989 resultados para Variaci?n (Ling??stica)
Resumo:
The discrete vortex method is not capable of precisely predicting the bluff body flow separation and the fine structure of flow field in the vicinity of the body surface. In order to make a theoretical improvement over the method and to reduce the difficulty in finite-difference solution of N-S equations at high Reynolds number, in the present paper, we suggest a new numerical simulation model and a theoretical method for domain decomposition hybrid combination of finite-difference method and vortex method. Specifically, the full flow. field is decomposed into two domains. In the region of O(R) near the body surface (R is the characteristic dimension of body), we use the finite-difference method to solve the N-S equations and in the exterior domain, we take the Lagrange-Euler vortex method. The connection and coupling conditions for flow in the two domains are established. The specific numerical scheme of this theoretical model is given. As a preliminary application, some numerical simulations for flows at Re=100 and Re-1000 about a circular cylinder are made, and compared with the finite-difference solution of N-S equations for full flow field and experimental results, and the stability of the solution against the change of the interface between the two domains is examined. The results show that the method of the present paper has the advantage of finite-difference solution for N-S equations in precisely predicting the fine structure of flow field, as well as the advantage of vortex method in efficiently computing the global characteristics of the separated flow. It saves computer time and reduces the amount of computation, as compared with pure N-S equation solution. The present method can be used for numerical simulation of bluff body flow at high Reynolds number and would exhibit even greater merit in that case.
Resumo:
Numerous microcracks propagation in one metal matrix composite, Al/SiCp under impact loading was investigated. The test data was got with a specially designed impact experimental approach. The analysis to the density, nucleating locations and distributions of the microcracks as well as microstructure effects of the original composite was received particular emphasis. The types of microcracks or debonding nucleated in the tested composite were dependent on the stress level and its duration. Distributions of the microcracks were depended on that of microstructures of the tested composite while total number of microcracks in unit area and unit duration, was controlled by the stress levels. Also, why the velocity was much lower than theoretical estimations for elastic solids and why the microcracks propagating velocities increased with the stress levels' increasing in current experiments were analysed and explained.
Resumo:
Contact pressure of porous Al2O3 probed by nanoindentation was investigated by dimensional analysis with special attention paid to scaling effects in the mechanical behavior. It was found that, for sample containing small grains and interconnected pores, the contact pressure is manifest dominated by bonding strength of the porous alumina. Whereas the samples with coarse grain and various porous structures exhibit higher contact pressures and smaller residual deformations, which can be attributed to the mechanical response of the solid-phase under current limited peak loads.
Resumo:
A Nonlinear Fluid Damping (NFD) in the form of the square-velocity is applied in the response analysis of Vortex-induced Vibrations (VIV). Its nonlinear hydrodynamic effects oil the coupled wake and structure oscillators are investigated. A comparison between the coupled systems with the linear and nonlinear fluid dampings and experiments shows that the NFD model can well describe response characteristics, such as the amplification of body displacement at lock-in and frequency lock-ill, both at high and low mass ratios. Particularly, the predicted peak amplitude of the body in the Griffin plot is ill good agreement with experimental data and empirical equation, indicating the significant effect of the NFD on the structure motion.
Resumo:
We report an intriguing observation that the interaction of brittle nanoscale periodic corrugations (NPCs) can lead to the formation of ductile dimples on the dynamic fracture surface of a tough Vit 1 bulk metallic glass (BMG) under high-velocity plate impact. A “beat” phenomenon due to superposition of simple harmonic vibrations, approximately characterizing NPCs, is proposed to explain this unusual brittle-to-ductile transition. The present results agree well with our previously revealed energy dissipation mechanism in the fracture of BMGs.
Resumo:
Firstly, the main factors are obtained by use of dimensionless analysis. Secondly, the time scaling factors in centrifuge modeling of bucket foundations under dynamic load are analyzed based on dimensionless analysis and control- ling equation. A simplified method for dealing with the conflict of scaling factors of the inertial and the percolation in sand foundation is presented. The presented method is that the material for experiments is not changed while the effects are modified by perturbation method. Thirdly, the characteristic time of liquefaction state and the characteristic scale of affected zone are analyzed.
Resumo:
The Daya Bay Reactor Antineutrino Experiment observed the disappearance of reactor $\bar{\nu}_e$ from six $2.9~GW_{th}$ reactor cores in Daya Bay, China. The Experiment consists of six functionally identical $\bar{\nu}_e$ detectors, which detect $\bar{\nu}_e$ by inverse beta decay using a total of about 120 metric tons of Gd-loaded liquid scintillator as the target volume. These $\bar{\nu}_e$ detectors were installed in three underground experimental halls, two near halls and one far hall, under the mountains near Daya Bay, with overburdens of 250 m.w.e, 265 m.w.e and 860 m.w.e. and flux-weighted baselines of 470 m, 576 m and 1648 m. A total of 90179 $\bar{\nu}_e$ candidates were observed in the six detectors over a period of 55 days, 57549 at the Daya Bay near site, 22169 at the Ling Ao near site and 10461 at the far site. By performing a rate-only analysis, the value of $sin^2 2\theta_{13}$ was determined to be $0.092 \pm 0.017$.
