A model for enhancing assessment and teaching practice at the coalface : Insights from a Fellow-In-Residence engagement program

Australian universities are currently engaging with new governmental policies and regulations that require them to demonstrate enhanced quality and accountability in teaching and research. The development of national academic standards for learning outcomes in higher education is one such instance of this drive for excellence. These discipline-specific standards articulate the minimum, or Threshold Learning Outcomes, to be addressed by higher education institutions so that graduating students can demonstrate their achievement to their institutions, accreditation agencies, and industry recruiters. This impacts not only on the design of Engineering courses (with particular emphasis on pedagogy and assessment), but also on the preparation of academics to engage with these standards and implement them in their day-to-day teaching practice on a micro level. This imperative for enhanced quality and accountability in teaching is also significant at a meso level, for according to the Australian Bureau of Statistics, about 25 per cent of teachers in Australian universities are aged 55 and above and more than 54 per cent are aged 45 and above (ABS, 2006). A number of institutions have undertaken recruitment drives to regenerate and enrich their academic workforce by appointing capacity-building research professors and increasing the numbers of early- and mid-career academics. This nationally driven agenda for quality and accountability in teaching permeates also the micro level of engineering education, since the demand for enhanced academic standards and learning outcomes requires both a strong advocacy for a shift to an authentic, collaborative, outcomes-focused education and the mechanisms to support academics in transforming their professional thinking and practice. Outcomes-focused education means giving greater attention to the ways in which the curriculum design, pedagogy, assessment approaches and teaching activities can most effectively make a positive, verifiable difference to students’ learning. Such education is authentic when it is couched firmly in the realities of learning environments, student and academic staff characteristics, and trustworthy educational research. That education will be richer and more efficient when staff works collaboratively, contributing their knowledge, experience and skills to achieve learning outcomes based on agreed objectives. We know that the school or departmental levels of universities are the most effective loci of changes in approaches to teaching and learning practices in higher education (Knight & Trowler, 2000). Heads of Schools are being increasingly entrusted with more responsibilities - in addition to setting strategic directions and managing the operational and sometimes financial aspects of their school, they are also expected to lead the development and delivery of the teaching, research and other academic activities. Guiding and mentoring individuals and groups of academics is one critical aspect of the Head of School’s role. Yet they do not always have the resources or support to help them mentor staff, especially the more junior academics. In summary, the international trend in undergraduate engineering course accreditation towards the demonstration of attainment of graduate attributes poses new challenges in addressing academic staff development needs and the assessment of learning. This paper will give some insights into the conceptual design, implementation and empirical effectiveness to date, of a Fellow-In-Residence Engagement (FIRE) program. The program is proposed as a model for achieving better engagement of academics with contemporary issues and effectively enhancing their teaching and assessment practices. It will also report on the program’s collaborative approach to working with Heads of Schools to better support academics, especially early-career ones, by utilizing formal and informal mentoring. Further, the paper will discuss possible factors that may assist the achievement of the intended outcomes of such a model, and will examine its contributions to engendering an outcomes-focussed thinking in engineering education.

Integration of opinion into customer analysis model

As e-commerce is becoming more and more popular, the number of customer reviews that a product receives grows rapidly. In order to enhance customer satisfaction and their shopping experiences, it has become important to analysis customers reviews to extract opinions on the products that they buy. Thus, Opinion Mining is getting more important than before especially in doing analysis and forecasting about customers’ behavior for businesses purpose. The right decision in producing new products or services based on data about customers’ characteristics means profit for organization/company. This paper proposes a new architecture for Opinion Mining, which uses a multidimensional model to integrate customers’ characteristics and their comments about products (or services). The key step to achieve this objective is to transfer comments (opinions) to a fact table that includes several dimensions, such as, customers, products, time and locations. This research presents a comprehensive way to calculate customers’ orientation for all possible products’ attributes.

Principals, Teachers, and Student's Perception of the Information and Communication Technology in Kuwait Secondary Schools (Rhetoric and reality)

ICT integration has been advocated to provide opportunities to improve students’ achievement and engagement through transforming the educational setting. A valuable tool that contributes in enhancing and developing students’ cognitive skills for lifelong learning, ICT integration has introduced a new educational philosophy, shifting the role of students into a more central position in the pedagogical processes. Kuwait, as with many other countries, has recently planned ICT integration to develop its citizen’s capacities. This study sought to capture the principals’, teachers’, and students’ perceptions of ICT integration in pedagogical activities, as well as how ICT is being used for learning and teaching activities in three ICT leading Kuwaiti secondary schools. Interviews with principals, teachers, and students were conducted, along with an open-ended questionnaire for the teachers, researcher observations, and document analysis. The findings revealed that ICT integration in Kuwait needed to be reinforced to accomplish the ICT integration objectives. A call for further support for teachers, and a reconsideration of the ICT integration strategies were also recommended.

