Equilibrium of the simultaneous etherification ofisobutene and isoamylenes with ethanol inliquid-phase

The simultaneous etherification of isobutene and isoamylenes with ethanol has been studied using macroreticu-lar acid ion-exchange resins as catalyst. Most of the experiments were carried out over Amberlyst-35. In addition,Amberlyst-15 and Purolite CT-275 were also tested. Chemical equilibrium of four chemical reactions was studied:ethyl tert-butyl ether formation, tert-amyl ethyl ether formation from isoamylenes (2-methyl-1-butene and 2-methyl-2-butene) and isomerization reaction between both isoamylenes. Equilibrium data were obtained in a batchwisestirred tank reactor operated at 2.0 MPa and within the temperature range from 323 to 353 K. Experimental molarstandard enthalpy and entropy changes of reaction were determined for each reaction. From these data, the molarenthalpy change of formation of ethyl tert-butyl ether and tert-amyl ethyl ether were estimated. Besides, the chemical equilibrium between both diisobutene dimers, 2,4,4-trimethyl-1-pentene and 2,4,4-trimethyl-2-pentene, wasevaluated. A good agreement between thermodynamic results for the simultaneous etherification carried out in thiswork and those obtained for the isolated ethyl tert-butyl ether and tert-amyl ethyl ether systems was obtained.

Large Break Blowdown Test Facility Study

Työn tarkoituksena on kerätä yhteen tiedot kaikista maailmalta löytyvistä ison LOCA:n ulospuhallusvaiheen tutkimiseen käytetyistä koelaitteistoista. Työn tarkoituksena on myös antaa pohjaa päätökselle, onko tarpeellista rakentaa uusi koelaitteisto nesterakenne-vuorovaikutuskoodien laskennan validoimista varten. Ennen varsinaisen koelaitteiston rakentamista olisi tarkoituksenmukaista myös rakentaa pienempi pilottikoelaitteisto, jolla voitaisiin testata käytettäviä mittausmenetelmiä. Sopivaa mittausdataa tarvitaan uusien CFD-koodien ja rakenneanalyysikoodien kytketyn laskennan validoimisessa. Näitä koodeja voidaan käyttää esimerkiksi arvioitaessa reaktorin sisäosien rakenteellista kestävyyttä ison LOCA:n ulospuhallusvaiheen aikana. Raportti keskittyy maailmalta löytyviin koelaitteistoihin, uuden koelaitteiston suunnitteluperusteisiin sekä aiheeseen liittyviin yleisiin asioihin. Raportti ei korvaa olemassa olevia validointimatriiseja, mutta sitä voi käyttää apuna etsittäessä validointitarkoituksiin sopivaa ison LOCA:n ulospuhallusvaiheen koelaitteistoa.

Sistematização do estudo anatômico do aqueduto vestibular por tomografia computadorizada de alta resolução em pacientes com doenças de Ménière unilateral

OBJETIVO: Sistematizar a avaliação do aqueduto vestibular por tomografia computadorizada de alta resolução (TCAR) em pacientes com doença de Ménière unilateral e comparar com um grupo-controle. MATERIAIS E MÉTODOS: Selecionamos 20 pacientes com doença de Ménière unilateral, segundo critérios da Academia Americana de Otorrinolaringologia - Cirurgia de Cabeça e Pescoço, e um grupo-controle composto por dez indivíduos com avaliação auditiva normal, totalizando 60 orelhas, distribuídas igualmente em três grupos: grupo I - doença de Ménière, orelha comprometida; grupo II - doença de Ménière, orelha não-comprometida; grupo III - controle. Submetemos os pacientes à TCAR de ossos temporais. O estudo das imagens foi feito de modo cego, procurando avaliar a visibilidade da porção descendente do aqueduto vestibular. Os dados obtidos foram correlacionados com os respectivos grupos. RESULTADOS: A visualização do aqueduto vestibular foi de 95% no grupo I, 90% no grupo II e 100% no grupo III. CONCLUSÃO: É possível sistematizar a avaliação por TCAR do aqueduto vestibular, com aquisição axial, usando a mesma técnica radiológica, conhecimento anatômico e seguimento seqüencial das estruturas da orelha interna. Com esta sistematização houve alta taxa de visualização do aqueduto vestibular, sem diferença estatisticamente significante entre os grupos.

