A geodesic constant method for computing high-frequency mutual coupling between antennas on general quadric cylinders

A Geodesic Constant Method (GCM) is outlined which provides a common approach to ray tracing on quadric cylinders in general, and yields all the surface ray-geometric parameters required in the UTD mutual coupling analysis of conformal antenna arrays in the closed form. The approach permits the incorporation of a shaping parameter which permits the modeling of quadric cylindrical surfaces of desired sharpness/flatness with a common set of equations. The mutual admittance between the slots on a general parabolic cylinder is obtained as an illustration of the applicability of the GCM.

Tuning and stability of a singly resonant continuous-wave optical parametric oscillator close to degeneracy

Wavelength tuning and stability characteristics of a singly resonant continuous-wave optical parametric oscillator (cw OPO) in the proximity of signal-idler degeneracy have been studied. The OPO is made singly resonant by using a Bragg grating as a spectral filter in the OPO cavity. The signal-idler frequency difference can be tuned from 0.5 to 7 THz, which makes the OPO suitable for cw THz generation by optical heterodyning. The operation of the OPO within this singly-resonant regime is characterized by a strong self-stabilization effect. A gradual transition to an unstable, doubly-resonant regime is observed for a signal-idler detuning smaller than ~ 0.5 THz.

Frequency-comb-referenced molecular spectroscopy in the mid-infrared region

A simple method for absolute frequency measurements of molecular transitions in the mid-infrared region is reported. The method is based on a cw singly-resonant optical parametric oscillator (SRO), which is tunable from 3.2 to 3.45 µm. The mid- infrared frequency of the SRO is referenced to an optical frequency comb through its pump and signal beams. Sub-Doppler spectroscopy and absolute frequency measurement of the P(7) transition of the ν3 band of CH4 are demonstrated.

Generation of Flat and Curved Membranes by Inverse-BAR Domain Proteins

Biological membranes are tightly linked to the evolution of life, because they provide a way to concentrate molecules into partially closed compartments. The dynamic shaping of cellular membranes is essential for many physiological processes, including cell morphogenesis, motility, cytokinesis, endocytosis, and secretion. It is therefore essential to understand the structure of the membrane and recognize the players that directly sculpt the membrane and enable it to adopt different shapes. The actin cytoskeleton provides the force to push eukaryotic plasma membrane in order to form different protrusions or/and invaginations. It has now became evident that actin directly co-operates with many membrane sculptors, including BAR domain proteins, in these important events. However, the molecular mechanisms behind BAR domain function and the differences between the members of this large protein family remain largely unresolved. In this thesis, the structure and functions of the I-BAR domain family members IRSp53 and MIM were thoroughly analyzed. By using several methods such as electron microscopy and systematic mutagenesis, we showed that these I-BAR domain proteins bind to PI(4,5)P2-rich membranes, generate negative membrane curvature and are involved in the formation of plasma membrane protrusions in cells e.g. filopodia. Importantly, we characterized a novel member of the BAR-domain superfamily which we named Pinkbar. We revealed that Pinkbar is specifically expressed in kidney and epithelial cells, and it localizes to Rab13-positive vesicles in intestinal epithelial cells. Remarkably, we learned that the I-BAR domain of Pinkbar does not generate membrane curvature but instead stabilizes planar membranes. Based on structural, mutagenesis and biochemical work we present a model for the mechanism of the novel membrane deforming activity of Pinkbar. Collectively, this work describes the mechanism by which I-BAR domain proteins deform membranes and provides new information about the biological roles of these proteins. Intriguingly, this work also gives evidence that significant functional plasticity exists within the I-BAR domain family. I-BAR proteins can either generate negative membrane curvature or stabilize planar membrane sheets, depending on the specific structural properties of their I-BAR domains. The results presented in this thesis expand our knowledge on membrane sculpting mechanisms and shows for the first time how flat membranes can be generated in cells.