Assessment of the application of contingent valuation theory to bio-sequestered carbon

The issue of carbon sequestration rights has become topical following the United Nations Convention on Climate Change (United Nations 1992 at page 1414) and the subsequent Kyoto Protocol (United Nations Climate Change Secretariat 1998) which identified emissions trading as one of the mechanisms to reduce greenhouse gas emissions. Australian states have responded by creating a legal framework for the recognition of rights to bio-sequestered carbon. There is a lack of uniformity in the approach of each state to the recognition of these rights, which vary from the creation of new and novel interests in land to the adoption of more traditional rights such as a profit a prendre. Rights to bio-sequestered carbon are likely to have an impact on the utility, marketability, value and financing of rural land holdings. Despite the creation of the legal framework for recognition of rights to sequestrated carbon, there has been a delay in the introduction of a formalised carbon trading scheme in Australia. In the absence of an established carbon market, this paper addresses the applicability of contingent valuation theory to assess the value of bio-sequestered carbon rights to a rural land holder. Limitations and potential controversies associated with this application of contingent valuation theory are also addressed in this paper.

Conceptualising, operationalising and measuring the player experience in videogames

The player experience is at the core of videogame play. Understanding the facets of player experience presents many research challenges, as the phenomenon sits at the intersection of psychology, design, human-computer interaction, sociology, and physiology. This workshop brings together an interdisciplinary group of researchers to systematically and rigorously analyse all aspects of the player experience. Methods and tools for conceptualising, operationalising and measuring the player experience form the core of this research. Our aim is to take a holistic approach to identifying, adapting and extending theories and models of the player experience, to understand how these theories and models interact, overlap and differ, and to construct a unified vision for future research.

Brisbane : creative city, cinema city?

Brisbane stands at the cross roads of many major economic, social and cultural opportunities as it positions itself as a cosmopolitan, globally networked metropolis of the twenty-first century. In order to link and leverage the existing screen industries infrastructure into Brisbane’s creative city’s plans, the paper argues for a re-think of the existing policy frameworks that support Australian screen culture and the national screen industries. Instead of remaining premised on a separation of these two activities the paper argues for a greater recognition of the overlaps occurring in both production and consumption of screen content. By acknowledging the impact new media technologies and social behaviours and the way they are re-shaping media consumption and media production practices, film and media policy could be better positioned to complement the emerging creative city policy frameworks that are being fostered in a city like Brisbane. The paper argues that reconsideration of the culture/industry separation that characterizes contemporary policy settings underpinning Australian media and screen production assistance would not only assist in identifying crucial synergies within a creative city policy it would also invigorate policy settings for the screen industries and enable them to connect more efficiently to a shifting film and media production and consumption landscape.

An informal community of practice : the case of the DEHub Virtual Worlds Working Group

The DEHub Virtual Worlds Working Group has an informal membership of nearly 200 members with an interest in education and virtual worlds within the Australian and New Zealand context. Members come from a variety of academic disciplines and may be teaching or research academics, Research Higher Degree candidates, project managers, virtual world builders and developers. The group acts as an informal Community of Practice, facilitating learning and the transfer of skills through social contact, opportunities to collaborate on projects and publications, and through the sharing of knowledge and experience. This poster provides a snapshot of the activity of this highly active group.