Cartographie et analyse des données disponibles pour estimer le nombre de préservatifs écoulés sur le marché suisse en une année

L'Office fédéral de la santé publique (OFSP) a mandaté la Fédération romande des consommateurs (FRC) et l'Institut universitaire de médecine sociale et préventive (IUMSP) pour réaliser une cartographie du marché des préservatifs et analyser les données disponibles pour estimer le nombre de préservatifs écoulés sur le marché suisse en une année. Les données disponibles identifiées sont les suivantes : 1. Données Verein : l'Association pour le label de qualité des préservatifs possède des données sur le nombre de préservatifs testés chaque année pour l'obtention du label OK. Ces données constituent une estimation du nombre de préservatifs ayant suivi la procédure de certification du label OK. Ces dernières années, des entreprises auraient renoncé à leur collaboration avec l'association pour le label de qualité, ce qui réduit la fiabilité de cette méthode pour suivre l'évolution du marché des préservatifs en Suisse. 2. Données douanes : l'Administration fédérale des douanes établit une statistique du commerce extérieur et met à disposition une base de données qui donne accès aux données statistiques d'importation et d'exportation de préservatifs. Etant donné que cette statistique se base sur les données indiquées par les importateurs et les exportateurs, des erreurs de déclaration peuvent être commises. 3. Données IUMSP : entre 1986 et 2011, l'IUMSP a reçu des producteurs/importateurs des données de mises sur le marché de préservatifs. Ces données, fiables car provenant directement des producteurs/importateurs, ne sont malheureusement plus complètes depuis 2012, en raison d'une difficulté croissante à obtenir de telles informations. 4. Données Nielsen et IMS Health : Nielsen et IMS HEalth sont des entreprises privées qui recensent les données de vente des préservatifs en Suisse réalisées dans les commerces de détail, ainsi que dans les drogueries et pharmacies. Ces données constituent des données de vente réelles obtenues grâce à l'enregistrement des mouvements de la marchandise lors du passage en caisse dans les magasins. La couverture des points de vente est élevée (près de 80% pour les données Nielsen) et stable dans le temps.

Pilas de combustible soportadas sobre el anodo de una sola camara basadas en electrolitos de ceria dopada con Gd

La utilización de electrolitos soportados en el ánodo es una estrategia muy útil para mejorar las propiedades eléctricas de las pilas de combustible de óxido sólido, debido a que permiten disminuir considerablemente el espesor de los electrolitos. Para este trabajo, se han preparado exitosamente pilas de combustible de óxido sólido con electrolitos de ceria dopada con Gd, Ce1-xGdxO2-y (CGO) soportados sobre un ánodo formado por un cermet de Ni/CGO. Dichas pilas se han instalado y caracterizado en un reactor de una sola cámara donde se ha hecho circular una mezcla de propano y aire. Para ello, se han preparado mezclas de polvos de NiO y de ceria dopada con gadolinia, con diferentes composiciones y tamaño de partículas, para obtener los ánodos con porosidades apropiadas y así utilizarlos como soporte del electrolito en las pilas. Los polvos de los electrolitos de CGO se han preparado por la técnica sol-gel y se han depositado por"dip coating" con diferentes espesores (15-30 ¿m) utilizando una tinta preparada a partir de partículas nanométricas dispersadas en una resina comercial. Los cátodos de La1-xSrxCoO3-S (LSCO) se han preparado también por la técnica sol-gel y se han depositado sobre la capa fina del electrolito. Finalmente, las propiedades eléctricas se han determinado en un reactor de una sola cámara dónde el propano se ha mezclado con aire sintético por encima del límite superior de inflamabilidad. En estas condiciones experimentales se han obtenido altas densidades de potencia estables, controlando las velocidades de flujo total de gas transportador y la presión parcial de propano.

