Är organisationen mogen för evidensbaserad vård? : översättning och validering av Alberta Context Tool och beskrivning av sjuksköterskors skattning av kontextuella faktorer inom ortopedisk vård

Syftet med denna studie var att reliabilitetstesta Alberta Context Tool (ACT) i svensk hälso- och sjukvård och beskriva ortopedsjuksköterskors skattning av kontextuella faktorer såsom ledarskap, arbetskultur, återkoppling, utvecklingsmöjligheter och forskningsanvändning, som kan påverka möjligheten att omsätta forskningsresultat i vårdarbetet. Urvalet bestod av 119 sjuksköterskor som arbetade på ortopediska vårdavdelningar på sex olika sjukhus i mellersta Sverige. ACT är ett frågeformulär framtaget utifrån de senaste årens forskning om vilka faktorer i kontexten som har betydelse för sjuksköterskors forskningsanvändning. Reliabilitetstest gjordes enligt analys med Chronbach`s Alpa och innehållsvaliditet. Resultatet visade att ACT var relevant att användas för sjuksköterskor som arbetar på ortopedisk vårdavdelning i Sverige. Reliabilitetstesten med Chronbach´s Alpa gav värden nära 0,7 för de åtta frågeområden som behandlar kontexten.Sjuksköterskorna rapporterade att det fanns brister i många av de delar av kontexten som enligt forskning visat sig ha betydelse för möjligheten att implementera evidensbaserad vård. Sjuksköterskorna trivdes med sitt arbete och kände att deras kunskaper värderades högt i vårdteamet. Resultatet visade dock att det inte fanns tillräckligt stöd från ledningen för att utveckla vården. De rapporterade att de nästan inte alls fick återkoppling i vårdarbetet. Det saknades stödfunktioner och strategier för att implementering av forskningsresultat skulle vara möjligt att implementera i vårdarbetet. Majoriteten av sjuksköterskorna såg positivt på forskningsanvändning.

Evaluation of galling resistance for some selected combinations of tool steels/stainless steel sheet materials/lubricants using pin-on-disc testing

Stainless steels are well known to be prone to cold welding and material transfer in sliding contacts and therefore difficult to cold form unless certain precautions as discussed in this paper are taken. In the present study different combinations of tool steels/stainless steels/lubricants has been evaluated with respect to their galling resistance using pin-on-disc testing. The results show that a high galling resistance is favored by a high stainless steel sheet hardness and a blasted stainless steel sheet surface topography. The effect of type of lubricant was found to be more complex. For example, the chlorinated lubricants failed to prevent metal-to-metal contact on a brushed sheet surface but succeeded on a blasted sheet surface of the same stainless steel material. This is believed to be due to a protective tribofilm which is able to form on the blasted surface, but not on the brushed surface.

Extended local labor markets due to high speed trains : Visualization of estimations in the Swedish national travel demand forecasting tool, SAMPERS

Wider economic benefits resulting from extended geographical mobility is one argument for investments in high-speed rail. More specifically, the argument for high-speed trains in Sweden has been that they can help to further spatially extend labor market regions which in turn has a positive effect on growth and development. In this paper the aim is to cartographically visualize the potential size of the labor markets in areas that could be affected by possible future high-speed trains. The visualization is based on the forecasts of labor mobility with public transport made by the Swedish national mobility transport forecasting tool, SAMPERS, for two alternative high-speed rail scenarios. The analysis, not surprisingly, suggests that the largest impact of high-speed trains results in the area where the future high speed rail tracks are planned to be built. This expected effect on local labor market regions of high-speed trains could mean that possible regional economic development effects also are to be expected in this area. However, the results, in general, from the SAMPERS forecasts indicaterelatively small increases in local labor market potentials.