Damage assessment in reinforced concrete flexural members using modal strain energy based method

Damage assessment (damage detection, localization and quantification) in structures and appropriate retrofitting will enable the safe and efficient function of the structures. In this context, many Vibration Based Damage Identification Techniques (VBDIT) have emerged with potential for accurate damage assessment. VBDITs have achieved significant research interest in recent years, mainly due to their non-destructive nature and ability to assess inaccessible and invisible damage locations. Damage Index (DI) methods are also vibration based, but they are not based on the structural model. DI methods are fast and inexpensive compared to the model-based methods and have the ability to automate the damage detection process. DI method analyses the change in vibration response of the structure between two states so that the damage can be identified. Extensive research has been carried out to apply the DI method to assess damage in steel structures. Comparatively, there has been very little research interest in the use of DI methods to assess damage in Reinforced Concrete (RC) structures due to the complexity of simulating the predominant damage type, the flexural crack. Flexural cracks in RC beams distribute non- linearly and propagate along all directions. Secondary cracks extend more rapidly along the longitudinal and transverse directions of a RC structure than propagation of existing cracks in the depth direction due to stress distribution caused by the tensile reinforcement. Simplified damage simulation techniques (such as reductions in the modulus or section depth or use of rotational spring elements) that have been extensively used with research on steel structures, cannot be applied to simulate flexural cracks in RC elements. This highlights a big gap in knowledge and as a consequence VBDITs have not been successfully applied to damage assessment in RC structures. This research will address the above gap in knowledge and will develop and apply a modal strain energy based DI method to assess damage in RC flexural members. Firstly, this research evaluated different damage simulation techniques and recommended an appropriate technique to simulate the post cracking behaviour of RC structures. The ABAQUS finite element package was used throughout the study with properly validated material models. The damaged plasticity model was recommended as the method which can correctly simulate the post cracking behaviour of RC structures and was used in the rest of this study. Four different forms of Modal Strain Energy based Damage Indices (MSEDIs) were proposed to improve the damage assessment capability by minimising the numbers and intensities of false alarms. The developed MSEDIs were then used to automate the damage detection process by incorporating programmable algorithms. The developed algorithms have the ability to identify common issues associated with the vibration properties such as mode shifting and phase change. To minimise the effect of noise on the DI calculation process, this research proposed a sequential order of curve fitting technique. Finally, a statistical based damage assessment scheme was proposed to enhance the reliability of the damage assessment results. The proposed techniques were applied to locate damage in RC beams and slabs on girder bridge model to demonstrate their accuracy and efficiency. The outcomes of this research will make a significant contribution to the technical knowledge of VBDIT and will enhance the accuracy of damage assessment in RC structures. The application of the research findings to RC flexural members will enable their safe and efficient performance.

Linking scientific evidence and decision making : A case study of hand hygiene interventions

We consider how data from scientific research should be used for decision making in health services. Whether a hand hygiene intervention to reduce risk of nosocomial infection should be widely adopted is the case study. Improving hand hygiene has been described as the most important measure to prevent nosocomial infection. 1 Transmission of microorganisms is reduced, and fewer infections arise, which leads to a reduction in mortality2 and cost savings.3 Implementing a hand hygiene program is itself costly, so the extra investment should be tested for cost-effectiveness.4,5 The first part of our commentary is about cost-effectiveness models and how they inform decision making for health services. The second part is about how data on the effectiveness of hand hygiene programs arising from scientific studies are used, and 2 points are made: the threshold for statistical inference of .05 used to judge effectiveness studies is not important for decision making,6,7 and potentially valuable evidence about effectiveness might be excluded by decision makers because it is deemed low quality.8 The ideas put forward will help researchers and health services decision makers to appraise scientific evidence in a more powerful way.

Fourth wall removed : womens' liberation or entrapment?

Australian dramatic literature of the 1950s and 1960s heralded a new wave in theatre and canonised a unique Australian identity on local and international stages. In previous decades, Australian theatre had been abound with the mythology of the wide brown land and the outback hero. This rural setting proved remote to audiences and sat uneasily within the conventions of the naturalist theatre. It was the suburban home that provided the back drop for this postwar evolution in Australian drama. While there were a number of factors that contributed to this watershed in Australian theatre, little has been written about how the spatial context may have influenced this movement. With the combined effects of postwar urbanization and shifting ideologies around domesticity, a new literary landscape had been created for playwrights to explore. Australian playwrights such as Dorothy Hewett, Ray Lawler and David Williamson transcended the outback hero by relocating him inside the postwar home. The Australian home of the 1960s slowly started subscribing to a new aesthetic of continuous living spaces and patios that extended from the exterior to the interior. These mass produced homes employed diluted spatial principles of houses designed by architects, Le Corbusier, Ludwig Mies Van der Rohe and Adolf Loos in the 1920s and 1930s. In writing about Adolf Loos’ architecture, Beatriz Colomina described the “house as a stage for the family theatre”. She also wrote that the inhabitants of Loos’ houses were “both actors and spectators of the family scene involved”. It has not been investigated as to whether this new capacity to spectate within the home was a catalyst for playwrights to reflect upon, and translate the domestic environment to the stage. Audiences were also accustomed to being spectators of domesticity and could relate to the representations of home in the theatre. Additionally, the domestic setting provided a space for gender discourse; a space in which contestations of masculine and feminine identities could be played out. This research investigates whether spectating within the domestic setting contributed to the revolution in Australian dramatic literature of the 1950s and 1960s. The concept of the spectator in domesticity is underpinned by the work of Beatriz Colomina and Mark Wigley. An understanding of how playwrights may have been influenced by spectatorship within the home is ascertained through interviews and biographical research. The paper explores playwrights’ own domestic experiences and those that have influenced the plays they wrote and endeavours to determine whether seeing into the home played a vital role in canonising the Australian identity on the stage.