Pilas de combustible de una sola camara, basadas en electrolitos de ceria dopada con gadolinia y operadas con metano y propano

La principal ventaja de las pilas de combustible de óxido sólido (SOFCs) de una sola cámara, frente a las bicamerales convencionales, es que permiten simplificar el diseño del dispositivo y operar con mezclas de hidrocarburos (metano, propano...) y aire, sin necesidad de separar ambos gases, por medio del uso de electrodos selectivos a la oxidación del combustible y reducción del oxidante. En el presente trabajo, se han fabricado monopilas soportadas sobre electrolitos de ceria dopada con gadolinia (GDC), de 200 ¿m de espesor, usando Ni-GDC como ánodo y LSC(La0.5Sr0.5CoO3-¿)-GDC-Ag2O como cátodo. Las propiedades eléctricas de la celda se determinaron en un reactor de una sola cámara, usando mezclas de metano + aire y propano + aire. Se investigó la influencia de la temperatura, de las presiones parciales del combustible y oxígeno, y de la velocidad de flujo total sobre el rendimiento de las pilas preparadas. Así, la densidad de potencia se incrementó fuertemente con el aumento de la temperatura, la velocidad de flujo total y la composición de hidrocarburo. Una vez se optimizaron los parámetros operacionales, la celda presentó unas densidades de potencia máximas de 70 y 320 mW/ cm2, operando con propano a 600ºC y con metano a 795ºC, respectivamente.

Médecines complémentaires dans le canton de Vaud : recours et offres actuels, principaux enjeux sanitaires et possibilités de réglementation.

Selon les données de l'Enquête suisse sur la santé (ESS), le canton de Vaud comprend une des plus grandes proportions d'utilisateurs de médecines complémentaires « au cours des 12 derniers mois » en Suisse (30% en 2012). L'homéopathie, la phytothérapie et l'acupuncture sont les thérapies les plus prisées. L'auto-recours dans le domaine des médecines complémentaires est difficile à estimer. Sur la base des quelques études disponibles en Suisse, ce phénomène paraît néanmoins fréquent. Selon une enquête téléphonique conduite auprès d'un échantillon représentatif d'adultes en Suisse, seuls 34% des répondant/es consultant des thérapeutes non-médecins affirment en informer toujours leurs médecins traitants.

An automated microreactor for semi-continuous biosensor measurements.

Living bacteria or yeast cells are frequently used as bioreporters for the detection of specific chemical analytes or conditions of sample toxicity. In particular, bacteria or yeast equipped with synthetic gene circuitry that allows the production of a reliable non-cognate signal (e.g., fluorescent protein or bioluminescence) in response to a defined target make robust and flexible analytical platforms. We report here how bacterial cells expressing a fluorescence reporter ("bactosensors"), which are mostly used for batch sample analysis, can be deployed for automated semi-continuous target analysis in a single concise biochip. Escherichia coli-based bactosensor cells were continuously grown in a 13 or 50 nanoliter-volume reactor on a two-layered polydimethylsiloxane-on-glass microfluidic chip. Physiologically active cells were directed from the nl-reactor to a dedicated sample exposure area, where they were concentrated and reacted in 40 minutes with the target chemical by localized emission of the fluorescent reporter signal. We demonstrate the functioning of the bactosensor-chip by the automated detection of 50 μgarsenite-As l(-1) in water on consecutive days and after a one-week constant operation. Best induction of the bactosensors of 6-9-fold to 50 μg l(-1) was found at an apparent dilution rate of 0.12 h(-1) in the 50 nl microreactor. The bactosensor chip principle could be widely applicable to construct automated monitoring devices for a variety of targets in different environments.

Projeto e construção de um bioreator para síntese orgânica assimétrica catalisada por saccharomyces cerevisiae (fermento biológico de padaria)

A model for the construction of a simple and cheap apparatus to be used as bioreactor for reactions catalyzed by baker's yeast (Saccharomyces cerevisiae) is described. The bioconversion and separation of cells from products and residual substrates are obtained at the same time. The reactions carried out in this type of reactor are faster than those catalyzed by immobilized cells. Yeast cells can be cultivated in this bioreactor operating with cell recycling at appropriated conditions using glucose and other nutrients.