ICT as a tool in English teaching : A literature review on the use of ICT for Swedish students with learning difficulties and their literacy learning in grades 7-9

Information and communication technology (ICT) is a subject that is being discussed as a tool that is used within education around the world. Furthermore it can be seen as a tool for teachers to individualize students´ education. Students with literacy difficulties, such as dyslexia, are in constant need of new ways to learn, and new ways to be motivated to learn. The aim of this study is to see what research says in regard to how ICT can be used as a tool to help students with literacy difficulties. Literacy difficulties can be due to a number of things, such as the student has not been taught how to read, trouble within the family which can cause distress, or a neurological disorder such as dyslexia. Furthermore, the main research questions will focus on how ICT can be compared to traditional education forms, such as books and a more teacher centered education within the classroom, and whether ICT can be preferred. The results of this literature review indicates that ICT can be seen as a way for teachers to help students with literacy difficulties gain more self-esteem – something the literature tells us students with learning difficulties lack. The results also show how ICT can lead to a more individualized education. This is due to tools that increase reading comprehension and tools that give direct response when working with ICT, which helps students work more independently.

Wear of coated and uncoated PCBN cutting tool used in turning and milling

This licentiate thesis has the main focus on evaluation of the wear of coated and uncoated polycrystalline cubic boron nitride cutting tool used in cutting operations against hardened steel. And to exam the surface finish and integrity of the work material used. Harder work material, higher cutting speed and cost reductions result in the development of harder and more wear resistance cutting tools. Although PCBN cutting tools have been used in over 30 years, little work have been done on PVD coated PCBN cutting tools. Therefore hard turning and hard milling experiments with PVD coated and uncoated cutting tools have been performed and evaluated. The coatings used in the present study are TiSiN and TiAlN. The wear scar and surface integrity have been examined with help of several different characterization techniques, for example scanning electron microscopy and Auger electron spectroscopy.   The results showed that the PCBN cutting tools used displayed crater wear, flank wear and edge micro chipping. While the influence of the coating on the crater and flank wear was very small and the coating showed a high tendency to spalling. Scratch testing of coated PCBN showed that, the TiAlN coating resulted in major adhesive fractures. This displays the importance of understanding the effect of different types of lapping/grinding processes in the pre-treatment of hard and super hard substrate materials and the amount and type of damage that they can create. For the cutting tools used in turning, patches of a adhered layer, mainly consisting of FexOy were shown at both the crater and flank. And for the cutting tools used in milling a tribofilm consisting of SixOy covered the crater. A combination of tribochemical reactions, adhesive wear and mild abrasive wear is believed to control the flank and crater wear of the PCBN cutting tools. On a microscopic scale the difference phases of the PCBN cutting tool used in turning showed different wear characteristics. The machined surface of the work material showed a smooth surface with a Ra-value in the range of 100-200 nm for the turned surface and 100-150 nm for the milled surface. With increasing crater and flank wear in combination with edge chipping the machined surface becomes rougher and showed a higher Ra-value. For the cutting tools used in milling the tendency to micro edge chipping was significant higher when milling the tools steels showing a higher hard phase content and a lower heat conductivity resulting in higher mechanical and thermal stresses at the cutting edge.

Teachers’ Views on ICT as a Tool in English Teaching for Students with Dyslexia : An interview study with English teachers in grades 7-9

Information and communications technology (ICT) is a broad concept, which is often discussed in relation to the development of education. More specially, ICT can be seen as a tool to help teachers individualize students’ education. Students who have literacy difficulties, such as dyslexia, are in constant need of new techniques to help them learn and new tools to make their educational development easier. The aim of this thesis is to show what views teachers have regarding using ICT in English teaching at a sample of schools in the south of Sweden. A secondary part of the aim is to see what ICT tools, or other non ICT related methods, these teachers use to improve literacy skills for students with dyslexia.This empirical study is based on interviews with six participants. Previous research within the area is presented and different aspects of ICT within the National Agency for Education in Sweden, and the English syllabus, are also discussed. The results of this thesis show that ICT is seen as a helpful tool to make education easier for both students and teachers. Tools such as ViTal, Spell Right and Legimus are being used and the participants of the study also use iPads and Chromebooks in their teaching. According to the interviews, ICT can tribute to a fun way of learning and a more individualized education. Other non ICT related methods are also used to help students with dyslexia and these are often in terms of pictures in connection to words. These findings are based on a limited number of participants in a small area of south of Sweden. Therefore, further research is needed to see if the findings can be verified with more participants, in different parts of the country.