A knowledge-based approach to pattern generation

Pattern Cognition is looked at from the functional view point. The need for knowledge in synthesizing such patterns is explained and various aspects of knowledge-based pattern generation are highlighted. This approach to the generation of patterns is detailed with a concrete example.

A Multi frequency study of Radio Intensity Variations For Active Galactic Nuclei of Different Optical Classes

A study of radio intensity variations at seven frequencies in the range 0.3 to 90 GHz for compact extragalactic radio sources classified as BL Lacs and high- and low-optical polarization quasars (HPQs and LPQs) is presented. This include the results of flux-density monitoring of 33 compact sources for three years at 327 MHz with the Ooty Synthesis Radio Telescope. The degrees of 'short-term' (tau less than about 1 yr) variability for the three optical types are found to be indistinguishable at low frequencies (less than 1 GHz), pointing to an extrinsic origin for the low-frequency variability. At high frequencies, a distinct dependence on optical type is present, the variability increasing from LPQs, through HPQs to BL Lacs. This trend persists even when only sources with ultra-flat radio spectra (alpha greater than -0.2) are considered. Implications of this for the phenomenon of high-frequency variability and the proposed unification schemes for different optical types of active galactic nuclei are discussed.

A new model for the breakage frequency of drops in turbulent stirred dispersions

A model of drop breakage in turbulent stirred dispersions based on interaction of a drop with eddies of a length scale smaller than the drop diameter has been developed. It predicts that, unlike the equal breakage assumed by earlier models, a large drop reduces in size due to stripping of smaller segments off it through unequal breakage. It is only when the drop nears the value of the maximum stable drop diameter that it breaks into equal parts. This new model of drop breakage, coupled with the pattern of interaction of drops with eddies of different sizes existing in the vessel, has been used to evaluate not only the breakage frequency, but also the size distribution of the daughter droplets(which was hitherto assumed). The model has been incorporated in the population balance equation and the resulting cumulative size distributions compared with those availble in the literature.

Lumettoman maan routaolojen mallintaminen ja ennustettavuus muuttuvassa ilmastossa

Raportissa on arvioitu ilmastonmuutoksen vaikutusta Suomen maaperän talviaikaiseen jäätymiseen lämpösummien perusteella. Laskelmat kuvaavat roudan paksuutta nimenomaisesti lumettomilla alueilla, esimerkiksi teillä, joilta satanut lumi aurataan pois. Luonnossa lämpöä eristävän lumipeitteen alla routaa on ohuemmin kuin tällaisilla lumettomilla alueilla. Toisaalta luonnollisessa ympäristössä paikalliset erot korostuvat johtuen mm. maalajeista ja kasvillisuudesta. Roudan paksuudet laskettiin ensin perusjakson 1971–2000 ilmasto-oloissa talviaikaisten säähavaintotietoihin pohjautuvien lämpötilojen perusteella. Sen jälkeen laskelmat toistettiin kolmelle tulevalle ajanjaksolle (2010–2039, 2040–2069 ja 2070–2099) kohottamalla lämpötiloja ilmastonmuutosmallien ennustamalla tavalla. Laskelman pohjana käytettiin 19 ilmastomallin A1B-skenaarioajojen keskimäärin simuloimaa lämpötilan muutosta. Tulosten herkkyyden arvioimiseksi joitakin laskelmia tehtiin myös tätä selvästi heikompaa ja voimakkaampaa lämpenemisarviota käyttäen. A1B-skenaarion mukaisen lämpötilan nousun toteutuessa nykyisiä mallituloksia vastaavasti routakerros ohenee sadan vuoden aikana Pohjois-Suomessa 30–40 %, suuressa osassa maan keski- ja eteläosissa 50–70 %. Jo lähivuosikymmeninä roudan ennustetaan ohentuvan 10–30 %, saaristossa enemmän. Mikäli lämpeneminen toteutuisi voimakkaimman tarkastellun vaihtoehdon mukaisesti, roudan syvyys pienenisi tätäkin enemmän. Roudan paksuuden vuosienvälistä vaihtelua ja sen muuttumista tulevaisuudessa pyrittiin myös arvioimaan. Leutoina talvina routa ohenee enemmän kuin normaaleina tai ankarina pakkastalvina. Päivittäistä sään vaihtelua simuloineen säägeneraattorin tuottamassa aineistoissa esiintyi kuitenkin liian vähän hyvin alhaisia ja hyvin korkeita lämpötiloja. Siksi näitten lämpötilatietojen pohjalta laskettu roudan paksuuskin ilmeisesti vaihtelee liian vähän vuodesta toiseen. Kelirikkotilanteita voi esiintyä myös kesken routakauden, jos useamman päivän suojasää ja samanaikainen runsas vesisade pääsevät sulattamaan maata. Tällaiset routakauden aikana sattuvat säätilat näyttävätkin yleistyvän lähivuosikymmeninä. Vuosisadan loppua kohti ne sen sijaan maan eteläosissa jälleen vähenevät, koska routakausi lyhenee oleellisesti. Tulevia vuosikymmeniä koskevien ilmastonmuutosennusteiden ohella routaa ja kelirikon esiintymistä on periaatteessa mahdollista ennustaa myös lähiaikojen sääennusteita hyödyntäen. Pitkät, viikkojen tai kuukausien mittaiset sääennusteet eivät tosin ole ainakaan vielä erityisen luotettavia, mutta myös lyhyemmistä ennusteista voisi olla hyötyä mm. tienpitoa suunniteltaessa.

