The improvement of enclosure protection class of power electronics device

Tässä diplomityössä tutkittiin vaihtoehtoja tehoelektroniikkalaitteiden kotelointiluokan kehittämiseksi. Haasteena paremman suojauksen suunnittelussa on laitteiden tuottama suuri määrä lämpöä, joka vaatii tehokkaan jäähdytyksen. Työn tuloksena saatu prototyyppi IP33 luokkaa varten täyttää standardissa SFS-EN 60529+A1 asetetut vaatimukset kyseiselle kotelointiluokalle. Rakenteessa ja valmistettavuudessa havaittiin muutama ongelma, jotka ovat korjattavissa pienillä muutoksilla. Korkeampia suojausluokkia varten testattiin IP54-luokiteltujen filtterituulettimien vaikutusta laitteen jäähdytykseen. Testien perusteella jäähdytysteho on riittävä ja filtterituulettimet todettiin toimivaksi ratkaisuksi korkeammille suojausluokille. Työn perusteella voidaan todeta, että nykyiset laitteet voidaan muokata vastaamaan IP33 luokan vaatimuksia kohtuullisen pienillä muutoksilla. Tätä korkeammat suojausluokat vaatisivat niin suuria muutoksia designiin, että todennäköisesti täysin uuden laitteen suunnittelu olis kannattavin vaihtoehto.

Käyttövarmuusanalyysin tuottama tärkeysjärjestys elintarviketeollisuuden prosessilaitteille – Suuntaviivat kustannustietoisen kunnossapitostrategian luomiselle

Hallitsematon ja reaktiivinen kunnossapito on eräs tuotannon suurimpia kustannustekijöistä. Suunnitelmallisesti ja systemaattisesti johdettuna kunnossapito on tuotantotehokkuuden suurin vaikuttaja. Merkittävä osa tuotannon tehokkuuden ylläpidosta saavutetaan laitteiden käyttövarmuudella. Käyttövarmuuden saaminen hallintaan perustuu ennakoivan kunnossapidon määrän kasvattamiseen. Samalla korjaavan kunnossapidon kustannusriski laskee ja siihen käytetty panos vähenee. Huonolla kunnossapidon suunnitelmallisuudella on päinvastaiset vaikutukset. Tavoitteena on määritellä prosessilaitteiden käyttövarmuuksiin perustuva laitekriittisyys. Tutkimuksessa yhdistetään riskien arviointimenetelmiä, joilla keskimääräiset vikavälit ja seuraukset valmistukseen mallinnetaan. Kriittisyystekijöitä ovat käytettävyys, luotettavuus, kustannustekijät, turvallisuus ja ympäristövaikutukset. Tekijöiden arvottamiseen kehitettiin riksianalyysitaulukko. Kriittisyysluokat jaettiin kolmeen kategoriaan, joista A on kriittisin, B keskinkertainen ja C on matalin luokka. Lähtötietojen keräys toteutettiin triangulaatiomenetelmää soveltaen. Empiirisessä osassa HKScan Oy:n lihanjalostustehtaan jauheliha- ja kestomakkaraosastojen laitteet jaettiin A-, B- ja C-luokkiin. Kriittisimpiä laitteita oli 20 prosenttia analysoidusta laitemäärästä. Nämä A-luokkaan sijoitetut laitteet aiheuttavat 80 prosenttia kustannusriskeistä. B-luokkaan kuuluu 50 prosenttia ja C-luokkaan 30 prosenttia laitteista. Luokittelusta erotettiin havaitut turvallisuusriskit riskienhallinnan toimenpiteitä varten. Kustannustietoinen kriittisyysluokittelu on pohja kunnossapitostrategian rakentamiselle. Tämän avuksi esitettiin taulukot huolto-ohjelman luomiseen ja luokituksien hyödyntämiseen päivittäisessä toiminnassa.

