Hearings before the Committee on Finance, United States Senate, Sixty-seventh Congress, first session, on the proposed Tariff act of 1921 (H. R. 7456) ... 1922.

Hearings held: July 25-Aug. 10, 1921. (Pt.1)

Gelatinisation of starch in mixtures of sugars. II. Application of differential scanning calorimetry

Differential scanning calorimetry was used to investigate the effect of mixtures of glucose and fructose, and five types of honeys on starch gelatinisation. At a 1:1 starch:water ratio, glucose generally increased the enthalpy (DeltaH(gel)) and temperatures (T-onset, T-peak and T-end) of gelatinisation more than fructose. Upon mixing, DeltaH(gel) of the low-temperature endotherm decreased in comparison to the sole sugars, but was fairly constant (7.7 +/- 0.33 J/g dry starch). DeltaH(gel) of the high-temperature endotherm increased with the fructose content. For both endotherms, the gelatinisation temperatures were unchanged (CV less than or equal to 3%) for the mixtures. With the honeys (moisture, 14.9-18.0%; fructose, 37.2-44.0%; glucose, 28.3-31.9%) added at 1.1-4.4 g per g dry starch, the enthalpy and temperatures of gelatinisation did not vary significantly (CV less than or equal to 6%). Typical thermograms are presented, and the results are interpreted in the light of the various proposed mechanisms for starch gelatinisation in sugar-water systems, total sugar content and possible sugar-sugar interactions. The thermograms were broader in the presence of the sugars and honeys, and a biphasic character was consistently exhibited. The application of an exponential equation to the gelatinisation temperatures of the starch-honey mixtures revealed an opposing influence of fructose and glucose during gelatinisation. The mechanism of starch gelatinisation may be better understood if techniques could be perfected to quantify breakage and formation of hydrogen bonds in the starch granules, and suggested techniques are discussed. (C) 2004 Elsevier Ltd. All rights reserved.

International Union of Pharmacology. LXVI. Orphan nuclear receptors

Half of the members of the nuclear receptors superfamily are so-called orphan receptors because the identity of their ligand, if any, is unknown. Because of their important biological roles, the study of orphan receptors has attracted much attention recently and has resulted in rapid advances that have helped in the discovery of novel signaling pathways. In this review we present the main features of orphan receptors, discuss the structure of their ligand-binding domains and their biological functions. The paradoxical existence of a pharmacology of orphan receptors, a rapidly growing and innovative field, is highlighted.

Sustainable design practitioners: Why they must be at the centre of discussions on sustainable design education

Sustainable design education is vital for engineering students. This is to allow them to meet the challenges both engineering and the wider community will face in the future. This need has not only been mandated by Engineers Australia’s graduate attributes from an Australian perspective, but more widely the issue of sustainability is one of the greatest challenges humanity has ever faced. Engineers need to be at the forefront of this challenge, because we can not only do the greatest good, but have the potential to cause the greatest harm. The biggest question with respect to the education of engineers about sustainable design is what do engineers need to know, and how best to enable this learning. This paper argues that since the entire phenomenon of sustainable design is constantly growing and changing, it is only by looking at practitioners currently trying design sustainably, and their ways of experiencing sustainable design, can we hope to articulate what it is, and therefore what and how we need to teach engineering students. It also argues that to accommodate sustainable design within engineering, we need to go further and transform the engineering profession to enable it to meet the challenges that sustainability presents. © 2005, Australasian Association for Engineering Education

A SOTERIOLOGIA SOCIAL DE JOHN WESLEY com consideração especial de seus aspectos comunitários, sinergéticos e públicos