Biomass gasification: Environmentally sound technology for decentralized power generation, a case study from India

This study aims at understanding the need for decentralized power generation systems and to explore the potential, feasibility and environmental implications of biomass gasifier-based electricity generation systems for village electrification. Electricity needs of villages are in the range of 5–20 kW depending on the size of the village. Decentralized power generation systems are desirable for low load village situations as the cost of power transmission lines is reduced and transmission and distribution losses are minimised. A biomass gasifier-based electricity generation system is one of the feasible options; the technology is readily available and has already been field tested. To meet the lighting and stationary power needs of 500,000 villages in India the land required is only 16 Mha compared to over 100 Mha of degraded land available for tree planting. In fact all the 95 Mt of woody biomass required for gasification could be obtained through biomass conservation programmes such as biogas and improved cook stoves. Thus dedication of land for energy plantations may not be required. A shift to a biomass gasifier-based power generation system leads to local benefits such as village self reliance, local employment and skill generation and promotion of in situ plant diversity plus global benefits like no net CO2 emission (as sustainable biomass harvests are possible) and a reduction in CO2 emissions (when used to substitute thermal power and diesel in irrigation pump sets).

ECG component delineation by Prony's method

A simple, non-iterative method for component wave delineation from the electrocardiogram (ECG) is derived by modelling its discrete cosine transform (DCT) as a sum of damped cosinusoids. Amplitude, phase, damping factor and frequency parameters of each of the cosinusoids are estimated by the extended Prony method. Different component waves are represented by non-overlapping clusters of model poles in the z plane and thus a component wave is derived by the addition of the inverse transformed (IDCT) impulse responses of the poles in the cluster. Akaike's information criterion (AIC) is used to determine the model order. The method performed satisfactory even in the presence of artifacts. The efficacy of the method is illustrated by analysis of continuous strips of ECG data.

Evolution of and preconditions for generation of corrugations on a plane surface in rolling contact

A hard roller under normal load is driven by the flat surface of a soft disc. Corrugations are generated on the disc when certain surface morphological, load, speed and mechanical property-oriented conditions are met. The evolutionary process of corrugation generation and the preconditions necessary for it are investigated morphologically and mechanically for four disc materials: mild steel, brass, PTFE and PMMA.