Open innovation model for a large company in the ICT industry: Case Ericsson LMF

Open innovation paradigm states that the boundaries of the firm have become permeable, allowing knowledge to flow inwards and outwards to accelerate internal innovations and take unused knowledge to the external environment; respectively. The successful implementation of open innovation practices in firms like Procter & Gamble, IBM, and Xerox, among others; suggest that it is a sustainable trend which could provide basis for achieving competitive advantage. However, implementing open innovation could be a complex process which involves several domains of management; and whose term, classification, and practices have not totally been agreed upon. Thus, with many possible ways to address open innovation, the following research question was formulated: How could Ericsson LMF assess which open innovation mode to select depending on the attributes of the project at hand? The research followed the constructive research approach which has the following steps: find a practical relevant problem, obtain general understanding of the topic, innovate the solution, demonstrate the solution works, show theoretical contributions, and examine the scope of applicability of the solution. The research involved three phases of data collection and analysis: Extensive literature review of open innovation, strategy, business model, innovation, and knowledge management; direct observation of the environment of the case company through participative observation; and semi-structured interviews based of six cases involving multiple and heterogeneous open innovation initiatives. Results from the cases suggest that the selection of modes depend on multiple reasons, with a stronger influence of factors related to strategy, business models, and resources gaps. Based on these and others factors found in the literature review and observations; it was possible to construct a model that supports approaching open innovation. The model integrates perspectives from multiple domains of the literature review, observations inside the case company, and factors from the six open innovation cases. It provides steps, guidelines, and tools to approach open innovation and assess the selection of modes. Measuring the impact of open innovation could take years; thus, implementing and testing entirely the model was not possible due time limitation. Nevertheless, it was possible to validate the core elements of the model with empirical data gathered from the cases. In addition to constructing the model, this research contributed to the literature by increasing the understanding of open innovation, providing suggestions to the case company, and proposing future steps.

Plant-plant associations and population structure of four woody plant species in a patchy coastal vegetation of Southeastern Brazil

We examined plant population structure and interspecific associations for juveniles and adults of four woody species (Andira legalis (Vell.) Toledo, Clusia hilariana Schltdl., Protium icicariba (DC.) Marchand and Vernonia crotonoides Sch. Bip. ex Baker) in a patchy vegetation on a sandy coastal plain (restinga) in SE - Brazil. We found 101 vegetation patches in a 0.5 ha grid and these were divided into two distinct size classes, with large patches (> 20 m²) containing the majority of adult individuals of the species studied. The most abundant species, P. icicariba (465 individuals) and C. hilariana (312), had actively regenerating populations, whereas A. legalis (20) and V. crotonoides (338) showed evidence of intermittent regeneration. The regeneration niches of the four species differed as did their investment in vegetative reproduction: for instance, 81% of C. hilariana seedlings were found growing inside tank-bromeliads contrasting with only 3% of P. icicariba in this habitat. Additionally, 28% of regenerants of C. hilariana originated vegetatively, contrasting with only 6% for P. icicariba. All significant associations between species found in the study were positive. There was a positive association between adults of C. hilariana and P. icicariba, as well as between adults of C. hilariana and juveniles of both. This suggests that P. icicariba is successfully establishing under the canopy of C. hilariana and highlights the role of C. hilariana in generating vegetation cover that will be later dominated by other woody plant species, as an important process for maintenance of plant diversity in this restinga vegetation.

Large-scale production and purification of recombinant protein from an insect cell/baculovirus system in Erlenmeyer flasks: application to the chicken poly(ADP-ribose) polymerase catalytic domain

A simple and inexpensive shaker/Erlenmeyer flask system for large-scale cultivation of insect cells is described and compared to a commercial spinner system. On the basis of maximum cell density, average population doubling time and overproduction of recombinant protein, a better result was obtained with a simpler and less expensive bioreactor consisting of Erlenmeyer flasks and an ordinary shaker waterbath. Routinely, about 90 mg of pure poly(ADP-ribose) polymerase catalytic domain was obtained for a total of 3 x 109 infected cells in three liters of culture

Centralized IT management using SCCM in a large multinational company

Microsoft System Center Configuration Manager is a systems management product for managing large groups of computers and/or mobile devices. It provides operating system deployment, software distribution, patch management, hardware & software inventory, remote control and many other features for the managed clients. This thesis focuses on researching whether this product is suitable for large, international organization with no previous, centralized solution for managing all such networked devices and detecting areas, where the system can be altered to achieve a more optimal management product from the company’s perspective. The results showed that the system is suitable for such organization if properly configured and clear and transparent line of communication between key IT personnel exists.