Labor market reform and the changing structure of wage determination in China's state sector during the 1980s

China's market-oriented labor market reform has been in place for about one and a half decades. This study uses individual data for 1981 and 1987 to examine the success of the first half of the reform program. Success is evaluated by examining changes in the wage setting structure in the state-owned sector over the reform period. Have the market reforms stimulated worker incentives by increasing the returns to human capital acquisition? Has the wage structure altered to more closely mimic that of a market economy? In 1987, there is evidence of a structural change in the system of wage determination, with slightly increased rates of return to human capital. However, changes in industrial wage differentials appear to play the dominant role. It is argued that this may be due to labor market reforms, in particular the introduction of the profit related bonus scheme.J. Comp. Econom.,December 1997,25(3), pp. 403–421. Australian National University, Canberra, ACT0200, Australia and University of Tasmania, Hobart, Tasmania, Australia, and University of Aberdeen, Old Aberdeen, Scotland AB24 3QY.

iRAP Malaysia training course: Decade of Action for Road Safety. Report to Department of Foreign Affairs and Trade, Australia-Malaysia Institute

The International Road Assessment Program (iRAP) is a not-for-profit organisation that works in partnership with governments and non-government organisations in all parts of the world to make roads safe. The iRAP Malaysia pilot study on 3,700km of road identified the potential to save 31,800 deaths and serious injuries over the next 20 years from proven engineering improvements. To help ensure the iRAP data and results are available to planners and engineers, iRAP, together with staff from the Centre for Accident Research and Road Safety – Queensland (CARRS-Q) and the Malaysian Institute of Road Safety Research (MIROS) developed a 5-day iRAP training course that covers the background, theory and practical application of iRAP protocols, with a special focus on Malaysian case studies. Funding was provided by a competitive grant from the Australian-Malaysia Institute.

Social enterprises in rural community development

Social enterprises are hybrid organizational forms that combine characteristics of for-profit businesses and community sector organizations. This article explores how rural communities may use social enterprises to progress local development agendas across both economic and social domains. Drawing on qualitative case studies of three social enterprises in rural North West Tasmania, this article explores the role of social enterprises in local development processes. The case study social enterprises, despite differences in size, structure, mission and age, are strongly embedded in their local places and local communities. As deeply contextualized development actors, these social enterprises mobilize multiple resources and assets to achieve a range of local development outcomes, including but not limited to social capital

Digital storytelling as everyday activism : Queer identity, voice and networked publics

This thesis investigates the role of personal Digital Stories shared in public spaces as catalysts for social change. By analysing the influence of workshop facilitators, organisations, digital platforms and networked publics on voice and self-representation, it sheds light on shifting meanings of publicness and privacy, both face to face and online. This thesis argues that, despite numerous obstacles, the cumulative influence of diverse voices dispersed among networked publics shape new cultural norms, thereby contributing to gradual social change.

Digital soapboxes : towards an interaction design agenda for situated civic innovation

We argue that there are at least two significant issues for interaction designers to consider when creating the next generation of human interfaces for civic and urban engagement: (1) The disconnect between citizens participating in either digital or physical realms has resulted in a neglect of the hybrid role that public place and situated technology can play in contributing to civic innovation. (2) Under the veneer of many social media tools, hardly any meaningful strategies or approaches are found that go beyond awareness raising and allow citizens to do more than clicking a ‘Like’ button. We call for an agenda to design the next generation of ‘digital soapboxes’ that contributes towards a new form of polity helping citizens not only to have a voice but also to appropriate their city in order to take action for change.