Health system context and implementation of evidence-based practices-development and validation of the Context Assessment for Community Health (COACH) tool for low- and middle-income settings

Background: The gap between what is known and what is practiced results in health service users not benefitting from advances in healthcare, and in unnecessary costs. A supportive context is considered a key element for successful implementation of evidence-based practices (EBP). There were no tools available for the systematic mapping of aspects of organizational context influencing the implementation of EBPs in low- and middle-income countries (LMICs). Thus, this project aimed to develop and psychometrically validate a tool for this purpose. Methods: The development of the Context Assessment for Community Health (COACH) tool was premised on the context dimension in the Promoting Action on Research Implementation in Health Services framework, and is a derivative product of the Alberta Context Tool. Its development was undertaken in Bangladesh, Vietnam, Uganda, South Africa and Nicaragua in six phases: (1) defining dimensions and draft tool development, (2) content validity amongst in-country expert panels, (3) content validity amongst international experts, (4) response process validity, (5) translation and (6) evaluation of psychometric properties amongst 690 health workers in the five countries. Results: The tool was validated for use amongst physicians, nurse/midwives and community health workers. The six phases of development resulted in a good fit between the theoretical dimensions of the COACH tool and its psychometric properties. The tool has 49 items measuring eight aspects of context: Resources, Community engagement, Commitment to work, Informal payment, Leadership, Work culture, Monitoring services for action and Sources of knowledge. Conclusions: Aspects of organizational context that were identified as influencing the implementation of EBPs in high-income settings were also found to be relevant in LMICs. However, there were additional aspects of context of relevance in LMICs specifically Resources, Community engagement, Commitment to work and Informal payment. Use of the COACH tool will allow for systematic description of the local healthcare context prior implementing healthcare interventions to allow for tailoring implementation strategies or as part of the evaluation of implementing healthcare interventions and thus allow for deeper insights into the process of implementing EBPs in LMICs.

Translating and testing the Alberta Context Tool for use among nurses in Swedish elder care

Background. There is emerging evidence that context is important for successful transfer of research knowledge into health care practice. The Alberta Context Tool (ACT) is a Canadian developed research-based instrument that assesses 10 modifiable concepts of organizational context considered important for health care professionals’ use of evidence. Swedish and Canadian health care have similarities in terms of organisational and professional aspects, suggesting that the ACT could be used for measuring context in Sweden. This paper reports on the translation of the ACT to Swedish and a testing of preliminary aspects of its validity, acceptability and reliability in Swedish elder care. Methods. The ACT was translated into Swedish and back-translated into English before being pilot tested in ten elder care facilities for response processes validity, acceptability and reliability (Cronbach’s alpha). Subsequently, further modification was performed. Results. In the pilot test, the nurses found the questions easy to respond to (52%) and relevant (65%), yet the questions’ clarity were mainly considered ‘neither clear nor unclear’ (52%). Missing data varied between 0 (0%) and 19 (12%) per item, the most common being 1 missing case per item (15 items). Internal consistency (Cronbach’s Alpha > .70) was reached for 5 out of 8 contextual concepts. Translation and back translation identified 21 linguistic- and semantic related issues and 3 context related deviations, resolved by developers and translators. Conclusion. Modifying an instrument is a detailed process, requiring time and consideration of the linguistic and semantic aspects of the instrument, and understanding of the context where the instrument was developed and where it is to be applied. A team, including the instrument’s developers, translators, and researchers is necessary to ensure a valid translation. This study suggests preliminary validity, reliability and acceptability evidence for the ACT when used with nurses in Swedish elder care.

A tool for standardized collector performance calculations including PVT

A tool for standardized calculation of solar collector performance has been developed in cooperation between SP Technical Research Institute of Sweden, DTU Denmark and SERC Dalarna University. The tool is designed to calculate the annual performance of solar collectors at representative locations in Europe. The collector parameters used as input in the tool are compiled from tests according to EN12975, without any intermediate conversions. The main target group for this tool is test institutes and certification bodies that are intended to use it for conversion of collector model parameters (derived from performance tests) into a more user friendly quantity: the annual energy output. The energy output presented in the tool is expressed as kWh per collector module. A simplified treatment of performance for PVT collectors is added based on the assumption that the thermal part of the PVT collector can be tested and modeled as a thermal collector, when the PV electric part is active with an MPP tracker in operation. The thermal collector parameters from this operation mode are used for the PVT calculations. © 2012 The Authors.