Supplier segmentation and development in project business

The purpose of this study was to expand the applicability of supplier segmentation and development approaches to the project-driven construction industry. These practices are less exploited and not well documented in this operational environment compared to the process-centric manufacturing industry. At first, portfolio models to supply base segmentation and various supplier development efforts were investigated in literature review. A step-wise framework was structured for the empirical research. The empirical study employed multiple research methods in three case studies in a large Finnish construction company. The first study categorized the construction item classes into the purchasing portfolio and positioned suppliers to the power matrix by investigating buyer-supplier relations. Using statistical tests, the study also identified factors that affect suppliers’ performance. The final case study identified improvement areas of the interface between a main contractor and one if its largest suppliers. The final results indicate that only by assessing the supply base in a holistic manner and the power circumstances in it, buyers comprehend how to best establish appropriate supplier development strategies in the project environment.

Large-eddy simulation of wind flows over complex terrains for wind energy applications

Wind energy has obtained outstanding expectations due to risks of global warming and nuclear energy production plant accidents. Nowadays, wind farms are often constructed in areas of complex terrain. A potential wind farm location must have the site thoroughly surveyed and the wind climatology analyzed before installing any hardware. Therefore, modeling of Atmospheric Boundary Layer (ABL) flows over complex terrains containing, e.g. hills, forest, and lakes is of great interest in wind energy applications, as it can help in locating and optimizing the wind farms. Numerical modeling of wind flows using Computational Fluid Dynamics (CFD) has become a popular technique during the last few decades. Due to the inherent flow variability and large-scale unsteadiness typical in ABL flows in general and especially over complex terrains, the flow can be difficult to be predicted accurately enough by using the Reynolds-Averaged Navier-Stokes equations (RANS). Large- Eddy Simulation (LES) resolves the largest and thus most important turbulent eddies and models only the small-scale motions which are more universal than the large eddies and thus easier to model. Therefore, LES is expected to be more suitable for this kind of simulations although it is computationally more expensive than the RANS approach. With the fast development of computers and open-source CFD software during the recent years, the application of LES toward atmospheric flow is becoming increasingly common nowadays. The aim of the work is to simulate atmospheric flows over realistic and complex terrains by means of LES. Evaluation of potential in-land wind park locations will be the main application for these simulations. Development of the LES methodology to simulate the atmospheric flows over realistic terrains is reported in the thesis. The work also aims at validating the LES methodology at a real scale. In the thesis, LES are carried out for flow problems ranging from basic channel flows to real atmospheric flows over one of the most recent real-life complex terrain problems, the Bolund hill. All the simulations reported in the thesis are carried out using a new OpenFOAM® -based LES solver. The solver uses the 4th order time-accurate Runge-Kutta scheme and a fractional step method. Moreover, development of the LES methodology includes special attention to two boundary conditions: the upstream (inflow) and wall boundary conditions. The upstream boundary condition is generated by using the so-called recycling technique, in which the instantaneous flow properties are sampled on aplane downstream of the inlet and mapped back to the inlet at each time step. This technique develops the upstream boundary-layer flow together with the inflow turbulence without using any precursor simulation and thus within a single computational domain. The roughness of the terrain surface is modeled by implementing a new wall function into OpenFOAM® during the thesis work. Both, the recycling method and the newly implemented wall function, are validated for the channel flows at relatively high Reynolds number before applying them to the atmospheric flow applications. After validating the LES model over simple flows, the simulations are carried out for atmospheric boundary-layer flows over two types of hills: first, two-dimensional wind-tunnel hill profiles and second, the Bolund hill located in Roskilde Fjord, Denmark. For the twodimensional wind-tunnel hills, the study focuses on the overall flow behavior as a function of the hill slope. Moreover, the simulations are repeated using another wall function suitable for smooth surfaces, which already existed in OpenFOAM® , in order to study the sensitivity of the flow to the surface roughness in ABL flows. The simulated results obtained using the two wall functions are compared against the wind-tunnel measurements. It is shown that LES using the implemented wall function produces overall satisfactory results on the turbulent flow over the two-dimensional hills. The prediction of the flow separation and reattachment-length for the steeper hill is closer to the measurements than the other numerical studies reported in the past for the same hill geometry. The field measurement campaign performed over the Bolund hill provides the most recent field-experiment dataset for the mean flow and the turbulence properties. A number of research groups have simulated the wind flows over the Bolund hill. Due to the challenging features of the hill such as the almost vertical hill slope, it is considered as an ideal experimental test case for validating micro-scale CFD models for wind energy applications. In this work, the simulated results obtained for two wind directions are compared against the field measurements. It is shown that the present LES can reproduce the complex turbulent wind flow structures over a complicated terrain such as the Bolund hill. Especially, the present LES results show the best prediction of the turbulent kinetic energy with an average error of 24.1%, which is a 43% smaller than any other model results reported in the past for the Bolund case. Finally, the validated LES methodology is demonstrated to simulate the wind flow over the existing Muukko wind farm located in South-Eastern Finland. The simulation is carried out only for one wind direction and the results on the instantaneous and time-averaged wind speeds are briefly reported. The demonstration case is followed by discussions on the practical aspects of LES for the wind resource assessment over a realistic inland wind farm.