Este estudo investiga os elementos da soteriologia de John Wesley e seus aspectos dinamizantes. Em vez de favorecer um determinado período da vida de Jonh Wesley, a biografia teológica de John Wesley é desenvolvida a partir do conceito da sedimentação de experiência. Dessa forma, a theologia viatorum de John Wesley é desenvolvida com foco nos seus elementos transversais e os crescentes desdobramentos dos mesmos segundo os seus aspectos comunitários, sinergéticos e públicos. Segundo esta tese, a theologia viatorum de John Wesley ganha em profundidade e vitalidade com a sua crescente e consciente aprendizagem e compromisso com o povo inglês e, em especial, com os pobres da Inglaterra. Acompanhado por uma cuidadosa auto-análise, Wesley parte para a análise do efeito de diversas soteriologias dos seus dias no cotidiano, as quais são marcadas pela demorada transição entre a época medieval e a modernidade. Surge uma re-construção característica da soteriologia, designado por nós como soteriologia social. Entendemos esta soteriologia social como o eixo principal da teologia de John Wesley que se manifesta numa típica antropologia, cristologia, pneumatologia, escatologia e eclesiologia soteriológica. Os aspectos comunitários, sinergéticos e públicos desta soteriologia social são vistos e desenvolvidos por Wesley a partir da auto-experiência e da convivência com o povo, suas dinâmicas, sua cultura, suas necessidades e suas competências. Tais aspectos levam, passo a passo, a uma práxis que começa a contemplar o entrelaçamento entre a reforma da igreja, da nação e a transformação de pessoas. Este movimento é comotivado por um horizonte soterioló gico utópico que prevê a continuação da theologia viatorum até na transformação do cosmo inteiro. A soteriologia social é parecida com a um tecido que acompanha a topografia socio-econômica e religiosa da época, procurando caminhos para a superação dos seus impasses, da sua desesperança e irresponsabilidade em relação aos pobres.(AU)

Por uma sociologia da produção e reprodução musical do presbiterianismo brasileiro: a tendência gospel e sua influência no culto

O culto presbiteriano brasileiro se cristalizou de forma peculiar em relação ao seu estilo litúrgico. A exclusão de elementos mais ritualísticos somados ás condições de inserção deram um contorno bem específico a esse culto no Brasil. A sua forma pode ser reduzida a dois pilares de sustentação: a prédica e a música. A música também se desenvolveu de um modo peculiar dentro da denominação. Porém, desde início dos anos 90 essa musica tradicional tem sido abalada com a consolidação do mercado de música gospel. Surgiu então no Brasil um novo tipo de produção musical, relacionada com o louvor congregacional, que pelo aspecto emocional e performático, contraria a produção tradicional. Esse novo modelo de louvor, fomentado pela mídia especializada, pelo mercado gospel e em acordo com as tendências culturais atuais, tem plena aceitação do público jovem e dos novos conversos, dificultando a manutenção da tradição. Muitos são os motivos para tal fato, entre eles a atração que o mercado exerce sobre o jovem presbiteriano e o papel litúrgico da música nesse culto, que sempre gerou um grande clima de insatisfação religiosa de alguns sub grupos do laicato. Assim, a produção e reprodução musical do culto presbiteriano têm sofrido modificações que podem contribuir diretamente para uma das maiores mutações cúlticas que o presbiterianismo já sofreu desde a sua inserção entre nós. Esse novo modelo de louvor propiciou uma ruptura com a hinódia tradicional, que há muito já estava se enfraquecendo. Esta tese discute as mudanças ocorridas na produção e reprodução da música litúrgica do presbiterianismo e a sua conseqüência direta no perfil desse culto, bem como os motivos que sustentam tais mudanças, tanto em uma perspectiva micro como macro social.(AU)

Ranking ontologies with AKTiveRank

Ontology search and reuse is becoming increasingly important as the quest for methods to reduce the cost of constructing such knowledge structures continues. A number of ontology libraries and search engines are coming to existence to facilitate locating and retrieving potentially relevant ontologies. The number of ontologies available for reuse is steadily growing, and so is the need for methods to evaluate and rank existing ontologies in terms of their relevance to the needs of the knowledge engineer. This paper presents AKTiveRank, a prototype system for ranking ontologies based on a number of structural metrics.

