this Special Issue present a selection of palaeoecological studies throughout South America on vegetation changes and other aspects of the environment, providing a window on the possible complexity of the nature of transitions and timings that are potentially available.

Public health interventions in midwifery: a systematic review of systematic reviews

Background: Maternity care providers, particularly midwives, have a window of opportunity to influence pregnant women about positive health choices. This aim of this paper is to identify evidence of effective public health interventions from good quality systematic reviews that could be conducted by midwives.

Methods: Relevant databases including MEDLINE, Pubmed, EBSCO, CRD, MIDIRS, Web of Science, The Cochrane Library and Econlit were searched to identify systematic reviews in October 2010. Quality assessment of all reviews was conducted.

Results: Thirty-six good quality systematic reviews were identified which reported on effective interventions. The reviews were conducted on a diverse range of interventions across the reproductive continuum and were categorised under: screening; supplementation; support; education; mental health; birthing environment; clinical care in labour and breast feeding. The scope and strength of the review findings are discussed in relation to current practice. A logic model was developed to provide an overarching framework of midwifery public health roles to inform research policy and practice.

Conclusions: This review provides a broad scope of high quality systematic review evidence and definitively highlights the challenge of knowledge transfer from research into practice. The review also identified gaps in knowledge around the impact of core midwifery practice on public health outcomes and the value of this contribution. This review provides evidence for researchers and funders as to the gaps in current knowledge and should be used to inform the strategic direction of the role of midwifery in public health in policy and practice.

Censoring the 1970s: The BBFC and the Decade that Taste Forgot

This book is a study of the British Board of Film Censors in the 1970s. In permitting and refusing specific material to be shown on cinema screens the BBFC were dictating patterns of taste and helping shape and determine notions of acceptability. Contentious and controversial texts like A Clockwork Orange (1971), Straw Dogs (1971) The Devils (1971) and Life of Brian (1979) have been used to draw attention to the way in which the BBFC operated in the 1970s. While it is true to say that these films encountered major censorship problems, what of the hundreds of other films which were being classified at the same time? Did all films struggle with the British censors in this period, and can these famous examples be fitted into broader patterns of censorship policy and practice?

In studying over 250 film files from the BBFC archive, this work reveals how 1970s films such as Vampire Circus (1971), Confessions of a Window Cleaner (1974) and Carry on Emmannuelle (1978) also ran in to trouble with the film censor. This work explores the complex process of negotiation and compromise which affected all film submissions in the 1970s and the way in which the BBFC actively, and often sympathetically, negotiated with film directors, producers and distributors to assign the correct category to each film. The lack of any defined formal censorship policy in this period allowed the BBFC to work alongside the film industry and push cultural, social and artistic boundaries; however it also left the Board open to accusations of favouritism, subjectivity and personal bias.

This work is not simply a study of controversial films and contentious issues, but rather engages with wider issues of changing permission, legal struggles, the influence of the media and the legislative and governmental controls which both helped and hindered the BBFC in this important post-war decade. The approach used within this work focuses on historical and archival research, making it importantly inter-textual and offering a great deal to scholars from a number of associated disciplines, including history, social policy, media and communications and politics.

The institutionalisation of the European Internal Cross-Border Co-operation Policy: A first appraisal

In the space of just 20 years, internal cross-border co-operation (CBC) has transformed from a marginal issue for European integration into an important strand of the third objective of European Union's (EU's) regional policy. How might this process of transformation be explained? This study intends to reconstruct the chronology of its development through interviews and use of archival material. The emergence of the current CBC policy was not, we argue, an inevitable solution to the problem of border management but, rather, the result of a struggle between the actors of that policy sub-system. The dramatic rise of CBC is the result of a series of factors that originated with the signing of the Single European Act in 1986. The construction of CBC as a set of problems and solutions by a network of policy actors at the margins of the EU through a series of technical reports, together with the policy window opened by the appointment of the Delors Commission, allowed the launching of an innovative CBC policy which has consolidated over time.