Spatial modeling techniques for mapping and characterization of acid sulfate soils

Acid sulfate (a.s.) soils constitute a major environmental issue. Severe ecological damage results from the considerable amounts of acidity and metals leached by these soils in the recipient watercourses. As even small hot spots may affect large areas of coastal waters, mapping represents a fundamental step in the management and mitigation of a.s. soil environmental risks (i.e. to target strategic areas). Traditional mapping in the field is time-consuming and therefore expensive. Additional more cost-effective techniques have, thus, to be developed in order to narrow down and define in detail the areas of interest. The primary aim of this thesis was to assess different spatial modeling techniques for a.s. soil mapping, and the characterization of soil properties relevant for a.s. soil environmental risk management, using all available data: soil and water samples, as well as datalayers (e.g. geological and geophysical). Different spatial modeling techniques were applied at catchment or regional scale. Two artificial neural networks were assessed on the Sirppujoki River catchment (c. 440 km2) located in southwestern Finland, while fuzzy logic was assessed on several areas along the Finnish coast. Quaternary geology, aerogeophysics and slope data (derived from a digital elevation model) were utilized as evidential datalayers. The methods also required the use of point datasets (i.e. soil profiles corresponding to known a.s. or non-a.s. soil occurrences) for training and/or validation within the modeling processes. Applying these methods, various maps were generated: probability maps for a.s. soil occurrence, as well as predictive maps for different soil properties (sulfur content, organic matter content and critical sulfide depth). The two assessed artificial neural networks (ANNs) demonstrated good classification abilities for a.s. soil probability mapping at catchment scale. Slightly better results were achieved using a Radial Basis Function (RBF) -based ANN than a Radial Basis Functional Link Net (RBFLN) method, narrowing down more accurately the most probable areas for a.s. soil occurrence and defining more properly the least probable areas. The RBF-based ANN also demonstrated promising results for the characterization of different soil properties in the most probable a.s. soil areas at catchment scale. Since a.s. soil areas constitute highly productive lands for agricultural purpose, the combination of a probability map with more specific soil property predictive maps offers a valuable toolset to more precisely target strategic areas for subsequent environmental risk management. Notably, the use of laser scanning (i.e. Light Detection And Ranging, LiDAR) data enabled a more precise definition of a.s. soil probability areas, as well as the soil property modeling classes for sulfur content and the critical sulfide depth. Given suitable training/validation points, ANNs can be trained to yield a more precise modeling of the occurrence of a.s. soils and their properties. By contrast, fuzzy logic represents a simple, fast and objective alternative to carry out preliminary surveys, at catchment or regional scale, in areas offering a limited amount of data. This method enables delimiting and prioritizing the most probable areas for a.s soil occurrence, which can be particularly useful in the field. Being easily transferable from area to area, fuzzy logic modeling can be carried out at regional scale. Mapping at this scale would be extremely time-consuming through manual assessment. The use of spatial modeling techniques enables the creation of valid and comparable maps, which represents an important development within the a.s. soil mapping process. The a.s. soil mapping was also assessed using water chemistry data for 24 different catchments along the Finnish coast (in all, covering c. 21,300 km2) which were mapped with different methods (i.e. conventional mapping, fuzzy logic and an artificial neural network). Two a.s. soil related indicators measured in the river water (sulfate content and sulfate/chloride ratio) were compared to the extent of the most probable areas for a.s. soils in the surveyed catchments. High sulfate contents and sulfate/chloride ratios measured in most of the rivers demonstrated the presence of a.s. soils in the corresponding catchments. The calculated extent of the most probable a.s. soil areas is supported by independent data on water chemistry, suggesting that the a.s. soil probability maps created with different methods are reliable and comparable.