High voltage discharge for degradation of organic contaminants in water

The pulsed dielectric barrier discharge (PDBD) and pulsed corona discharge (PCD) were compared for their efficiency to degrade phenol in water solution. Results show that PCD has higher efficiency than PDBD to degrade phenol. When initial pH of water solution was elevated, phenol degradation in the PCD reactor was significantly enhanced, although no considerable effect was seen in the PDBD reactor. The PCD reactor was also able to degrade lignin significantly, both in synthetically prepared solution and in pulp and paper mill wastewater. Water temperature did not affect phenol degradation; however, lignin was better oxidized at lower temperature.

Ydinreaktorin painesäiliön ulkoisen jäähdytyksen lämmönsiirtokokeita

The purpose of this work was to design and carry out thermal-hydraulic experiments dealing with overcooling transients of a VVER-440-type nuclear reactor pressure vessel. Sudden overcooling accident could have negative effect on the mechanical strength of the pressure vessel. If part of the pressure vessel is compromised, the intense pressure inside a pressurized water reactor could cause the wall to fracture. Information on the heat transfer along the outside of the pressure vessel wall is necessary for stress analysis. Basic knowledge of the overcooling accident and heat transfer types on the outside of the pressure vessel is presented as background information. Test facility was designed and built based to study and measure heat transfer during specific overcooling scenarios. Two test series were conducted with the first one concentrating on the very beginning of the transient and the second one concentrating on steady state heat transfer. Heat transfer coefficients are calculated from the test data using an inverse method, which yields better results in fast transients than direct calculation from the measurement results. The results show that heat transfer rate varies considerably during the transient, being very high in the beginning and dropping to steady state in a few minutes. The test results show that appropriate correlations can be used in future analysis.

Decomposição catalítica de óleo de soja em presença de diferentes zeólitas

The catalytic decomposition of soybean oil was studied in a fix bed reactor at 673 and 773 K and using amorphous silica-alumina and the zeolites USY, H-Mordenite and H-ZSM-5 as catalysts. Both the selectivity and the catalytic activity were determined by studying the product composition resulting from the chemical reactions. Physicochemical characteristics of the catalysts were obtained by X-ray fluorescence, Fourier Transform infrared spectroscopy, 29Si and 27Al Nuclear Magnetic Ressonance and textural analysis. The zeolites USY and H-ZSM-5, showing higher Brönsted acidity, yielded products with higher concentration in aromatic hydrocarbons, whereas with both H-Mordenite and amorphous silica-alumina the main products were paraffins.

Calcination of aluminum hydroxide over pressure and residence time

This work investigates the possible effect of pressure and residence time to the reaction of aluminum hydroxide into aluminum oxide. Various pressurized conditions are used as well as the help of various residence times. The aim is to increase the conversion of the reaction with the use of different pressures and residence times. The tests were performed with a laboratory scale fluidized bed reactor at the Outotec R&D Center in Frankfurt. Additional test work such as particle size analysis and differential thermal analysis were also carried out. Some calcined samples were also characterized with X-ray diffraction at the University of Auckland to obtain a reaction pathway when using pressurized conditions. All of the results are then compared with previous results.

Titulador potenciométrico automatizado baseado em sistema de fluxo monossegmentado

A new automated system for acid-base flow titrations is proposed. In the operation mode, several sample to titrant volumetric ratios are injected in an air segmented plug. Five three way solenoid valves and three acrilic junctions, assembled in a hidrodynamic injection system, were accountable for the monosegmented reagents plug formation. A turbulent flow reactor was used for a perfect mix of reagents in the plug. The detector system employed a glass combined electrode fitted in an acrilic holder. Titrations of hydrochloric, nitric and acetic acids, in several concentrations, were performed with standard sodium hidroxide, for evaluation of the efficiency of the system. The relative standard deviation of the determinations was about ±0,5% and each titration was carried out in 3-4 minutes. A Quick BASIC 4.5® program was developed for the titrator control.