Business process orientated holonic (PrOH) modeling

Purpose: The purpose of this paper is to describe how the application of systems thinking to designing, managing and improving business processes has resulted in a new and unique holonic-based process modeling methodology know as process orientated holonic modeling. Design/methodology/approach: The paper describes key systems thinking axioms that are built upon in an overview of the methodology; the techniques are described using an example taken from a large organization designing and manufacturing capital goods equipment operating within a complex and dynamic environment. These were produced in an 18 month project, using an action research approach, to improve quality and process efficiency. Findings: The findings of this research show that this new methodology can support process depiction and improvement in industrial sectors which are characterized by environments of high variety and low volume (e.g. projects; such as the design and manufacture of a radar system or a hybrid production process) which do not provide repetitive learning opportunities. In such circumstances, the methodology has not only been able to deliver holonic-based process diagrams but also been able to transfer strategic vision from top management to middle and operational levels without being reductionistic. Originality/value: This paper will be of interest to organizational analysts looking at large complex projects whom require a methodology that does not confine them to thinking reductionistically in "task-breakdown" based approaches. The novel ideas in this paper have great impact on the way analysts should perceive organizational processes. Future research is applying the methodology in similar environments in other industries. © Emerald Group Publishing Limited.

Exploring value through integrated service solutions:the case of e-grocery shopping

Purpose – The purpose of this paper is to demonstrate the need for an improved understanding of consumer value for online grocery purchases and to propose the notion of “integrated service solution” packages as a strategy for growing and successfully sustaining the channel to guide both marketing strategy and policy. Design/methodology/approach – This paper integrates and synthesises research from retailing, consumer behaviour and service quality literatures in order to develop a conceptual framework for understanding the value of e-grocery shopping to aid practitioners to address the critical needs, expectations and concerns of consumers for the development of grocery shopping within the online environment. Findings – This paper offers an alternative approach to allow e-grocery to become a mainstream retail channel in its own right and not to compete with the in-store offerings. The research demonstrates the need for a progressive approach that follows contemporary consumer needs and habits at the household level. The conjecture is that shopping for fast-moving consumer goods follows a learning path that needs to be replicated in the online context. Moreover, it is suggested that consumer resistance to the adoption of the new channel should be addressed not only from a technological perspective but also from the social aspects of online shopping. Originality/value – The research provides a practical framework for both retailers and policy makers on how the “next generation” of online services can be developed using a “bottom up” consumer perspective. This paper also advocates a non-technological bias to e-grocery retailing strategy.

Computer aided form roll design

Cold roll forming is an extremely important but little studied sheet metal forming process. In this thesis, the process of cold roll forming is introduced and it is seen that form roll design is central to the cold roll forming process. The conventional design and manufacture of form rolls is discussed and it is observed that surrounding the design process are a number of activities which although peripheral are time consuming and a possible source of error. A CAD/CAM system is described which alleviates many of the problems traditional to form roll design. New techniques for the calculation of strip length and controlling the means of forming bends are detailed. The CAD/CAM system's advantages and limitations are discussed and, whilst the system has numerous significant advantages, its principal limitation can be said to be the need to manufacture form rolls and test them on a mill before a design can be stated satisfactory. A survey of the previous theoretical and experimental analysis of cold roll forming is presented and is found to be limited. By considering the previous work, a method of numerical analysis of the cold roll forming process is proposed based on a minimum energy approach. Parallel to the numerical analysis, a comprehensive range of software has been developed to enhance the designer's visualisation of the effects of his form roll design. A complementary approach to the analysis of form roll design is the generation of form roll design, a method for the partial generation of designs is described. It is suggested that the two approaches should continue in parallel and that the limitation of each approach is knowledge of the cold roll forming process. Hence, an initial experimental investigation of the rolling of channel sections is described. Finally, areas of potential future work are discussed.