Differentiation of autonomic reflex control begins with cellular mechanisms at the first synapse within the nucleus tractus solitarius

Visceral afferents send information via cranial nerves to the nucleus tractus solitarius (NTS). The NTS is the initial step of information processing that culminates in homeostatic reflex responses. Recent evidence suggests that strong afferent synaptic responses in the NTS are most often modulated by depression and this forms a basic principle of central integration of these autonomic pathways. The visceral afferent synapse is uncommonly powerful at the NTS with large unitary response amplitudes and depression rather than facilitation at moderate to high frequencies of activation. Substantial signal depression occurs through multiple mechanisms at this very first brainstem synapse onto second order NTS neurons. This review highlights new approaches to the study of these basic processes featuring patch clamp recordings in NTS brain slices and optical techniques with fluorescent tracers. The vanilloid receptor agonist, capsaicin, distinguishes two classes of second order neurons (capsaicin sensitive or capsaicin resistant) that appear to reflect unmyelinated and myelinated afferent pathways. The differences in cellular properties of these two classes of NTS neurons indicate clear functional differentiation at both the pre- and postsynaptic portions of these first synapses. By virtue of their position at the earliest stage of these pathways, such mechanistic differences probably impart important differentiation in the performance over the entire reflex pathways.

Lean Innovation in Large Companies: a Case of Implementation in R&D

The main objective of the study is to evaluate the impact of Lean Innovation management philosophy on the creativity potential of the large multinational enterprise. A theory of Lean Innovation indicates that the modern company in any industry can successfully combine both waste-decreasing approach and innovative potential promotion through creativity cultivation or, at least, preservation. The theoretical part of the work covers the main factors, pros and cons of Lean thinking and Innovation management separately, along with generalized new product development overview. While the modern international market becomes more accessible for entrepreneural initiatives, small enterprises and start-ups, large international corporations are more subject to adopt the Lean Innovation approach in both operational and product development sectors due to extended resources and capabilities. Moreover, a multinational enterprise is a highly probable pioneer in Lean innovation implementation. The empirical part of the thesis refers to a case of large European enterprise, operating in many markets around the globe, that currently undergoes innovation management adjustments and implementations in product development while already have related themselves with operational process optimization process through Lean thinking. A goal of the work is to understand what kind of difficulties and consequences a large international firm faces when dealing with Lean Innovation to improve own performance, if they can be sealed for generalized approach.