Resumo:
The nonlinear spectroscopy of cold atoms in the diffuse laser cooling system is studied in this paper. We present the theoretical models of the recoil-induced resonances (RIR) and the electromagnetically-induced absorption (EIA) of cold atoms in diffuse laser light, and show their signals in an experiment of cooling Rb-87 atomic vapor in an integrating sphere. The theoretical results are in good agreement with the experimental ones when the light intensity distribution in the integrating sphere is considered. The differences between nonlinear spectra of cold atoms in the diffuse laser light and in the optical molasses are also discussed. (c) 2009 Optical Society of America
Resumo:
Los mecanismos epigenéticos, entre los que está implicada la modificación covalente de histonas, son esenciales para el mantenimiento estable de la actividad génica en las células. Estos mecanismos también están implicados en la aparición de enfermedades como el cáncer colorrectal (CCR), siendo la metástasis hepática una de las formas más agresivas de la misma al producir una drástica disminución de la esperanza de vida del enfermo. Las modificaciones en las histonas, conocidas recientemente como código histónico, afectan a la estructura de la cromatina y juegan un papel importante en el desarrollo de la tumorogénesis. Sin embargo, se sabe poco acerca de aquellas células que adquieren la capacidad de metastatizar, y es por ello que en el presente trabajo se estudian las diferencias epigenéticas entre células tumorales primarias y células tumorales metastásicas para el patrón de trimetilación de la histona H3 en tres residuos diferentes del aminoácido lisina: lisina 4 (H3K4me3), lisina 9 (H3K9me3) y lisina 27 (H3K27me3).
Resumo:
Esta Tesis Doctoral presenta un metamodelo para la estimaci�n del fen�meno de interacci�n el�stica en las uniones atornilladas de torres de aerogenerador, cuya principal particularidad geom�trica es la existencia de un hueco entre bridas. El metamodelo permite conocer la p�rdida de carga que cada tornillo de la uni�n experimenta durante la secuencia de atornillado a consecuencia de la interacci�n el�stica ocurrida. El metamodelo consta de cuatro par�metros (resortes lineales) que simulan la respuesta de la uni�n durante la secuencia, y cuyos valores se obtienen a partir de dos an�lisis est�tico-lineales. Se ha creado un algoritmo que, a trav�s del metamodelo, permite llevar a cabo la simulaci�n de secuencias de atornillado; dicho proceso consiste en reproducir una determinada secuencia de atornillado a partir de las cargas introducidas en los tornillos, de forma que, a trav�s de la estimaci�n de las interacciones el�sticas ocurridas durante la secuencia, proporciona como resultado las cargas finales en los tornillos. Tambi�n se ha desarrollado una metodolog�a que, mediante su correspondiente algoritmo, permite optimizar secuencias de atornillado. El proceso de optimizaci�n consiste en calcular las cargas a aplicar a los tornillos a lo largo de una determinada secuencia a fin de obtener en ellos una determinada distribuci�n final de cargas, que generalmente se desea uniforme y se denomina precarga. Combinando los procesos de simulaci�n y optimizaci�n, el metamodelo permite definir la secuencia �ptima para una determinada uni�n. Los resultados obtenidos han sido validados mediante modelos param�tricos de elementos finitos. Por �ltimo, debe remarcarse que, adem�s de proporcionar buenos resultados, tanto el proceso de simulaci�n como el de optimizaci�n se llevan a cabo con un coste computacional muy bajo gracias a la simplicidad del metamodelo.
Resumo:
La aplicaci�n de campos geomagn�ticos con la polaridad cambiante promueve la plasticidad de la corteza visual de animales privados visualmente mediante la cr�a en oscuridad, o bien a trav�s de la sutura palpebral de un ojo.Esto es debido a que la estimulaci�n magn�tica produce la down-regulaci�n de la expresi�n de los microRNAs let-7b*, miR-330, miR-338* y miR-376c en la corteza visual de animales sometidos a la cr�a en oscuridad, as� como de animales sujetos a sutura palpebral de un ojo. Como consecuencia de la down-regulaci�n de la expresi�n de los microRNAs citados anteriormente, se ven incrementados los niveles de expresi�n de sus correspondientes mol�culas diana, Conexina 26 para el caso de let-7b*, Tenascina R en el caso de miR-330, Contactina 4 para el caso de miR-338* y Matriz metalopeptidasa 9 y �-sinucle�na, ambas mol�culas diana de miR-376c. El aumento de expresi�n de estas mol�culas diana a nivel de RNA mensajero, as� como a nivel de prote�na en la corteza visual promueve la capacidad pl�stica de la corteza visual, ya que estas mol�culas diana se encuentran implicadas en procesos de crecimiento/elongaci�n de las neuritas y en la regulaci�n de la morfolog�a de las espinas dendr�ticas.
Resumo:
Based on the Fresnel-Kirchkoff diffraction theory, we build up a Gaussian diffraction model of metal-oxide-type super-resolution near field structure (super-RENS), which can describe far field optical properties. The spectral contrast induced by refractive index and the structural changes in AgOx, PtOx and PdOx thin films, which are the key functional layers in super-RENS, are studied by using this model. Comparison results indicate that the spectral contrast intensively on laser-induced distribution and change of the refractive index in the metal-oxide films. The readout mechanism of the metal-oxide-type super-RENS optical disc is further clarified. This Gaussian diffraction model can be used as a simple and effective method for choosing proper active materials in super-RENS.
Resumo:
Thermal effects in Nd:YAG planar waveguide lasers with non-symmetrical claddings are discussed. The heat generated in the active core can be removed more efficiently by directly contacting the active core to the heat sink. Several cladding materials are compared to optimize the heat removal. Furthermore, uniform pumping is achieved with oblique edge-pumping technique. Using quasi-CW pumping at 1 KHz repetition rate, an average output power of 280 W with a slope efficiency of 38% is obtained with a positive unstable resonator. (C) 2008 Elsevier B.V. All rights reserved.