The application of robotics to the turbine blade encapsulation process

A survey of the existing state-of-the-art of turbine blade manufacture highlights two operations that have not been automated namely that of loading of a turbine blade into an encapsulation die, and that of removing a machined blade from the encapsulation block. The automation of blade decapsulation has not been pursued. In order to develop a system to automate the loading of an encapsulation die a prototype mechanical handling robot has been designed together with a computer controlled encapsulation die. The robot has been designed as a mechanical handling robot of cylindrical geometry, suitable for use in a circular work cell. It is the prototype for a production model to be called `The Cybermate'. The prototype robot is mechanically complete but due to unforeseen circumstances the robot control system is not available (the development of the control system did not form a part of this project), hence it has not been possible to fully test and assess the robot mechanical design. Robot loading of the encapsulation die has thus been simulated. The research work with regard to the encapsulation die has focused on the development of computer controlled, hydraulically actuated, location pins. Such pins compensate for the inherent positional inaccuracy of the loading robot and reproduce the dexterity of the human operator. Each pin comprises a miniature hydraulic cylinder, controlled by a standard bidirectional flow control valve. The precision positional control is obtained through pulsing of the valves under software control, with positional feedback from an 8-bit transducer. A test-rig comprising one hydraulic location pin together with an opposing spring loaded pin has demonstrated that such a pin arrangement can be controlled with a repeatability of +/-.00045'. In addition this test-rig has demonstrated that such a pin arrangement can be used to gauge and compensate for the dimensional error of the component held between the pins, by offsetting the pin datum positions to allow for the component error. A gauging repeatability of +/- 0.00015' was demonstrated. This work has led to the design and manufacture of an encapsulation die comprising ten such pins and the associated computer software. All aspects of the control software except blade gauging and positional data storage have been demonstrated. Work is now required to achieve the accuracy of control demonstrated by the single pin test-rig, with each of the ten pins in the encapsulation die. This would allow trials of the complete loading cycle to take place.

Interactive exploration of image collections on mobile devices

Image collections are ever growing and hence visual information is becoming more and more important. Moreover, the classical paradigm of taking pictures has changed, first with the spread of digital cameras and, more recently, with mobile devices equipped with integrated cameras. Clearly, these image repositories need to be managed, and tools for effectively and efficiently searching image databases are highly sought after, especially on mobile devices where more and more images are being stored. In this paper, we present an image browsing system for interactive exploration of image collections on mobile devices. Images are arranged so that visually similar images are grouped together while large image repositories become accessible through a hierarchical, browsable tree structure, arranged on a hexagonal lattice. The developed system provides an intuitive and fast interface for navigating through image databases using a variety of touch gestures. © 2012 Springer-Verlag.

Designing liposomal adjuvants for the next generation of vaccines

Liposomes not only offer the ability to enhance drug delivery, but can effectively act as vaccine delivery systems and adjuvants. Their flexibility in size, charge, bilayer rigidity and composition allow for targeted antigen delivery via a range of administration routes. In the development of liposomal adjuvants, the type of immune response promoted has been linked to their physico-chemical characteristics, with the size and charge of the liposomal particles impacting on liposome biodistribution, exposure in the lymph nodes and recruitment of the innate immune system. The addition of immunostimulatory agents can further potentiate their immunogenic properties. Here, we outline the attributes that should be considered in the design and manufacture of liposomal adjuvants for the delivery of sub-unit and nucleic acid based vaccines.

Meeting 2050 CO2 emissions reduction targets:The potential for electric vehicles

This chapter explores the potential for electric vehicles to contribute to decarbonising surface transport. Decarbonising transport is a major global challenge-meeting CO2 emissions reduction targets for 2050, with a rapidly growing, and urbanising global population.

Truly interactive approaches to browsing image databases

Image collections are ever growing and hence efficient and effective tools to manage these repositories are highly sought after. In this paper, we present effective image browsing systems that are operated on a large multi-touch environment for truly interactive exploration. Not only do image browsers pose a useful alternative to retrieval-based systems, they also provide a visualisation of the whole image collection and allow users to interactively explore particular parts of the collection. Our systems are based on the idea that visually similar images are located close to each other in the visualisation, that image thumbnails are arranged on a regular lattice (either a regular grid projected onto a sphere or a hexagonal lattice), and that large image datasets can be accessed through a hierarchical tree structure. A pilot study has shown that the presented systems do indeed work well and are preferred compared to conventional image browsers. © 2011 IEEE.