Results of CHOP chemotherapy for diffuse large B-cell lymphoma

Patients with diffuse large B-cell lymphoma treated in a University Hospital were studied from 1990 to 2001. Two treatment regimens were used: ProMACE-CytaBOM and then, from November 1996 on, the CHOP regimen. Complete remission (CR), disease-free survival (DFS), and overall survival (OS) rates were determined. Primary refractory patients and relapsed patients were also assessed. A total of 111 patients under 60 years of age were assessed and ranked according to the international prognostic index adjusted to age. Twenty (18%) of them were classified as low risk, 40 (36%) as intermediate risk, 33 (29.7%) as high intermediate risk, and 18 (16.3%) as high risk. Over a five-year period, OS and DFS rates were 71 and 59%, respectively, for all patients. For the same time period, OS and DFS rates were 72.8 and 61.3%, respectively, for 77 patients treated with CHOP chemotherapy and 71.3 and 60% for patients treated with the ProMACE-CytaBOM protocol. There was no significant difference in OS or DFS between the two groups. Eleven of 50 refractory and relapsed patients were consolidated with high doses of chemotherapy. Three received allogenic and 8 autologous bone marrow transplantation. For the latter, CR was 62.5% and mean OS was 41.1 months. The clinical behavior, CR, DFS, and OS of the present patients were similar to those reported in the literature. We conclude that both the CHOP and ProMACE-CytaBOM protocols can be used to treat diffuse large B-cell lymphoma patients, although the CHOP protocol is preferable because of its lower cost and lower toxicity.

Integrated energy storage tank for large scale power-to-gas applications

The global interest towards renewable energy production such as wind and solar energy is increasing, which in turn calls for new energy storage concepts due to the larger share of intermittent energy production. Power-to-gas solutions can be utilized to convert surplus electricity to chemical energy which can be stored for extended periods of time. The energy storage concept explored in this thesis is an integrated energy storage tank connected to an oxy-fuel combustion plant. Using this approach, flue gases from the plant could be fed directly into the storage tank and later converted into synthetic natural gas by utilizing electrolysis-methanation route. This work utilizes computational fluid dynamics to model the desublimation of carbon dioxide inside a storage tank containing cryogenic liquid, such as liquefied natural gas. Numerical modelling enables the evaluation of the transient flow patterns caused by the desublimation, as well as general fluid behaviour inside the tank. Based on simulations the stability of the cryogenic storage and the magnitude of the key parameters can be evaluated.

p53 immunostaining is correlated with reduced survival and is not correlated with gene mutations in resected pulmonary large cell carcinomas

Malignancy of pulmonary large cell carcinomas (LCC) increases from classic LCC through LCC with neuroendocrine morphology (LCCNM) to large cell neuroendocrine carcinomas (LCNEC). However, the histological classification has sometimes proved to be difficult. Because the malignancy of LCC is highly dependent on proteins with functions in the cell cycle, DNA repair, and apoptosis, p53 has been targeted as a potentially useful biological marker. p53 mutations in lung cancers have been shown to result in expression and protein expression also occurs in the absence of mutations. To validate the importance of both p53 protein expression (by immunostaining) and p53 gene mutations in lung LCC (by PCR-single strand conformational polymorphism analysis of exons 5, 6, 7, and 8) and to study their relationships with clinical factors and sub-classification we investigated the correlation of p53 abnormalities in 15 patients with LCC (5 classic LCC, 5 LCNEC, and 5 LCCNM) who had undergone resection with curative intent. Of these patients, 5/15 expressed p53 and none had mutant p53 sequences. There was a negative survival correlation with positive p53 immunostaining (P = 0.05). After adjustment for stage, age, gender, chemotherapy, radiotherapy, and histological subtypes by multivariate analysis, p53 expression had an independent impact on survival. The present study indicates that p53 assessment may provide an objective marker for the prognosis of LCC irrespective of morphological variants and suggests that p53 expression is important for outcome prediction in patients with the early stages of LCC. The results reported here should be considered to be initial results because tumors from only 15 patients were studied: 5 each from LCC, LCNEC and LCCNM. This was due to the rarity of these specific diseases.

Postimerkit merisotataidon dokumentteina : Britannian ja Saksan laivastojen varustelu maailmansotien välisenä aikana

Merisodassa tapahtunut muutos – erityisesti konevoiman syrjäyttäessä purjeet ja raudan korvatessa puumateriaalin 1800-luvun loppupuolella – johti nykypäivänäkin merkittäviin merisodan teoreettisiin tarkasteluihin. Teorioihin pohjautuneet merisotataidon yleisperiaatteet saivat ensimmäisen maailmansodan aikana käytännön testauksensa. Voittajat ja häviäjät analysoivat taistelut sekä maailmalla vallinneen ripeän teknisen kehityksen, minkä seurauksena laivastojen varustelu kiihtyi uudestaan valtapolitiikan tueksi. Maailmansotien välisenä aikana pyrittiin kansainvälisin sopimuksin säätelemään suurten laivastojen, kuten Britannian, Ranskan, Italian, Japanin ja Yhdysvaltojen varustelukilpailua. Versaillesin rauhansopimus rajoitti samanaikaisesti Saksan merivoimien kokoa. Tässä työssä tutkitaan Britannian ja Saksan merivoimien varustelua ja merisotataidon kehittymistä maailmansotien välisenä aikana. Merisotataidon kehittymisen tarkastelu tapahtuu postimerkkien avulla. Postimerkki syntyi Englannissa vuonna 1840 ja sen käyttö yleistyi ympäri maailman lähes samanaikaisesti konevoimaa käyttäneiden laivojen kanssa. Postimerkkien kuva-aiheet olivat aluksi valtioiden päämiehiä, heraldiikkaa, maisemia tai abstrakteja aiheita. Vasta 1900-luvun alkupuolella kuva-aiheina saattoi olla lähes mitä vain, myös sotalaivojen kuvia. Postimerkkikokoelmastani erottuu tutkimusaiheeseen 335 merkkiä. Britannian ja Saksan kansallisarkistojen alkuperäislähteiden ja tutkimuskirjallisuuden dokumenttianalyysiin perustuvaa merisotataidon moninaista kehitystä verrataan tutkimuksessani postimerkkien kuva-aiheisiin ja niiden yksityiskohtiin 3 300 kertaa. Tällä menettelyllä pyrin selvittämään voiko postimerkkejä käyttää ja pitää merisotaidon kehityksen kattavina dokumentteina. Postimerkeissä satunnaisiksi jääneet virheet tai propaganda eivät vähennä merisotataidon kehityksen kuvaamisen dokumenttiarvoa. Postimerkkien sotalaivoihin liittyvät kuvat kattavat muutamaa laivaluokkaa lukuunottamatta molempien maiden kaikki taistelualuslajit- ja luokat. Postimerkeistä voidaan nähdä vanhat sotalaivat, niiden peruskorjaukset ja uudet luokat lentotukialuksista sukellusveneisiin. Alusten kuvat voidaan liittää Britannian kansainyhteisön muuttuneisiin strategisiin ja taktisiin tavoitteisiin niin Atlantilla kuin Kaukoidässä. Saksan merivoimien nousu Versaillesin rauhanehtojen rajoituksista ja lopulta pyrkimys Britannian kauppamerenkulun tuhoajaksi välittyy myös postimerkeistä. Yleinen sotatekninen kehitys, lentoneiden tulo merisotanäyttämölle ja aikanaan kansainvälisten tonnistorajoitusten poistuminen näkyvät postimerkeissä. Kokopostimerkin historian aikana vuoteen 2012 mennessä purjeettomien, nykyaikaisten sotalaivojen kuvia on julkaistu noin 3 350 postimerkillä, jotka on koottu Maailman suurin laivasto-osasto -postimerkkikokoelmaani noin 35 vuoden aikana